ソースを参照

add the first bits of the lab that are installed and functional

main
コミット
229a0e553c
2個のファイルの変更27行の追加0行の削除
  1. +7
    -0
      embedlab1.getxt
  2. +20
    -0
      embedlab1.md

+ 7
- 0
embedlab1.getxt ファイルの表示

@@ -0,0 +1,7 @@
[ Controller ] { label: Controller\n172.30.15.10 }
[ vlan1 ] { label: VLAN 1\n172.30.15.0/24 }
[ router ] { label: Router\n172.30.15.1 }
[ switch ] { label: Switch\n172.30.15.20 }

[ Controller ] -- [ vlan1 ] -- [ router ]
[ vlan1 ] -- [ switch ]

+ 20
- 0
embedlab1.md ファイルの表示

@@ -0,0 +1,20 @@
Embedded Lab 1
==============

This lab is currently located in Oakland, CA.

Due to limitations, there is no static IPv4 address allocated for the
lab controller. Access is through either port forwarding or an HTTPS
proxy to access it. It will have static IPv6 addresses for use.

Hardware
--------

The PoE switch used is the Netgear GS724TPv2. The firmware used is
v1.1.50.39. The original firmware, v1.1.1.25, did not support the standard
PoE SNMP MIB (RFC 3621).

There is a bug, [issue #194](https://github.com/net-snmp/net-snmp/issues/194),
in net-snmp which requires using a timeout of 2 seconds for the snmpset
command to complete successfully. If the default timeout is used, the
commands will execute, but net-snmp will report a timeout error.

読み込み中…
キャンセル
保存