Просмотр исходного кода

add the first bits of the lab that are installed and functional

main
John-Mark Gurney 1 год назад
Родитель
Сommit
229a0e553c
2 измененных файлов: 27 добавлений и 0 удалений
  1. +7
    -0
      embedlab1.getxt
  2. +20
    -0
      embedlab1.md

+ 7
- 0
embedlab1.getxt Просмотреть файл

@@ -0,0 +1,7 @@
[ Controller ] { label: Controller\n172.30.15.10 }
[ vlan1 ] { label: VLAN 1\n172.30.15.0/24 }
[ router ] { label: Router\n172.30.15.1 }
[ switch ] { label: Switch\n172.30.15.20 }

[ Controller ] -- [ vlan1 ] -- [ router ]
[ vlan1 ] -- [ switch ]

+ 20
- 0
embedlab1.md Просмотреть файл

@@ -0,0 +1,20 @@
Embedded Lab 1
==============

This lab is currently located in Oakland, CA.

Due to limitations, there is no static IPv4 address allocated for the
lab controller. Access is through either port forwarding or an HTTPS
proxy to access it. It will have static IPv6 addresses for use.

Hardware
--------

The PoE switch used is the Netgear GS724TPv2. The firmware used is
v1.1.50.39. The original firmware, v1.1.1.25, did not support the standard
PoE SNMP MIB (RFC 3621).

There is a bug, [issue #194](https://github.com/net-snmp/net-snmp/issues/194),
in net-snmp which requires using a timeout of 2 seconds for the snmpset
command to complete successfully. If the default timeout is used, the
commands will execute, but net-snmp will report a timeout error.

Загрузка…
Отмена
Сохранить