Information and documentation on building an embedded board test lab.
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符
 
 
 
 

760 B

Embedded Lab 1

This lab is currently located in Oakland, CA.

Due to limitations, there is no static IPv4 address allocated for the lab controller. Access is through either port forwarding or an HTTPS proxy to access it. It will have static IPv6 addresses for use.

Hardware

The PoE switch used is the Netgear GS724TPv2. The firmware used is v1.1.50.39. The original firmware, v1.1.1.25, did not support the standard PoE SNMP MIB (RFC 3621).

There is a bug, issue #194, in net-snmp which requires using a timeout of 2 seconds for the snmpset command to complete successfully. If the default timeout is used, the commands will execute, but net-snmp will report a timeout error.