Merge branch 'master' of https://github.com/jmichault/flash_cc2531

README.md

@@ -2,7 +2,8 @@
 flash CC2531 USB dongle from your Raspberry, without Arduino nor CC Debugger.
 
 ## prerequisites
-A Raspberry Pi 3 with raspbian and [wiringPi](http://wiringpi.com/) installed.
+You need a Raspberry with [wiringPi](http://wiringpi.com/) installed.  
+I have designed flash_cc2531 on a Raspberry Pi 3 with raspbian, but successful flashes have been reported on pi 1 and pi 2 : see sections [use other pins](#use-other-pins) and [what to try if it doesn't work](#what-to-try-if-it-doesnt-work).
 
 ## Getting Started
 
@@ -48,11 +49,11 @@ To erase the flash :
 
 To flash file to cc2531 :
 ```bash
-./cc_write CC2531ZNP-Pro.hex
+./cc_write CC2531ZNP-Prod.hex
 ```
 (takes around 3 minutes).
 
-## Using other pins
+## Use other pins
 all commands accept following arguments :
 ```bash
         -c pin : change pin_DC (default 27)
@@ -74,7 +75,7 @@ and now you can read chip id, save flash content, erase flash, and write flash w
 ./cc_chipid -r 8 -c 0 -d 2
 ./cc_read -r 8 -c 0 -d 2 save.hex
 ./cc_erase -r 8 -c 0 -d 2
-./cc_write -r 8 -c 0 -d 2 CC2531ZNP-Pro.hex
+./cc_write -r 8 -c 0 -d 2 CC2531ZNP-Prod.hex
 ```
 
 You can also change default values in CCDebugger.h and recompile executables with make.
@@ -89,9 +90,9 @@ exit
 ```
 3. use the -m option to increase time delays used. Example :
 ```bash
-./cc_write -m 300 CC2531ZNP-Pro.hex
+./cc_write -m 300 CC2531ZNP-Prod.hex
 ```
-4. executables are compiled on my raspbian distribition, you can try to recompile for your distribution with make.
+4. executables are compiled on my raspbian distribution, you can try to recompile for your distribution with make.
 
 ## License