/*!
 * \file      board.c
 *
 * \brief     Target board general functions implementation
 *
 * \copyright Revised BSD License, see section \ref LICENSE.
 *
 * \code
 *                ______                              _
 *               / _____)             _              | |
 *              ( (____  _____ ____ _| |_ _____  ____| |__
 *               \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 *               _____) ) ____| | | || |_| ____( (___| | | |
 *              (______/|_____)_|_|_| \__)_____)\____)_| |_|
 *              (C)2013-2017 Semtech
 *
 * \endcode
 *
 * \author    Miguel Luis ( Semtech )
 *
 * \author    Gregory Cristian ( Semtech )
 */
#include "stm32l1xx.h"
#include "utilities.h"
#include "gpio.h"
#include "adc.h"
#include "spi.h"
#include "i2c.h"
#include "uart.h"
#include "timer.h"
#include "sysIrqHandlers.h"
#include "board-config.h"
#include "lpm-board.h"
#include "rtc-board.h"

#if defined( SX1261MBXBAS ) || defined( SX1262MBXCAS ) || defined( SX1262MBXDAS )
    #include "sx126x-board.h"
#elif defined( LR1110MB1XXS )
    #include "lr1110-board.h"
#elif defined( SX1272MB2DAS)
    #include "sx1272-board.h"
#elif defined( SX1276MB1LAS ) || defined( SX1276MB1MAS )
    #include "sx1276-board.h"
#endif
#include "board.h"

#include <sysinit.h>

#include <usb_device.h>

/*!
 * Unique Devices IDs register set ( STM32L152x )
 */
#define         ID1                                 ( 0x1FF800D0 )
#define         ID2                                 ( 0x1FF800D4 )
#define         ID3                                 ( 0x1FF800E4 )

/*!
 * LED GPIO pins objects
 */
Gpio_t Led1;
Gpio_t Led2;

/*
 * MCU objects
 */
Adc_t  Adc;
Uart_t Uart2;

#if defined( LR1110MB1XXS )
    extern lr1110_t LR1110;
#endif

/*!
 * Initializes the unused GPIO to a know status
 */
static void BoardUnusedIoInit( void );

/*!
 * System Clock Configuration
 */
static void SystemClockConfig( void );

/*!
 * System Clock Re-Configuration when waking up from STOP mode
 */
static void SystemClockReConfig( void );

/*!
 * Flag to indicate if the MCU is Initialized
 */
static bool McuInitialized = false;

/*!
 * Flag used to indicate if board is powered from the USB
 */
static bool UsbIsConnected = false;

/*!
 * UART2 FIFO buffers size
 */
#define UART2_FIFO_TX_SIZE                                1024
#define UART2_FIFO_RX_SIZE                                1024

uint8_t Uart2TxBuffer[UART2_FIFO_TX_SIZE];
uint8_t Uart2RxBuffer[UART2_FIFO_RX_SIZE];

void BoardCriticalSectionBegin( uint32_t *mask )
{
    *mask = __get_PRIMASK( );
    __disable_irq( );
}

void BoardCriticalSectionEnd( uint32_t *mask )
{
    __set_PRIMASK( *mask );
}

void BoardInitPeriph( void )
{

}

void BoardInitMcu( void )
{
    if( McuInitialized == false )
    {
#if 0
        // LEDs
        GpioInit( &Led1, LED_1, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 );
        GpioInit( &Led2, LED_2, PIN_OUTPUT, PIN_PUSH_PULL, PIN_NO_PULL, 0 );
#else
	GPIO_InitTypeDef GPIO_InitStruct;

	__HAL_RCC_GPIOC_CLK_ENABLE();
	__HAL_RCC_GPIOH_CLK_ENABLE();
	__HAL_RCC_GPIOA_CLK_ENABLE();
	__HAL_RCC_GPIOB_CLK_ENABLE();

	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3|GPIO_PIN_4, GPIO_PIN_RESET);

	/* configure PA3 and PA4 */
	GPIO_InitStruct = (GPIO_InitTypeDef){
		.Pin = GPIO_PIN_3|GPIO_PIN_4,
		.Mode = GPIO_MODE_OUTPUT_PP,
		.Pull = GPIO_NOPULL,
		.Speed = GPIO_SPEED_FREQ_LOW,
	};
	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

	/* configure PB0, PB1, PB10 and PB11 */
	GPIO_InitStruct = (GPIO_InitTypeDef){
		.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_10|GPIO_PIN_11,
		.Mode = GPIO_MODE_INPUT,
		.Pull = GPIO_NOPULL,
		.Speed = GPIO_SPEED_FREQ_LOW,
	};
	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_RESET);

	/* configure PB8 */
	GPIO_InitStruct = (GPIO_InitTypeDef){
		.Pin = GPIO_PIN_8,
		.Mode = GPIO_MODE_OUTPUT_PP,
		.Pull = GPIO_NOPULL,
		.Speed = GPIO_SPEED_FREQ_LOW,
	};
	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
#endif

        SystemClockConfig( );

        UsbIsConnected = true;

        FifoInit( &Uart2.FifoTx, Uart2TxBuffer, UART2_FIFO_TX_SIZE );
        FifoInit( &Uart2.FifoRx, Uart2RxBuffer, UART2_FIFO_RX_SIZE );
        // Configure your terminal for 8 Bits data (7 data bit + 1 parity bit), no parity and no flow ctrl
        UartInit( &Uart2, UART_2, UART_TX, UART_RX );
        UartConfig( &Uart2, RX_TX, 921600, UART_8_BIT, UART_1_STOP_BIT, NO_PARITY, NO_FLOW_CTRL );

        RtcInit( );

        BoardUnusedIoInit( );
        if( GetBoardPowerSource( ) == BATTERY_POWER )
        {
            // Disables OFF mode - Enables lowest power mode (STOP)
            LpmSetOffMode( LPM_APPLI_ID, LPM_DISABLE );
        }
    }
    else
    {
        SystemClockReConfig( );
    }

    AdcInit( &Adc, PB_15 );  // Just initialize ADC

	/* setup routing */
	__HAL_RI_IOSWITCH_CLOSE(RI_IOSWITCH_CH21);
	__HAL_RI_SWITCHCONTROLMODE_ENABLE();

#if defined( SX1261MBXBAS ) || defined( SX1262MBXCAS ) || defined( SX1262MBXDAS )
    SpiInit( &SX126x.Spi, SPI_1, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC );
    SX126xIoInit( );
#elif defined( LR1110MB1XXS )
    SpiInit( &LR1110.spi, SPI_1, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC );
    lr1110_board_init_io( &LR1110 );
#elif defined( SX1272MB2DAS )
    SpiInit( &SX1272.Spi, SPI_1, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC );
    SX1272IoInit( );
#elif defined( SX1276MB1LAS ) || defined( SX1276MB1MAS )
    SpiInit( &SX1276.Spi, SPI_1, RADIO_MOSI, RADIO_MISO, RADIO_SCLK, NC );
    SX1276IoInit( );
#endif

    if( McuInitialized == false )
    {
        McuInitialized = true;
#if defined( SX1261MBXBAS ) || defined( SX1262MBXCAS ) || defined( SX1262MBXDAS )
        SX126xIoDbgInit( );
        // WARNING: If necessary the TCXO control is initialized by SX126xInit function.
#elif defined( LR1110MB1XXS )
        lr1110_board_init_dbg_io( &LR1110 );
        // WARNING: If necessary the TCXO control is initialized by SX126xInit function.
#elif defined( SX1272MB2DAS )
        SX1272IoDbgInit( );
        SX1272IoTcxoInit( );
#elif defined( SX1276MB1LAS ) || defined( SX1276MB1MAS )
        SX1276IoDbgInit( );
        SX1276IoTcxoInit( );
#endif
    }
}
SYSINIT_VF(initmcu, SI_SUB_HAL, SI_ORDER_SECOND, BoardInitMcu);

void BoardResetMcu( void )
{
    CRITICAL_SECTION_BEGIN( );

    //Restart system
    NVIC_SystemReset( );
}

void BoardDeInitMcu( void )
{
    AdcDeInit( &Adc );

#if defined( SX1261MBXBAS ) || defined( SX1262MBXCAS ) || defined( SX1262MBXDAS )
    SpiDeInit( &SX126x.Spi );
    SX126xIoDeInit( );
#elif defined( LR1110MB1XXS )
    SpiDeInit( &LR1110.spi );
    lr1110_board_deinit_io( &LR1110 );
#elif defined( SX1272MB2DAS )
    SpiDeInit( &SX1272.Spi );
    SX1272IoDeInit( );
#elif defined( SX1276MB1LAS ) || defined( SX1276MB1MAS )
    SpiDeInit( &SX1276.Spi );
    SX1276IoDeInit( );
#endif
}

uint32_t BoardGetRandomSeed( void )
{
    return ( ( *( uint32_t* )ID1 ) ^ ( *( uint32_t* )ID2 ) ^ ( *( uint32_t* )ID3 ) );
}

void BoardGetUniqueId( uint8_t *id )
{
    id[7] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 24;
    id[6] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 16;
    id[5] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 8;
    id[4] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) );
    id[3] = ( ( *( uint32_t* )ID2 ) ) >> 24;
    id[2] = ( ( *( uint32_t* )ID2 ) ) >> 16;
    id[1] = ( ( *( uint32_t* )ID2 ) ) >> 8;
    id[0] = ( ( *( uint32_t* )ID2 ) );
}

/*!
 * Factory power supply
 */
#define VDDA_VREFINT_CAL ( ( uint32_t ) 3000 )  // mV

/*!
 * VREF calibration value
 */
#define VREFINT_CAL ( *( uint16_t* ) ( ( uint32_t ) 0x1FF800F8 ) )

/*
 * Internal temperature sensor, parameter TS_CAL1: TS ADC raw data acquired at
 * a temperature of 110 DegC (+-5 DegC), VDDA = 3.3 V (+-10 mV).
 */
#define TEMP30_CAL_ADDR ( *( uint16_t* ) ( ( uint32_t ) 0x1FF8007A ) )

/* Internal temperature sensor, parameter TS_CAL2: TS ADC raw data acquired at
 *a temperature of  30 DegC (+-5 DegC), VDDA = 3.3 V (+-10 mV). */
#define TEMP110_CAL_ADDR ( *( uint16_t* ) ( ( uint32_t ) 0x1FF8007E ) )

/* Vdda value with which temperature sensor has been calibrated in production
   (+-10 mV). */
#define VDDA_TEMP_CAL ( ( uint32_t ) 3000 )

/*!
 * Battery thresholds
 */
#define BATTERY_MAX_LEVEL 3000       // mV
#define BATTERY_MIN_LEVEL 2400       // mV
#define BATTERY_SHUTDOWN_LEVEL 2300  // mV

#define BATTERY_LORAWAN_UNKNOWN_LEVEL 255
#define BATTERY_LORAWAN_MAX_LEVEL 254
#define BATTERY_LORAWAN_MIN_LEVEL 1
#define BATTERY_LORAWAN_EXT_PWR 0

#define COMPUTE_TEMPERATURE( TS_ADC_DATA, VDDA_APPLI )                                                          \
    ( ( ( ( ( ( ( int32_t )( ( TS_ADC_DATA * VDDA_APPLI ) / VDDA_TEMP_CAL ) - ( int32_t ) TEMP30_CAL_ADDR ) ) * \
            ( int32_t )( 110 - 30 ) )                                                                           \
          << 8 ) /                                                                                              \
        ( int32_t )( TEMP110_CAL_ADDR - TEMP30_CAL_ADDR ) ) +                                                   \
      ( 30 << 8 ) )

static uint16_t BatteryVoltage = BATTERY_MAX_LEVEL;

uint16_t BoardBatteryMeasureVoltage( void )
{
    uint16_t vref = 0;

    // Read the current Voltage
    vref = AdcReadChannel( &Adc, ADC_CHANNEL_VREFINT );

    // Compute and return the Voltage in millivolt
    return ( ( ( uint32_t ) VDDA_VREFINT_CAL * VREFINT_CAL ) / vref );
}

uint32_t BoardGetBatteryVoltage( void )
{
    return BatteryVoltage;
}

uint8_t BoardGetBatteryLevel( void )
{
    uint8_t batteryLevel = 0;

    BatteryVoltage = BoardBatteryMeasureVoltage( );

    if( GetBoardPowerSource( ) == USB_POWER )
    {
        batteryLevel = BATTERY_LORAWAN_EXT_PWR;
    }
    else
    {
        if( BatteryVoltage >= BATTERY_MAX_LEVEL )
        {
            batteryLevel = BATTERY_LORAWAN_MAX_LEVEL;
        }
        else if( ( BatteryVoltage > BATTERY_MIN_LEVEL ) && ( BatteryVoltage < BATTERY_MAX_LEVEL ) )
        {
            batteryLevel =
                ( ( 253 * ( BatteryVoltage - BATTERY_MIN_LEVEL ) ) / ( BATTERY_MAX_LEVEL - BATTERY_MIN_LEVEL ) ) + 1;
        }
        else if( ( BatteryVoltage > BATTERY_SHUTDOWN_LEVEL ) && ( BatteryVoltage <= BATTERY_MIN_LEVEL ) )
        {
            batteryLevel = 1;
        }
        else  // if( BatteryVoltage <= BATTERY_SHUTDOWN_LEVEL )
        {
            batteryLevel = BATTERY_LORAWAN_UNKNOWN_LEVEL;
        }
    }
    return batteryLevel;
}

int16_t BoardGetTemperature( void )
{
    uint16_t tempRaw = 0;

    BatteryVoltage = BoardBatteryMeasureVoltage( );

    tempRaw = AdcReadChannel( &Adc, ADC_CHANNEL_TEMPSENSOR );

    // Compute and return the temperature in degree celcius * 256
    return ( int16_t ) COMPUTE_TEMPERATURE( tempRaw, BatteryVoltage );
}

static void BoardUnusedIoInit( void )
{
    HAL_DBGMCU_EnableDBGSleepMode( );
    HAL_DBGMCU_EnableDBGStopMode( );
    HAL_DBGMCU_EnableDBGStandbyMode( );
}

void SystemClockConfig( void )
{
    RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
    RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
    RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 };

    __HAL_RCC_PWR_CLK_ENABLE( );

    __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE1 );

	RCC_OscInitStruct = (RCC_OscInitTypeDef){
		.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE,
		.HSEState = RCC_HSE_ON,
		.LSIState = RCC_LSI_ON,
		.PLL.PLLState = RCC_PLL_ON,
		.PLL.PLLSource = RCC_PLLSOURCE_HSE,
		.PLL.PLLMUL = RCC_PLL_MUL12,
		.PLL.PLLDIV = RCC_PLL_DIV3,
	};
    if( HAL_RCC_OscConfig( &RCC_OscInitStruct ) != HAL_OK )
    {
        assert_param( LMN_STATUS_ERROR );
    }

	RCC_ClkInitStruct = (RCC_ClkInitTypeDef){
		.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
		    |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2,
		.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK,
		.AHBCLKDivider = RCC_SYSCLK_DIV1,
		.APB1CLKDivider = RCC_HCLK_DIV1,
		.APB2CLKDivider = RCC_HCLK_DIV1,
	};
    if( HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_1 ) != HAL_OK )
    {
        assert_param( LMN_STATUS_ERROR );
    }

	PeriphClkInit = (RCC_PeriphCLKInitTypeDef){
		.PeriphClockSelection = RCC_PERIPHCLK_RTC,
		.RTCClockSelection = RCC_RTCCLKSOURCE_LSI,
	};

    if( HAL_RCCEx_PeriphCLKConfig( &PeriphClkInit ) != HAL_OK )
    {
        assert_param( LMN_STATUS_ERROR );
    }

    HAL_SYSTICK_Config( HAL_RCC_GetHCLKFreq( ) / 1000 );

    HAL_SYSTICK_CLKSourceConfig( SYSTICK_CLKSOURCE_HCLK );

    // SysTick_IRQn interrupt configuration
    HAL_NVIC_SetPriority( SysTick_IRQn, 0, 0 );
}

void SystemClockReConfig( void )
{
    __HAL_RCC_PWR_CLK_ENABLE( );
    __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE1 );

    // Enable HSI
    __HAL_RCC_HSI_ENABLE( );

    // Wait till HSI is ready
    while( __HAL_RCC_GET_FLAG( RCC_FLAG_HSIRDY ) == RESET )
    {
    }

    // Enable PLL
    __HAL_RCC_PLL_ENABLE( );

    // Wait till PLL is ready
    while( __HAL_RCC_GET_FLAG( RCC_FLAG_PLLRDY ) == RESET )
    {
    }

    // Select PLL as system clock source
    __HAL_RCC_SYSCLK_CONFIG ( RCC_SYSCLKSOURCE_PLLCLK );

    // Wait till PLL is used as system clock source
    while( __HAL_RCC_GET_SYSCLK_SOURCE( ) != RCC_SYSCLKSOURCE_STATUS_PLLCLK )
    {
    }
}

uint8_t GetBoardPowerSource( void )
{
    if( UsbIsConnected == false )
    {
        return BATTERY_POWER;
    }
    else
    {
        return USB_POWER;
    }
}

/**
  * \brief Enters Low Power Stop Mode
  *
  * \note ARM exists the function when waking up
  */
void LpmEnterStopMode( void)
{
    CRITICAL_SECTION_BEGIN( );

    BoardDeInitMcu( );

    // Disable the Power Voltage Detector
    HAL_PWR_DisablePVD( );

    // Clear wake up flag
    SET_BIT( PWR->CR, PWR_CR_CWUF );

    // Enable Ultra low power mode
    HAL_PWREx_EnableUltraLowPower( );

    // Enable the fast wake up from Ultra low power mode
    HAL_PWREx_EnableFastWakeUp( );

    CRITICAL_SECTION_END( );

    // Enter Stop Mode
    HAL_PWR_EnterSTOPMode( PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI );
}

/*!
 * \brief Exists Low Power Stop Mode
 */
void LpmExitStopMode( void )
{
    // Disable IRQ while the MCU is not running on HSI
    CRITICAL_SECTION_BEGIN( );

    // Initilizes the peripherals
    BoardInitMcu( );

    CRITICAL_SECTION_END( );
}

/*!
 * \brief Enters Low Power Sleep Mode
 *
 * \note ARM exits the function when waking up
 */
void LpmEnterSleepMode( void)
{
    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
}

void BoardLowPowerHandler( void )
{
    __disable_irq( );
    /*!
     * If an interrupt has occurred after __disable_irq( ), it is kept pending
     * and cortex will not enter low power anyway
     */

    LpmEnterLowPower( );

    __enable_irq( );
}

#if !defined ( __CC_ARM )

/*
 * Function to be used by stdout for printf etc
 */
int _write( int fd, const void *buf, size_t count )
{
    while( UartPutBuffer( &Uart2, ( uint8_t* )buf, ( uint16_t )count ) != 0 ){ };
    return count;
}

/*
 * Function to be used by stdin for scanf etc
 */
int _read( int fd, const void *buf, size_t count )
{
    size_t bytesRead = 0;
    while( UartGetBuffer( &Uart2, ( uint8_t* )buf, count, ( uint16_t* )&bytesRead ) != 0 ){ };
    // Echo back the character
    while( UartPutBuffer( &Uart2, ( uint8_t* )buf, ( uint16_t )bytesRead ) != 0 ){ };
    return bytesRead;
}

#else

#include <stdio.h>

// Keil compiler
int fputc( int c, FILE *stream )
{
    while( UartPutChar( &Uart2, ( uint8_t )c ) != 0 );
    return c;
}

int fgetc( FILE *stream )
{
    uint8_t c = 0;
    while( UartGetChar( &Uart2, &c ) != 0 );
    // Echo back the character
    while( UartPutChar( &Uart2, c ) != 0 );
    return ( int )c;
}

#endif

#ifdef USE_FULL_ASSERT

#include <stdio.h>

/*
 * Function Name  : assert_failed
 * Description    : Reports the name of the source file and the source line number
 *                  where the assert_param error has occurred.
 * Input          : - file: pointer to the source file name
 *                  - line: assert_param error line source number
 * Output         : None
 * Return         : None
 */
void assert_failed( uint8_t* file, uint32_t line )
{
    /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %lu\n", file, line) */

    printf( "Wrong parameters value: file %s on line %lu\n", ( const char* )file, line );
    /* Infinite loop */
    while( 1 )
    {
    }
}
#endif