diff --git a/CMSIS/STM32WBxx/Include/stm32wb30xx.h b/CMSIS/STM32WBxx/Include/stm32wb30xx.h new file mode 100644 index 0000000..1518495 --- /dev/null +++ b/CMSIS/STM32WBxx/Include/stm32wb30xx.h @@ -0,0 +1,11130 @@ +/** + ****************************************************************************** + * @file stm32wb30xx.h + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32wb30xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb30xx + * @{ + */ + +#ifndef __STM32WB30xx_H +#define __STM32WB30xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb30xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 global Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Communication and TIM17 global Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of 802.15.4 (Zigbee) activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ +uint32_t RESERVED0[2]; /*!< Reserved, Address offset: 0x10-0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ +uint32_t RESERVED11; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 1 MB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 256 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF8000UL) /*!< Option Bytes : 4kB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 32 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00008000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00010000UL)/*!< SRAM2B(32 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00008000UL /*!< SRAM1 default size : 32 kB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 kB */ +#define SRAM2B_SIZE 0x00008000UL /*!< SRAM2b default size : 32 kB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x20007FFFUL) /*!< SRAM1 : 32KB (0x20000000 - 0x20007FFF) */ +#define SRAM2A_END_ADDR (0x2000FFFFUL) /*!< SRAM2a (backup) : 32KB (0x20008000 - 0x2000FFFF) */ +#define SRAM2B_END_ADDR (0x20017FFFUL) /*!< SRAM2b (non-backup) : 32KB (0x20010000 - 0x20017FFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x50000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x00000030UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003A0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00000100 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00000200 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00000400 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy defines */ +#define ADC_CCR_MULTI (ADC_CCR_DUAL) +#define ADC_CCR_MULTI_0 (ADC_CCR_DUAL_0) +#define ADC_CCR_MULTI_1 (ADC_CCR_DUAL_1) +#define ADC_CCR_MULTI_2 (ADC_CCR_DUAL_2) +#define ADC_CCR_MULTI_3 (ADC_CCR_DUAL_3) +#define ADC_CCR_MULTI_4 (ADC_CCR_DUAL_4) + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ +#define DMAMUX_CSR_SOF7_Pos (7U) +#define DMAMUX_CSR_SOF7_Msk (0x1UL << DMAMUX_CSR_SOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7_Msk /*!< Synchronization Overrun Flag 7 */ +#define DMAMUX_CSR_SOF8_Pos (8U) +#define DMAMUX_CSR_SOF8_Msk (0x1UL << DMAMUX_CSR_SOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8_Msk /*!< Synchronization Overrun Flag 8 */ +#define DMAMUX_CSR_SOF9_Pos (9U) +#define DMAMUX_CSR_SOF9_Msk (0x1UL << DMAMUX_CSR_SOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9_Msk /*!< Synchronization Overrun Flag 9 */ +#define DMAMUX_CSR_SOF10_Pos (10U) +#define DMAMUX_CSR_SOF10_Msk (0x1UL << DMAMUX_CSR_SOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10_Msk /*!< Synchronization Overrun Flag 10 */ +#define DMAMUX_CSR_SOF11_Pos (11U) +#define DMAMUX_CSR_SOF11_Msk (0x1UL << DMAMUX_CSR_SOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11_Msk /*!< Synchronization Overrun Flag 11 */ +#define DMAMUX_CSR_SOF12_Pos (12U) +#define DMAMUX_CSR_SOF12_Msk (0x1UL << DMAMUX_CSR_SOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12_Msk /*!< Synchronization Overrun Flag 12 */ +#define DMAMUX_CSR_SOF13_Pos (13U) +#define DMAMUX_CSR_SOF13_Msk (0x1UL << DMAMUX_CSR_SOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13_Msk /*!< Synchronization Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ +#define DMAMUX_CFR_CSOF7_Pos (7U) +#define DMAMUX_CFR_CSOF7_Msk (0x1UL << DMAMUX_CFR_CSOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7_Msk /*!< Clear Overrun Flag 7 */ +#define DMAMUX_CFR_CSOF8_Pos (8U) +#define DMAMUX_CFR_CSOF8_Msk (0x1UL << DMAMUX_CFR_CSOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8_Msk /*!< Clear Overrun Flag 8 */ +#define DMAMUX_CFR_CSOF9_Pos (9U) +#define DMAMUX_CFR_CSOF9_Msk (0x1UL << DMAMUX_CFR_CSOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9_Msk /*!< Clear Overrun Flag 9 */ +#define DMAMUX_CFR_CSOF10_Pos (10U) +#define DMAMUX_CFR_CSOF10_Msk (0x1UL << DMAMUX_CFR_CSOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10_Msk /*!< Clear Overrun Flag 10 */ +#define DMAMUX_CFR_CSOF11_Pos (11U) +#define DMAMUX_CFR_CSOF11_Msk (0x1UL << DMAMUX_CFR_CSOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11_Msk /*!< Clear Overrun Flag 11 */ +#define DMAMUX_CFR_CSOF12_Pos (12U) +#define DMAMUX_CFR_CSOF12_Msk (0x1UL << DMAMUX_CFR_CSOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12_Msk /*!< Clear Overrun Flag 12 */ +#define DMAMUX_CFR_CSOF13_Pos (13U) +#define DMAMUX_CFR_CSOF13_Msk (0x1UL << DMAMUX_CFR_CSOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13_Msk /*!< Clear Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT20_Pos (20U) +#define EXTI_RTSR1_RT20_Msk (0x1UL << EXTI_RTSR1_RT20_Pos) /*!< 0x00100000 */ +#define EXTI_RTSR1_RT20 EXTI_RTSR1_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR1_RT21_Pos (21U) +#define EXTI_RTSR1_RT21_Msk (0x1UL << EXTI_RTSR1_RT21_Pos) /*!< 0x00200000 */ +#define EXTI_RTSR1_RT21 EXTI_RTSR1_RT21_Msk /*!< Rising trigger event configuration bit of line 21 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM46_Pos (14U) +#define EXTI_IMR2_IM46_Msk (0x1UL << EXTI_IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_IMR2_IM46 EXTI_IMR2_IM46_Msk /*!< CPU1 Interrupt Mask on line 46 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM46_Pos (14U) +#define EXTI_C2IMR2_IM46_Msk (0x1UL << EXTI_C2IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR2_IM46 EXTI_C2IMR2_IM46_Msk /*!< CPU2 Interrupt Mask on line 46 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFFUL << FLASH_CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x1FFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x1FFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x1FFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x1FFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0xFFUL << FLASH_SFR_SFSA_Pos) /*!< 0x000000FF */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (8U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x3FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0003FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* SCPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_Pos (18U) +#define FLASH_SRRVR_SBRSA_Msk (0x1FUL << FLASH_SRRVR_SBRSA_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA FLASH_SRRVR_SBRSA_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_Pos (23U) +#define FLASH_SRRVR_BRSD_Msk (0x1UL << FLASH_SRRVR_BRSD_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD FLASH_SRRVR_BRSD_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SNBRSA_Pos (25U) +#define FLASH_SRRVR_SNBRSA_Msk (0x1FUL << FLASH_SRRVR_SNBRSA_Pos) /*!< 0x3E000000 */ +#define FLASH_SRRVR_SNBRSA FLASH_SRRVR_SNBRSA_Msk /* Secure non-backup SRAM2b start address */ +#define FLASH_SRRVR_NBRSD_Pos (30U) +#define FLASH_SRRVR_NBRSD_Msk (0x1UL << FLASH_SRRVR_NBRSD_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_NBRSD FLASH_SRRVR_NBRSD_Msk /* Non-backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* SCPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0xFFUL << FLASH_C2CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!
© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb35xx + * @{ + */ + +#ifndef __STM32WB35xx_H +#define __STM32WB35xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb35xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ + USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt (including USB wakeup) */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + COMP_IRQn = 22, /*!< COMP1 and COMP2 Interrupts */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 global Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Communication and TIM17 global Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + I2C3_EV_IRQn = 32, /*!< I2C3 Event Interrupt */ + I2C3_ER_IRQn = 33, /*!< I2C3 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + SPI2_IRQn = 35, /*!< SPI2 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + LPUART1_IRQn = 37, /*!< LPUART1 Interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + CRS_IRQn = 42, /*!< CRS interrupt */ + PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of 802.15.4 (Zigbee) activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + QUADSPI_IRQn = 50, /*!< QUADSPI Interrupt */ + AES1_IRQn = 51, /*!< AES1 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMA2_Channel1_IRQn = 55, /*!< DMA2 Channel 1 Interrupt */ + DMA2_Channel2_IRQn = 56, /*!< DMA2 Channel 2 Interrupt */ + DMA2_Channel3_IRQn = 57, /*!< DMA2 Channel 3 Interrupt */ + DMA2_Channel4_IRQn = 58, /*!< DMA2 Channel 4 Interrupt */ + DMA2_Channel5_IRQn = 59, /*!< DMA2 Channel 5 Interrupt */ + DMA2_Channel6_IRQn = 60, /*!< DMA2 Channel 6 Interrupt */ + DMA2_Channel7_IRQn = 61, /*!< DMA2 Channel 7 Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ +uint32_t RESERVED0[2]; /*!< Reserved, Address offset: 0x10-0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t SMPSCR; /*!< RCC SMPS step-down converter control register, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Touch Sensing Controller (TSC) + */ +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */ +} TSC_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ + __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint16_t RESERVEDD; /*!< Reserved */ + __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ + __IO uint16_t RESERVEDE; /*!< Reserved */ +} USB_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 1 MB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 256 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF8000UL) /*!< Option Bytes : 4kB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 32 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00008000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00010000UL)/*!< SRAM2B(32 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00008000UL /*!< SRAM1 default size : 32 kB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 kB */ +#define SRAM2B_SIZE 0x00008000UL /*!< SRAM2b default size : 32 kB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x20007FFFUL) /*!< SRAM1 : 32KB (0x20000000 - 0x20007FFF) */ +#define SRAM2A_END_ADDR (0x2000FFFFUL) /*!< SRAM2a (backup) : 32KB (0x20008000 - 0x2000FFFF) */ +#define SRAM2B_END_ADDR (0x20017FFFUL) /*!< SRAM2b (non-backup) : 32KB (0x20010000 - 0x20017FFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x50000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x00005C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x00006000UL) +#define USB1_BASE (APB1PERIPH_BASE + 0x00006800UL) +#define USB1_PMAADDR (APB1PERIPH_BASE + 0x00006C00UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define COMP1_BASE (APB2PERIPH_BASE + 0x00000200UL) +#define COMP2_BASE (APB2PERIPH_BASE + 0x00000204UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x00000400UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008UL) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001CUL) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030UL) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044UL) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058UL) +#define DMA2_Channel6_BASE (DMA2_BASE + 0x0000006CUL) +#define DMA2_Channel7_BASE (DMA2_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) +#define DMAMUX1_Channel7_BASE (DMAMUX1_BASE + 0x0000001CUL) +#define DMAMUX1_Channel8_BASE (DMAMUX1_BASE + 0x00000020UL) +#define DMAMUX1_Channel9_BASE (DMAMUX1_BASE + 0x00000024UL) +#define DMAMUX1_Channel10_BASE (DMAMUX1_BASE + 0x00000028UL) +#define DMAMUX1_Channel11_BASE (DMAMUX1_BASE + 0x0000002CUL) +#define DMAMUX1_Channel12_BASE (DMAMUX1_BASE + 0x00000030UL) +#define DMAMUX1_Channel13_BASE (DMAMUX1_BASE + 0x00000034UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + +#define AES1_BASE (AHB2PERIPH_BASE + 0x08060000UL) + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ +#define QUADSPI_BASE (AHB3PERIPH_BASE + 0x00000000UL) /*!< QUADSPI memories accessible over AHB base address */ +#define QUADSPI_R_BASE (AHB3PERIPH_BASE + 0x10001000UL) /*!< QUADSPI control registers base address */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define USB ((USB_TypeDef *) USB1_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) +#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) +#define DMAMUX1_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel7_BASE) +#define DMAMUX1_Channel8 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel8_BASE) +#define DMAMUX1_Channel9 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel9_BASE) +#define DMAMUX1_Channel10 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel10_BASE) +#define DMAMUX1_Channel11 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel11_BASE) +#define DMAMUX1_Channel12 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel12_BASE) +#define DMAMUX1_Channel13 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel13_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + +#define AES1 ((AES_TypeDef *) AES1_BASE) + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ +#define QUADSPI ((QUADSPI_TypeDef *) QUADSPI_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003A0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00000100 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00000200 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00000400 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy defines */ +#define ADC_CCR_MULTI (ADC_CCR_DUAL) +#define ADC_CCR_MULTI_0 (ADC_CCR_DUAL_0) +#define ADC_CCR_MULTI_1 (ADC_CCR_DUAL_1) +#define ADC_CCR_MULTI_2 (ADC_CCR_DUAL_2) +#define ADC_CCR_MULTI_3 (ADC_CCR_DUAL_3) +#define ADC_CCR_MULTI_4 (ADC_CCR_DUAL_4) + +/******************************************************************************/ +/* */ +/* Analog Comparators (COMP) */ +/* */ +/******************************************************************************/ +/********************** Bit definition for COMP_CSR register ***************/ +#define COMP_CSR_EN_Pos (0U) +#define COMP_CSR_EN_Msk (0x1UL << COMP_CSR_EN_Pos) /*!< 0x00000001 */ +#define COMP_CSR_EN COMP_CSR_EN_Msk /*!< Comparator enable */ +#define COMP_CSR_PWRMODE_Pos (2U) +#define COMP_CSR_PWRMODE_Msk (0x3UL << COMP_CSR_PWRMODE_Pos) /*!< 0x0000000C */ +#define COMP_CSR_PWRMODE COMP_CSR_PWRMODE_Msk /*!< Comparator power mode */ +#define COMP_CSR_PWRMODE_0 (0x1UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000004 */ +#define COMP_CSR_PWRMODE_1 (0x2UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000008 */ +#define COMP_CSR_INMSEL_Pos (4U) +#define COMP_CSR_INMSEL_Msk (0x7UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000070 */ +#define COMP_CSR_INMSEL COMP_CSR_INMSEL_Msk /*!< Comparator input minus selection */ +#define COMP_CSR_INMSEL_0 (0x1UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000010 */ +#define COMP_CSR_INMSEL_1 (0x2UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000020 */ +#define COMP_CSR_INMSEL_2 (0x4UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000040 */ +#define COMP_CSR_INPSEL_Pos (7U) +#define COMP_CSR_INPSEL_Msk (0x3UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000180 */ +#define COMP_CSR_INPSEL COMP_CSR_INPSEL_Msk /*!< Comparator input plus selection */ +#define COMP_CSR_INPSEL_0 (0x1UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000080 */ +#define COMP_CSR_INPSEL_1 (0x2UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000100 */ +#define COMP_CSR_WINMODE_Pos (9U) +#define COMP_CSR_WINMODE_Msk (0x1UL << COMP_CSR_WINMODE_Pos) /*!< 0x00000200 */ +#define COMP_CSR_WINMODE COMP_CSR_WINMODE_Msk /*!< Pair of comparators window mode. Bit intended to be used with COMP common instance (COMP_Common_TypeDef) */ +#define COMP_CSR_POLARITY_Pos (15U) +#define COMP_CSR_POLARITY_Msk (0x1UL << COMP_CSR_POLARITY_Pos) /*!< 0x00008000 */ +#define COMP_CSR_POLARITY COMP_CSR_POLARITY_Msk /*!< Comparator output polarity */ +#define COMP_CSR_HYST_Pos (16U) +#define COMP_CSR_HYST_Msk (0x3UL << COMP_CSR_HYST_Pos) /*!< 0x00030000 */ +#define COMP_CSR_HYST COMP_CSR_HYST_Msk /*!< Comparator hysteresis */ +#define COMP_CSR_HYST_0 (0x1UL << COMP_CSR_HYST_Pos) /*!< 0x00010000 */ +#define COMP_CSR_HYST_1 (0x2UL << COMP_CSR_HYST_Pos) /*!< 0x00020000 */ +#define COMP_CSR_BLANKING_Pos (18U) +#define COMP_CSR_BLANKING_Msk (0x7UL << COMP_CSR_BLANKING_Pos) /*!< 0x001C0000 */ +#define COMP_CSR_BLANKING COMP_CSR_BLANKING_Msk /*!< Comparator blanking source */ +#define COMP_CSR_BLANKING_0 (0x1UL << COMP_CSR_BLANKING_Pos) /*!< 0x00040000 */ +#define COMP_CSR_BLANKING_1 (0x2UL << COMP_CSR_BLANKING_Pos) /*!< 0x00080000 */ +#define COMP_CSR_BLANKING_2 (0x4UL << COMP_CSR_BLANKING_Pos) /*!< 0x00100000 */ +#define COMP_CSR_BRGEN_Pos (22U) +#define COMP_CSR_BRGEN_Msk (0x1UL << COMP_CSR_BRGEN_Pos) /*!< 0x00400000 */ +#define COMP_CSR_BRGEN COMP_CSR_BRGEN_Msk /*!< Comparator voltage scaler enable */ +#define COMP_CSR_SCALEN_Pos (23U) +#define COMP_CSR_SCALEN_Msk (0x1UL << COMP_CSR_SCALEN_Pos) /*!< 0x00800000 */ +#define COMP_CSR_SCALEN COMP_CSR_SCALEN_Msk /*!< Comparator scaler bridge enable */ +#define COMP_CSR_INMESEL_Pos (25U) +#define COMP_CSR_INMESEL_Msk (0x3UL << COMP_CSR_INMESEL_Pos) /*!< 0x06000000 */ +#define COMP_CSR_INMESEL COMP_CSR_INMESEL_Msk /*!< Comparator input minus extended selection */ +#define COMP_CSR_INMESEL_0 (0x1UL << COMP_CSR_INMESEL_Pos) /*!< 0x02000000 */ +#define COMP_CSR_INMESEL_1 (0x2UL << COMP_CSR_INMESEL_Pos) /*!< 0x04000000 */ +#define COMP_CSR_VALUE_Pos (30U) +#define COMP_CSR_VALUE_Msk (0x1UL << COMP_CSR_VALUE_Pos) /*!< 0x40000000 */ +#define COMP_CSR_VALUE COMP_CSR_VALUE_Msk /*!< Comparator output level */ +#define COMP_CSR_LOCK_Pos (31U) +#define COMP_CSR_LOCK_Msk (0x1UL << COMP_CSR_LOCK_Pos) /*!< 0x80000000 */ +#define COMP_CSR_LOCK COMP_CSR_LOCK_Msk /*!< Comparator lock */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ +#define DMAMUX_CSR_SOF7_Pos (7U) +#define DMAMUX_CSR_SOF7_Msk (0x1UL << DMAMUX_CSR_SOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7_Msk /*!< Synchronization Overrun Flag 7 */ +#define DMAMUX_CSR_SOF8_Pos (8U) +#define DMAMUX_CSR_SOF8_Msk (0x1UL << DMAMUX_CSR_SOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8_Msk /*!< Synchronization Overrun Flag 8 */ +#define DMAMUX_CSR_SOF9_Pos (9U) +#define DMAMUX_CSR_SOF9_Msk (0x1UL << DMAMUX_CSR_SOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9_Msk /*!< Synchronization Overrun Flag 9 */ +#define DMAMUX_CSR_SOF10_Pos (10U) +#define DMAMUX_CSR_SOF10_Msk (0x1UL << DMAMUX_CSR_SOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10_Msk /*!< Synchronization Overrun Flag 10 */ +#define DMAMUX_CSR_SOF11_Pos (11U) +#define DMAMUX_CSR_SOF11_Msk (0x1UL << DMAMUX_CSR_SOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11_Msk /*!< Synchronization Overrun Flag 11 */ +#define DMAMUX_CSR_SOF12_Pos (12U) +#define DMAMUX_CSR_SOF12_Msk (0x1UL << DMAMUX_CSR_SOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12_Msk /*!< Synchronization Overrun Flag 12 */ +#define DMAMUX_CSR_SOF13_Pos (13U) +#define DMAMUX_CSR_SOF13_Msk (0x1UL << DMAMUX_CSR_SOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13_Msk /*!< Synchronization Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ +#define DMAMUX_CFR_CSOF7_Pos (7U) +#define DMAMUX_CFR_CSOF7_Msk (0x1UL << DMAMUX_CFR_CSOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7_Msk /*!< Clear Overrun Flag 7 */ +#define DMAMUX_CFR_CSOF8_Pos (8U) +#define DMAMUX_CFR_CSOF8_Msk (0x1UL << DMAMUX_CFR_CSOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8_Msk /*!< Clear Overrun Flag 8 */ +#define DMAMUX_CFR_CSOF9_Pos (9U) +#define DMAMUX_CFR_CSOF9_Msk (0x1UL << DMAMUX_CFR_CSOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9_Msk /*!< Clear Overrun Flag 9 */ +#define DMAMUX_CFR_CSOF10_Pos (10U) +#define DMAMUX_CFR_CSOF10_Msk (0x1UL << DMAMUX_CFR_CSOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10_Msk /*!< Clear Overrun Flag 10 */ +#define DMAMUX_CFR_CSOF11_Pos (11U) +#define DMAMUX_CFR_CSOF11_Msk (0x1UL << DMAMUX_CFR_CSOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11_Msk /*!< Clear Overrun Flag 11 */ +#define DMAMUX_CFR_CSOF12_Pos (12U) +#define DMAMUX_CFR_CSOF12_Msk (0x1UL << DMAMUX_CFR_CSOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12_Msk /*!< Clear Overrun Flag 12 */ +#define DMAMUX_CFR_CSOF13_Pos (13U) +#define DMAMUX_CFR_CSOF13_Msk (0x1UL << DMAMUX_CFR_CSOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13_Msk /*!< Clear Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT20_Pos (20U) +#define EXTI_RTSR1_RT20_Msk (0x1UL << EXTI_RTSR1_RT20_Pos) /*!< 0x00100000 */ +#define EXTI_RTSR1_RT20 EXTI_RTSR1_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR1_RT21_Pos (21U) +#define EXTI_RTSR1_RT21_Msk (0x1UL << EXTI_RTSR1_RT21_Pos) /*!< 0x00200000 */ +#define EXTI_RTSR1_RT21 EXTI_RTSR1_RT21_Msk /*!< Rising trigger event configuration bit of line 21 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ +#define EXTI_FTSR1_FT20_Pos (20U) +#define EXTI_FTSR1_FT20_Msk (0x1UL << EXTI_FTSR1_FT20_Pos) /*!< 0x00100000 */ +#define EXTI_FTSR1_FT20 EXTI_FTSR1_FT20_Msk /*!< Falling trigger event configuration bit of line 20 */ +#define EXTI_FTSR1_FT21_Pos (21U) +#define EXTI_FTSR1_FT21_Msk (0x1UL << EXTI_FTSR1_FT21_Pos) /*!< 0x00200000 */ +#define EXTI_FTSR1_FT21 EXTI_FTSR1_FT21_Msk /*!< Falling trigger event configuration bit of line 21 */ +#define EXTI_FTSR1_FT31_Pos (31U) +#define EXTI_FTSR1_FT31_Msk (0x1UL << EXTI_FTSR1_FT31_Pos) /*!< 0x80000000 */ +#define EXTI_FTSR1_FT31 EXTI_FTSR1_FT31_Msk /*!< Falling trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ +#define EXTI_SWIER1_SWI20_Pos (20U) +#define EXTI_SWIER1_SWI20_Msk (0x1UL << EXTI_SWIER1_SWI20_Pos) /*!< 0x00100000 */ +#define EXTI_SWIER1_SWI20 EXTI_SWIER1_SWI20_Msk /*!< Software Interrupt on line 20 */ +#define EXTI_SWIER1_SWI21_Pos (21U) +#define EXTI_SWIER1_SWI21_Msk (0x1UL << EXTI_SWIER1_SWI21_Pos) /*!< 0x00200000 */ +#define EXTI_SWIER1_SWI21 EXTI_SWIER1_SWI21_Msk /*!< Software Interrupt on line 21 */ +#define EXTI_SWIER1_SWI31_Pos (31U) +#define EXTI_SWIER1_SWI31_Msk (0x1UL << EXTI_SWIER1_SWI31_Pos) /*!< 0x80000000 */ +#define EXTI_SWIER1_SWI31 EXTI_SWIER1_SWI31_Msk /*!< Software Interrupt on line 31 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ +#define EXTI_PR1_PIF20_Pos (20U) +#define EXTI_PR1_PIF20_Msk (0x1UL << EXTI_PR1_PIF20_Pos) /*!< 0x00100000 */ +#define EXTI_PR1_PIF20 EXTI_PR1_PIF20_Msk /*!< Pending bit for line 20 */ +#define EXTI_PR1_PIF21_Pos (21U) +#define EXTI_PR1_PIF21_Msk (0x1UL << EXTI_PR1_PIF21_Pos) /*!< 0x00200000 */ +#define EXTI_PR1_PIF21 EXTI_PR1_PIF21_Msk /*!< Pending bit for line 21 */ +#define EXTI_PR1_PIF31_Pos (31U) +#define EXTI_PR1_PIF31_Msk (0x1UL << EXTI_PR1_PIF31_Pos) /*!< 0x80000000 */ +#define EXTI_PR1_PIF31 EXTI_PR1_PIF31_Msk /*!< Pending bit for line 31 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM20_Pos (20U) +#define EXTI_IMR1_IM20_Msk (0x1UL << EXTI_IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_IMR1_IM20 EXTI_IMR1_IM20_Msk /*!< CPU1 Interrupt Mask on line 20 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< CPU1 Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< CPU1 Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< CPU1 Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< CPU1 Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< CPU1 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ +#define EXTI_EMR1_EM20_Pos (20U) +#define EXTI_EMR1_EM20_Msk (0x1UL << EXTI_EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_EMR1_EM20 EXTI_EMR1_EM20_Msk /*!< CPU1 Event Mask on line 20 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< CPU1 Event Mask on line 21 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM46_Pos (14U) +#define EXTI_IMR2_IM46_Msk (0x1UL << EXTI_IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_IMR2_IM46 EXTI_IMR2_IM46_Msk /*!< CPU1 Interrupt Mask on line 46 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM20_Pos (20U) +#define EXTI_C2IMR1_IM20_Msk (0x1UL << EXTI_C2IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2IMR1_IM20 EXTI_C2IMR1_IM20_Msk /*!< CPU2 Interrupt Mask on line 20 */ +#define EXTI_C2IMR1_IM21_Pos (21U) +#define EXTI_C2IMR1_IM21_Msk (0x1UL << EXTI_C2IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_C2IMR1_IM21 EXTI_C2IMR1_IM21_Msk /*!< CPU2 Interrupt Mask on line 21 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM23_Pos (23U) +#define EXTI_C2IMR1_IM23_Msk (0x1UL << EXTI_C2IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_C2IMR1_IM23 EXTI_C2IMR1_IM23_Msk /*!< CPU2 Interrupt Mask on line 23 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM25_Pos (25U) +#define EXTI_C2IMR1_IM25_Msk (0x1UL << EXTI_C2IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_C2IMR1_IM25 EXTI_C2IMR1_IM25_Msk /*!< CPU2 Interrupt Mask on line 25 */ +#define EXTI_C2IMR1_IM28_Pos (28U) +#define EXTI_C2IMR1_IM28_Msk (0x1UL << EXTI_C2IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_C2IMR1_IM28 EXTI_C2IMR1_IM28_Msk /*!< CPU2 Interrupt Mask on line 28 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +#define EXTI_C2IMR1_IM31_Pos (31U) +#define EXTI_C2IMR1_IM31_Msk (0x1UL << EXTI_C2IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_C2IMR1_IM31 EXTI_C2IMR1_IM31_Msk /*!< CPU2 Interrupt Mask on line 31 */ +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ +#define EXTI_C2EMR1_EM20_Pos (20U) +#define EXTI_C2EMR1_EM20_Msk (0x1UL << EXTI_C2EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2EMR1_EM20 EXTI_C2EMR1_EM20_Msk /*!< CPU2 Event Mask on line 20 */ +#define EXTI_C2EMR1_EM21_Pos (21U) +#define EXTI_C2EMR1_EM21_Msk (0x1UL << EXTI_C2EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_C2EMR1_EM21 EXTI_C2EMR1_EM21_Msk /*!< CPU2 Event Mask on line 21 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM46_Pos (14U) +#define EXTI_C2IMR2_IM46_Msk (0x1UL << EXTI_C2IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR2_IM46 EXTI_C2IMR2_IM46_Msk /*!< CPU2 Interrupt Mask on line 46 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0x7FUL << FLASH_CR_PNB_Pos) /*!< 0x000003F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0xFFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0xFFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000000FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0x7FUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0x7FUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x007F0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0x7FUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x0000007F */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0x7FUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x007F0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0xFFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0xFFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000000FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0x7FUL << FLASH_SFR_SFSA_Pos) /*!< 0x0000007F */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (7U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x1FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0001FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* SCPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_Pos (18U) +#define FLASH_SRRVR_SBRSA_Msk (0x1FUL << FLASH_SRRVR_SBRSA_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA FLASH_SRRVR_SBRSA_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_Pos (23U) +#define FLASH_SRRVR_BRSD_Msk (0x1UL << FLASH_SRRVR_BRSD_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD FLASH_SRRVR_BRSD_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SNBRSA_Pos (25U) +#define FLASH_SRRVR_SNBRSA_Msk (0x1FUL << FLASH_SRRVR_SNBRSA_Pos) /*!< 0x3E000000 */ +#define FLASH_SRRVR_SNBRSA FLASH_SRRVR_SNBRSA_Msk /* Secure non-backup SRAM2b start address */ +#define FLASH_SRRVR_NBRSD_Pos (30U) +#define FLASH_SRRVR_NBRSD_Msk (0x1UL << FLASH_SRRVR_NBRSD_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_NBRSD FLASH_SRRVR_NBRSD_Msk /* Non-backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* SCPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0x7FUL << FLASH_C2CR_PNB_Pos) /*!< 0x000003F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!
© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb50xx + * @{ + */ + +#ifndef __STM32WB50xx_H +#define __STM32WB50xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb50xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 global Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Communication and TIM17 global Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of 802.15.4 (Zigbee) activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ +uint32_t RESERVED0[2]; /*!< Reserved, Address offset: 0x10-0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ +uint32_t RESERVED11; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 1 MB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 256 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF8000UL) /*!< Option Bytes : 4kB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 64 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00030000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00038000UL)/*!< SRAM2B(32 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00010000UL /*!< SRAM1 default size : 64 kB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 kB */ +#define SRAM2B_SIZE 0x00008000UL /*!< SRAM2b default size : 32 kB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x2000FFFFUL) /*!< SRAM1 : 64KB (0x20000000 - 0x2000FFFF) */ +#define SRAM2A_END_ADDR (0x20037FFFUL) /*!< SRAM2a (backup) : 32KB (0x20030000 - 0x20037FFF) */ +#define SRAM2B_END_ADDR (0x2003FFFFUL) /*!< SRAM2b (non-backup) : 32KB (0x20038000 - 0x2003FFFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x50000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x00000030UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003A0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00000100 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00000200 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00000400 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy defines */ +#define ADC_CCR_MULTI (ADC_CCR_DUAL) +#define ADC_CCR_MULTI_0 (ADC_CCR_DUAL_0) +#define ADC_CCR_MULTI_1 (ADC_CCR_DUAL_1) +#define ADC_CCR_MULTI_2 (ADC_CCR_DUAL_2) +#define ADC_CCR_MULTI_3 (ADC_CCR_DUAL_3) +#define ADC_CCR_MULTI_4 (ADC_CCR_DUAL_4) + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ +#define DMAMUX_CSR_SOF7_Pos (7U) +#define DMAMUX_CSR_SOF7_Msk (0x1UL << DMAMUX_CSR_SOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7_Msk /*!< Synchronization Overrun Flag 7 */ +#define DMAMUX_CSR_SOF8_Pos (8U) +#define DMAMUX_CSR_SOF8_Msk (0x1UL << DMAMUX_CSR_SOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8_Msk /*!< Synchronization Overrun Flag 8 */ +#define DMAMUX_CSR_SOF9_Pos (9U) +#define DMAMUX_CSR_SOF9_Msk (0x1UL << DMAMUX_CSR_SOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9_Msk /*!< Synchronization Overrun Flag 9 */ +#define DMAMUX_CSR_SOF10_Pos (10U) +#define DMAMUX_CSR_SOF10_Msk (0x1UL << DMAMUX_CSR_SOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10_Msk /*!< Synchronization Overrun Flag 10 */ +#define DMAMUX_CSR_SOF11_Pos (11U) +#define DMAMUX_CSR_SOF11_Msk (0x1UL << DMAMUX_CSR_SOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11_Msk /*!< Synchronization Overrun Flag 11 */ +#define DMAMUX_CSR_SOF12_Pos (12U) +#define DMAMUX_CSR_SOF12_Msk (0x1UL << DMAMUX_CSR_SOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12_Msk /*!< Synchronization Overrun Flag 12 */ +#define DMAMUX_CSR_SOF13_Pos (13U) +#define DMAMUX_CSR_SOF13_Msk (0x1UL << DMAMUX_CSR_SOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13_Msk /*!< Synchronization Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ +#define DMAMUX_CFR_CSOF7_Pos (7U) +#define DMAMUX_CFR_CSOF7_Msk (0x1UL << DMAMUX_CFR_CSOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7_Msk /*!< Clear Overrun Flag 7 */ +#define DMAMUX_CFR_CSOF8_Pos (8U) +#define DMAMUX_CFR_CSOF8_Msk (0x1UL << DMAMUX_CFR_CSOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8_Msk /*!< Clear Overrun Flag 8 */ +#define DMAMUX_CFR_CSOF9_Pos (9U) +#define DMAMUX_CFR_CSOF9_Msk (0x1UL << DMAMUX_CFR_CSOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9_Msk /*!< Clear Overrun Flag 9 */ +#define DMAMUX_CFR_CSOF10_Pos (10U) +#define DMAMUX_CFR_CSOF10_Msk (0x1UL << DMAMUX_CFR_CSOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10_Msk /*!< Clear Overrun Flag 10 */ +#define DMAMUX_CFR_CSOF11_Pos (11U) +#define DMAMUX_CFR_CSOF11_Msk (0x1UL << DMAMUX_CFR_CSOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11_Msk /*!< Clear Overrun Flag 11 */ +#define DMAMUX_CFR_CSOF12_Pos (12U) +#define DMAMUX_CFR_CSOF12_Msk (0x1UL << DMAMUX_CFR_CSOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12_Msk /*!< Clear Overrun Flag 12 */ +#define DMAMUX_CFR_CSOF13_Pos (13U) +#define DMAMUX_CFR_CSOF13_Msk (0x1UL << DMAMUX_CFR_CSOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13_Msk /*!< Clear Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT20_Pos (20U) +#define EXTI_RTSR1_RT20_Msk (0x1UL << EXTI_RTSR1_RT20_Pos) /*!< 0x00100000 */ +#define EXTI_RTSR1_RT20 EXTI_RTSR1_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR1_RT21_Pos (21U) +#define EXTI_RTSR1_RT21_Msk (0x1UL << EXTI_RTSR1_RT21_Pos) /*!< 0x00200000 */ +#define EXTI_RTSR1_RT21 EXTI_RTSR1_RT21_Msk /*!< Rising trigger event configuration bit of line 21 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM46_Pos (14U) +#define EXTI_IMR2_IM46_Msk (0x1UL << EXTI_IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_IMR2_IM46 EXTI_IMR2_IM46_Msk /*!< CPU1 Interrupt Mask on line 46 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM46_Pos (14U) +#define EXTI_C2IMR2_IM46_Msk (0x1UL << EXTI_C2IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR2_IM46 EXTI_C2IMR2_IM46_Msk /*!< CPU2 Interrupt Mask on line 46 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFFUL << FLASH_CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x1FFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x1FFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x1FFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x1FFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0xFFUL << FLASH_SFR_SFSA_Pos) /*!< 0x000000FF */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (8U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x3FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0003FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* SCPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_Pos (18U) +#define FLASH_SRRVR_SBRSA_Msk (0x1FUL << FLASH_SRRVR_SBRSA_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA FLASH_SRRVR_SBRSA_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_Pos (23U) +#define FLASH_SRRVR_BRSD_Msk (0x1UL << FLASH_SRRVR_BRSD_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD FLASH_SRRVR_BRSD_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SNBRSA_Pos (25U) +#define FLASH_SRRVR_SNBRSA_Msk (0x1FUL << FLASH_SRRVR_SNBRSA_Pos) /*!< 0x3E000000 */ +#define FLASH_SRRVR_SNBRSA FLASH_SRRVR_SNBRSA_Msk /* Secure non-backup SRAM2b start address */ +#define FLASH_SRRVR_NBRSD_Pos (30U) +#define FLASH_SRRVR_NBRSD_Msk (0x1UL << FLASH_SRRVR_NBRSD_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_NBRSD FLASH_SRRVR_NBRSD_Msk /* Non-backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* SCPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0xFFUL << FLASH_C2CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!
© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.
+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb5mxx + * @{ + */ + +#ifndef __STM32WB5Mxx_H +#define __STM32WB5Mxx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb5mxx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ + USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt (including USB wakeup) */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + COMP_IRQn = 22, /*!< COMP1 and COMP2 Interrupts */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 global Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Communication and TIM17 global Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + I2C3_EV_IRQn = 32, /*!< I2C3 Event Interrupt */ + I2C3_ER_IRQn = 33, /*!< I2C3 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + SPI2_IRQn = 35, /*!< SPI2 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + LPUART1_IRQn = 37, /*!< LPUART1 Interrupt */ + SAI1_IRQn = 38, /*!< SAI1 A and B global interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + CRS_IRQn = 42, /*!< CRS interrupt */ + PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of 802.15.4 (Zigbee) activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + LCD_IRQn = 49, /*!< LCD Interrupt */ + QUADSPI_IRQn = 50, /*!< QUADSPI Interrupt */ + AES1_IRQn = 51, /*!< AES1 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMA2_Channel1_IRQn = 55, /*!< DMA2 Channel 1 Interrupt */ + DMA2_Channel2_IRQn = 56, /*!< DMA2 Channel 2 Interrupt */ + DMA2_Channel3_IRQn = 57, /*!< DMA2 Channel 3 Interrupt */ + DMA2_Channel4_IRQn = 58, /*!< DMA2 Channel 4 Interrupt */ + DMA2_Channel5_IRQn = 59, /*!< DMA2 Channel 5 Interrupt */ + DMA2_Channel6_IRQn = 60, /*!< DMA2 Channel 6 Interrupt */ + DMA2_Channel7_IRQn = 61, /*!< DMA2 Channel 7 Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< PWR Pull-Up Control Register of port D, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< PWR Pull-Down Control Register of port D, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ + __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 configuration Register, Address offset: 0x10 */ +uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t SMPSCR; /*!< RCC SMPS step-down converter control register, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief VREFBUF + */ +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Touch Sensing Controller (TSC) + */ +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */ +} TSC_TypeDef; + +/** + * @brief LCD + */ +typedef struct +{ + __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ + __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ + __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ +} LCD_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ + __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint16_t RESERVEDD; /*!< Reserved */ + __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ + __IO uint16_t RESERVEDE; /*!< Reserved */ +} USB_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ + __IO uint32_t CR; /*!< CRS control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Serial Audio Interface + */ +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED[16]; /*!< Reserved, Address offset: 0x04 to 0x40 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 1 MB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 256 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF8000UL) /*!< Option Bytes : 4kB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 192 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00030000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00038000UL)/*!< SRAM2B(32 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00030000UL /*!< SRAM1 default size : 192 kB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 kB */ +#define SRAM2B_SIZE 0x00008000UL /*!< SRAM2b default size : 32 kB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x2002FFFFUL) /*!< SRAM1 : 192KB (0x20000000 - 0x2002FFFF) */ +#define SRAM2A_END_ADDR (0x20037FFFUL) /*!< SRAM2a (backup) : 32KB (0x20030000 - 0x20037FFF) */ +#define SRAM2B_END_ADDR (0x2003FFFFUL) /*!< SRAM2b (non-backup) : 32KB (0x20038000 - 0x2003FFFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 - 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 - 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 - 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 - 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) +#define AHB3PERIPH_BASE (PERIPH_BASE + 0x50000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define LCD_BASE (APB1PERIPH_BASE + 0x00002400UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x00005C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x00006000UL) +#define USB1_BASE (APB1PERIPH_BASE + 0x00006800UL) +#define USB1_PMAADDR (APB1PERIPH_BASE + 0x00006C00UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x00000030UL) +#define COMP1_BASE (APB2PERIPH_BASE + 0x00000200UL) +#define COMP2_BASE (APB2PERIPH_BASE + 0x00000204UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400UL) +#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x00005400UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0000004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0000024UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x00000400UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008UL) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001CUL) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030UL) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044UL) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058UL) +#define DMA2_Channel6_BASE (DMA2_BASE + 0x0000006CUL) +#define DMA2_Channel7_BASE (DMA2_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) +#define DMAMUX1_Channel7_BASE (DMAMUX1_BASE + 0x0000001CUL) +#define DMAMUX1_Channel8_BASE (DMAMUX1_BASE + 0x00000020UL) +#define DMAMUX1_Channel9_BASE (DMAMUX1_BASE + 0x00000024UL) +#define DMAMUX1_Channel10_BASE (DMAMUX1_BASE + 0x00000028UL) +#define DMAMUX1_Channel11_BASE (DMAMUX1_BASE + 0x0000002CUL) +#define DMAMUX1_Channel12_BASE (DMAMUX1_BASE + 0x00000030UL) +#define DMAMUX1_Channel13_BASE (DMAMUX1_BASE + 0x00000034UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOD_BASE (IOPORT_BASE + 0x00000C00UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + +#define AES1_BASE (AHB2PERIPH_BASE + 0x08060000UL) + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ +#define QUADSPI_BASE (AHB3PERIPH_BASE + 0x00000000UL) /*!< QUADSPI memories accessible over AHB base address */ +#define QUADSPI_R_BASE (AHB3PERIPH_BASE + 0x10001000UL) /*!< QUADSPI control registers base address */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define LCD ((LCD_TypeDef *) LCD_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define USB ((USB_TypeDef *) USB1_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) +#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) +#define DMAMUX1_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel7_BASE) +#define DMAMUX1_Channel8 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel8_BASE) +#define DMAMUX1_Channel9 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel9_BASE) +#define DMAMUX1_Channel10 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel10_BASE) +#define DMAMUX1_Channel11 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel11_BASE) +#define DMAMUX1_Channel12 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel12_BASE) +#define DMAMUX1_Channel13 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel13_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + +#define AES1 ((AES_TypeDef *) AES1_BASE) + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ +#define QUADSPI ((QUADSPI_TypeDef *) QUADSPI_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ + +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ + +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< ADC multimode mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< ADC multimode delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_DMACFG_Pos (13U) +#define ADC_CCR_DMACFG_Msk (0x1UL << ADC_CCR_DMACFG_Pos) /*!< 0x00002000 */ +#define ADC_CCR_DMACFG ADC_CCR_DMACFG_Msk /*!< ADC multimode DMA transfer configuration */ + +#define ADC_CCR_MDMA_Pos (14U) +#define ADC_CCR_MDMA_Msk (0x3UL << ADC_CCR_MDMA_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_MDMA ADC_CCR_MDMA_Msk /*!< ADC multimode DMA transfer enable */ +#define ADC_CCR_MDMA_0 (0x1UL << ADC_CCR_MDMA_Pos) /*!< 0x00004000 */ +#define ADC_CCR_MDMA_1 (0x2UL << ADC_CCR_MDMA_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003A0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00000100 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00000200 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00000400 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00000800 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/* Legacy defines */ +#define ADC_CCR_MULTI (ADC_CCR_DUAL) +#define ADC_CCR_MULTI_0 (ADC_CCR_DUAL_0) +#define ADC_CCR_MULTI_1 (ADC_CCR_DUAL_1) +#define ADC_CCR_MULTI_2 (ADC_CCR_DUAL_2) +#define ADC_CCR_MULTI_3 (ADC_CCR_DUAL_3) +#define ADC_CCR_MULTI_4 (ADC_CCR_DUAL_4) + +/******************************************************************************/ +/* */ +/* Analog Comparators (COMP) */ +/* */ +/******************************************************************************/ +/********************** Bit definition for COMP_CSR register ***************/ +#define COMP_CSR_EN_Pos (0U) +#define COMP_CSR_EN_Msk (0x1UL << COMP_CSR_EN_Pos) /*!< 0x00000001 */ +#define COMP_CSR_EN COMP_CSR_EN_Msk /*!< Comparator enable */ +#define COMP_CSR_PWRMODE_Pos (2U) +#define COMP_CSR_PWRMODE_Msk (0x3UL << COMP_CSR_PWRMODE_Pos) /*!< 0x0000000C */ +#define COMP_CSR_PWRMODE COMP_CSR_PWRMODE_Msk /*!< Comparator power mode */ +#define COMP_CSR_PWRMODE_0 (0x1UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000004 */ +#define COMP_CSR_PWRMODE_1 (0x2UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000008 */ +#define COMP_CSR_INMSEL_Pos (4U) +#define COMP_CSR_INMSEL_Msk (0x7UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000070 */ +#define COMP_CSR_INMSEL COMP_CSR_INMSEL_Msk /*!< Comparator input minus selection */ +#define COMP_CSR_INMSEL_0 (0x1UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000010 */ +#define COMP_CSR_INMSEL_1 (0x2UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000020 */ +#define COMP_CSR_INMSEL_2 (0x4UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000040 */ +#define COMP_CSR_INPSEL_Pos (7U) +#define COMP_CSR_INPSEL_Msk (0x3UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000180 */ +#define COMP_CSR_INPSEL COMP_CSR_INPSEL_Msk /*!< Comparator input plus selection */ +#define COMP_CSR_INPSEL_0 (0x1UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000080 */ +#define COMP_CSR_INPSEL_1 (0x2UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000100 */ +#define COMP_CSR_WINMODE_Pos (9U) +#define COMP_CSR_WINMODE_Msk (0x1UL << COMP_CSR_WINMODE_Pos) /*!< 0x00000200 */ +#define COMP_CSR_WINMODE COMP_CSR_WINMODE_Msk /*!< Pair of comparators window mode. Bit intended to be used with COMP common instance (COMP_Common_TypeDef) */ +#define COMP_CSR_POLARITY_Pos (15U) +#define COMP_CSR_POLARITY_Msk (0x1UL << COMP_CSR_POLARITY_Pos) /*!< 0x00008000 */ +#define COMP_CSR_POLARITY COMP_CSR_POLARITY_Msk /*!< Comparator output polarity */ +#define COMP_CSR_HYST_Pos (16U) +#define COMP_CSR_HYST_Msk (0x3UL << COMP_CSR_HYST_Pos) /*!< 0x00030000 */ +#define COMP_CSR_HYST COMP_CSR_HYST_Msk /*!< Comparator hysteresis */ +#define COMP_CSR_HYST_0 (0x1UL << COMP_CSR_HYST_Pos) /*!< 0x00010000 */ +#define COMP_CSR_HYST_1 (0x2UL << COMP_CSR_HYST_Pos) /*!< 0x00020000 */ +#define COMP_CSR_BLANKING_Pos (18U) +#define COMP_CSR_BLANKING_Msk (0x7UL << COMP_CSR_BLANKING_Pos) /*!< 0x001C0000 */ +#define COMP_CSR_BLANKING COMP_CSR_BLANKING_Msk /*!< Comparator blanking source */ +#define COMP_CSR_BLANKING_0 (0x1UL << COMP_CSR_BLANKING_Pos) /*!< 0x00040000 */ +#define COMP_CSR_BLANKING_1 (0x2UL << COMP_CSR_BLANKING_Pos) /*!< 0x00080000 */ +#define COMP_CSR_BLANKING_2 (0x4UL << COMP_CSR_BLANKING_Pos) /*!< 0x00100000 */ +#define COMP_CSR_BRGEN_Pos (22U) +#define COMP_CSR_BRGEN_Msk (0x1UL << COMP_CSR_BRGEN_Pos) /*!< 0x00400000 */ +#define COMP_CSR_BRGEN COMP_CSR_BRGEN_Msk /*!< Comparator voltage scaler enable */ +#define COMP_CSR_SCALEN_Pos (23U) +#define COMP_CSR_SCALEN_Msk (0x1UL << COMP_CSR_SCALEN_Pos) /*!< 0x00800000 */ +#define COMP_CSR_SCALEN COMP_CSR_SCALEN_Msk /*!< Comparator scaler bridge enable */ +#define COMP_CSR_INMESEL_Pos (25U) +#define COMP_CSR_INMESEL_Msk (0x3UL << COMP_CSR_INMESEL_Pos) /*!< 0x06000000 */ +#define COMP_CSR_INMESEL COMP_CSR_INMESEL_Msk /*!< Comparator input minus extended selection */ +#define COMP_CSR_INMESEL_0 (0x1UL << COMP_CSR_INMESEL_Pos) /*!< 0x02000000 */ +#define COMP_CSR_INMESEL_1 (0x2UL << COMP_CSR_INMESEL_Pos) /*!< 0x04000000 */ +#define COMP_CSR_VALUE_Pos (30U) +#define COMP_CSR_VALUE_Msk (0x1UL << COMP_CSR_VALUE_Pos) /*!< 0x40000000 */ +#define COMP_CSR_VALUE COMP_CSR_VALUE_Msk /*!< Comparator output level */ +#define COMP_CSR_LOCK_Pos (31U) +#define COMP_CSR_LOCK_Msk (0x1UL << COMP_CSR_LOCK_Pos) /*!< 0x80000000 */ +#define COMP_CSR_LOCK COMP_CSR_LOCK_Msk /*!< Comparator lock */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0xFFUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x000000FF */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_DMAREQ_ID_6 (0x40U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000040 */ +#define DMAMUX_CxCR_DMAREQ_ID_7 (0x80U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000080 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ +#define DMAMUX_CSR_SOF7_Pos (7U) +#define DMAMUX_CSR_SOF7_Msk (0x1UL << DMAMUX_CSR_SOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7_Msk /*!< Synchronization Overrun Flag 7 */ +#define DMAMUX_CSR_SOF8_Pos (8U) +#define DMAMUX_CSR_SOF8_Msk (0x1UL << DMAMUX_CSR_SOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8_Msk /*!< Synchronization Overrun Flag 8 */ +#define DMAMUX_CSR_SOF9_Pos (9U) +#define DMAMUX_CSR_SOF9_Msk (0x1UL << DMAMUX_CSR_SOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9_Msk /*!< Synchronization Overrun Flag 9 */ +#define DMAMUX_CSR_SOF10_Pos (10U) +#define DMAMUX_CSR_SOF10_Msk (0x1UL << DMAMUX_CSR_SOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10_Msk /*!< Synchronization Overrun Flag 10 */ +#define DMAMUX_CSR_SOF11_Pos (11U) +#define DMAMUX_CSR_SOF11_Msk (0x1UL << DMAMUX_CSR_SOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11_Msk /*!< Synchronization Overrun Flag 11 */ +#define DMAMUX_CSR_SOF12_Pos (12U) +#define DMAMUX_CSR_SOF12_Msk (0x1UL << DMAMUX_CSR_SOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12_Msk /*!< Synchronization Overrun Flag 12 */ +#define DMAMUX_CSR_SOF13_Pos (13U) +#define DMAMUX_CSR_SOF13_Msk (0x1UL << DMAMUX_CSR_SOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13_Msk /*!< Synchronization Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ +#define DMAMUX_CFR_CSOF7_Pos (7U) +#define DMAMUX_CFR_CSOF7_Msk (0x1UL << DMAMUX_CFR_CSOF7_Pos) /*!< 0x00000080 */ +#define DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7_Msk /*!< Clear Overrun Flag 7 */ +#define DMAMUX_CFR_CSOF8_Pos (8U) +#define DMAMUX_CFR_CSOF8_Msk (0x1UL << DMAMUX_CFR_CSOF8_Pos) /*!< 0x00000100 */ +#define DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8_Msk /*!< Clear Overrun Flag 8 */ +#define DMAMUX_CFR_CSOF9_Pos (9U) +#define DMAMUX_CFR_CSOF9_Msk (0x1UL << DMAMUX_CFR_CSOF9_Pos) /*!< 0x00000200 */ +#define DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9_Msk /*!< Clear Overrun Flag 9 */ +#define DMAMUX_CFR_CSOF10_Pos (10U) +#define DMAMUX_CFR_CSOF10_Msk (0x1UL << DMAMUX_CFR_CSOF10_Pos) /*!< 0x00000400 */ +#define DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10_Msk /*!< Clear Overrun Flag 10 */ +#define DMAMUX_CFR_CSOF11_Pos (11U) +#define DMAMUX_CFR_CSOF11_Msk (0x1UL << DMAMUX_CFR_CSOF11_Pos) /*!< 0x00000800 */ +#define DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11_Msk /*!< Clear Overrun Flag 11 */ +#define DMAMUX_CFR_CSOF12_Pos (12U) +#define DMAMUX_CFR_CSOF12_Msk (0x1UL << DMAMUX_CFR_CSOF12_Pos) /*!< 0x00001000 */ +#define DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12_Msk /*!< Clear Overrun Flag 12 */ +#define DMAMUX_CFR_CSOF13_Pos (13U) +#define DMAMUX_CFR_CSOF13_Msk (0x1UL << DMAMUX_CFR_CSOF13_Pos) /*!< 0x00002000 */ +#define DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13_Msk /*!< Clear Overrun Flag 13 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT20_Pos (20U) +#define EXTI_RTSR1_RT20_Msk (0x1UL << EXTI_RTSR1_RT20_Pos) /*!< 0x00100000 */ +#define EXTI_RTSR1_RT20 EXTI_RTSR1_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR1_RT21_Pos (21U) +#define EXTI_RTSR1_RT21_Msk (0x1UL << EXTI_RTSR1_RT21_Pos) /*!< 0x00200000 */ +#define EXTI_RTSR1_RT21 EXTI_RTSR1_RT21_Msk /*!< Rising trigger event configuration bit of line 21 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ +#define EXTI_FTSR1_FT20_Pos (20U) +#define EXTI_FTSR1_FT20_Msk (0x1UL << EXTI_FTSR1_FT20_Pos) /*!< 0x00100000 */ +#define EXTI_FTSR1_FT20 EXTI_FTSR1_FT20_Msk /*!< Falling trigger event configuration bit of line 20 */ +#define EXTI_FTSR1_FT21_Pos (21U) +#define EXTI_FTSR1_FT21_Msk (0x1UL << EXTI_FTSR1_FT21_Pos) /*!< 0x00200000 */ +#define EXTI_FTSR1_FT21 EXTI_FTSR1_FT21_Msk /*!< Falling trigger event configuration bit of line 21 */ +#define EXTI_FTSR1_FT31_Pos (31U) +#define EXTI_FTSR1_FT31_Msk (0x1UL << EXTI_FTSR1_FT31_Pos) /*!< 0x80000000 */ +#define EXTI_FTSR1_FT31 EXTI_FTSR1_FT31_Msk /*!< Falling trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ +#define EXTI_SWIER1_SWI20_Pos (20U) +#define EXTI_SWIER1_SWI20_Msk (0x1UL << EXTI_SWIER1_SWI20_Pos) /*!< 0x00100000 */ +#define EXTI_SWIER1_SWI20 EXTI_SWIER1_SWI20_Msk /*!< Software Interrupt on line 20 */ +#define EXTI_SWIER1_SWI21_Pos (21U) +#define EXTI_SWIER1_SWI21_Msk (0x1UL << EXTI_SWIER1_SWI21_Pos) /*!< 0x00200000 */ +#define EXTI_SWIER1_SWI21 EXTI_SWIER1_SWI21_Msk /*!< Software Interrupt on line 21 */ +#define EXTI_SWIER1_SWI31_Pos (31U) +#define EXTI_SWIER1_SWI31_Msk (0x1UL << EXTI_SWIER1_SWI31_Pos) /*!< 0x80000000 */ +#define EXTI_SWIER1_SWI31 EXTI_SWIER1_SWI31_Msk /*!< Software Interrupt on line 31 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ +#define EXTI_PR1_PIF20_Pos (20U) +#define EXTI_PR1_PIF20_Msk (0x1UL << EXTI_PR1_PIF20_Pos) /*!< 0x00100000 */ +#define EXTI_PR1_PIF20 EXTI_PR1_PIF20_Msk /*!< Pending bit for line 20 */ +#define EXTI_PR1_PIF21_Pos (21U) +#define EXTI_PR1_PIF21_Msk (0x1UL << EXTI_PR1_PIF21_Pos) /*!< 0x00200000 */ +#define EXTI_PR1_PIF21 EXTI_PR1_PIF21_Msk /*!< Pending bit for line 21 */ +#define EXTI_PR1_PIF31_Pos (31U) +#define EXTI_PR1_PIF31_Msk (0x1UL << EXTI_PR1_PIF31_Pos) /*!< 0x80000000 */ +#define EXTI_PR1_PIF31 EXTI_PR1_PIF31_Msk /*!< Pending bit for line 31 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM20_Pos (20U) +#define EXTI_IMR1_IM20_Msk (0x1UL << EXTI_IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_IMR1_IM20 EXTI_IMR1_IM20_Msk /*!< CPU1 Interrupt Mask on line 20 */ +#define EXTI_IMR1_IM21_Pos (21U) +#define EXTI_IMR1_IM21_Msk (0x1UL << EXTI_IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_IMR1_IM21 EXTI_IMR1_IM21_Msk /*!< CPU1 Interrupt Mask on line 21 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM23_Pos (23U) +#define EXTI_IMR1_IM23_Msk (0x1UL << EXTI_IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_IMR1_IM23 EXTI_IMR1_IM23_Msk /*!< CPU1 Interrupt Mask on line 23 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< CPU1 Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM28_Pos (28U) +#define EXTI_IMR1_IM28_Msk (0x1UL << EXTI_IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_IMR1_IM28 EXTI_IMR1_IM28_Msk /*!< CPU1 Interrupt Mask on line 28 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< CPU1 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ +#define EXTI_EMR1_EM20_Pos (20U) +#define EXTI_EMR1_EM20_Msk (0x1UL << EXTI_EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_EMR1_EM20 EXTI_EMR1_EM20_Msk /*!< CPU1 Event Mask on line 20 */ +#define EXTI_EMR1_EM21_Pos (21U) +#define EXTI_EMR1_EM21_Msk (0x1UL << EXTI_EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_EMR1_EM21 EXTI_EMR1_EM21_Msk /*!< CPU1 Event Mask on line 21 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM43_Pos (11U) +#define EXTI_IMR2_IM43_Msk (0x1UL << EXTI_IMR2_IM43_Pos) /*!< 0x00000800 */ +#define EXTI_IMR2_IM43 EXTI_IMR2_IM43_Msk /*!< CPU1 Interrupt Mask on line 43 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM46_Pos (14U) +#define EXTI_IMR2_IM46_Msk (0x1UL << EXTI_IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_IMR2_IM46 EXTI_IMR2_IM46_Msk /*!< CPU1 Interrupt Mask on line 46 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM20_Pos (20U) +#define EXTI_C2IMR1_IM20_Msk (0x1UL << EXTI_C2IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2IMR1_IM20 EXTI_C2IMR1_IM20_Msk /*!< CPU2 Interrupt Mask on line 20 */ +#define EXTI_C2IMR1_IM21_Pos (21U) +#define EXTI_C2IMR1_IM21_Msk (0x1UL << EXTI_C2IMR1_IM21_Pos) /*!< 0x00200000 */ +#define EXTI_C2IMR1_IM21 EXTI_C2IMR1_IM21_Msk /*!< CPU2 Interrupt Mask on line 21 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM23_Pos (23U) +#define EXTI_C2IMR1_IM23_Msk (0x1UL << EXTI_C2IMR1_IM23_Pos) /*!< 0x00800000 */ +#define EXTI_C2IMR1_IM23 EXTI_C2IMR1_IM23_Msk /*!< CPU2 Interrupt Mask on line 23 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM25_Pos (25U) +#define EXTI_C2IMR1_IM25_Msk (0x1UL << EXTI_C2IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_C2IMR1_IM25 EXTI_C2IMR1_IM25_Msk /*!< CPU2 Interrupt Mask on line 25 */ +#define EXTI_C2IMR1_IM28_Pos (28U) +#define EXTI_C2IMR1_IM28_Msk (0x1UL << EXTI_C2IMR1_IM28_Pos) /*!< 0x10000000 */ +#define EXTI_C2IMR1_IM28 EXTI_C2IMR1_IM28_Msk /*!< CPU2 Interrupt Mask on line 28 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +#define EXTI_C2IMR1_IM31_Pos (31U) +#define EXTI_C2IMR1_IM31_Msk (0x1UL << EXTI_C2IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_C2IMR1_IM31 EXTI_C2IMR1_IM31_Msk /*!< CPU2 Interrupt Mask on line 31 */ +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ +#define EXTI_C2EMR1_EM20_Pos (20U) +#define EXTI_C2EMR1_EM20_Msk (0x1UL << EXTI_C2EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2EMR1_EM20 EXTI_C2EMR1_EM20_Msk /*!< CPU2 Event Mask on line 20 */ +#define EXTI_C2EMR1_EM21_Pos (21U) +#define EXTI_C2EMR1_EM21_Msk (0x1UL << EXTI_C2EMR1_EM21_Pos) /*!< 0x00200000 */ +#define EXTI_C2EMR1_EM21 EXTI_C2EMR1_EM21_Msk /*!< CPU2 Event Mask on line 21 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM43_Pos (11U) +#define EXTI_C2IMR2_IM43_Msk (0x1UL << EXTI_C2IMR2_IM43_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR2_IM43 EXTI_C2IMR2_IM43_Msk /*!< CPU2 Interrupt Mask on line 43 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM46_Pos (14U) +#define EXTI_C2IMR2_IM46_Msk (0x1UL << EXTI_C2IMR2_IM46_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR2_IM46 EXTI_C2IMR2_IM46_Msk /*!< CPU2 Interrupt Mask on line 46 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFFUL << FLASH_CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x1FFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x1FFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x1FFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x1FFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0xFFUL << FLASH_SFR_SFSA_Pos) /*!< 0x000000FF */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (8U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x3FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0003FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* SCPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_Pos (18U) +#define FLASH_SRRVR_SBRSA_Msk (0x1FUL << FLASH_SRRVR_SBRSA_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA FLASH_SRRVR_SBRSA_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_Pos (23U) +#define FLASH_SRRVR_BRSD_Msk (0x1UL << FLASH_SRRVR_BRSD_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD FLASH_SRRVR_BRSD_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SNBRSA_Pos (25U) +#define FLASH_SRRVR_SNBRSA_Msk (0x1FUL << FLASH_SRRVR_SNBRSA_Pos) /*!< 0x3E000000 */ +#define FLASH_SRRVR_SNBRSA FLASH_SRRVR_SNBRSA_Msk /* Secure non-backup SRAM2b start address */ +#define FLASH_SRRVR_NBRSD_Pos (30U) +#define FLASH_SRRVR_NBRSD_Msk (0x1UL << FLASH_SRRVR_NBRSD_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_NBRSD FLASH_SRRVR_NBRSD_Msk /* Non-backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* SCPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0xFFUL << FLASH_C2CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +C2SEV_PWR_C2H_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s new file mode 100644 index 0000000..dcfc93a --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s @@ -0,0 +1,364 @@ +;****************************************************************************** +;* File Name : startup_stm32wb35xx_cm4.s +;* Author : MCD Application Team +;* Description : STM32WB35xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD USB_HP_IRQHandler ; USB High Priority Interrupt + DCD USB_LP_IRQHandler ; USB Low Priority Interrupt + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 and COMP2 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD I2C3_EV_IRQHandler ; I2C3 Event Interrupt + DCD I2C3_ER_IRQHandler ; I2C3 Error Interrupt + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD SPI2_IRQHandler ; SPI2 Interrupt + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD CRS_IRQHandler ; CRS interrupt + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD QUADSPI_IRQHandler ; QUADSPI Interrupt + DCD AES1_IRQHandler ; AES1 Interrupt + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 Interrupt + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 Interrupt + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 Interrupt + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 Interrupt + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 Interrupt + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 Interrupt + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 Interrupt + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT CRS_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT AES1_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT DMA2_Channel6_IRQHandler [WEAK] + EXPORT DMA2_Channel7_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +C2SEV_PWR_C2H_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +LPUART1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +CRS_IRQHandler +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +QUADSPI_IRQHandler +AES1_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +DMA2_Channel6_IRQHandler +DMA2_Channel7_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s new file mode 100644 index 0000000..1faed69 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s @@ -0,0 +1,330 @@ +;****************************************************************************** +;* File Name : startup_stm32wb50xx_cm4.s +;* Author : MCD Application Team +;* Description : STM32WB50xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +C2SEV_PWR_C2H_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s new file mode 100644 index 0000000..5039ac1 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s @@ -0,0 +1,368 @@ +;****************************************************************************** +;* File Name : startup_stm32wb5mxx_cm4.s +;* Author : MCD Application Team +;* Description : STM32WB5Mxx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD USB_HP_IRQHandler ; USB High Priority Interrupt + DCD USB_LP_IRQHandler ; USB Low Priority Interrupt + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 and COMP2 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD I2C3_EV_IRQHandler ; I2C3 Event Interrupt + DCD I2C3_ER_IRQHandler ; I2C3 Error Interrupt + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD SPI2_IRQHandler ; SPI2 Interrupt + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD SAI1_IRQHandler ; SAI Interrupt + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD CRS_IRQHandler ; CRS interrupt + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD LCD_IRQHandler ; LCD Interrupt + DCD QUADSPI_IRQHandler ; QUADSPI Interrupt + DCD AES1_IRQHandler ; AES1 Interrupt + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 Interrupt + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 Interrupt + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 Interrupt + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 Interrupt + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 Interrupt + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 Interrupt + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 Interrupt + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT CRS_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT AES1_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT DMA2_Channel6_IRQHandler [WEAK] + EXPORT DMA2_Channel7_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +C2SEV_PWR_C2H_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +LPUART1_IRQHandler +SAI1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +CRS_IRQHandler +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +LCD_IRQHandler +QUADSPI_IRQHandler +AES1_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +DMA2_Channel6_IRQHandler +DMA2_Channel7_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s new file mode 100644 index 0000000..cdc7a3f --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file startup_stm32wb30xx_cm4.s + * @author MCD Application Team + * @brief STM32WB30xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word 0 + .word 0 + .word C2SEV_PWR_C2H_IRQHandler + .word 0 + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word 0 + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word 0 + .word 0 + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word 0 + .word PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word 0 + .word 0 + .word 0 + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s new file mode 100644 index 0000000..fe2bb01 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s @@ -0,0 +1,439 @@ +/** + ****************************************************************************** + * @file startup_stm32wb35xx_cm4.s + * @author MCD Application Team + * @brief STM32WB35xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word C2SEV_PWR_C2H_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C3_EV_IRQHandler + .word I2C3_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word LPUART1_IRQHandler + .word 0 + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word CRS_IRQHandler + .word PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word 0 + .word QUADSPI_IRQHandler + .word AES1_IRQHandler + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word DMA2_Channel6_IRQHandler + .word DMA2_Channel7_IRQHandler + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak AES1_IRQHandler + .thumb_set AES1_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s new file mode 100644 index 0000000..4693070 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file startup_stm32wb50xx_cm4.s + * @author MCD Application Team + * @brief STM32WB50xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word 0 + .word 0 + .word C2SEV_PWR_C2H_IRQHandler + .word 0 + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word 0 + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word LPUART1_IRQHandler + .word 0 + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word 0 + .word PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word 0 + .word 0 + .word 0 + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s index efedc62..7a612ef 100644 --- a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s +++ b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s @@ -44,21 +44,29 @@ defined in linker script */ .word _sbss /* end address for the .bss section. defined in linker script */ .word _ebss - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - ldr r0, =_estack - mov sp, r0 /* set stack pointer */ - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end movs r3, #0 - b LoopCopyDataInit + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm +.section .text.data_initializers CopyDataInit: ldr r4, [r2, r3] str r4, [r0, r3] @@ -67,21 +75,31 @@ CopyDataInit: LoopCopyDataInit: adds r4, r0, r3 cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss + bcc CopyDataInit + bx lr FillZerobss: - str r3, [r2] - adds r2, r2, #4 + str r3, [r0] + adds r0, r0, #4 LoopFillZerobss: - cmp r2, r4 + cmp r0, r1 bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 /* Call the clock system intitialization function.*/ bl SystemInit diff --git a/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s new file mode 100644 index 0000000..f4e836d --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s @@ -0,0 +1,445 @@ +/** + ****************************************************************************** + * @file startup_stm32wb5mxx_cm4.s + * @author MCD Application Team + * @brief STM32WB5Mxx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word C2SEV_PWR_C2H_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_TIM17_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C3_EV_IRQHandler + .word I2C3_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word LPUART1_IRQHandler + .word SAI1_IRQHandler + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word CRS_IRQHandler + .word PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word LCD_IRQHandler + .word QUADSPI_IRQHandler + .word AES1_IRQHandler + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word DMA2_Channel6_IRQHandler + .word DMA2_Channel7_IRQHandler + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak AES1_IRQHandler + .thumb_set AES1_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s new file mode 100644 index 0000000..4361246 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s @@ -0,0 +1,422 @@ +;****************************************************************************** +;* File Name : startup_stm32wb30xx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB30xx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;*

© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM17_IRQHandler + B TIM1_TRG_COM_TIM17_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s new file mode 100644 index 0000000..5ada6a2 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s @@ -0,0 +1,507 @@ +;****************************************************************************** +;* File Name : startup_stm32wb35xx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB35xx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;*

© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD USB_HP_IRQHandler ; USB High Priority Interrupt + DCD USB_LP_IRQHandler ; USB Low Priority Interrupt + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 and COMP2 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD I2C3_EV_IRQHandler ; I2C3 Event Interrupt + DCD I2C3_ER_IRQHandler ; I2C3 Error Interrupt + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD SPI2_IRQHandler ; SPI2 Interrupt + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD CRS_IRQHandler ; CRS interrupt + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD QUADSPI_IRQHandler ; QUADSPI Interrupt + DCD AES1_IRQHandler ; AES1 Interrupt + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 Interrupt + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 Interrupt + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 Interrupt + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 Interrupt + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 Interrupt + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 Interrupt + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 Interrupt + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK USB_HP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_HP_IRQHandler + B USB_HP_IRQHandler + + PUBWEAK USB_LP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_LP_IRQHandler + B USB_LP_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM17_IRQHandler + B TIM1_TRG_COM_TIM17_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK LPUART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPUART1_IRQHandler + B LPUART1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CRS_IRQHandler + B CRS_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK AES1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES1_IRQHandler + B AES1_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + PUBWEAK DMA2_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel6_IRQHandler + B DMA2_Channel6_IRQHandler + + PUBWEAK DMA2_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel7_IRQHandler + B DMA2_Channel7_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s new file mode 100644 index 0000000..33a578c --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s @@ -0,0 +1,422 @@ +;****************************************************************************** +;* File Name : startup_stm32wb50xx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB50xx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;*

© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM17_IRQHandler + B TIM1_TRG_COM_TIM17_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s new file mode 100644 index 0000000..e5c75c7 --- /dev/null +++ b/CMSIS/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s @@ -0,0 +1,517 @@ +;****************************************************************************** +;* File Name : startup_stm32wb5mxx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB5Mxx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;*

© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.

+;* +;* This software component is licensed by ST under BSD 3-Clause license, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/BSD-3-Clause +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD USB_HP_IRQHandler ; USB High Priority Interrupt + DCD USB_LP_IRQHandler ; USB Low Priority Interrupt + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 and COMP2 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 global Interrupts + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Communication and TIM17 global Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD I2C3_EV_IRQHandler ; I2C3 Event Interrupt + DCD I2C3_ER_IRQHandler ; I2C3 Error Interrupt + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD SPI2_IRQHandler ; SPI2 Interrupt + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD SAI1_IRQHandler ; SAI Interrupt + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD CRS_IRQHandler ; CRS interrupt + DCD PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD LCD_IRQHandler ; LCD Interrupt + DCD QUADSPI_IRQHandler ; QUADSPI Interrupt + DCD AES1_IRQHandler ; AES1 Interrupt + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 Interrupt + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 Interrupt + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 Interrupt + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 Interrupt + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 Interrupt + DCD DMA2_Channel6_IRQHandler ; DMA2 Channel 6 Interrupt + DCD DMA2_Channel7_IRQHandler ; DMA2 Channel 7 Interrupt + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK USB_HP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_HP_IRQHandler + B USB_HP_IRQHandler + + PUBWEAK USB_LP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USB_LP_IRQHandler + B USB_LP_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_TIM16_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM16_IRQHandler + B TIM1_UP_TIM16_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM17_IRQHandler + B TIM1_TRG_COM_TIM17_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK LPUART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPUART1_IRQHandler + B LPUART1_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK CRS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CRS_IRQHandler + B CRS_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK LCD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LCD_IRQHandler + B LCD_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK AES1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES1_IRQHandler + B AES1_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + PUBWEAK DMA2_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel6_IRQHandler + B DMA2_Channel6_IRQHandler + + PUBWEAK DMA2_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Channel7_IRQHandler + B DMA2_Channel7_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/CMSIS/STM32WBxx/Source/Templates/system_stm32wbxx.c b/CMSIS/STM32WBxx/Source/Templates/system_stm32wbxx.c index 1b24a51..96f8097 100644 --- a/CMSIS/STM32WBxx/Source/Templates/system_stm32wbxx.c +++ b/CMSIS/STM32WBxx/Source/Templates/system_stm32wbxx.c @@ -161,10 +161,12 @@ const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \ 4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */ +#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) const uint32_t SmpsPrescalerTable[4UL][6UL]={{1UL,3UL,2UL,2UL,1UL,2UL}, \ {2UL,6UL,4UL,3UL,2UL,4UL}, \ {4UL,12UL,8UL,6UL,4UL,8UL}, \ {4UL,12UL,8UL,6UL,4UL,8UL}}; +#endif /** * @} @@ -221,8 +223,10 @@ void SystemInit(void) /* Reset PLLCFGR register */ RCC->PLLCFGR = 0x22041000U; +#if defined(STM32WB55xx) || defined(STM32WB5Mxx) /* Reset PLLSAI1CFGR register */ RCC->PLLSAI1CFGR = 0x22041000U; +#endif /* Reset HSEBYP bit */ RCC->CR &= 0xFFFBFFFFU; diff --git a/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h index 9274f3d..f0face3 100644 --- a/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ b/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -7,7 +7,7 @@ ****************************************************************************** * @attention * - *

© Copyright (c) 2018 STMicroelectronics. + *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, @@ -236,12 +236,12 @@ #define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE #define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE -#if defined(STM32G4) -#define DAC_CHIPCONNECT_DISABLE (DAC_CHIPCONNECT_EXTERNAL | DAC_CHIPCONNECT_BOTH) -#define DAC_CHIPCONNECT_ENABLE (DAC_CHIPCONNECT_INTERNAL | DAC_CHIPCONNECT_BOTH) +#if defined(STM32G4) || defined(STM32H7) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL #endif -#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) #define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID #define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID #endif @@ -306,8 +306,17 @@ #define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING #define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + #endif /* STM32L4 */ +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#endif + #if defined(STM32H7) #define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 @@ -365,6 +374,9 @@ #define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT #define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + #endif /* STM32H7 */ /** @@ -460,7 +472,9 @@ #define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 #define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 #define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 -#endif +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ /** * @} @@ -564,7 +578,13 @@ #define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 #define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 #define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 -#endif + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ #define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 #define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 @@ -623,6 +643,178 @@ #define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable #define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset #endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the events that can be selected to configure the + * set/reset crossbar of a timer output + */ +#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) +#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) +#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) +#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) +#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) +#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) +#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) +#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) +#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) + +#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) +#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) +#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) +#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) +#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) +#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) +#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) +#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) +#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) + +/** @brief Constants defining the event filtering applied to external events + * by a timer + */ +#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) +#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) +#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ /** * @} */ @@ -762,7 +954,7 @@ #define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 #define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 -#if defined(STM32L1) || defined(STM32L4) +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) #define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID #define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID #endif @@ -853,6 +1045,16 @@ #define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 #define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT + +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMPALL +#endif /* STM32H7 */ + /** * @} */ @@ -1246,6 +1448,30 @@ #define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY #define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F4 || STM32F7 || STM32H7 */ /** * @} */ @@ -1268,6 +1494,13 @@ #endif #define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) #define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + /** * @} */ @@ -1297,16 +1530,18 @@ #define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) -#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) #define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT #define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT #define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT #define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) #define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA #define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA #define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA #define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA -#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 */ +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */ #if defined(STM32F4) #define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT @@ -1325,6 +1560,13 @@ /** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose * @{ */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif #define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD #define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg #define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown @@ -1397,14 +1639,14 @@ #define HAL_TIM_DMAError TIM_DMAError #define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt #define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt -#if defined(STM32H7) || defined(STM32G0) || defined(STM32F7) || defined(STM32F4) || defined(STM32L0) +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) #define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro #define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT #define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback #define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent #define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT #define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA -#endif /* STM32H7 || STM32G0 || STM32F7 || STM32F4 || STM32L0 */ +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ /** * @} */ @@ -3000,9 +3242,8 @@ #define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 -#if defined(STM32L4) +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) #define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE -#elif defined(STM32WB) || defined(STM32G0) || defined(STM32G4) #else #define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK #endif @@ -3130,7 +3371,7 @@ /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32G4) +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined STM32WL #else #define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG #endif @@ -3239,21 +3480,21 @@ #define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT #define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT #define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS -#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT -#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND /* alias CMSIS for compatibilities */ #define SDIO_IRQn SDMMC1_IRQn #define SDIO_IRQHandler SDMMC1_IRQHandler #endif -#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) #define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef #define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef #define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef #define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef #endif -#if defined(STM32H7) +#if defined(STM32H7) || defined(STM32L5) #define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback #define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback #define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback @@ -3494,12 +3735,12 @@ * @{ */ #if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) -#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT -#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA -#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart -#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT -#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA -#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop #endif /** * @} @@ -3508,9 +3749,9 @@ /** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32L4) +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) #define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE -#endif +#endif /* STM32L4 || STM32F4 || STM32F7 */ /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h index 5deec1c..2d5d9a2 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h @@ -38,23 +38,26 @@ * @{ */ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup HAL_Exported_Constants HAL Exported Constants - * @{ - */ - /** @defgroup HAL_TICK_FREQ Tick Frequency * @{ */ -#define HAL_TICK_FREQ_10HZ 100U -#define HAL_TICK_FREQ_100HZ 10U -#define HAL_TICK_FREQ_1KHZ 1U -#define HAL_TICK_FREQ_DEFAULT HAL_TICK_FREQ_1KHZ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; /** * @} */ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + /** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants * @{ */ @@ -65,7 +68,9 @@ #define SYSCFG_BOOT_MAINFLASH LL_SYSCFG_REMAP_FLASH /*!< Main Flash memory mapped at 0x00000000 */ #define SYSCFG_BOOT_SYSTEMFLASH LL_SYSCFG_REMAP_SYSTEMFLASH /*!< System Flash memory mapped at 0x00000000 */ #define SYSCFG_BOOT_SRAM LL_SYSCFG_REMAP_SRAM /*!< SRAM1 mapped at 0x00000000 */ +#if defined(LL_SYSCFG_REMAP_QUADSPI) #define SYSCFG_BOOT_QUADSPI LL_SYSCFG_REMAP_QUADSPI /*!< QUADSPI memory mapped at 0x00000000 */ +#endif /** * @} */ @@ -215,7 +220,9 @@ /** @defgroup Secure_IP_Write_Access Secure IP Write Access * @{ */ +#if defined(LL_SYSCFG_SECURE_ACCESS_AES1) #define HAL_SYSCFG_SECURE_ACCESS_AES1 LL_SYSCFG_SECURE_ACCESS_AES1 /*!< Enabling the security access of Advanced Encryption Standard 1 KEY[7:0] */ +#endif #define HAL_SYSCFG_SECURE_ACCESS_AES2 LL_SYSCFG_SECURE_ACCESS_AES2 /*!< Enabling the security access of Advanced Encryption Standard 2 */ #define HAL_SYSCFG_SECURE_ACCESS_PKA LL_SYSCFG_SECURE_ACCESS_PKA /*!< Enabling the security access of Public Key Accelerator */ #define HAL_SYSCFG_SECURE_ACCESS_RNG LL_SYSCFG_SECURE_ACCESS_RNG /*!< Enabling the security access of Random Number Generator */ @@ -382,9 +389,11 @@ */ #define __HAL_SYSCFG_REMAPMEMORY_SRAM() LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SRAM) +#if defined(LL_SYSCFG_REMAP_QUADSPI) /** @brief QUADSPI mapped at 0x00000000. */ #define __HAL_SYSCFG_REMAPMEMORY_QUADSPI() LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_QUADSPI) +#endif /** * @brief Return the boot mode as configured by user. @@ -393,7 +402,9 @@ * @arg @ref SYSCFG_BOOT_MAINFLASH * @arg @ref SYSCFG_BOOT_SYSTEMFLASH * @arg @ref SYSCFG_BOOT_SRAM +#if defined(LL_SYSCFG_REMAP_QUADSPI) * @arg @ref SYSCFG_BOOT_QUADSPI +#endif */ #define __HAL_SYSCFG_GET_BOOT_MODE() LL_SYSCFG_GetRemapMemory() @@ -510,6 +521,7 @@ #define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFU)) +#if defined(VREFBUF) #define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) @@ -517,16 +529,23 @@ ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) #define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif #define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#if defined(LL_SYSCFG_SECURE_ACCESS_AES1) #define IS_SYSCFG_SECURITY_ACCESS(__VALUE__) ((((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_AES1) == HAL_SYSCFG_SECURE_ACCESS_AES1) || \ (((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_AES2) == HAL_SYSCFG_SECURE_ACCESS_AES2) || \ (((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_PKA) == HAL_SYSCFG_SECURE_ACCESS_PKA) || \ (((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_RNG) == HAL_SYSCFG_SECURE_ACCESS_RNG)) +#else +#define IS_SYSCFG_SECURITY_ACCESS(__VALUE__) ((((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_AES2) == HAL_SYSCFG_SECURE_ACCESS_AES2) || \ + (((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_PKA) == HAL_SYSCFG_SECURE_ACCESS_PKA) || \ + (((__VALUE__) & HAL_SYSCFG_SECURE_ACCESS_RNG) == HAL_SYSCFG_SECURE_ACCESS_RNG)) +#endif /** * @} @@ -578,8 +597,8 @@ void HAL_IncTick(void); void HAL_Delay(uint32_t Delay); uint32_t HAL_GetTick(void); uint32_t HAL_GetTickPrio(void); -HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq); -uint32_t HAL_GetTickFreq(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); void HAL_SuspendTick(void); void HAL_ResumeTick(void); uint32_t HAL_GetHalVersion(void); @@ -614,7 +633,7 @@ void HAL_DBGMCU_DisableDBGStandbyMode(void); */ extern __IO uint32_t uwTick; extern uint32_t uwTickPrio; -extern uint32_t uwTickFreq; +extern HAL_TickFreqTypeDef uwTickFreq; /** * @} */ @@ -628,11 +647,13 @@ void HAL_SYSCFG_SRAM2Erase(void); void HAL_SYSCFG_DisableSRAMFetch(void); uint32_t HAL_SYSCFG_IsEnabledSRAMFetch(void); +#if defined(VREFBUF) void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); void HAL_SYSCFG_DisableVREFBUF(void); +#endif void HAL_SYSCFG_EnableIOBooster(void); void HAL_SYSCFG_DisableIOBooster(void); diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h index ae97205..b962634 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h @@ -22,7 +22,7 @@ #define STM32WBxx_HAL_ADC_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -66,7 +66,7 @@ typedef struct (the oversampling buffer is zeroed during injection sequence). This parameter can be a value of @ref ADC_HAL_EC_OVS_SCOPE_REG */ -}ADC_OversamplingTypeDef; +} ADC_OversamplingTypeDef; /** * @brief Structure definition of ADC instance and ADC group regular. @@ -89,6 +89,10 @@ typedef struct uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from system clock or PLL (Refer to reference manual for list of clocks available)) and clock prescaler. This parameter can be a value of @ref ADC_HAL_EC_COMMON_CLOCK_SOURCE. Note: The ADC clock configuration is common to all ADC instances. + Note: ADC clock source and prescaler must be selected in function of system clock to not exceed ADC maximum frequency, depending on devices. + Example: STM32WB55xx ADC maximum frequency is 64MHz (corresponding to 4.27Msmp/s maximum) + Example: STM32WB50xx ADC maximum frequency is 32MHz (corresponding to 2.13Msmp/s maximum) + For ADC maximum frequency, refer to datasheet of the selected device. Note: In case of usage of channels on injected group, ADC frequency should be lower than AHB clock frequency /4 for resolution 12 or 10 bits, AHB clock frequency /3 for resolution 8 bits, AHB clock frequency /2 for resolution 6 bits. Note: In case of synchronous clock mode based on HCLK/1, the configuration must be enabled only @@ -121,8 +125,8 @@ typedef struct This feature automatically adapts the frequency of ADC conversions triggers to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications. This parameter can be set to ENABLE or DISABLE. - Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they clear immediately the EOC flag - to free the IRQ vector sequencer. + Note: It is not recommended to use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since these modes have to clear immediately the EOC flag (by CPU to free the IRQ pending event or by DMA). + Auto wait will work but fort a very short time, discarding its intended benefit (except specific case of high load of CPU or DMA transfers which can justify usage of auto wait). Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when ADC conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start. (in case of usage of ADC group injected, use the equivalent functions HAL_ADCExInjected_Start(), HAL_ADCEx_InjectedGetValue(), ...). */ @@ -179,7 +183,7 @@ typedef struct ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */ -}ADC_InitTypeDef; +} ADC_InitTypeDef; /** * @brief Structure definition of ADC channel for regular group @@ -237,7 +241,7 @@ typedef struct Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). */ -}ADC_ChannelConfTypeDef; +} ADC_ChannelConfTypeDef; /** * @brief Structure definition of ADC analog watchdog @@ -284,7 +288,7 @@ typedef struct impacted: the comparison of analog watchdog thresholds is done on oversampling final computation (after ratio and shift application): ADC data register bitfield [15:4] (12 most significant bits). */ -}ADC_AnalogWDGConfTypeDef; +} ADC_AnalogWDGConfTypeDef; /** * @brief ADC group injected contexts queue configuration @@ -297,7 +301,7 @@ typedef struct JSQR register at HAL_ADCEx_InjectedConfigChannel() last call */ uint32_t ChannelCount; /*!< Number of channels in the injected sequence */ -}ADC_InjectionConfigTypeDef; +} ADC_InjectionConfigTypeDef; /** @defgroup ADC_States ADC States * @{ @@ -377,7 +381,7 @@ typedef struct void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ #endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ -}ADC_HandleTypeDef; +} ADC_HandleTypeDef; #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) /** @@ -969,10 +973,10 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) #define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ do{ \ - (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) #else #define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ ((__HANDLE__)->State = HAL_ADC_STATE_RESET) @@ -1129,7 +1133,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @retval Value between Min_Data=0 and Max_Data=18 */ #define __HAL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ - __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) + __LL_ADC_CHANNEL_TO_DECIMAL_NB((__CHANNEL__)) /** * @brief Helper macro to get ADC channel in literal format ADC_CHANNEL_x @@ -1169,7 +1173,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). */ #define __HAL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ - __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) + __LL_ADC_DECIMAL_NB_TO_CHANNEL((__DECIMAL_NB__)) /** * @brief Helper macro to determine whether the selected channel @@ -1218,7 +1222,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. */ #define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ - __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) /** * @brief Helper macro to convert a channel defined from parameter @@ -1281,7 +1285,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_CHANNEL_18 */ #define __HAL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \ - __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) + __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL((__CHANNEL__)) /** * @brief Helper macro to determine whether the internal channel @@ -1305,7 +1309,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * Value "1" if the internal channel selected is available on the ADC instance selected. */ #define __HAL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \ - __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) + __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE((__ADC_INSTANCE__), (__CHANNEL__)) /** * @brief Helper macro to select the ADC common instance @@ -1318,7 +1322,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @retval ADC common register instance */ #define __HAL_ADC_COMMON_INSTANCE(__ADCx__) \ - __LL_ADC_COMMON_INSTANCE((__ADCx__)) + __LL_ADC_COMMON_INSTANCE((__ADCx__)) /** * @brief Helper macro to check if all ADC instances sharing the same @@ -1338,7 +1342,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * is enabled. */ #define __HAL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \ - __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) + __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE((__ADCXY_COMMON__)) /** * @brief Helper macro to define the ADC conversion data full-scale digital @@ -1354,7 +1358,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @retval ADC conversion data full-scale digital value */ #define __HAL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \ - __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) + __LL_ADC_DIGITAL_SCALE((__ADC_RESOLUTION__)) /** * @brief Helper macro to convert the ADC conversion data from @@ -1377,9 +1381,9 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ __ADC_RESOLUTION_CURRENT__,\ __ADC_RESOLUTION_TARGET__) \ - __LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__),\ - (__ADC_RESOLUTION_CURRENT__),\ - (__ADC_RESOLUTION_TARGET__)) + __LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__), \ + (__ADC_RESOLUTION_CURRENT__), \ + (__ADC_RESOLUTION_TARGET__)) /** * @brief Helper macro to calculate the voltage (unit: mVolt) @@ -1400,9 +1404,9 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\ __ADC_DATA__,\ __ADC_RESOLUTION__) \ - __LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__),\ - (__ADC_DATA__),\ - (__ADC_RESOLUTION__)) + __LL_ADC_CALC_DATA_TO_VOLTAGE((__VREFANALOG_VOLTAGE__), \ + (__ADC_DATA__), \ + (__ADC_RESOLUTION__)) /** * @brief Helper macro to calculate analog reference voltage (Vref+) @@ -1431,8 +1435,8 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to */ #define __HAL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ __ADC_RESOLUTION__) \ - __LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__),\ - (__ADC_RESOLUTION__)) + __LL_ADC_CALC_VREFANALOG_VOLTAGE((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__)) /** * @brief Helper macro to calculate the temperature (unit: degree Celsius) @@ -1482,9 +1486,9 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define __HAL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\ __TEMPSENSOR_ADC_DATA__,\ __ADC_RESOLUTION__) \ - __LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__),\ - (__TEMPSENSOR_ADC_DATA__),\ - (__ADC_RESOLUTION__)) + __LL_ADC_CALC_TEMPERATURE((__VREFANALOG_VOLTAGE__), \ + (__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__)) /** * @brief Helper macro to calculate the temperature (unit: degree Celsius) @@ -1536,12 +1540,12 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to __VREFANALOG_VOLTAGE__,\ __TEMPSENSOR_ADC_DATA__,\ __ADC_RESOLUTION__) \ - __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__),\ - (__TEMPSENSOR_TYP_CALX_V__),\ - (__TEMPSENSOR_CALX_TEMP__),\ - (__VREFANALOG_VOLTAGE__),\ - (__TEMPSENSOR_ADC_DATA__),\ - (__ADC_RESOLUTION__)) + __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_TYP_AVGSLOPE__), \ + (__TEMPSENSOR_TYP_CALX_V__), \ + (__TEMPSENSOR_CALX_TEMP__), \ + (__VREFANALOG_VOLTAGE__), \ + (__TEMPSENSOR_ADC_DATA__), \ + (__ADC_RESOLUTION__)) /** * @} @@ -1564,14 +1568,15 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @{ */ /* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) /* Callbacks Register/UnRegister functions ***********************************/ -HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ /** @@ -1585,39 +1590,39 @@ HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_Ca /* IO operation functions *****************************************************/ /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); /* Non-blocking mode: Interruption */ -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); /* Non-blocking mode: DMA */ -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); /* ADC retrieve conversion value intended to be used with polling or interruption */ -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc); /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); /** * @} */ /** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * @{ - */ + * @brief Peripheral Control functions + * @{ + */ /* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig); /** * @} @@ -1627,7 +1632,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_Ana /** @addtogroup ADC_Exported_Functions_Group4 * @{ */ -uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc); +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc); uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); /** @@ -1642,9 +1647,9 @@ uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); /** @addtogroup ADC_Private_Functions ADC Private Functions * @{ */ -HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t ConversionGroup); -HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t ConversionGroup); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); void ADC_DMAError(DMA_HandleTypeDef *hdma); diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h index cf27c92..2bf99de 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h @@ -22,7 +22,7 @@ #define STM32WBxx_HAL_ADC_EX_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -51,7 +51,7 @@ typedef struct uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ -}ADC_InjOversamplingTypeDef; +} ADC_InjOversamplingTypeDef; /** * @brief Structure definition of ADC group injected and ADC channel affected to ADC group injected @@ -169,7 +169,7 @@ typedef struct ADC_InjOversamplingTypeDef InjecOversampling; /*!< Specifies the Oversampling parameters. Caution: this setting overwrites the previous oversampling configuration if oversampling already enabled. Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ -}ADC_InjectionConfTypeDef; +} ADC_InjectionConfTypeDef; /** * @} @@ -386,7 +386,7 @@ typedef struct * @retval None */ #define ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, __OFFSET__) \ - ((__OFFSET__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) + ((__OFFSET__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) /** * @brief Shift the AWD1 threshold with respect to the selected ADC resolution. @@ -401,7 +401,7 @@ typedef struct * @retval None */ #define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ - ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) + ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) /** * @brief Shift the AWD2 and AWD3 threshold with respect to the selected ADC resolution. @@ -416,8 +416,8 @@ typedef struct */ #define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0)) ? \ - ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ - ((__THRESHOLD__) << 2UL) \ + ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ + ((__THRESHOLD__) << 2UL) \ ) /** @@ -568,10 +568,10 @@ typedef struct * @param __EDGE__ programmed ADC edge trigger setting. * @retval SET (__EDGE__ is a valid value) or RESET (__EDGE__ is invalid) */ -#define IS_ADC_EXTTRIGINJEC_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ - ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) +#define IS_ADC_EXTTRIGINJEC_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) /** * @brief Verify the ADC analog watchdog setting. @@ -600,21 +600,21 @@ typedef struct * @param __CONVERSION__ ADC conversion group. * @retval SET (__CONVERSION__ is valid) or RESET (__CONVERSION__ is invalid) */ -#define IS_ADC_CONVERSION_GROUP(__CONVERSION__) (((__CONVERSION__) == ADC_REGULAR_GROUP) || \ - ((__CONVERSION__) == ADC_INJECTED_GROUP) || \ - ((__CONVERSION__) == ADC_REGULAR_INJECTED_GROUP) ) +#define IS_ADC_CONVERSION_GROUP(__CONVERSION__) (((__CONVERSION__) == ADC_REGULAR_GROUP) || \ + ((__CONVERSION__) == ADC_INJECTED_GROUP) || \ + ((__CONVERSION__) == ADC_REGULAR_INJECTED_GROUP) ) /** * @brief Verify the ADC event type. * @param __EVENT__ ADC event. * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) */ -#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ - ((__EVENT__) == ADC_AWD_EVENT) || \ - ((__EVENT__) == ADC_AWD2_EVENT) || \ - ((__EVENT__) == ADC_AWD3_EVENT) || \ - ((__EVENT__) == ADC_OVR_EVENT) || \ - ((__EVENT__) == ADC_JQOVF_EVENT) ) +#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ + ((__EVENT__) == ADC_AWD_EVENT) || \ + ((__EVENT__) == ADC_AWD2_EVENT) || \ + ((__EVENT__) == ADC_AWD3_EVENT) || \ + ((__EVENT__) == ADC_OVR_EVENT) || \ + ((__EVENT__) == ADC_JQOVF_EVENT) ) /** * @brief Verify the ADC oversampling ratio. @@ -697,33 +697,34 @@ typedef struct /* IO operation functions *****************************************************/ /* ADC calibration */ -HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff); +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); -HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, + uint32_t CalibrationFactor); /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); /* Non-blocking mode: Interruption */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc); /* ADC retrieve conversion value intended to be used with polling or interruption */ -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank); /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ -void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef* hadc); +void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); /* ADC group regular conversions stop */ -HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc); /** * @} */ @@ -732,11 +733,11 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef* hadc); * @{ */ /* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); -HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc,ADC_InjectionConfTypeDef* sConfigInjected); +HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc); /** * @} diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h index 519c17a..b7908ee 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h @@ -32,7 +32,7 @@ extern "C" { /** @addtogroup STM32WBxx_HAL_Driver * @{ */ - +#if defined (COMP1) || defined (COMP2) /** @addtogroup COMP * @{ @@ -697,7 +697,7 @@ uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp); /** * @} */ - +#endif /* COMP1 || COMP2 */ /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h index fc06219..465b168 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h @@ -174,17 +174,17 @@ */ #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0 -#define PREFETCH_ENABLE 0 -#define INSTRUCTION_CACHE_ENABLE 1 -#define DATA_CACHE_ENABLE 1 +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U /* ########################## Assert Selection ############################## */ /** * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ -/* #define USE_FULL_ASSERT 1 */ +/* #define USE_FULL_ASSERT 1U */ /* ################## SPI peripheral configuration ########################## */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h index f800174..e6d4ae0 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cortex.h @@ -27,7 +27,6 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal_def.h" -#include "stm32wb55xx.h" /** @addtogroup STM32WBxx_HAL_Driver * @{ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h index 391636f..ec5c1d4 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h @@ -182,10 +182,12 @@ typedef struct uint32_t Key_saved[8]; /*!< copy of key registers */ - uint32_t Size_saved; /*!< copy of input buffer size */ + uint16_t Size_saved; /*!< copy of input buffer size */ uint16_t CrypHeaderCount_saved; /*!< copy of CRYP header data counter when processing is suspended */ + uint32_t SizesSum_saved; /*!< copy of SizesSum when processing is suspended */ + uint32_t ResumingFlag; /*!< resumption flag to bypass steps already carried out */ FunctionalState AutoKeyDerivation_saved; /*!< copy of CRYP handle auto key derivation parameter */ @@ -565,6 +567,12 @@ uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); #define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ ((CONFIG) == CRYP_KEYIVCONFIG_ONCE)) +#define IS_CRYP_BUFFERSIZE(ALGO, DATAWIDTH, SIZE) \ + (((((ALGO) == CRYP_AES_ECB) || ((ALGO) == CRYP_AES_CBC) || ((ALGO) == CRYP_AES_CTR)) && \ + ((((DATAWIDTH) == CRYP_DATAWIDTHUNIT_WORD) && (((SIZE) % 4U) == 0U)) || \ + (((DATAWIDTH) == CRYP_DATAWIDTHUNIT_BYTE) && (((SIZE) % 16U) == 0U)))) || \ + (((ALGO)== CRYP_AES_GCM_GMAC) || ((ALGO) == CRYP_AES_CCM))) + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h index 01e5650..add713e 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_dma.h @@ -204,8 +204,10 @@ typedef struct __DMA_HandleTypeDef #define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LP_UART1_RX request */ #define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LP_UART1_RX request */ +#if defined (SAI1) #define DMA_REQUEST_SAI1_A LL_DMAMUX_REQ_SAI1_A /*!< DMAMUX SAI1 A request */ #define DMA_REQUEST_SAI1_B LL_DMAMUX_REQ_SAI1_B /*!< DMAMUX SAI1 B request */ +#endif /* SAI1 */ #define DMA_REQUEST_QUADSPI LL_DMAMUX_REQ_QUADSPI /*!< DMAMUX QUADSPI request */ @@ -361,7 +363,7 @@ typedef struct __DMA_HandleTypeDef * @{ */ -/** @brief Reset DMA handle state +/** @brief Reset DMA handle state. * @param __HANDLE__ DMA handle * @retval None */ @@ -385,11 +387,12 @@ typedef struct __DMA_HandleTypeDef /* Interrupt & Flag management */ /** - * @brief Returns the current DMA Channel transfer complete flag. + * @brief Return the current DMA Channel transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified transfer complete flag index. */ +#if defined(DMA2) #define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ @@ -404,12 +407,23 @@ typedef struct __DMA_HandleTypeDef ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TC6 :\ DMA_FLAG_TC7) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) +#endif /** - * @brief Returns the current DMA Channel half transfer complete flag. + * @brief Return the current DMA Channel half transfer complete flag. * @param __HANDLE__ DMA handle * @retval The specified half transfer complete flag index. */ +#if defined(DMA2) #define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ @@ -424,12 +438,23 @@ typedef struct __DMA_HandleTypeDef ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_HT6 :\ DMA_FLAG_HT7) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) +#endif /** - * @brief Returns the current DMA Channel transfer error flag. + * @brief Return the current DMA Channel transfer error flag. * @param __HANDLE__ DMA handle * @retval The specified transfer error flag index. */ +#if defined(DMA2) #define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ @@ -444,12 +469,23 @@ typedef struct __DMA_HandleTypeDef ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TE6 :\ DMA_FLAG_TE7) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) +#endif /** - * @brief Returns the current DMA Channel Global interrupt flag. + * @brief Return the current DMA Channel Global interrupt flag. * @param __HANDLE__ DMA handle * @retval The specified transfer error flag index. */ +#if defined(DMA2) #define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_ISR_GIF1 :\ @@ -464,6 +500,16 @@ typedef struct __DMA_HandleTypeDef ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_ISR_GIF6 :\ DMA_ISR_GIF7) +#else +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + DMA_ISR_GIF7) +#endif /** * @brief Get the DMA Channel pending flags. @@ -477,8 +523,12 @@ typedef struct __DMA_HandleTypeDef * Where x can be from 1 to 7 to select the DMA Channel x flag. * @retval The state of FLAG (SET or RESET). */ +#if defined(DMA2) #define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) +#else +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) +#endif /** * @brief Clear the DMA Channel pending flags. @@ -492,8 +542,12 @@ typedef struct __DMA_HandleTypeDef * Where x can be from 1 to 7 to select the DMA Channel x flag. * @retval None */ +#if defined(DMA2) #define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) +#else +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) +#endif /** * @brief Enable the specified DMA Channel interrupts. @@ -532,7 +586,7 @@ typedef struct __DMA_HandleTypeDef #define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) /** - * @brief Returns the number of remaining data units in the current DMA Channel transfer. + * @brief Return the number of remaining data units in the current DMA Channel transfer. * @param __HANDLE__ DMA handle * @retval The number of remaining data units in the current DMA Channel transfer. */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h index 63caaa5..e1eccc6 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h @@ -105,18 +105,39 @@ typedef struct #define EXTI_LINE_17 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x11u) #define EXTI_LINE_18 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x12u) #define EXTI_LINE_19 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x13u) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define EXTI_LINE_20 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x14u) #define EXTI_LINE_21 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x15u) +#else +#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u) +#define EXTI_LINE_21 (EXTI_RESERVED | EXTI_REG1 | 0x15u) +#endif #define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u) +#else +#define EXTI_LINE_23 (EXTI_RESERVED | EXTI_REG1 | 0x17u) +#endif #define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u) +#else +#define EXTI_LINE_25 (EXTI_RESERVED | EXTI_REG1 | 0x19u) +#endif #define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au) #define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu) +#else +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#endif #define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du) #define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define EXTI_LINE_31 (EXTI_CONFIG | EXTI_REG1 | 0x1Fu) +#else +#define EXTI_LINE_31 (EXTI_RESERVED | EXTI_REG1 | 0x1Fu) +#endif #define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u) #define EXTI_LINE_33 (EXTI_CONFIG | EXTI_REG2 | 0x01u) #define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) @@ -128,7 +149,11 @@ typedef struct #define EXTI_LINE_40 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | 0x08u) #define EXTI_LINE_41 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | 0x09u) #define EXTI_LINE_42 (EXTI_DIRECT | EXTI_REG2 | 0x0Au) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define EXTI_LINE_43 (EXTI_DIRECT | EXTI_REG2 | 0x0Bu) +#else +#define EXTI_LINE_43 (EXTI_RESERVED | EXTI_REG2 | 0x0Bu) +#endif #define EXTI_LINE_44 (EXTI_DIRECT | EXTI_REG2 | 0x0Cu) #define EXTI_LINE_45 (EXTI_DIRECT | EXTI_REG2 | 0x0Du) #define EXTI_LINE_46 (EXTI_DIRECT | EXTI_REG2 | 0x0Eu) @@ -166,7 +191,9 @@ typedef struct #define EXTI_GPIOA 0x00000000u #define EXTI_GPIOB 0x00000001u #define EXTI_GPIOC 0x00000002u +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define EXTI_GPIOD 0x00000003u +#endif #define EXTI_GPIOE 0x00000004u #define EXTI_GPIOH 0x00000007u /** @@ -255,12 +282,20 @@ typedef struct #define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u) +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOD) || \ ((__PORT__) == EXTI_GPIOE) || \ ((__PORT__) == EXTI_GPIOH)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) +#endif #define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h index 0bcd2e9..0dd6798 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h @@ -46,7 +46,7 @@ extern "C" { */ typedef struct { - uint32_t TypeErase; /*!< Mass erase or page erase. + uint32_t TypeErase; /*!< Page erase. This parameter can be a value of @ref FLASH_TYPE_ERASE */ uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled This parameter must be a value between 0 and (FLASH_PAGE_NB - 1) */ @@ -150,10 +150,10 @@ typedef struct /** @defgroup FLASH_LATENCY FLASH Latency * @{ */ -#define FLASH_LATENCY_0 0x00000000UL /*!< FLASH Zero wait state */ -#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One wait state */ -#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ -#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_2 /*!< FLASH Three wait states */ +#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ +#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ /** * @} */ @@ -179,12 +179,14 @@ typedef struct #define FLASH_FLAG_ECCC FLASH_ECCR_ECCC /*!< FLASH ECC correction */ #define FLASH_FLAG_ECCD FLASH_ECCR_ECCD /*!< FLASH ECC detection */ -#define FLASH_FLAG_SR_ERROR (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \ +#define FLASH_FLAG_SR_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \ FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | FLASH_FLAG_PGSERR | \ FLASH_FLAG_MISERR | FLASH_FLAG_FASTERR | FLASH_FLAG_RDERR | \ FLASH_FLAG_OPTVERR) /*!< All SR error flags */ -#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_SR_ERROR | FLASH_FLAG_ECCC | FLASH_FLAG_ECCD) +#define FLASH_FLAG_ECCR_ERRORS (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD) + +#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_SR_ERRORS | FLASH_FLAG_ECCR_ERRORS) /** @defgroup FLASH_INTERRUPT_DEFINITION FLASH Interrupts Definition * @brief FLASH Interrupt definition @@ -212,7 +214,6 @@ typedef struct #define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR #define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR #define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR -#define HAL_FLASH_ERROR_ECCD FLASH_FLAG_ECCD /** * @} */ @@ -221,7 +222,6 @@ typedef struct * @{ */ #define FLASH_TYPEERASE_PAGES FLASH_CR_PER /*!< Pages erase only*/ -#define FLASH_TYPEERASE_MASSERASE FLASH_CR_MER /*!< Flash mass erase activation*/ /** * @} */ @@ -480,39 +480,39 @@ typedef struct * @{ */ -#define SRAM2A_START_SECURE_ADDR_0 0x20030000U /* When in secure mode 0x20030000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_1 0x20030400U /* When in secure mode 0x20030400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_2 0x20030800U /* When in secure mode 0x20030800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_3 0x20030C00U /* When in secure mode 0x20030C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_4 0x20031000U /* When in secure mode 0x20031000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_5 0x20031400U /* When in secure mode 0x20031400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_6 0x20031800U /* When in secure mode 0x20031800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_7 0x20031C00U /* When in secure mode 0x20031C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_8 0x20032000U /* When in secure mode 0x20032000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_9 0x20032400U /* When in secure mode 0x20032400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_10 0x20032800U /* When in secure mode 0x20032800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_11 0x20032C00U /* When in secure mode 0x20032C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_12 0x20033000U /* When in secure mode 0x20033000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_13 0x20033400U /* When in secure mode 0x20033400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_14 0x20033800U /* When in secure mode 0x20033800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_15 0x20033C00U /* When in secure mode 0x20033C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_16 0x20034000U /* When in secure mode 0x20034000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_17 0x20034400U /* When in secure mode 0x20034400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_18 0x20034800U /* When in secure mode 0x20034800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_19 0x20034C00U /* When in secure mode 0x20034C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_20 0x20035000U /* When in secure mode 0x20035000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_21 0x20035400U /* When in secure mode 0x20035400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_22 0x20035800U /* When in secure mode 0x20035800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_23 0x20035C00U /* When in secure mode 0x20035C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_24 0x20036000U /* When in secure mode 0x20036000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_25 0x20036400U /* When in secure mode 0x20036400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_26 0x20036800U /* When in secure mode 0x20036800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_27 0x20036C00U /* When in secure mode 0x20036C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_28 0x20037000U /* When in secure mode 0x20037000 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_29 0x20037400U /* When in secure mode 0x20037400 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_30 0x20037800U /* When in secure mode 0x20037800 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_START_SECURE_ADDR_31 0x20037C00U /* When in secure mode 0x20037C00 - 0x20037FFF is accessible only by M0 Plus */ -#define SRAM2A_FULL_UNSECURE 0x20040000U /* The RAM2A is accessible to M0 Plus and M4 */ +#define SRAM2A_START_SECURE_ADDR_0 (SRAM2A_BASE + 0x0000U) /* When in secure mode (SRAM2A_BASE + 0x0000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_1 (SRAM2A_BASE + 0x0400U) /* When in secure mode (SRAM2A_BASE + 0x0400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_2 (SRAM2A_BASE + 0x0800U) /* When in secure mode (SRAM2A_BASE + 0x0800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_3 (SRAM2A_BASE + 0x0C00U) /* When in secure mode (SRAM2A_BASE + 0x0C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_4 (SRAM2A_BASE + 0x1000U) /* When in secure mode (SRAM2A_BASE + 0x1000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_5 (SRAM2A_BASE + 0x1400U) /* When in secure mode (SRAM2A_BASE + 0x1400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_6 (SRAM2A_BASE + 0x1800U) /* When in secure mode (SRAM2A_BASE + 0x1800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_7 (SRAM2A_BASE + 0x1C00U) /* When in secure mode (SRAM2A_BASE + 0x1C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_8 (SRAM2A_BASE + 0x2000U) /* When in secure mode (SRAM2A_BASE + 0x2000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_9 (SRAM2A_BASE + 0x2400U) /* When in secure mode (SRAM2A_BASE + 0x2400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_10 (SRAM2A_BASE + 0x2800U) /* When in secure mode (SRAM2A_BASE + 0x2800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_11 (SRAM2A_BASE + 0x2C00U) /* When in secure mode (SRAM2A_BASE + 0x2C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_12 (SRAM2A_BASE + 0x3000U) /* When in secure mode (SRAM2A_BASE + 0x3000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_13 (SRAM2A_BASE + 0x3400U) /* When in secure mode (SRAM2A_BASE + 0x3400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_14 (SRAM2A_BASE + 0x3800U) /* When in secure mode (SRAM2A_BASE + 0x3800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_15 (SRAM2A_BASE + 0x3C00U) /* When in secure mode (SRAM2A_BASE + 0x3C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_16 (SRAM2A_BASE + 0x4000U) /* When in secure mode (SRAM2A_BASE + 0x4000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_17 (SRAM2A_BASE + 0x4400U) /* When in secure mode (SRAM2A_BASE + 0x4400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_18 (SRAM2A_BASE + 0x4800U) /* When in secure mode (SRAM2A_BASE + 0x4800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_19 (SRAM2A_BASE + 0x4C00U) /* When in secure mode (SRAM2A_BASE + 0x4C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_20 (SRAM2A_BASE + 0x5000U) /* When in secure mode (SRAM2A_BASE + 0x5000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_21 (SRAM2A_BASE + 0x5400U) /* When in secure mode (SRAM2A_BASE + 0x5400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_22 (SRAM2A_BASE + 0x5800U) /* When in secure mode (SRAM2A_BASE + 0x5800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_23 (SRAM2A_BASE + 0x5C00U) /* When in secure mode (SRAM2A_BASE + 0x5C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_24 (SRAM2A_BASE + 0x6000U) /* When in secure mode (SRAM2A_BASE + 0x6000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_25 (SRAM2A_BASE + 0x6400U) /* When in secure mode (SRAM2A_BASE + 0x6400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_26 (SRAM2A_BASE + 0x6800U) /* When in secure mode (SRAM2A_BASE + 0x6800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_27 (SRAM2A_BASE + 0x6C00U) /* When in secure mode (SRAM2A_BASE + 0x6C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_28 (SRAM2A_BASE + 0x7000U) /* When in secure mode (SRAM2A_BASE + 0x7000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_29 (SRAM2A_BASE + 0x7400U) /* When in secure mode (SRAM2A_BASE + 0x7400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_30 (SRAM2A_BASE + 0x7800U) /* When in secure mode (SRAM2A_BASE + 0x7800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_START_SECURE_ADDR_31 (SRAM2A_BASE + 0x7C00U) /* When in secure mode (SRAM2A_BASE + 0x7C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2A_FULL_UNSECURE (SRAM2A_BASE + 0x8000U) /* The RAM2A is accessible to M0 Plus and M4 */ /** * @} @@ -522,39 +522,39 @@ typedef struct * @{ */ -#define SRAM2B_START_SECURE_ADDR_0 0x20038000U /* When in secure mode 0x20038000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_1 0x20038400U /* When in secure mode 0x20038400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_2 0x20038800U /* When in secure mode 0x20038800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_3 0x20038C00U /* When in secure mode 0x20038C00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_4 0x20039000U /* When in secure mode 0x20039000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_5 0x20039400U /* When in secure mode 0x20039400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_6 0x20039800U /* When in secure mode 0x20039800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_7 0x20039C00U /* When in secure mode 0x20039C00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_8 0x2003A000U /* When in secure mode 0x2003A000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_9 0x2003A400U /* When in secure mode 0x2003A400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_10 0x2003A800U /* When in secure mode 0x2003A800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_11 0x2003AC00U /* When in secure mode 0x2003AC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_12 0x2003B000U /* When in secure mode 0x2003B000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_13 0x2003B400U /* When in secure mode 0x2003B400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_14 0x2003B800U /* When in secure mode 0x2003B800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_15 0x2003BC00U /* When in secure mode 0x2003BC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_16 0x2003C000U /* When in secure mode 0x2003C000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_17 0x2003C400U /* When in secure mode 0x2003C400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_18 0x2003C800U /* When in secure mode 0x2003C800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_19 0x2003CC00U /* When in secure mode 0x2003CC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_20 0x2003D000U /* When in secure mode 0x2003D000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_21 0x2003D400U /* When in secure mode 0x2003D400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_22 0x2003D800U /* When in secure mode 0x2003D800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_23 0x2003DC00U /* When in secure mode 0x2003DC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_24 0x2003E000U /* When in secure mode 0x2003E000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_25 0x2003E400U /* When in secure mode 0x2003E400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_26 0x2003E800U /* When in secure mode 0x2003E800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_27 0x2003EC00U /* When in secure mode 0x2003EC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_28 0x2003F000U /* When in secure mode 0x2003F000 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_29 0x2003F400U /* When in secure mode 0x2003F400 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_30 0x2003F800U /* When in secure mode 0x2003F800 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_START_SECURE_ADDR_31 0x2003FC00U /* When in secure mode 0x2003FC00 - 0x2003FFFF is accessible only by M0 Plus */ -#define SRAM2B_FULL_UNSECURE 0x2003FF00U /* The RAM2B is accessible to M0 Plus and M4 */ +#define SRAM2B_START_SECURE_ADDR_0 (SRAM2B_BASE + 0x0000U) /* When in secure mode (SRAM2B_BASE + 0x0000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_1 (SRAM2B_BASE + 0x0400U) /* When in secure mode (SRAM2B_BASE + 0x0400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_2 (SRAM2B_BASE + 0x0800U) /* When in secure mode (SRAM2B_BASE + 0x0800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_3 (SRAM2B_BASE + 0x0C00U) /* When in secure mode (SRAM2B_BASE + 0x0C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_4 (SRAM2B_BASE + 0x1000U) /* When in secure mode (SRAM2B_BASE + 0x1000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_5 (SRAM2B_BASE + 0x1400U) /* When in secure mode (SRAM2B_BASE + 0x1400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_6 (SRAM2B_BASE + 0x1800U) /* When in secure mode (SRAM2B_BASE + 0x1800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_7 (SRAM2B_BASE + 0x1C00U) /* When in secure mode (SRAM2B_BASE + 0x1C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_8 (SRAM2B_BASE + 0x2000U) /* When in secure mode (SRAM2B_BASE + 0x2000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_9 (SRAM2B_BASE + 0x2400U) /* When in secure mode (SRAM2B_BASE + 0x2400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_10 (SRAM2B_BASE + 0x2800U) /* When in secure mode (SRAM2B_BASE + 0x2800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_11 (SRAM2B_BASE + 0x2C00U) /* When in secure mode (SRAM2B_BASE + 0x2C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_12 (SRAM2B_BASE + 0x3000U) /* When in secure mode (SRAM2B_BASE + 0x3000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_13 (SRAM2B_BASE + 0x3400U) /* When in secure mode (SRAM2B_BASE + 0x3400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_14 (SRAM2B_BASE + 0x3800U) /* When in secure mode (SRAM2B_BASE + 0x3800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_15 (SRAM2B_BASE + 0x3C00U) /* When in secure mode (SRAM2B_BASE + 0x3C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_16 (SRAM2B_BASE + 0x4000U) /* When in secure mode (SRAM2B_BASE + 0x4000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_17 (SRAM2B_BASE + 0x4400U) /* When in secure mode (SRAM2B_BASE + 0x4400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_18 (SRAM2B_BASE + 0x4800U) /* When in secure mode (SRAM2B_BASE + 0x4800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_19 (SRAM2B_BASE + 0x4C00U) /* When in secure mode (SRAM2B_BASE + 0x4C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_20 (SRAM2B_BASE + 0x5000U) /* When in secure mode (SRAM2B_BASE + 0x5000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_21 (SRAM2B_BASE + 0x5400U) /* When in secure mode (SRAM2B_BASE + 0x5400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_22 (SRAM2B_BASE + 0x5800U) /* When in secure mode (SRAM2B_BASE + 0x5800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_23 (SRAM2B_BASE + 0x5C00U) /* When in secure mode (SRAM2B_BASE + 0x5C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_24 (SRAM2B_BASE + 0x6000U) /* When in secure mode (SRAM2B_BASE + 0x6000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_25 (SRAM2B_BASE + 0x6400U) /* When in secure mode (SRAM2B_BASE + 0x6400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_26 (SRAM2B_BASE + 0x6800U) /* When in secure mode (SRAM2B_BASE + 0x6800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_27 (SRAM2B_BASE + 0x6C00U) /* When in secure mode (SRAM2B_BASE + 0x6C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_28 (SRAM2B_BASE + 0x7000U) /* When in secure mode (SRAM2B_BASE + 0x7000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_29 (SRAM2B_BASE + 0x7400U) /* When in secure mode (SRAM2B_BASE + 0x7400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_30 (SRAM2B_BASE + 0x7800U) /* When in secure mode (SRAM2B_BASE + 0x7800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_START_SECURE_ADDR_31 (SRAM2B_BASE + 0x7C00U) /* When in secure mode (SRAM2B_BASE + 0x7C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#define SRAM2B_FULL_UNSECURE (SRAM2B_BASE + 0x8000U) /* The RAM2B is accessible to M0 Plus and M4 */ /** * @} @@ -707,7 +707,7 @@ typedef struct * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected * @retval The new state of FLASH_FLAG (SET or RESET). */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) != 0U) ? \ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_ECCR_ERRORS)) != 0U) ? \ (READ_BIT(FLASH->ECCR, (__FLAG__)) == (__FLAG__)) : \ (READ_BIT(FLASH->SR, (__FLAG__)) == (__FLAG__))) /** @@ -727,11 +727,13 @@ typedef struct * @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag * @arg @ref FLASH_FLAG_ECCC FLASH one ECC error has been detected and corrected * @arg @ref FLASH_FLAG_ECCD FLASH two ECC errors have been detected + * @arg @ref FLASH_FLAG_SR_ERRORS FLASH All SR errors flags + * @arg @ref FLASH_FLAG_ECCR_ERRORS FLASH All ECCR errors flags * @arg @ref FLASH_FLAG_ALL_ERRORS FLASH All errors flags * @retval None */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD))); }\ - if(((__FLAG__) & ~(FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCC | FLASH_FLAG_ECCD))); }\ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_ECCR_ERRORS)) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & (FLASH_FLAG_ECCR_ERRORS))); }\ + if(((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS))); }\ } while(0) /** * @} @@ -808,12 +810,11 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); /** @defgroup FLASH_Private_Constants FLASH Private Constants * @{ */ -#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) #define FLASH_END_ADDR (FLASH_BASE + FLASH_SIZE - 1U) #define FLASH_BANK_SIZE FLASH_SIZE /*!< FLASH Bank Size */ #define FLASH_PAGE_SIZE 0x00001000U /*!< FLASH Page Size, 4 KBytes */ -#define FLASH_PAGE_NB 128U +#define FLASH_PAGE_NB (FLASH_SIZE / FLASH_PAGE_SIZE) #define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ #define FLASH_PCROP_GRANULARITY_OFFSET 11U /*!< FLASH Code Readout Protection granularity offset */ @@ -851,8 +852,7 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); #define IS_ADDR_ALIGNED_64BITS(__VALUE__) (((__VALUE__) & 0x7U) == (0x00UL)) -#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ - ((__VALUE__) == FLASH_TYPEERASE_MASSERASE)) +#define IS_FLASH_TYPEERASE(__VALUE__) ((__VALUE__) == FLASH_TYPEERASE_PAGES) #define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h index 240c0ec..ad6d00f 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h @@ -53,7 +53,9 @@ * */ - /* | AF0 | AF1 | AF2 | AF3 | AF4 | AF5 | AF6 | AF7 | +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB50xx) + + /* | AF0 | AF1 | AF2 | AF3 | AF4 | AF5 | AF6 | AF7 | *_____________________________________________________________________________________________ * |SYS_AF |TIM |TIM |SPI/SAI/TI|I2C | I2C | RF | USART | *_____________________________________________________________________________________________ @@ -353,11 +355,248 @@ /** * @brief AF 15 selection */ - #define GPIO_AF15_EVENTOUT ((uint8_t)0x0f) /*!< EVENTOUT Alternate Function mapping */ #define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0f) +#endif + + +#if defined (STM32WB35xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF0_LSCO ((uint8_t)0x00) /*!< LSCO Alternate Function mapping */ +#define GPIO_AF0_JTMS_SWDIO ((uint8_t)0x00) /*!< JTMS-SWDIO Alternate Function mapping */ +#define GPIO_AF0_JTCK_SWCLK ((uint8_t)0x00) /*!< JTCK-SWCLK Alternate Function mapping */ +#define GPIO_AF0_JTDI ((uint8_t)0x00) /*!< JTDI Alternate Function mapping */ +#define GPIO_AF0_RTC_OUT ((uint8_t)0x00) /*!< RCT_OUT Alternate Function mapping */ +#define GPIO_AF0_JTD_TRACE ((uint8_t)0x00) /*!< JTDO-TRACESWO Alternate Function mapping */ +#define GPIO_AF0_NJTRST ((uint8_t)0x00) /*!< NJTRST Alternate Function mapping */ +#define GPIO_AF0_TRACED0 ((uint8_t)0x00) /*!< TRACED0 Alternate Function mapping */ +#define GPIO_AF0_TRACED1 ((uint8_t)0x00) /*!< TRACED1 Alternate Function mapping */ +#define GPIO_AF0_TRACED2 ((uint8_t)0x00) /*!< TRACED2 Alternate Function mapping */ +#define GPIO_AF0_TRACED3 ((uint8_t)0x00) /*!< TRACED3 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /*!< LPTIM1 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_SPI1 ((uint8_t)0x03) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /*!< SPI2 Alternate Function mapping */ +#define GPIO_AF3_TIM1 ((uint8_t)0x03) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /*!< I2C3 Alternate Function mapping */ +#define GPIO_AF4_SPI1 ((uint8_t)0x04) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_MCO ((uint8_t)0x06) /*!< MCO Alternate Function mapping */ +#define GPIO_AF6_RF_DTB0 ((uint8_t)0x06) /*!< RF_DTB0 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB1 ((uint8_t)0x06) /*!< RF_DTB1 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB2 ((uint8_t)0x06) /*!< RF_DTB2 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB3 ((uint8_t)0x06) /*!< RF_DTB3 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB4 ((uint8_t)0x06) /*!< RF_DTB4 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB5 ((uint8_t)0x06) /*!< RF_DTB5 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB6 ((uint8_t)0x06) /*!< RF_DTB6 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB7 ((uint8_t)0x06) /*!< RF_DTB7 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB8 ((uint8_t)0x06) /*!< RF_DTB8 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB9 ((uint8_t)0x06) /*!< RF_DTB9 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB10 ((uint8_t)0x06) /*!< RF_DTB10 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB11 ((uint8_t)0x06) /*!< RF_DTB11 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB12 ((uint8_t)0x06) /*!< RF_DTB12 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB13 ((uint8_t)0x06) /*!< RF_DTB13 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB14 ((uint8_t)0x06) /*!< RF_DTB14 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB15 ((uint8_t)0x06) /*!< RF_DTB15 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB16 ((uint8_t)0x06) /*!< RF_DTB16 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB17 ((uint8_t)0x06) /*!< RF_DTB17 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB18 ((uint8_t)0x06) /*!< RF_DTB18 Alternate Function mapping */ +#define GPIO_AF6_RF_MISO ((uint8_t)0x06) /*!< RF_MISO Alternate Function mapping */ +#define GPIO_AF6_RF_MOSI ((uint8_t)0x06) /*!< RF_MOSI Alternate Function mapping */ +#define GPIO_AF6_RF_SCK ((uint8_t)0x06) /*!< RF_SCK Alternate Function mapping */ +#define GPIO_AF6_RF_NSS ((uint8_t)0x06) /*!< RF_NSS Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_IR ((uint8_t)0x08) /*!< IR Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ + #define GPIO_AF9_TSC ((uint8_t)0x09) /*!< TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /*!< QUADSPI Alternate Function mapping */ +#define GPIO_AF10_USB ((uint8_t)0x0A) /*!< USB Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /*!< COMP2 Alternate Function mapping */ +#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0F) && ((AF) != (uint8_t)0x0B) && ((AF) != (uint8_t)0x0D)) + +#endif + +#if defined (STM32WB30xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF0_LSCO ((uint8_t)0x00) /*!< LSCO Alternate Function mapping */ +#define GPIO_AF0_JTMS_SWDIO ((uint8_t)0x00) /*!< JTMS-SWDIO Alternate Function mapping */ +#define GPIO_AF0_JTCK_SWCLK ((uint8_t)0x00) /*!< JTCK-SWCLK Alternate Function mapping */ +#define GPIO_AF0_JTDI ((uint8_t)0x00) /*!< JTDI Alternate Function mapping */ +#define GPIO_AF0_RTC_OUT ((uint8_t)0x00) /*!< RCT_OUT Alternate Function mapping */ +#define GPIO_AF0_JTD_TRACE ((uint8_t)0x00) /*!< JTDO-TRACESWO Alternate Function mapping */ +#define GPIO_AF0_NJTRST ((uint8_t)0x00) /*!< NJTRST Alternate Function mapping */ +#define GPIO_AF0_TRACED0 ((uint8_t)0x00) /*!< TRACED0 Alternate Function mapping */ +#define GPIO_AF0_TRACED1 ((uint8_t)0x00) /*!< TRACED1 Alternate Function mapping */ +#define GPIO_AF0_TRACED2 ((uint8_t)0x00) /*!< TRACED2 Alternate Function mapping */ +#define GPIO_AF0_TRACED3 ((uint8_t)0x00) /*!< TRACED3 Alternate Function mapping */ + + /** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /*!< LPTIM1 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM1 ((uint8_t)0x03) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF4_SPI1 ((uint8_t)0x04) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_MCO ((uint8_t)0x06) /*!< MCO Alternate Function mapping */ +#define GPIO_AF6_RF_DTB0 ((uint8_t)0x06) /*!< RF_DTB0 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB1 ((uint8_t)0x06) /*!< RF_DTB1 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB2 ((uint8_t)0x06) /*!< RF_DTB2 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB3 ((uint8_t)0x06) /*!< RF_DTB3 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB4 ((uint8_t)0x06) /*!< RF_DTB4 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB5 ((uint8_t)0x06) /*!< RF_DTB5 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB6 ((uint8_t)0x06) /*!< RF_DTB6 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB7 ((uint8_t)0x06) /*!< RF_DTB7 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB8 ((uint8_t)0x06) /*!< RF_DTB8 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB9 ((uint8_t)0x06) /*!< RF_DTB9 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB10 ((uint8_t)0x06) /*!< RF_DTB10 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB11 ((uint8_t)0x06) /*!< RF_DTB11 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB12 ((uint8_t)0x06) /*!< RF_DTB12 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB13 ((uint8_t)0x06) /*!< RF_DTB13 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB14 ((uint8_t)0x06) /*!< RF_DTB14 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB15 ((uint8_t)0x06) /*!< RF_DTB15 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB16 ((uint8_t)0x06) /*!< RF_DTB16 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB17 ((uint8_t)0x06) /*!< RF_DTB17 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB18 ((uint8_t)0x06) /*!< RF_DTB18 Alternate Function mapping */ +#define GPIO_AF6_RF_MISO ((uint8_t)0x06) /*!< RF_MISO Alternate Function mapping */ +#define GPIO_AF6_RF_MOSI ((uint8_t)0x06) /*!< RF_MOSI Alternate Function mapping */ +#define GPIO_AF6_RF_SCK ((uint8_t)0x06) /*!< RF_SCK Alternate Function mapping */ +#define GPIO_AF6_RF_NSS ((uint8_t)0x06) /*!< RF_NSS Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_IR ((uint8_t)0x08) /*!< IR Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /*!< TSC Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /*!< LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /*!< TIM17 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0F) && ((AF) != (uint8_t)0x0A) && ((AF) != (uint8_t)0x0B) && ((AF) != (uint8_t)0x0D)) + +#endif + /** * @} @@ -375,13 +614,18 @@ /** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index * @{ */ - +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ ((__GPIOx__) == (GPIOB))? 1uL :\ ((__GPIOx__) == (GPIOC))? 2uL :\ ((__GPIOx__) == (GPIOD))? 3uL :\ ((__GPIOx__) == (GPIOE))? 4uL : 7uL) - +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 7uL) +#endif /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h index 94d3011..1ae6f86 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h @@ -55,12 +55,17 @@ extern "C" { /** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus * @{ */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ #define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ #define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ #define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ #define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ #define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#if defined(SYSCFG_CFGR1_I2C3_FMP) #define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#else +#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */ +#endif /** * @} */ @@ -113,6 +118,9 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)) + + + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2s.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2s.h new file mode 100644 index 0000000..b1fcb0a --- /dev/null +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2s.h @@ -0,0 +1,546 @@ +/** + ****************************************************************************** + * @file stm32wbxx_hal_i2s.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WBxx_HAL_I2S_H +#define STM32WBxx_HAL_I2S_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx_hal_def.h" + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32WBxx_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +} I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ + HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ +} HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) +typedef struct __I2S_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ + void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ + void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ + void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ + void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ + void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} I2S_HandleTypeDef; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL I2S Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ + HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ + HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ + HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ + HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ + HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ + HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ + +} HAL_I2S_CallbackIDTypeDef; + +/** + * @brief HAL I2S Callback pointer definition + */ +typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX (0x00000000U) +#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS (0x00000000U) +#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) +#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B (0x00000000U) +#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) +#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K (192000U) +#define I2S_AUDIOFREQ_96K (96000U) +#define I2S_AUDIOFREQ_48K (48000U) +#define I2S_AUDIOFREQ_44K (44100U) +#define I2S_AUDIOFREQ_32K (32000U) +#define I2S_AUDIOFREQ_22K (22050U) +#define I2S_AUDIOFREQ_16K (16000U) +#define I2S_AUDIOFREQ_11K (11025U) +#define I2S_AUDIOFREQ_8K (8000U) +#define I2S_AUDIOFREQ_DEFAULT (2U) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW (0x00000000U) +#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flags_Definition I2S Flags Definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY + +#define I2S_FLAG_MASK (SPI_SR_RXNE\ + | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Enable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Disable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__ specifies the I2S Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + }while(0U) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg_udr = 0x00U;\ + tmpreg_udr = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg_udr); \ + }while(0U) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Macros I2S Private Macros + * @{ + */ + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of I2S SR regsiter. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun error flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_CHSIDE: Channel side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval SET or RESET. + */ +#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ + & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of I2S CR2 regsiter. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if I2S Mode parameter is in allowed range. + * @param __MODE__ specifies the I2S Mode. + * This parameter can be a value of @ref I2S_Mode + * @retval None + */ +#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX)) + +#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ + ((__STANDARD__) == I2S_STANDARD_MSB) || \ + ((__STANDARD__) == I2S_STANDARD_LSB) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) + +#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_32B)) + +#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ + ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) + +#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ + ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ + ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) + +/** @brief Checks if I2S Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the I2S serial clock steady state. + * This parameter can be a value of @ref I2S_Clock_Polarity + * @retval None + */ +#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ + ((__CPOL__) == I2S_CPOL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WBxx_HAL_I2S_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_ipcc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_ipcc.h index 0c6ebae..6088c9e 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_ipcc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_ipcc.h @@ -28,6 +28,7 @@ extern "C" { /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal_def.h" +#if defined(IPCC) /** @addtogroup STM32WBxx_HAL_Driver * @{ @@ -253,6 +254,7 @@ void HAL_IPCC_RxCallback(IPCC_HandleTypeDef *hipcc, uint32_t ChannelIndex, IPCC_ /** * @} */ +#endif /* IPCC */ #ifdef __cplusplus } diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_iwdg.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_iwdg.h index 4dd0579..a206d19 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_iwdg.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_iwdg.h @@ -119,7 +119,7 @@ typedef struct /** * @brief Reload IWDG counter with value defined in the reload register - * (write access to IWDG_PR, IWDG_RLR & IWDG_WINR registers disabled). + * (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled). * @param __HANDLE__ IWDG handle * @retval None */ @@ -219,6 +219,7 @@ HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); */ #define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN) + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lcd.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lcd.h index cae800c..508940a 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lcd.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lcd.h @@ -33,6 +33,8 @@ extern "C" { * @{ */ +#if defined (LCD) + /** @addtogroup LCD * @{ */ @@ -755,6 +757,8 @@ HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd); * @} */ +#endif /* LCD */ + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h index b3f3416..60d9091 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h @@ -42,6 +42,8 @@ extern "C" { /** @defgroup LPTIM_Exported_Types LPTIM Exported Types * @{ */ +#define LPTIM_EXTI_LINE_LPTIM1 EXTI_IMR1_IM29 /*!< External interrupt line 29 Connected to the LPTIM1 EXTI Line */ +#define LPTIM_EXTI_LINE_LPTIM2 EXTI_IMR1_IM30 /*!< External interrupt line 30 Connected to the LPTIM2 EXTI Line */ /** * @brief LPTIM Clock configuration definition @@ -397,6 +399,8 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @note The following sequence is required to solve LPTIM disable HW limitation. * Please check Errata Sheet ES0335 for more details under "MCU may remain * stuck in LPTIM interrupt when entering Stop mode" section. + * @note Please call @ref HAL_LPTIM_GetState() after a call to __HAL_LPTIM_DISABLE to + * check for TIMEOUT. * @retval None */ #define __HAL_LPTIM_DISABLE(__HANDLE__) LPTIM_Disable(__HANDLE__) @@ -433,6 +437,7 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @param __HANDLE__ LPTIM handle * @param __VALUE__ Autoreload value * @retval None + * @note The ARR register can only be modified when the LPTIM instance is enabled. */ #define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__)) @@ -441,6 +446,7 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @param __HANDLE__ LPTIM handle * @param __VALUE__ Compare value * @retval None + * @note The CMP register can only be modified when the LPTIM instance is enabled. */ #define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__)) @@ -489,6 +495,7 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. * @arg LPTIM_IT_CMPM : Compare match Interrupt. * @retval None. + * @note The LPTIM interrupts can only be enabled when the LPTIM instance is disabled. */ #define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) @@ -505,6 +512,7 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @arg LPTIM_IT_ARRM : Autoreload match Interrupt. * @arg LPTIM_IT_CMPM : Compare match Interrupt. * @retval None. + * @note The LPTIM interrupts can only be disabled when the LPTIM instance is disabled. */ #define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) @@ -525,6 +533,56 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin #define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) +/** + * @brief Enable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM1) + +/** + * @brief Disable the LPTIM1 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1)) + + +/** + * @brief Enable the LPTIM1 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= LPTIM_EXTI_LINE_LPTIM1) + +/** + * @brief Disable the LPTIM1 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1)) + +/** + * @brief Enable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM2) + +/** + * @brief Disable the LPTIM2 EXTI line in interrupt mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2)) + + +/** + * @brief Enable the LPTIM2 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= LPTIM_EXTI_LINE_LPTIM2) + +/** + * @brief Disable the LPTIM2 EXTI line in event mode. + * @retval None + */ +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2)) + /** * @} */ @@ -534,6 +592,10 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @{ */ +/** @addtogroup LPTIM_Exported_Functions_Group1 + * @brief Initialization and Configuration functions. + * @{ + */ /* Initialization/de-initialization functions ********************************/ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim); HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); @@ -541,7 +603,14 @@ HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); /* MSP functions *************************************************************/ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim); void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ +/** @addtogroup LPTIM_Exported_Functions_Group2 + * @brief Start-Stop operation functions. + * @{ + */ /* Start/Stop operation functions *********************************************/ /* ################################# PWM Mode ################################*/ /* Blocking mode: Polling */ @@ -590,12 +659,26 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period); HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ +/** @addtogroup LPTIM_Exported_Functions_Group3 + * @brief Read operation functions. + * @{ + */ /* Reading operation functions ************************************************/ uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim); uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim); uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ +/** @addtogroup LPTIM_Exported_Functions_Group4 + * @brief LPTIM IRQ handler and callback functions. + * @{ + */ /* LPTIM IRQ functions *******************************************************/ void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim); @@ -613,9 +696,19 @@ void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim); HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @} + */ +/** @addtogroup LPTIM_Group5 + * @brief Peripheral State functions. + * @{ + */ /* Peripheral State functions ************************************************/ HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); +/** + * @} + */ /** * @} @@ -737,7 +830,7 @@ HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); /** @defgroup LPTIM_Private_Functions LPTIM Private Functions * @{ */ -void LPTIM_Disable(LPTIM_HandleTypeDef *lptim); +void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim); /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h index ea7f10f..c076705 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h @@ -155,7 +155,7 @@ typedef struct /** @defgroup PCD_Speed PCD Speed * @{ */ -#define PCD_SPEED_FULL 2U +#define PCD_SPEED_FULL USBD_FS_SPEED /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pka.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pka.h index a347952..c6dc2d7 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pka.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pka.h @@ -99,7 +99,11 @@ typedef enum * @brief PKA handle Structure definition * @{ */ +#if (USE_HAL_PKA_REGISTER_CALLBACKS == 1) typedef struct __PKA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PKA_REGISTER_CALLBACKS */ { PKA_TypeDef *Instance; /*!< Register base address */ __IO HAL_PKA_StateTypeDef State; /*!< PKA state */ @@ -220,6 +224,7 @@ typedef struct uint8_t *ptY; /*!< Pointer to point P coordinate yP (Array of modulusSize elements) */ } PKA_ECDSASignOutExtParamTypeDef, PKA_ECCMulOutTypeDef; + typedef struct { uint32_t expSize; /*!< Number of element in pExp array */ @@ -229,6 +234,7 @@ typedef struct const uint8_t *pMod; /*!< Pointer to modulus (Array of OpSize elements) */ } PKA_ModExpInTypeDef; + typedef struct { uint32_t expSize; /*!< Number of element in pExp and pMontgomeryParam arrays */ @@ -320,6 +326,7 @@ typedef struct #define PKA_IT_PROCEND PKA_CR_PROCENDIE #define PKA_IT_ADDRERR PKA_CR_ADDRERRIE #define PKA_IT_RAMERR PKA_CR_RAMERRIE + /** * @} */ @@ -330,6 +337,7 @@ typedef struct #define PKA_FLAG_PROCEND PKA_SR_PROCENDF #define PKA_FLAG_ADDRERR PKA_SR_ADDRERRF #define PKA_FLAG_RAMERR PKA_SR_RAMERRF + /** * @} */ @@ -516,6 +524,7 @@ HAL_StatusTypeDef HAL_PKA_MontgomeryParam(PKA_HandleTypeDef *hpka, PKA_Montgomer HAL_StatusTypeDef HAL_PKA_MontgomeryParam_IT(PKA_HandleTypeDef *hpka, PKA_MontgomeryParamInTypeDef *in); void HAL_PKA_MontgomeryParam_GetResult(PKA_HandleTypeDef *hpka, uint32_t *pRes); + HAL_StatusTypeDef HAL_PKA_Abort(PKA_HandleTypeDef *hpka); void HAL_PKA_RAMReset(PKA_HandleTypeDef *hpka); void HAL_PKA_OperationCpltCallback(PKA_HandleTypeDef *hpka); diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h index e60a196..9d6a71a 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h @@ -235,12 +235,22 @@ typedef struct * * @retval The new state of __FLAG__ (TRUE or FALSE). */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1U) ?\ - (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ - ((((((uint8_t)(__FLAG__)) >> 5U) == 2U)) ?\ - (PWR->SR2 & (1U << ((__FLAG__) & 31U))) :\ - (PWR->EXTSCR & (1U << ((__FLAG__) & 31U))) ) ) - +#define __HAL_PWR_GET_FLAG(__FLAG__) ((((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_SR1) ? \ + ( \ + PWR->SR1 & (1UL << ((__FLAG__) & 31UL)) \ + ) \ + : \ + ( \ + (((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_SR2) ? \ + ( \ + PWR->SR2 & (1UL << ((__FLAG__) & 31UL)) \ + ) \ + : \ + ( \ + PWR->EXTSCR & (1UL << ((__FLAG__) & 31UL)) \ + ) \ + ) \ + ) /** @brief Clear a specific PWR flag. * @note Clearing of flags {PWR_FLAG_STOP, PWR_FLAG_SB} @@ -280,12 +290,17 @@ typedef struct * * @retval None */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1U) ?\ - ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ - (PWR->SCR = (__FLAG__)) : (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) :\ - ( (((uint8_t)(__FLAG__)) == PWR_FLAG_CRITICAL_RF_PHASE) ?\ - SET_BIT (PWR->EXTSCR, PWR_EXTSCR_CCRPF) : ( ((((uint8_t)((__FLAG__)) & 31U) <= PWR_EXTSCR_C1STOPF_Pos) ?\ - SET_BIT (PWR->EXTSCR, PWR_EXTSCR_C1CSSF): SET_BIT (PWR->EXTSCR, PWR_EXTSCR_C2CSSF)) ) )) +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ((((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_EXTSCR) ? \ + ( \ + PWR->EXTSCR = (1UL << (((__FLAG__) & PWR_FLAG_EXTSCR_CLR_MASK) >> PWR_FLAG_EXTSCR_CLR_POS)) \ + ) \ + : \ + ( \ + (((__FLAG__)) == PWR_FLAG_WU) ? \ + (PWR->SCR = PWR_SCR_CWUF) : \ + (PWR->SCR = (1UL << ((__FLAG__) & 31UL))) \ + ) \ + ) /** * @brief Enable the PVD Extended Interrupt C1 Line. diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h index 1cee0ea..c082821 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h @@ -61,6 +61,7 @@ typedef struct This parameter can be a value of @ref PWREx_WakeUpTarget_Definition */ }PWR_PVMTypeDef; +#if defined(PWR_CR5_SMPSEN) /** * @brief PWR SMPS step down configuration structure definition */ @@ -72,6 +73,7 @@ typedef struct uint32_t OutputVoltage; /*!< SMPS step down converter output voltage scaling voltage level. This parameter can be a value of @ref PWREx_SMPS_OUTPUT_VOLTAGE_LEVEL */ }PWR_SMPSTypeDef; +#endif /** * @} @@ -96,26 +98,44 @@ typedef struct * @{ */ #define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ +#if defined(PWR_CR3_EWUP2) #define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ +#endif +#if defined(PWR_CR3_EWUP3) #define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ +#endif #define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ +#if defined(PWR_CR3_EWUP5) #define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ +#endif #define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1<CR1, PWR_CR1_VOS); \ UNUSED(tmpreg); \ } while(0) +#endif /** * @brief Wakeup BLE controller from its sleep mode @@ -690,7 +749,7 @@ typedef struct /** @addtogroup PWREx_Private_Macros PWR Extended Private Macros * @{ */ - +#if defined(PWR_CR3_EWUP2) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1_HIGH) || \ ((PIN) == PWR_WAKEUP_PIN2_HIGH) || \ ((PIN) == PWR_WAKEUP_PIN3_HIGH) || \ @@ -701,13 +760,22 @@ typedef struct ((PIN) == PWR_WAKEUP_PIN3_LOW) || \ ((PIN) == PWR_WAKEUP_PIN4_LOW) || \ ((PIN) == PWR_WAKEUP_PIN5_LOW)) +#else +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN1_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN4_LOW)) +#endif #define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) || \ ((POLARITY) == PWR_PIN_POLARITY_LOW)) - +#if defined(PWR_CR2_PVME1) #define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ ((TYPE) == PWR_PVM_3)) +#else +#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_3) +#endif #define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ @@ -720,9 +788,10 @@ typedef struct #define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP)) != 0x00u) && \ (((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP)) == 0x00u)) +#if defined(PWR_CR1_VOS) #define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) - +#endif #define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) @@ -733,13 +802,22 @@ typedef struct #define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00) +#if defined(GPIOD) #define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ ((GPIO) == PWR_GPIO_B) ||\ ((GPIO) == PWR_GPIO_C) ||\ ((GPIO) == PWR_GPIO_D) ||\ ((GPIO) == PWR_GPIO_E) ||\ ((GPIO) == PWR_GPIO_H)) +#else +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_H)) +#endif +#if defined(PWR_CR5_SMPSEN) #define IS_PWR_SMPS_MODE(SMPS_MODE) (((SMPS_MODE) == PWR_SMPS_BYPASS) ||\ ((SMPS_MODE) == PWR_SMPS_STEP_DOWN)) @@ -767,6 +845,7 @@ typedef struct ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V80) ||\ ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V85) ||\ ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V90)) +#endif #define IS_PWR_CORE(CPU) (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2)) @@ -785,7 +864,6 @@ typedef struct * @{ */ - /* Peripheral Control functions **********************************************/ uint32_t HAL_PWREx_GetVoltageRange(void); HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); @@ -799,8 +877,10 @@ void HAL_PWREx_DisableVddUSB(void); void HAL_PWREx_EnableInternalWakeUpLine(void); void HAL_PWREx_DisableInternalWakeUpLine(void); +#if defined(PWR_CR5_SMPSEN) void HAL_PWREx_EnableBORH_SMPSBypassIT(void); void HAL_PWREx_DisableBORH_SMPSBypassIT(void); +#endif void HAL_PWREx_EnableRFPhaseIT(void); void HAL_PWREx_DisableRFPhaseIT(void); void HAL_PWREx_EnableBLEActivityIT(void); @@ -820,8 +900,10 @@ HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumb void HAL_PWREx_EnablePullUpPullDownConfig(void); void HAL_PWREx_DisablePullUpPullDownConfig(void); +#if defined(PWR_CR5_SMPSEN) void HAL_PWREx_SetBORConfig(uint32_t BORConfiguration); uint32_t HAL_PWREx_GetBORConfig(void); +#endif void HAL_PWREx_EnableSRAMRetention(void); void HAL_PWREx_DisableSRAMRetention(void); @@ -829,17 +911,21 @@ void HAL_PWREx_DisableSRAMRetention(void); void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode); void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode); +#if defined(PWR_CR2_PVME1) void HAL_PWREx_EnablePVM1(void); void HAL_PWREx_DisablePVM1(void); +#endif void HAL_PWREx_EnablePVM3(void); void HAL_PWREx_DisablePVM3(void); HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#if defined(PWR_CR5_SMPSEN) HAL_StatusTypeDef HAL_PWREx_ConfigSMPS(PWR_SMPSTypeDef *sConfigSMPS); void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode); uint32_t HAL_PWREx_SMPS_GetEffectiveMode(void); +#endif /* WakeUp pins configuration functions ****************************************/ void HAL_PWREx_EnableWakeUpPin(uint32_t WakeUpPinPolarity, uint32_t wakeupTarget); @@ -857,7 +943,9 @@ void HAL_PWREx_EnterSHUTDOWNMode(void); void HAL_PWREx_PVD_PVM_IRQHandler(void); +#if defined(PWR_CR2_PVME1) void HAL_PWREx_PVM1Callback(void); +#endif void HAL_PWREx_PVM3Callback(void); /** diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_qspi.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_qspi.h index e74bd61..01ef0e0 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_qspi.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_qspi.h @@ -27,7 +27,7 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal_def.h" -#if defined(QUADSPI) || defined(QUADSPI1) || defined(QUADSPI2) +#if defined(QUADSPI) /** @addtogroup STM32WBxx_HAL_Driver * @{ @@ -408,7 +408,7 @@ typedef void (*pQSPI_CallbackTypeDef)(QSPI_HandleTypeDef *hqspi); * @brief QSPI Timeout definition * @{ */ -#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE 5000U /* 5 s */ +#define HAL_QSPI_TIMEOUT_DEFAULT_VALUE 5000U /* 5 s */ /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h index 3abfe25..1643d2f 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h @@ -101,9 +101,16 @@ extern "C" { ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ ((__SOURCE__) == RCC_PLLSOURCE_HSE)) -#define IS_RCC_PLLM_VALUE(__VALUE__) ((__VALUE__) <= RCC_PLLM_DIV8) +#define IS_RCC_PLLM_VALUE(__VALUE__) (((__VALUE__) == RCC_PLLM_DIV1) || \ + ((__VALUE__) == RCC_PLLM_DIV2) || \ + ((__VALUE__) == RCC_PLLM_DIV3) || \ + ((__VALUE__) == RCC_PLLM_DIV4) || \ + ((__VALUE__) == RCC_PLLM_DIV5) || \ + ((__VALUE__) == RCC_PLLM_DIV6) || \ + ((__VALUE__) == RCC_PLLM_DIV7) || \ + ((__VALUE__) == RCC_PLLM_DIV8)) -#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#define IS_RCC_PLLN_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) #define IS_RCC_PLLP_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) @@ -111,12 +118,12 @@ extern "C" { #define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) +#if defined(SAI1) #define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_ADCCLK) == RCC_PLLSAI1_ADCCLK) || \ - (((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ - (((__VALUE__) & RCC_PLLSAI1_USBCLK) == RCC_PLLSAI1_USBCLK) || \ - (((__VALUE__) & RCC_PLLSAI1_RNGCLK) == RCC_PLLSAI1_RNGCLK)) && \ - (((__VALUE__) & ~(RCC_PLLSAI1_ADCCLK|RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_USBCLK|RCC_PLLSAI1_RNGCLK)) == 0U)) - + (((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_USBCLK) == RCC_PLLSAI1_USBCLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI1_ADCCLK | RCC_PLLSAI1_SAI1CLK | RCC_PLLSAI1_USBCLK)) == 0U)) +#endif #define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ ((__RANGE__) == RCC_MSIRANGE_1) || \ ((__RANGE__) == RCC_MSIRANGE_2) || \ @@ -157,7 +164,14 @@ extern "C" { ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) -#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO1) || ((__MCOX__) == RCC_MCO2) || ((__MCOX__) == RCC_MCO3) ) +#if defined(RCC_MCO3_SUPPORT) +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1) || \ + ((__MCOX__) == RCC_MCO2) || \ + ((__MCOX__) == RCC_MCO3)) +#else +#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO1) || \ + ((__MCOX__) == RCC_MCO2)) +#endif #define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ @@ -204,7 +218,7 @@ extern "C" { typedef struct { uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ + This parameter must be a value of @ref RCC_PLL_Config */ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. This parameter must be a value of @ref RCC_PLL_Clock_Source */ @@ -213,7 +227,7 @@ typedef struct This parameter must be a value of @ref RCC_PLLM_Clock_Divider */ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + This parameter must be a number between Min_Data = 6 and Max_Data = 127 */ uint32_t PLLP; /*!< PLLP: Division factor for SAI & ADC clock. This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ @@ -233,7 +247,7 @@ typedef struct typedef struct { uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ + This parameter can be a combination of @ref RCC_Oscillator_Type */ uint32_t HSEState; /*!< The new state of the HSE. This parameter can be a value of @ref RCC_HSE_Config */ @@ -269,7 +283,7 @@ typedef struct } RCC_OscInitTypeDef; /** - * @brief RCC System, AHB and APB busses clock configuration structure definition + * @brief RCC System, AHB and APB buses clock configuration structure definition */ typedef struct { @@ -499,22 +513,28 @@ typedef struct #define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */ #define RCC_PLL_USBCLK RCC_PLLCFGR_PLLQEN /*!< PLLUSBCLK selection from main PLL */ #define RCC_PLL_RNGCLK RCC_PLLCFGR_PLLQEN /*!< PLLRNGCLK selection from main PLL */ +#if defined(SAI1) #define RCC_PLL_SAI1CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI1CLK selection from main PLL */ +#endif #define RCC_PLL_ADCCLK RCC_PLLCFGR_PLLPEN /*!< PLLADCCLK selection from main PLL */ +#if defined(SPI_I2S_SUPPORT) +#define RCC_PLL_I2SCLK RCC_PLLCFGR_PLLPEN /*!< PLLI2SCLK selection from main PLL */ +#endif /** * @} */ +#if defined(SAI1) /** @defgroup RCC_PLLSAI1_Clock_Output PLLSAI1 Clock Output * @{ */ #define RCC_PLLSAI1_ADCCLK RCC_PLLSAI1CFGR_PLLREN /*!< PLLADCCLK selection from PLLSAI1 */ #define RCC_PLLSAI1_USBCLK RCC_PLLSAI1CFGR_PLLQEN /*!< USBCLK selection from PLLSAI1 */ -#define RCC_PLLSAI1_RNGCLK RCC_PLLSAI1CFGR_PLLQEN /*!< RNGCLK selection from PLLSAI1 */ #define RCC_PLLSAI1_SAI1CLK RCC_PLLSAI1CFGR_PLLPEN /*!< PLLSAI1CLK selection from PLLSAI1 */ /** * @} */ +#endif /** @defgroup RCC_MSI_Clock_Range MSI Clock Range * @{ @@ -619,7 +639,9 @@ typedef struct */ #define RCC_MCO1 0x00000000U /*!< MCO1 index */ #define RCC_MCO2 0x00000001U /*!< MCO2 index */ +#if defined(RCC_MCO3_SUPPORT) #define RCC_MCO3 0x00000002U /*!< MCO3 index */ +#endif #define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 1 MCO*/ /** @@ -693,7 +715,9 @@ typedef struct #define RCC_IT_HSIRDY LL_RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ #define RCC_IT_HSERDY LL_RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ #define RCC_IT_PLLRDY LL_RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(SAI1) #define RCC_IT_PLLSAI1RDY LL_RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif #define RCC_IT_HSECSS LL_RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ #define RCC_IT_LSECSS LL_RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ #define RCC_IT_HSI48RDY LL_RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ @@ -717,7 +741,9 @@ typedef struct #define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ #define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ #define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ +#if defined(SAI1) #define RCC_FLAG_PLLSAI1RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI1RDY_Pos) /*!< PLLSAI1 Ready flag */ +#endif /* Flags in the BDCR register */ #define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ @@ -780,13 +806,17 @@ typedef struct */ #define __HAL_RCC_DMA1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_CRC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_DMA1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_CRC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_TSC) @@ -806,22 +836,31 @@ typedef struct #define __HAL_RCC_GPIOA_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC) + +#if defined(GPIOD) #define __HAL_RCC_GPIOD_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_AES1) - +#endif #define __HAL_RCC_GPIOA_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_ADC) + +#if defined(AES1) #define __HAL_RCC_AES1_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_AES1) +#endif /** * @} @@ -835,7 +874,9 @@ typedef struct * @{ */ +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_RNG) @@ -843,7 +884,9 @@ typedef struct #define __HAL_RCC_IPCC_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_IPCC) #define __HAL_RCC_FLASH_CLK_ENABLE() LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FLASH) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_CLK_DISABLE() LL_AHB3_GRP1_DisableClock(LL_AHB3_GRP1_PERIPH_RNG) @@ -866,29 +909,52 @@ typedef struct #define __HAL_RCC_RTCAPB_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_WWDG_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_WWDG) #define __HAL_RCC_TIM2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_LPTIM2_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_CLK_ENABLE() LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_RTCAPB_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_TIM2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_LPTIM2_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_CLK_DISABLE() LL_APB1_GRP2_DisableClock(LL_APB1_GRP2_PERIPH_LPUART1) - +#endif /** * @} @@ -907,14 +973,18 @@ typedef struct #define __HAL_RCC_USART1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_TIM1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif /** * @} @@ -929,13 +999,17 @@ typedef struct */ #define __HAL_RCC_DMA1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_CRC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_DMA1_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA1)) +#if defined(DMA2) #define __HAL_RCC_DMA2_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA2)) +#endif #define __HAL_RCC_DMAMUX1_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMAMUX1)) #define __HAL_RCC_CRC_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC)) #define __HAL_RCC_TSC_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_TSC)) @@ -955,22 +1029,28 @@ typedef struct #define __HAL_RCC_GPIOA_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_GPIOA_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOA)) #define __HAL_RCC_GPIOB_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOB)) #define __HAL_RCC_GPIOC_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOC)) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOD)) +#endif #define __HAL_RCC_GPIOE_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE)) #define __HAL_RCC_GPIOH_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH)) #define __HAL_RCC_ADC_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC)) +#if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1)) - - +#endif /** * @} @@ -984,7 +1064,9 @@ typedef struct * @{ */ +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_RNG) @@ -992,7 +1074,9 @@ typedef struct #define __HAL_RCC_IPCC_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_IPCC) #define __HAL_RCC_FLASH_IS_CLK_ENABLED() LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_FLASH) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_QUADSPI)) +#endif #define __HAL_RCC_PKA_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_PKA)) #define __HAL_RCC_AES2_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_AES2)) #define __HAL_RCC_RNG_IS_CLK_DISABLED() !(LL_AHB3_GRP1_IsEnabledClock(LL_AHB3_GRP1_PERIPH_RNG)) @@ -1015,30 +1099,54 @@ typedef struct #define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_WWDG_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_WWDG) #define __HAL_RCC_TIM2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_IS_CLK_ENABLED() LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_RTCAPB)) #define __HAL_RCC_WWDG_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_WWDG)) #define __HAL_RCC_TIM2_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_TIM2)) +#if defined(LCD) #define __HAL_RCC_LCD_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LCD)) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI2)) +#endif #define __HAL_RCC_I2C1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1)) +#if defined(I2C3) #define __HAL_RCC_I2C3_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C3)) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_CRS)) +#endif +#if defined(USB) #define __HAL_RCC_USB_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USB)) +#endif #define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPTIM1)) #define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() !(LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPTIM2)) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_IS_CLK_DISABLED() !(LL_APB1_GRP2_IsEnabledClock(LL_APB1_GRP2_PERIPH_LPUART1)) +#endif /** * @} @@ -1057,7 +1165,9 @@ typedef struct #define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_TIM1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1)) @@ -1065,7 +1175,9 @@ typedef struct #define __HAL_RCC_USART1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1)) #define __HAL_RCC_TIM16_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM16)) #define __HAL_RCC_TIM17_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM17)) +#if defined(SAI1) #define __HAL_RCC_SAI1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SAI1)) +#endif /** * @} @@ -1080,14 +1192,18 @@ typedef struct */ #define __HAL_RCC_C2DMA1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_C2DMAMUX1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_C2SRAM1_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_C2CRC_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_C2TSC_CLK_ENABLE() LL_C2_AHB1_GRP1_EnableClock(LL_C2_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_C2DMA1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_C2DMAMUX1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_C2SRAM1_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_C2CRC_CLK_DISABLE() LL_C2_AHB1_GRP1_DisableClock(LL_C2_AHB1_GRP1_PERIPH_CRC) @@ -1108,20 +1224,28 @@ typedef struct #define __HAL_RCC_C2GPIOA_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_C2GPIOB_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_C2GPIOC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_C2GPIOE_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_C2ADC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_C2AES1_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_C2GPIOA_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_C2GPIOB_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_C2GPIOC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_C2GPIOE_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_C2ADC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_C2AES1_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /** * @} @@ -1163,29 +1287,53 @@ typedef struct #define __HAL_RCC_C2RTCAPB_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_C2TIM2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_C2LCD_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_C2SPI2_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_C2I2C1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_C2LPTIM1_CLK_ENABLE() LL_C2_APB1_GRP1_EnableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_C2LPTIM2_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_CLK_ENABLE() LL_C2_APB1_GRP2_EnableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_C2RTCAPB_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_C2TIM2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_C2LCD_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_C2SPI2_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_C2I2C1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_C2LPTIM1_CLK_DISABLE() LL_C2_APB1_GRP1_DisableClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_C2LPTIM2_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_CLK_DISABLE() LL_C2_APB1_GRP2_DisableClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif /** * @} @@ -1204,14 +1352,18 @@ typedef struct #define __HAL_RCC_C2USART1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_C2TIM16_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_C2TIM17_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_C2TIM1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_C2TIM16_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_C2TIM17_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /** * @} @@ -1245,14 +1397,18 @@ typedef struct */ #define __HAL_RCC_C2DMA1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_C2DMAMUX1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_C2SRAM1_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_C2CRC_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_C2TSC_IS_CLK_ENABLED() LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_C2DMA1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA1)) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMA2)) +#endif #define __HAL_RCC_C2DMAMUX1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1)) #define __HAL_RCC_C2SRAM1_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_SRAM1)) #define __HAL_RCC_C2CRC_IS_CLK_DISABLED() !(LL_C2_AHB1_GRP1_IsEnabledClock(LL_C2_AHB1_GRP1_PERIPH_CRC)) @@ -1273,20 +1429,28 @@ typedef struct #define __HAL_RCC_C2GPIOA_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_C2GPIOB_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_C2GPIOC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_C2GPIOE_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_C2ADC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_C2GPIOA_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOA)) #define __HAL_RCC_C2GPIOB_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOB)) #define __HAL_RCC_C2GPIOC_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOC)) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOD)) +#endif #define __HAL_RCC_C2GPIOE_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE)) #define __HAL_RCC_C2GPIOH_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)) #define __HAL_RCC_C2ADC_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC)) +#if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1)) +#endif /** * @} @@ -1328,29 +1492,53 @@ typedef struct #define __HAL_RCC_C2RTCAPB_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_C2TIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_C2LCD_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_C2SPI2_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_C2I2C1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_C2LPTIM1_IS_CLK_ENABLED() LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_C2LPTIM2_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_IS_CLK_ENABLED() LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_C2RTCAPB_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_RTCAPB)) #define __HAL_RCC_C2TIM2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_TIM2)) +#if defined(LCD) #define __HAL_RCC_C2LCD_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LCD)) +#endif +#if defined(SPI2) #define __HAL_RCC_C2SPI2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_SPI2)) +#endif #define __HAL_RCC_C2I2C1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C1)) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_I2C3)) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_CRS)) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_USB)) +#endif #define __HAL_RCC_C2LPTIM1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP1_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)) #define __HAL_RCC_C2LPTIM2_IS_CLK_DISABLED() !(LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP2_PERIPH_LPTIM2)) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_IS_CLK_DISABLED() !(LL_C2_APB1_GRP2_IsEnabledClock(LL_C2_APB1_GRP1_PERIPH_LPTIM1)) +#endif /** * @} @@ -1369,14 +1557,18 @@ typedef struct #define __HAL_RCC_C2USART1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_C2TIM16_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_C2TIM17_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1)) #define __HAL_RCC_C2SPI1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1)) #define __HAL_RCC_C2USART1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1)) #define __HAL_RCC_C2TIM16_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM16)) #define __HAL_RCC_C2TIM17_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM17)) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SAI1)) +#endif /** * @} @@ -1408,7 +1600,9 @@ typedef struct */ #define __HAL_RCC_AHB1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_ALL) #define __HAL_RCC_DMA1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_CRC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_TSC) @@ -1416,7 +1610,9 @@ typedef struct #define __HAL_RCC_AHB1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_ALL) #define __HAL_RCC_DMA1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_CRC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_TSC) @@ -1434,21 +1630,29 @@ typedef struct #define __HAL_RCC_GPIOA_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_AHB2_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ALL) #define __HAL_RCC_GPIOA_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_AES1) +#endif /** * @} @@ -1459,7 +1663,9 @@ typedef struct * @{ */ #define __HAL_RCC_AHB3_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ALL) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_RNG) @@ -1468,7 +1674,9 @@ typedef struct #define __HAL_RCC_FLASH_FORCE_RESET() LL_AHB3_GRP1_ForceReset(LL_AHB3_GRP1_PERIPH_FLASH) #define __HAL_RCC_AHB3_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ALL) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_RELEASE_RESET() LL_AHB3_GRP1_ReleaseReset(LL_AHB3_GRP1_PERIPH_RNG) @@ -1486,16 +1694,28 @@ typedef struct #define __HAL_RCC_APB1L_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_ALL) #define __HAL_RCC_TIM2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_APB1H_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_ALL) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_LPTIM2_FORCE_RESET() LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPTIM2) #define __HAL_RCC_APB1_FORCE_RESET() do { \ @@ -1505,16 +1725,28 @@ typedef struct #define __HAL_RCC_APB1L_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_ALL) #define __HAL_RCC_TIM2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LCD) +#endif +#if defined(SPI2) #define __HAL_RCC_SPI2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1) #define __HAL_RCC_APB1H_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_ALL) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_LPTIM2_RELEASE_RESET() LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPTIM2) #define __HAL_RCC_APB1_RELEASE_RESET() do { \ @@ -1535,7 +1767,9 @@ typedef struct #define __HAL_RCC_USART1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_APB2_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ALL) #define __HAL_RCC_TIM1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1) @@ -1543,7 +1777,9 @@ typedef struct #define __HAL_RCC_USART1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SAI1) +#endif /** * @} */ @@ -1571,28 +1807,36 @@ typedef struct * @{ */ #define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() LL_AHB1_GRP1_EnableClockSleep(LL_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() LL_AHB1_GRP1_DisableClockSleep(LL_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_C2DMA1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_C2DMAMUX1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_C2SRAM1_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_SRAM1) #define __HAL_RCC_C2CRC_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_CRC) #define __HAL_RCC_C2TSC_CLK_SLEEP_ENABLE() LL_C2_AHB1_GRP1_EnableClockSleep(LL_C2_AHB1_GRP1_PERIPH_TSC) #define __HAL_RCC_C2DMA1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA1) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMA2) +#endif #define __HAL_RCC_C2DMAMUX1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_DMAMUX1) #define __HAL_RCC_C2SRAM1_CLK_SLEEP_DISABLE() LL_C2_AHB1_GRP1_DisableClockSleep(LL_C2_AHB1_GRP1_PERIPH_SRAM1) @@ -1614,38 +1858,54 @@ typedef struct #define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_AES1_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_C2GPIOA_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_C2GPIOB_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_C2GPIOC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_C2GPIOE_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_C2ADC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_C2AES1_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif #define __HAL_RCC_C2GPIOA_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOA) #define __HAL_RCC_C2GPIOB_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOB) #define __HAL_RCC_C2GPIOC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOC) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOD) +#endif #define __HAL_RCC_C2GPIOE_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) #define __HAL_RCC_C2ADC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#if defined(AES1) #define __HAL_RCC_C2AES1_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) +#endif /** * @} @@ -1659,14 +1919,18 @@ typedef struct * @note By default, all peripheral clocks are enabled during SLEEP mode. * @{ */ +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_RNG) #define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_SRAM2) #define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() LL_AHB3_GRP1_EnableClockSleep(LL_AHB3_GRP1_PERIPH_FLASH) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_QUADSPI) +#endif #define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_PKA) #define __HAL_RCC_AES2_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_AES2) #define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() LL_AHB3_GRP1_DisableClockSleep(LL_AHB3_GRP1_PERIPH_RNG) @@ -1698,53 +1962,101 @@ typedef struct * @{ */ #define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_LCD) +#endif #define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_WWDG) +#if defined(SPI2) #define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() LL_APB1_GRP1_EnableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() LL_APB1_GRP2_EnableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2) #define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_LCD) +#endif #define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_RTCAPB) #define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_WWDG) +#if defined(SPI2) #define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_USB_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() LL_APB1_GRP1_DisableClockSleep(LL_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() LL_APB1_GRP2_DisableClockSleep(LL_APB1_GRP2_PERIPH_LPTIM2) #define __HAL_RCC_C2TIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_C2LCD_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif #define __HAL_RCC_C2RTCAPB_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#if defined(SPI2) #define __HAL_RCC_C2SPI2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_C2I2C1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_C2LPTIM1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP1_EnableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_C2LPTIM2_CLK_SLEEP_ENABLE() LL_C2_APB1_GRP2_EnableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2) #define __HAL_RCC_C2TIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_TIM2) +#if defined(LCD) #define __HAL_RCC_C2LCD_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_LCD) +#endif #define __HAL_RCC_C2RTCAPB_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_RTCAPB) +#if defined(SPI2) #define __HAL_RCC_C2SPI2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_SPI2) +#endif #define __HAL_RCC_C2I2C1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C1) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_I2C3) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_CRS) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_USB) +#endif #define __HAL_RCC_C2LPTIM1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP1_DisableClockSleep(LL_C2_APB1_GRP1_PERIPH_LPTIM1) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPUART1) +#endif #define __HAL_RCC_C2LPTIM2_CLK_SLEEP_DISABLE() LL_C2_APB1_GRP2_DisableClockSleep(LL_C2_APB1_GRP2_PERIPH_LPTIM2) /** @@ -1764,28 +2076,36 @@ typedef struct #define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_C2TIM1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_C2TIM16_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_C2TIM17_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif #define __HAL_RCC_C2TIM1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) #define __HAL_RCC_C2TIM16_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM16) #define __HAL_RCC_C2TIM17_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM17) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SAI1) +#endif /** * @} */ @@ -1799,28 +2119,36 @@ typedef struct * @{ */ #define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) != RESET) +#if defined(DMA2) #define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) != RESET) +#endif #define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) != RESET) #define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) != RESET) #define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) != RESET) #define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != RESET) #define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == RESET) +#if defined(DMA2) #define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == RESET) +#endif #define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) == RESET) #define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) == RESET) #define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) == RESET) #define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) == RESET) #define __HAL_RCC_C2DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA1SMEN) != RESET) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA2SMEN) != RESET) +#endif #define __HAL_RCC_C2DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMAMUX1SMEN) != RESET) #define __HAL_RCC_C2SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_SRAM1SMEN) != RESET) #define __HAL_RCC_C2CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_CRCSMEN) != RESET) #define __HAL_RCC_C2TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_TSCSMEN) != RESET) #define __HAL_RCC_C2DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA1SMEN) == RESET) +#if defined(DMA2) #define __HAL_RCC_C2DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMA2SMEN) == RESET) +#endif #define __HAL_RCC_C2DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_DMAMUX1SMEN) == RESET) #define __HAL_RCC_C2SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_SRAM1SMEN) == RESET) #define __HAL_RCC_C2CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB1SMENR, RCC_C2AHB1SMENR_CRCSMEN) == RESET) @@ -1840,38 +2168,54 @@ typedef struct #define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) != RESET) #define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) != RESET) #define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != RESET) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != RESET) +#endif #define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != RESET) #define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != RESET) #define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != RESET) +#if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) != RESET) +#endif #define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == RESET) #define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == RESET) #define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == RESET) +#if defined(GPIOD) #define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == RESET) +#endif #define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == RESET) #define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == RESET) #define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == RESET) +#if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) == RESET) +#endif #define __HAL_RCC_C2GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOASMEN) != RESET) #define __HAL_RCC_C2GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOBSMEN) != RESET) #define __HAL_RCC_C2GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOCSMEN) != RESET) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIODSMEN) != RESET) +#endif #define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) != RESET) #define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) != RESET) #define __HAL_RCC_C2ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) != RESET) +#if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) != RESET) +#endif #define __HAL_RCC_C2GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOASMEN) == RESET) #define __HAL_RCC_C2GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOBSMEN) == RESET) #define __HAL_RCC_C2GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOCSMEN) == RESET) +#if defined(GPIOD) #define __HAL_RCC_C2GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIODSMEN) == RESET) +#endif #define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) == RESET) #define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) == RESET) #define __HAL_RCC_C2ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) == RESET) +#if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) == RESET) +#endif /** * @} */ @@ -1884,14 +2228,18 @@ typedef struct * @note By default, all peripheral clocks are enabled during SLEEP mode. * @{ */ +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QUADSPISMEN) != RESET) +#endif #define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_PKASMEN) != RESET) #define __HAL_RCC_AES2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_AES2SMEN) != RESET) #define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_RNGSMEN) != RESET) #define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_SRAM2SMEN) != RESET) #define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FLASHSMEN) != RESET) +#if defined(QUADSPI) #define __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QUADSPISMEN) == RESET) +#endif #define __HAL_RCC_PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_PKASMEN) == RESET) #define __HAL_RCC_AES2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_AES2SMEN) == RESET) #define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_RNGSMEN) == RESET) @@ -1923,57 +2271,101 @@ typedef struct * @{ */ #define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != RESET) +#if defined(LCD) #define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != RESET) +#endif #define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != RESET) #define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != RESET) +#if defined(SPI2) #define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != RESET) +#endif #define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != RESET) +#if defined(I2C3) #define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != RESET) +#endif #if defined(CRS) #define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != RESET) -#endif /* CRS */ +#endif +#if defined(USB) #define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBSMEN) != RESET) +#endif #define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) != RESET) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) != RESET) +#endif #define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != RESET) #define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == RESET) +#if defined(LCD) #define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == RESET) +#endif #define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == RESET) #define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == RESET) +#if defined(SPI2) #define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == RESET) +#endif #define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == RESET) +#if defined(I2C3) #define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == RESET) +#endif #if defined(CRS) #define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == RESET) -#endif /* CRS */ +#endif +#if defined(USB) #define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBSMEN) == RESET) +#endif #define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) == RESET) +#if defined(LPUART1) #define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) == RESET) +#endif #define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) == RESET) #define __HAL_RCC_C2TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_TIM2SMEN) != RESET) +#if defined(LCD) #define __HAL_RCC_C2LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LCDSMEN) != RESET) +#endif #define __HAL_RCC_C2RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_RTCAPBSMEN) != RESET) +#if defined(SPI2) #define __HAL_RCC_C2SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_SPI2SMEN) != RESET) +#endif #define __HAL_RCC_C2I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C1SMEN) != RESET) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C3SMEN) != RESET) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_CRSSMEN) != RESET) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_USBSMEN) != RESET) +#endif #define __HAL_RCC_C2LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LPTIM1SMEN) != RESET) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPUART1SMEN) != RESET) +#endif #define __HAL_RCC_C2LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPTIM2SMEN) != RESET) #define __HAL_RCC_C2TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_TIM2SMEN) == RESET) +#if defined(LCD) #define __HAL_RCC_C2LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LCDSMEN) == RESET) +#endif #define __HAL_RCC_C2RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_RTCAPBSMEN) == RESET) +#if defined(SPI2) #define __HAL_RCC_C2SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_SPI2SMEN) == RESET) +#endif #define __HAL_RCC_C2I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C1SMEN) == RESET) +#if defined(I2C3) #define __HAL_RCC_C2I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_I2C3SMEN) == RESET) +#endif +#if defined(CRS) #define __HAL_RCC_C2CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_CRSSMEN) == RESET) +#endif +#if defined(USB) #define __HAL_RCC_C2USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_USBSMEN) == RESET) +#endif #define __HAL_RCC_C2LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR1, RCC_C2APB1SMENR1_LPTIM1SMEN) == RESET) +#if defined(LPUART1) #define __HAL_RCC_C2LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPUART1SMEN) == RESET) +#endif #define __HAL_RCC_C2LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB1SMENR2, RCC_C2APB1SMENR2_LPTIM2SMEN) == RESET) /** * @} @@ -1992,28 +2384,36 @@ typedef struct #define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != RESET) #define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != RESET) #define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != RESET) +#if defined(SAI1) #define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != RESET) +#endif #define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == RESET) #define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == RESET) #define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == RESET) #define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == RESET) #define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == RESET) +#if defined(SAI1) #define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == RESET) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) != RESET) #define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) != RESET) #define __HAL_RCC_C2USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) != RESET) #define __HAL_RCC_C2TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM16SMEN) != RESET) #define __HAL_RCC_C2TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM17SMEN) != RESET) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SAI1SMEN) != RESET) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) == RESET) #define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) == RESET) #define __HAL_RCC_C2USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) == RESET) #define __HAL_RCC_C2TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM16SMEN) == RESET) #define __HAL_RCC_C2TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM17SMEN) == RESET) +#if defined(SAI1) #define __HAL_RCC_C2SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SAI1SMEN) == RESET) +#endif /** * @} */ @@ -2090,18 +2490,17 @@ typedef struct /** @brief Macros to enable the Internal High Speed oscillator (HSI). * @note The HSI is stopped by hardware when entering STOP, STANDBY or SHUTDOWN modes. - * It is enabled by hardware ato force the HSI oscillator ON when STOPWUCK=1 + * It is enabled by hardware to force the HSI oscillator ON when STOPWUCK=1 * or HSIASFS = 1 when leaving Stop modes, or in case of failure of the HSE * crystal oscillator and Security System CSS is enabled. * @note After enabling the HSI, the application software should wait on HSIRDY * flag to be set indicating that HSI clock is stable and can be used as * system clock source. - * This parameter can be: ENABLE or DISABLE. * @retval None */ #define __HAL_RCC_HSI_ENABLE() LL_RCC_HSI_Enable() -/** @brief Macros to disable the Internal High Speed oscillator (HSI). +/** @brief Macro to disable the Internal High Speed oscillator (HSI). * @note HSI can not be stopped if it is used as system clock source. In this case, * you have to select another source of the system clock then stop the HSI. * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator @@ -2136,7 +2535,6 @@ typedef struct * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication * speed because of the HSI startup time. * @note The enable of this function has not effect on the HSION bit. - * This parameter can be: ENABLE or DISABLE. * @retval None */ #define __HAL_RCC_HSISTOP_ENABLE() LL_RCC_HSI_EnableInStopMode() @@ -2162,7 +2560,7 @@ typedef struct #define __HAL_RCC_MSI_ENABLE() LL_RCC_MSI_Enable() #define __HAL_RCC_MSI_DISABLE() LL_RCC_MSI_Disable() -/** @brief Macro Adjusts the Internal Multi Speed oscillator (MSI) calibration value. +/** @brief Macro to adjust the Internal Multi Speed oscillator (MSI) calibration value. * @note The calibration is used to compensate for the variations in voltage * and temperature that influence the frequency of the internal MSI RC. * Refer to the Application Note AN3300 for more details on how to @@ -2452,7 +2850,7 @@ typedef struct /** @brief Macro to configure the PLL multiplication factor. * @note This function must be used only when the main PLL is disabled. * @param __PLLM__ specifies the division factor for PLL VCO input clock - * This parameter must be a value of RCC_PLLM_Clock_Divider. + * This parameter must be a value of @ref RCC_PLLM_Clock_Divider. * @note You have to set the PLLM parameter correctly to ensure that the VCO input * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency * of 16 MHz to limit PLL jitter. @@ -2475,15 +2873,15 @@ typedef struct * @note This clock source is common for the main PLL and audio PLL (PLL and PLLSAI1). * * @param __PLLM__ specifies the division factor for PLL VCO input clock. - * This parameter must be a value of RCC_PLLM_Clock_Divider. + * This parameter must be a value of @ref RCC_PLLM_Clock_Divider. * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * frequency ranges from 2.66 to 16 MHz. It is recommended to select a frequency * of 16 MHz to limit PLL jitter. * * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. - * This parameter must be a number between 8 and 86. + * This parameter must be a number between 6 and 127. * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. + * output frequency is between 96 and 344 MHz. * * @param __PLLP__ specifies the division factor for ADC and SAI1 clock. * This parameter must be a value of @ref RCC_PLLP_Clock_Divider. @@ -2496,8 +2894,8 @@ typedef struct * correctly. * * @param __PLLR__ specifies the division factor for the main system clock. - * This parameter must be a value of RCC_PLLR_Clock_Divider - * @note You have to set the PLLR parameter correctly to not exceed 64MHZ. + * This parameter must be a value of @ref RCC_PLLR_Clock_Divider + * @note You have to set the PLLR parameter correctly to not exceed 48 MHZ. * @retval None */ #define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ @@ -2537,6 +2935,7 @@ typedef struct * @arg @ref RCC_PLL_USBCLK This Clock is used to generate the clock for the USB FS (48 MHz) * @arg @ref RCC_PLL_RNGCLK This clock is used to generate the clock for RNG * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 64MHz) + * @arg @ref RCC_PLL_I2SCLK This Clock is used to generate the clock for the I2S * @retval None */ #define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h index 3dd82cb..789a288 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h @@ -48,6 +48,8 @@ extern "C" { /* CRS Flag Error Mask */ #define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) +/* RNG closk selection CLK48 clock mask */ +#define CLK48_MASK 0x10000000U /** * @} */ @@ -57,16 +59,23 @@ extern "C" { /** @addtogroup RCCEx_Private_Macros * @{ */ -#define IS_RCC_LSCO(__LSCOX__) ( ((__LSCOX__) == RCC_LSCO1) || ((__LSCOX__) == RCC_LSCO2) || ((__LSCOX__) == RCC_LSCO3) ) +#if defined(RCC_LSCO3_SUPPORT) +#define IS_RCC_LSCO(__LSCOX__) (((__LSCOX__) == RCC_LSCO1) || \ + ((__LSCOX__) == RCC_LSCO2) || \ + ((__LSCOX__) == RCC_LSCO3)) +#else +#define IS_RCC_LSCO(__LSCOX__) (((__LSCOX__) == RCC_LSCO1) || \ + ((__LSCOX__) == RCC_LSCO2)) +#endif #define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) - +#if defined(LPUART1) && defined(I2C3) && defined(SAI1) && defined(USB) && defined(RCC_SMPS_SUPPORT) #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ - (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ @@ -77,6 +86,32 @@ extern "C" { (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)|| \ (((__SELECTION__) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS)) +#elif defined(LPUART1) && defined(USB) && defined(RCC_SMPS_SUPPORT) && defined(SPI_I2S_SUPPORT) +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)|| \ + (((__SELECTION__) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)) +#else +#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ + ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ + (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ + (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ + (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)) +#endif #define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \ @@ -84,31 +119,33 @@ extern "C" { ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) - +#if defined(LPUART1) #define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) - +#endif #define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \ ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) +#if defined(I2C3) #define IS_RCC_I2C3CLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \ ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \ ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI)) +#endif - -#define IS_RCC_SAI1CLK(__SOURCE__) \ +#if defined(SAI1) +#define IS_RCC_SAI1CLK(__SOURCE__) \ (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ - ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ ((__SOURCE__) == RCC_SAI1CLKSOURCE_HSI) || \ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) - +#endif #define IS_RCC_LPTIM1CLK(__SOURCE__) \ (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ @@ -123,22 +160,46 @@ extern "C" { ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) #define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_RNGCLKSOURCE_CLK48) || \ - ((__SOURCE__) == RCC_RNGCLKSOURCE_LSI) || \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_CLK48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_LSI) || \ ((__SOURCE__) == RCC_RNGCLKSOURCE_LSE)) +#if defined(USB) +#if defined(SAI1) #define IS_RCC_USBCLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#endif +#endif - +#if defined(STM32WB55xx) || defined (STM32WB5Mxx) #define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#elif defined(STM32WB35xx) +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#else +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#endif #define IS_RCC_RFWKPCLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_RFWKPCLKSOURCE_NONE) || \ @@ -146,6 +207,7 @@ extern "C" { ((__SOURCE__) == RCC_RFWKPCLKSOURCE_LSI) || \ ((__SOURCE__) == RCC_RFWKPCLKSOURCE_HSE_DIV1024)) +#if defined(RCC_SMPS_SUPPORT) #define IS_RCC_SMPSCLKDIV(__DIV__) \ (((__DIV__) == RCC_SMPSCLKDIV_RANGE0) || \ ((__DIV__) == RCC_SMPSCLKDIV_RANGE1) || \ @@ -156,17 +218,29 @@ extern "C" { (((__SOURCE__) == RCC_SMPSCLKSOURCE_HSI) || \ ((__SOURCE__) == RCC_SMPSCLKSOURCE_MSI) || \ ((__SOURCE__) == RCC_SMPSCLKSOURCE_HSE)) +#endif + +#if defined(SPI_I2S_SUPPORT) +#define IS_RCC_I2SCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2SCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_I2SCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_I2SCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_I2SCLKSOURCE_PIN)) +#endif -#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#if defined(SAI1) +#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) #define IS_RCC_PLLSAI1P_VALUE(__VALUE__) ((RCC_PLLP_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLP_DIV32)) #define IS_RCC_PLLSAI1Q_VALUE(__VALUE__) ((RCC_PLLQ_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLQ_DIV8)) #define IS_RCC_PLLSAI1R_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8)) +#endif #define IS_RCC_TRIMOSC(__VALUE__) ((__VALUE__) == RCC_OSCILLATORTYPE_LSI2) +#if defined(CRS) #define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) @@ -187,7 +261,7 @@ extern "C" { #define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) - +#endif /** * @} */ @@ -198,6 +272,7 @@ extern "C" { * @{ */ +#if defined(SAI1) /** * @brief PLLSAI1 Clock structure definition */ @@ -205,7 +280,7 @@ typedef struct { uint32_t PLLN; /*!< PLLN: specifies the multiplication factor for PLLSAI1 VCO output clock. - This parameter must be a number between Min_Data=8 and Max_Data=86. */ + This parameter must be a number between Min_Data=6 and Max_Data=127. */ uint32_t PLLP; /*!< PLLP: specifies the division factor for SAI clock. This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ @@ -219,7 +294,7 @@ typedef struct uint32_t PLLSAI1ClockOut; /*!< PLLSAI1ClockOut: specifies PLLSAI1 output clock to be enabled. This parameter must be a value of @ref RCC_PLLSAI1_Clock_Output */ } RCC_PLLSAI1InitTypeDef; - +#endif /** * @brief RCC extended clocks structure definition @@ -229,23 +304,27 @@ typedef struct uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - +#if defined(SAI1) RCC_PLLSAI1InitTypeDef PLLSAI1; /*!< PLLSAI1 structure parameters. This parameter will be used only when PLLSAI1 is selected as Clock Source for SAI, USB/RNG or ADC */ +#endif uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ - +#if defined(LPUART1) uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source. This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ +#endif uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source. This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ +#if defined(I2C3) uint32_t I2c3ClockSelection; /*!< Specifies I2C3 clock source. This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */ +#endif uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source. This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ @@ -253,12 +332,15 @@ typedef struct uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source. This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#if defined(SAI1) uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source. This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ +#endif - +#if defined(USB) uint32_t UsbClockSelection; /*!< Specifies USB clock source (warning: same source for RNG). This parameter can be a value of @ref RCCEx_USB_Clock_Source */ +#endif uint32_t RngClockSelection; /*!< Specifies RNG clock source (warning: same source for USB). This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ @@ -273,15 +355,22 @@ typedef struct uint32_t RFWakeUpClockSelection; /*!< Specifies RF Wake-up clock source. This parameter can be a value of @ref RCCEx_RFWKP_Clock_Source */ +#if defined(RCC_SMPS_SUPPORT) uint32_t SmpsClockSelection; /*!< Specifies SMPS clock source. This parameter can be a value of @ref RCCEx_SMPS_Clock_Source */ uint32_t SmpsDivSelection; /*!< Specifies SMPS clock division factor. This parameter can be a value of @ref RCCEx_SMPS_Clock_Divider */ +#endif +#if defined(SPI_I2S_SUPPORT) + uint32_t I2sClockSelection; /*!< Specifies I2s clock source. + This parameter can be a value of @ref RCCEx_I2s_Clock_Source */ +#endif } RCC_PeriphCLKInitTypeDef; +#if defined(CRS) /** * @brief RCC_CRS Init structure definition */ @@ -329,7 +418,7 @@ typedef struct This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ } RCC_CRSSynchroInfoTypeDef; - +#endif /** * @} @@ -345,7 +434,9 @@ typedef struct */ #define RCC_LSCO1 0x00000000U /*!< LSCO1 index */ #define RCC_LSCO2 0x00000001U /*!< LSCO2 index */ +#if defined(RCC_LSCO3_SUPPORT) #define RCC_LSCO3 0x00000002U /*!< LSCO3 index */ +#endif /** * @} */ @@ -364,25 +455,36 @@ typedef struct * @{ */ #define RCC_PERIPHCLK_USART1 0x00000001U /*!< USART1 Peripheral Clock Selection */ +#if defined(LPUART1) #define RCC_PERIPHCLK_LPUART1 0x00000002U /*!< LPUART1 Peripheral Clock Selection */ +#endif #define RCC_PERIPHCLK_I2C1 0x00000004U /*!< I2C1 Peripheral Clock Selection */ +#if defined(I2C3) #define RCC_PERIPHCLK_I2C3 0x00000008U /*!< I2C3 Peripheral Clock Selection */ +#endif #define RCC_PERIPHCLK_LPTIM1 0x00000010U /*!< LPTIM1 Peripheral Clock Selection */ #define RCC_PERIPHCLK_LPTIM2 0x00000020U /*!< LPTIM2 Peripheral Clock Selection */ +#if defined(SAI1) #define RCC_PERIPHCLK_SAI1 0x00000040U /*!< SAI1 Peripheral Clock Selection */ -#define RCC_PERIPHCLK_USB 0x00000100U /*!< USB Peripheral Clock Selection */ +#endif +#define RCC_PERIPHCLK_CLK48SEL 0x00000100U /*!< 48 MHz clock source selection */ +#if defined(USB) +#define RCC_PERIPHCLK_USB RCC_PERIPHCLK_CLK48SEL /*!< USB Peripheral Clock Selection */ +#endif #define RCC_PERIPHCLK_RNG 0x00000200U /*!< RNG Peripheral Clock Selection */ #define RCC_PERIPHCLK_ADC 0x00000400U /*!< ADC Peripheral Clock Selection */ #define RCC_PERIPHCLK_RTC 0x00000800U /*!< RTC Peripheral Clock Selection */ #define RCC_PERIPHCLK_RFWAKEUP 0x00001000U /*!< RF Wakeup Peripheral Clock Selection */ -#define RCC_PERIPHCLK_SMPS 0x00002000U /*!< SMPSS Peripheral Clock Selection */ +#if defined(RCC_SMPS_SUPPORT) +#define RCC_PERIPHCLK_SMPS 0x00002000U /*!< SMPS Peripheral Clock Selection */ +#endif +#if defined(SPI_I2S_SUPPORT) +#define RCC_PERIPHCLK_I2S 0x00004000U /*!< I2S Peripheral Clock Selection */ +#endif /** * @} */ - - - /** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source * @{ */ @@ -394,7 +496,7 @@ typedef struct * @} */ - +#if defined(LPUART1) /** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source * @{ */ @@ -405,6 +507,7 @@ typedef struct /** * @} */ +#endif /** @defgroup RCCEx_I2C1_Clock_Source I2C1 Clock Source * @{ @@ -416,7 +519,7 @@ typedef struct * @} */ - +#if defined(I2C3) /** @defgroup RCCEx_I2C3_Clock_Source I2C3 Clock Source * @{ */ @@ -426,8 +529,9 @@ typedef struct /** * @} */ +#endif - +#if defined(SAI1) /** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source * @{ */ @@ -438,6 +542,7 @@ typedef struct /** * @} */ +#endif /** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source * @{ @@ -454,9 +559,9 @@ typedef struct * @{ */ #define RCC_LPTIM2CLKSOURCE_PCLK1 LL_RCC_LPTIM2_CLKSOURCE_PCLK1 /*!< APB1 clock selected as LPTIM2 clock */ -#define RCC_LPTIM2CLKSOURCE_LSI LL_RCC_LPTIM2_CLKSOURCE_LSI /*!< LSI clock selected as LPTIM1 clock */ -#define RCC_LPTIM2CLKSOURCE_HSI LL_RCC_LPTIM2_CLKSOURCE_HSI /*!< HSI clock selected as LPTIM1 clock */ -#define RCC_LPTIM2CLKSOURCE_LSE LL_RCC_LPTIM2_CLKSOURCE_LSE /*!< LSE clock selected as LPTIM1 clock */ +#define RCC_LPTIM2CLKSOURCE_LSI LL_RCC_LPTIM2_CLKSOURCE_LSI /*!< LSI clock selected as LPTIM2 clock */ +#define RCC_LPTIM2CLKSOURCE_HSI LL_RCC_LPTIM2_CLKSOURCE_HSI /*!< HSI clock selected as LPTIM2 clock */ +#define RCC_LPTIM2CLKSOURCE_LSE LL_RCC_LPTIM2_CLKSOURCE_LSE /*!< LSE clock selected as LPTIM2 clock */ /** * @} */ @@ -464,32 +569,41 @@ typedef struct /** @defgroup RCCEx_RNG_Clock_Source RNG Clock Source * @{ */ -#define RCC_RNGCLKSOURCE_CLK48 LL_RCC_RNG_CLKSOURCE_CLK48 /*!< CLK48 divided by 3 selected as RNG Clock */ -#define RCC_RNGCLKSOURCE_LSI LL_RCC_RNG_CLKSOURCE_LSI /*!< LSI selected as ADC clock*/ -#define RCC_RNGCLKSOURCE_LSE LL_RCC_RNG_CLKSOURCE_LSE /*!< LSE selected as ADC clock*/ +#define RCC_RNGCLKSOURCE_HSI48 (CLK48_MASK | LL_RCC_CLK48_CLKSOURCE_HSI48) /*!< HSI48 clock divided by 3 selected as RNG clock */ +#define RCC_RNGCLKSOURCE_PLL (CLK48_MASK | LL_RCC_CLK48_CLKSOURCE_PLL) /*!< PLL "Q" clock divided by 3 selected as RNG clock */ +#define RCC_RNGCLKSOURCE_MSI (CLK48_MASK | LL_RCC_CLK48_CLKSOURCE_MSI) /*!< MSI clock divided by 3 selected as RNG clock */ +#define RCC_RNGCLKSOURCE_CLK48 LL_RCC_RNG_CLKSOURCE_CLK48 /*!< CLK48 divided by 3 selected as RNG Clock */ +#define RCC_RNGCLKSOURCE_LSI LL_RCC_RNG_CLKSOURCE_LSI /*!< LSI clock selected as RNG clock */ +#define RCC_RNGCLKSOURCE_LSE LL_RCC_RNG_CLKSOURCE_LSE /*!< LSE clock selected as RNG clock */ /** * @} */ +#if defined(USB) /** @defgroup RCCEx_USB_Clock_Source USB Clock Source * @{ */ - #define RCC_USBCLKSOURCE_HSI48 LL_RCC_USB_CLKSOURCE_HSI48 /*!< HSI48 clock selected as USB clock */ +#if defined(SAI1) #define RCC_USBCLKSOURCE_PLLSAI1 LL_RCC_USB_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 "Q" clock selected as USB clock */ +#endif #define RCC_USBCLKSOURCE_PLL LL_RCC_USB_CLKSOURCE_PLL /*!< PLL "Q" clock selected as USB clock */ #define RCC_USBCLKSOURCE_MSI LL_RCC_USB_CLKSOURCE_MSI /*!< MSI clock selected as USB clock */ - /** * @} */ +#endif /** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source * @{ */ #define RCC_ADCCLKSOURCE_NONE LL_RCC_ADC_CLKSOURCE_NONE /*!< None clock selected as ADC clock */ +#if defined(STM32WB55xx) || defined (STM32WB5Mxx) #define RCC_ADCCLKSOURCE_PLLSAI1 LL_RCC_ADC_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 "R" clock selected as ADC clock */ +#elif defined(STM32WB35xx) +#define RCC_ADCCLKSOURCE_HSI LL_RCC_ADC_CLKSOURCE_HSI /*!< HSI clock selected as ADC clock */ +#endif #define RCC_ADCCLKSOURCE_PLL LL_RCC_ADC_CLKSOURCE_PLL /*!< PLL "P" clock selected as ADC clock */ #define RCC_ADCCLKSOURCE_SYSCLK LL_RCC_ADC_CLKSOURCE_SYSCLK /*!< SYSCLK clock selected as ADC clock */ @@ -522,45 +636,51 @@ typedef struct */ - +#if defined(RCC_SMPS_SUPPORT) /** @defgroup RCCEx_SMPS_Clock_Source SMPS Clock Source * @{ */ - #define RCC_SMPSCLKSOURCE_HSI LL_RCC_SMPS_CLKSOURCE_HSI /*!< HSI selection as smps clock */ #define RCC_SMPSCLKSOURCE_MSI LL_RCC_SMPS_CLKSOURCE_MSI /*!< MSI selection as smps clock */ #define RCC_SMPSCLKSOURCE_HSE LL_RCC_SMPS_CLKSOURCE_HSE /*!< HSE selection as smps clock */ - /** * @} */ - /** @defgroup RCC_System_Clock_Source_Status System Clock Source Status * @{ */ #define RCC_SMPSCLKSOURCE_STATUS_HSI LL_RCC_SMPS_CLKSOURCE_STATUS_HSI /*!< HSI selection as smps clock */ #define RCC_SMPSCLKSOURCE_STATUS_MSI LL_RCC_SMPS_CLKSOURCE_STATUS_MSI /*!< MSI selection as smps clock */ #define RCC_SMPSCLKSOURCE_STATUS_HSE LL_RCC_SMPS_CLKSOURCE_STATUS_HSE /*!< HSE selection as smps clock */ - - /** * @} */ - /** @defgroup RCCEx_SMPS_Clock_Divider SMPS Clock Division Factor * @{ */ - #define RCC_SMPSCLKDIV_RANGE0 LL_RCC_SMPS_DIV_0 /*!< PLLM division factor = 0 */ #define RCC_SMPSCLKDIV_RANGE1 LL_RCC_SMPS_DIV_1 /*!< PLLM division factor = 1 */ #define RCC_SMPSCLKDIV_RANGE2 LL_RCC_SMPS_DIV_2 /*!< PLLM division factor = 2 */ #define RCC_SMPSCLKDIV_RANGE3 LL_RCC_SMPS_DIV_3 /*!< PLLM division factor = 3 */ +/** + * @} + */ +#endif +#if defined(SPI_I2S_SUPPORT) +/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source + * @{ + */ +#define RCC_I2SCLKSOURCE_NONE LL_RCC_I2S_CLKSOURCE_NONE /*!< No clock selected as I2S clock */ +#define RCC_I2SCLKSOURCE_PLL LL_RCC_I2S_CLKSOURCE_PLL /*!< PLL "Q" clock selected as I2S clock source */ +#define RCC_I2SCLKSOURCE_HSI LL_RCC_I2S_CLKSOURCE_HSI /*!< HSI clock selected as I2S clock */ +#define RCC_I2SCLKSOURCE_PIN LL_RCC_I2S_CLKSOURCE_PIN /*!< External clock selected as I2S clock */ /** * @} */ +#endif /** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line * @{ @@ -572,6 +692,7 @@ typedef struct */ +#if defined(CRS) /** @defgroup RCCEx_CRS_Status RCCEx CRS Status * @{ */ @@ -685,6 +806,7 @@ typedef struct /** * @} */ +#endif /** * @} @@ -697,6 +819,7 @@ typedef struct /*================================================================================================================*/ +#if defined(SAI1) /** * @brief Macro to configure the PLLSAI1 clock multiplication and division factors. * @@ -705,9 +828,9 @@ typedef struct * @ref __HAL_RCC_PLL_CONFIG() macro) * * @param __PLLN__ specifies the multiplication factor for PLLSAI1 VCO output clock. - * This parameter must be a number between 4 and 86. + * This parameter must be a number between 6 and 127. * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. + * output frequency is between 96 and 344 MHz. * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLN * * @param __PLLP__ specifies the division factor for SAI clock. @@ -737,9 +860,9 @@ typedef struct * @ref __HAL_RCC_PLL_CONFIG() macro) * * @param __PLLN__ specifies the multiplication factor for PLLSAI1 VCO output clock. - * This parameter must be a number between Min_Data=4 and Max_Data=86. + * This parameter must be a number between Min_Data=6 and Max_Data=127. * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 64 and 344 MHz. + * output frequency is between 96 and 344 MHz. * Use to set PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLN * * @retval None @@ -817,7 +940,6 @@ typedef struct * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve high-quality audio performance on SAI interface * @arg @ref RCC_PLLSAI1_ADCCLK Clock used to clock ADC peripheral * @arg @ref RCC_PLLSAI1_USBCLK This clock is used to generate the clock for the USB Device (48 MHz) - * @arg @ref RCC_PLLSAI1_RNGCLK same as RCC_PLLSAI1_USBCLK * * @retval None */ @@ -832,7 +954,6 @@ typedef struct * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve high-quality audio performance on SAI interface * @arg @ref RCC_PLLSAI1_ADCCLK Clock used to clock ADC peripheral * @arg @ref RCC_PLLSAI1_USBCLK This clock is used to generate the clock for the USB Device (48 MHz) - * @arg @ref RCC_PLLSAI1_RNGCLK same as RCC_PLLSAI1_USBCLK * * @retval None */ @@ -845,7 +966,6 @@ typedef struct * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve high-quality audio performance on SAI interface * @arg @ref RCC_PLLSAI1_ADCCLK Clock used to clock ADC peripheral * @arg @ref RCC_PLLSAI1_USBCLK This clock is used to generate the clock for the USB Device (48 MHz) - * @arg @ref RCC_PLLSAI1_RNGCLK same as RCC_PLLSAI1_USBCLK * @retval SET / RESET */ #define __HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(__PLLSAI1_CLOCKOUT__) READ_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) @@ -876,6 +996,7 @@ typedef struct * @retval None */ #define __HAL_RCC_GET_SAI1_SOURCE() LL_RCC_GetSAIClockSource(LL_RCC_SAI1_CLKSOURCE) +#endif /** @brief Macro to configure the I2C1 clock (I2C1CLK). * @@ -896,6 +1017,7 @@ typedef struct */ #define __HAL_RCC_GET_I2C1_SOURCE() LL_RCC_GetI2CClockSource(LL_RCC_I2C1_CLKSOURCE) +#if defined(I2C3) /** @brief Macro to configure the I2C3 clock (I2C3CLK). * * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source. @@ -914,6 +1036,7 @@ typedef struct * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock */ #define __HAL_RCC_GET_I2C3_SOURCE() LL_RCC_GetI2CClockSource(LL_RCC_I2C3_CLKSOURCE) +#endif /** @brief Macro to configure the USART1 clock (USART1CLK). * @@ -936,6 +1059,7 @@ typedef struct */ #define __HAL_RCC_GET_USART1_SOURCE() LL_RCC_GetUSARTClockSource(LL_RCC_USART1_CLKSOURCE) +#if defined(LPUART1) /** @brief Macro to configure the LPUART clock (LPUARTCLK). * * @param __LPUART_CLKSOURCE__ specifies the LPUART clock source. @@ -956,6 +1080,7 @@ typedef struct * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock */ #define __HAL_RCC_GET_LPUART1_SOURCE() LL_RCC_GetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE) +#endif /** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). * @@ -1006,19 +1131,41 @@ typedef struct * * @param __RNG_CLKSOURCE__ specifies the RNG clock source. * This parameter can be one of the following values: - * @arg @ref RCC_RNGCLKSOURCE_CLK48 CLK48 divided by 3 selected as RNG Clock - * @arg @ref RCC_RNGCLKSOURCE_LSI LSI selected as RNG clock - * @arg @ref RCC_RNGCLKSOURCE_LSE LSE selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_CLK48 CLK48 divided by 3 selected as RNG Clock (default HSI48) + * @arg @ref RCC_RNGCLKSOURCE_LSI LSI clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_LSE LSE clock selected as RNG clock * @retval None */ -#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) LL_RCC_SetRNGClockSource(__RNG_CLKSOURCE__) - -/** @brief Macro to get the RNG clock. * @retval The clock source can be one of the following values: +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + do { \ + if (((__RNG_CLKSOURCE__) == RCC_RNGCLKSOURCE_LSI) \ + || ((__RNG_CLKSOURCE__) == RCC_RNGCLKSOURCE_LSE) \ + || ((__RNG_CLKSOURCE__) == RCC_RNGCLKSOURCE_CLK48)) \ + { \ + LL_RCC_SetRNGClockSource((__RNG_CLKSOURCE__)); \ + } \ + else \ + { \ + uint32_t tmp = (__RNG_CLKSOURCE__) &(~CLK48_MASK); \ + LL_RCC_SetRNGClockSource(RCC_RNGCLKSOURCE_CLK48); \ + LL_RCC_SetCLK48ClockSource(tmp); \ + } \ + } while(0U) + +/** @brief Macro to get the direct RNG clock. + * @note @ref HAL_RCCEx_GetRngCLKSource can also be called to get direct + * of indirect (48 MHz clock source) RNG clock source. + * @retval The RNG clock source can be one of the following values: * @arg @ref RCC_RNGCLKSOURCE_CLK48 CLK48 divided by 3 selected as RNG Clock * @arg @ref RCC_RNGCLKSOURCE_LSI LSI selected as RNG clock * @arg @ref RCC_RNGCLKSOURCE_LSE LSE selected as RNG clock */ #define __HAL_RCC_GET_RNG_SOURCE() LL_RCC_GetRNGClockSource(LL_RCC_RNG_CLKSOURCE) + +#if defined(USB) /** @brief Macro to configure the USB clock (USBCLK). * * @note USB and RNG peripherals share the same 48MHz clock source. @@ -1041,14 +1188,17 @@ typedef struct * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock */ #define __HAL_RCC_GET_USB_SOURCE() LL_RCC_GetUSBClockSource(LL_RCC_USB_CLKSOURCE) +#endif /** @brief Macro to configure the ADC interface clock. * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. * This parameter can be one of the following values: * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock (*) * @arg @ref RCC_ADCCLKSOURCE_PLL PLL Clock selected as ADC clock * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock (*) + * @note (*) Value not defined for all devices * @retval None */ #define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) LL_RCC_SetADCClockSource(__ADC_CLKSOURCE__) @@ -1056,9 +1206,11 @@ typedef struct /** @brief Macro to get the ADC clock source. * @retval The clock source can be one of the following values: * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock - * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock (*) * @arg @ref RCC_ADCCLKSOURCE_PLL PLL Clock selected as ADC clock * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock (*) + * @note (*) Value not defined for all devices */ #define __HAL_RCC_GET_ADC_SOURCE() LL_RCC_GetADCClockSource(LL_RCC_ADC_CLKSOURCE) @@ -1082,6 +1234,7 @@ typedef struct */ #define __HAL_RCC_GET_RFWAKEUP_SOURCE() LL_RCC_GetRFWKPClockSource() +#if defined(RCC_SMPS_SUPPORT) /** @brief Macro to configure the SMPS clock division factor. * * @param __SMPSCLKDIV__ specifies the division factor for SMPS clock. @@ -1134,12 +1287,36 @@ typedef struct * @arg @ref RCC_SMPSCLKSOURCE_STATUS_HSE HSE Clock selected as SMPS clock */ #define __HAL_RCC_GET_SMPS_SOURCE_STATUS() LL_RCC_GetSMPSClockSource() +#endif /** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management * @brief macros to manage the specified RCC Flags and interrupts. * @{ */ +#if defined(SPI_I2S_SUPPORT) +/** @brief Macro to configure the I2S clock (I2SCLK). + * @param __I2S_CLKSOURCE__ specifies the I2S clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2SCLKSOURCE_NONE No clock selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_PLL PLL "Q" selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_HSI HSI selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_PIN External clock selected as I2S clock + * @retval None + */ +#define __HAL_RCC_I2S_CONFIG(__I2S_CLKSOURCE__) LL_RCC_SetI2SClockSource(__I2S_CLKSOURCE__) + +/** @brief Macro to get the I2S clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2SCLKSOURCE_NONE No clock selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_PLL PLL "Q" selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_HSI HSI selected as I2S clock + * @arg @ref RCC_I2SCLKSOURCE_PIN External clock selected as I2S clock + */ +#define __HAL_RCC_GET_I2S_SOURCE() LL_RCC_GetI2SClockSource(LL_RCC_I2S_CLKSOURCE) +#endif + +#if defined(SAI1) /** @brief Enable PLLSAI1RDY interrupt. * @retval None */ @@ -1164,6 +1341,7 @@ typedef struct * @retval TRUE or FALSE. */ #define __HAL_RCC_PLLSAI1_GET_FLAG() LL_RCC_PLLSAI1_IsReady() +#endif /** * @brief Enable the RCC LSE CSS Extended Interrupt C1 Line. @@ -1275,6 +1453,7 @@ typedef struct */ #define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI_0_31(RCC_EXTI_LINE_LSECSS) +#if defined(CRS) /** * @brief Enable the specified CRS interrupts. * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. @@ -1371,12 +1550,13 @@ typedef struct WRITE_REG(CRS->ICR, (__FLAG__)); \ } \ } while(0) - +#endif /** * @} */ +#if defined(CRS) /** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features * @{ */ @@ -1421,6 +1601,7 @@ typedef struct /** * @} */ +#endif /** * @} @@ -1438,6 +1619,7 @@ typedef struct HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); +uint32_t HAL_RCCEx_GetRngCLKSource(void); /** * @} @@ -1447,8 +1629,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); * @{ */ +#if defined(SAI1) HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init); HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void); +#endif void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); @@ -1471,6 +1655,7 @@ HAL_StatusTypeDef HAL_RCCEx_TrimOsc(uint32_t OscillatorType); * @} */ + #if defined(CRS) /** @addtogroup RCCEx_Exported_Functions_Group3 @@ -1491,8 +1676,7 @@ void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); * @} */ -#endif /* CRS */ - +#endif /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rng.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rng.h index dbc0a09..1c170b8 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rng.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rng.h @@ -176,7 +176,9 @@ typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t #define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */ #endif /* USE_HAL_RNG_REGISTER_CALLBACKS */ #define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ - +#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ +#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */ +#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */ /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h index 6989a61..2ac6577 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h @@ -213,9 +213,13 @@ typedef enum HAL_RTC_ALARM_B_EVENT_CB_ID = 0x01U, /*!< RTC Alarm B Event Callback ID */ HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC TimeStamp Event Callback ID */ HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC WakeUp Timer Event Callback ID */ +#if defined(RTC_TAMPER1_SUPPORT) HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */ +#endif HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */ +#if defined(RTC_TAMPER3_SUPPORT) HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06U, /*!< RTC Tamper 3 Callback ID */ +#endif HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ }HAL_RTC_CallbackIDTypeDef; diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h index e078826..fc236d1 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc_ex.h @@ -731,44 +731,18 @@ typedef struct /**************************************************************************************************/ -#if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) - /** * @brief Enable the RTC Tamper interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) - -#elif defined(RTC_TAMPER1_SUPPORT) - -/** - * @brief Enable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt + * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) @@ -778,181 +752,54 @@ typedef struct * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) - -#elif defined(RTC_TAMPER3_SUPPORT) - - -/** - * @brief Enable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. - * This parameter can be any combination of the following values: * @arg RTC_IT_TAMP: All tampers interrupts + * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Tamper interrupt. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) -#endif - /**************************************************************************************************/ -#if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) - /** * @brief Check whether the specified RTC Tamper interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. * This parameter can be: - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt + * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ +#if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != 0U) ? 1U : 0U) : \ ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != 0U) ? 1U : 0U) : \ ((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7U)) != 0U) ? 1U : 0U)) - -#elif defined(RTC_TAMPER1_SUPPORT) - -/** - * @brief Check whether the specified RTC Tamper interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. - * This parameter can be: - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != 0U) ? 1U : 0U) : \ - ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != 0U) ? 1U : 0U)) - -#elif defined(RTC_TAMPER3_SUPPORT) - -/** - * @brief Check whether the specified RTC Tamper interrupt has occurred or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. - * This parameter can be: - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != 0U) ? 1U : 0U) : \ - ((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7U)) != 0U) ? 1U : 0U)) - - +#else +#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != 0U) ? 1U : 0U)) #endif /**************************************************************************************************/ -#if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) - -/** - * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - - -/** - * @brief Get the selected RTC Tamper's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) - -/** - * @brief Clear the RTC Tamper's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -#elif defined(RTC_TAMPER1_SUPPORT) - -/** - * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. - * @param __HANDLE__ specifies the RTC handle. - * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP1: Tamper1 interrupt - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) - - -/** - * @brief Get the selected RTC Tamper's flag status. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) - -/** - * @brief Clear the RTC Tamper's pending flags. - * @param __HANDLE__ specifies the RTC handle. - * @param __FLAG__ specifies the RTC Tamper Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F: Tamper1 flag - * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @retval None - */ -#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -#elif defined(RTC_TAMPER3_SUPPORT) - - /** * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. * This parameter can be: * @arg RTC_IT_TAMP: All tampers interrupts - * @arg RTC_IT_TAMP2: Tamper2 interrupt - * @arg RTC_IT_TAMP3: Tamper3 interrupt + * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) + * @arg RTC_IT_TAMP2: Tamper2 interrupt + * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) @@ -963,8 +810,12 @@ typedef struct * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. * This parameter can be: + * @arg RTC_FLAG_TAMP1F: Tamper1 flag (*) * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag + * @arg RTC_FLAG_TAMP3F: Tamper3 flag (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) @@ -974,14 +825,16 @@ typedef struct * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag to clear. * This parameter can be: + * @arg RTC_FLAG_TAMP1F: Tamper1 flag (*) * @arg RTC_FLAG_TAMP2F: Tamper2 flag - * @arg RTC_FLAG_TAMP3F: Tamper3 flag + * @arg RTC_FLAG_TAMP3F: Tamper3 flag (*) + * + * (*) Value not defined in all devices. \n + * * @retval None */ #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) -#endif - /**************************************************************************************************/ @@ -1332,31 +1185,18 @@ HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t #define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \ RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT)) -#elif defined(RTC_TAMPER1_SUPPORT) +#else -#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP1F| \ +#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | \ RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \ RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \ RTC_FLAG_SHPF | RTC_FLAG_WUTWF |RTC_FLAG_ALRBWF | \ RTC_FLAG_ALRAWF)) -#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E)) -#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \ - RTC_ALL_TAMPER_INTERRUPT)) - -#elif defined(RTC_TAMPER3_SUPPORT) - -#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \ - RTC_FLAG_TSOVF | RTC_FLAG_TSF | \ - RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \ - RTC_FLAG_INITF | RTC_FLAG_RSF | \ - RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \ - RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF)) +#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E)) +#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER2_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT)) -#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E)) -#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER2_INTERRUPT | \ - RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT)) #endif #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT (EXTI_IMR1_IM18) /*!< External interrupt line 18 Connected to the RTC Tamper and Time Stamp events */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai.h index ec68db4..35e5956 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai.h @@ -32,6 +32,8 @@ extern "C" { * @{ */ +#if defined (SAI1) + /** @addtogroup SAI * @{ */ @@ -153,6 +155,7 @@ typedef struct /** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition * @brief SAI Frame Init structure definition + * @note For SPDIF and AC97 protocol, these parameters are not used (set by hardware). * @{ */ typedef struct @@ -185,6 +188,8 @@ typedef struct /** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition * @brief SAI Block Slot Init Structure definition + * @note For SPDIF protocol, these parameters are not used (set by hardware). + * @note For AC97 protocol, only SlotActive parameter is used (the others are set by hardware). * @{ */ typedef struct @@ -948,6 +953,8 @@ uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai); * @} */ +#endif /* SAI1 */ + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai_ex.h index c681616..b55b17c 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_sai_ex.h @@ -32,6 +32,8 @@ extern "C" { * @{ */ +#if defined (SAI1) + /** @addtogroup SAIEx * @{ */ @@ -92,10 +94,11 @@ HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(SAI_HandleTypeDef *hsai, SAIEx_Pdm * @} */ +#endif /* SAI1 */ + /** * @} */ - #ifdef __cplusplus } #endif diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_spi.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_spi.h index 5f14649..7b2a571 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_spi.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_spi.h @@ -383,7 +383,8 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to #define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ #define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ #define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ -#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) /** * @} */ @@ -433,7 +434,7 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to } while(0) #else #define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) -#endif +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ /** @brief Enable the specified SPI interrupts. * @param __HANDLE__ specifies the SPI Handle. @@ -469,7 +470,8 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to * @arg SPI_IT_ERR: Error interrupt enable * @retval The new state of __IT__ (TRUE or FALSE). */ -#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** @brief Check whether the specified SPI flag is set or not. * @param __HANDLE__ specifies the SPI Handle. @@ -529,9 +531,9 @@ typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to */ #define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ do{ \ - __IO uint32_t tmpreg_fre = 0x00U; \ - tmpreg_fre = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg_fre); \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ }while(0U) /** @brief Enable the SPI peripheral. diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h index 0d2aeaa..0016aa6 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h @@ -167,7 +167,7 @@ typedef struct This parameter can be a value of @ref TIM_Encoder_Mode */ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ uint32_t IC1Selection; /*!< Specifies the input. This parameter can be a value of @ref TIM_Input_Capture_Selection */ @@ -179,7 +179,7 @@ typedef struct This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ uint32_t IC2Selection; /*!< Specifies the input. This parameter can be a value of @ref TIM_Input_Capture_Selection */ @@ -235,7 +235,12 @@ typedef struct uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode */ + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ } TIM_MasterConfigTypeDef; /** @@ -518,6 +523,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @} */ +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + /** @defgroup TIM_ClockDivision TIM Clock Division * @{ */ @@ -611,6 +625,15 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @} */ +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + /** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection * @{ */ @@ -1298,6 +1321,31 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to */ #define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + /** * @brief Indicates whether or not the TIM Counter is used as downcounter. * @param __HANDLE__ TIM handle. @@ -1317,6 +1365,8 @@ mode. /** * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. * @param __HANDLE__ TIM handle. * @param __COUNTER__ specifies the Counter register new value. * @retval None @@ -1498,12 +1548,62 @@ mode. * @retval None */ #define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\ - ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\ - ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE)) + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) /** * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. @@ -1576,29 +1676,29 @@ mode. ((__MODE__) == TIM_CLEARINPUTSOURCE_COMP2) || \ ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE)) -#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ - ((__BASE__) == TIM_DMABASE_CR2) || \ - ((__BASE__) == TIM_DMABASE_SMCR) || \ - ((__BASE__) == TIM_DMABASE_DIER) || \ - ((__BASE__) == TIM_DMABASE_SR) || \ - ((__BASE__) == TIM_DMABASE_EGR) || \ - ((__BASE__) == TIM_DMABASE_CCMR1) || \ - ((__BASE__) == TIM_DMABASE_CCMR2) || \ - ((__BASE__) == TIM_DMABASE_CCER) || \ - ((__BASE__) == TIM_DMABASE_CNT) || \ - ((__BASE__) == TIM_DMABASE_PSC) || \ - ((__BASE__) == TIM_DMABASE_ARR) || \ - ((__BASE__) == TIM_DMABASE_RCR) || \ - ((__BASE__) == TIM_DMABASE_CCR1) || \ - ((__BASE__) == TIM_DMABASE_CCR2) || \ - ((__BASE__) == TIM_DMABASE_CCR3) || \ - ((__BASE__) == TIM_DMABASE_CCR4) || \ - ((__BASE__) == TIM_DMABASE_BDTR) || \ - ((__BASE__) == TIM_DMABASE_OR) || \ - ((__BASE__) == TIM_DMABASE_CCMR3) || \ - ((__BASE__) == TIM_DMABASE_CCR5) || \ - ((__BASE__) == TIM_DMABASE_CCR6) || \ - ((__BASE__) == TIM_DMABASE_AF1) || \ +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ ((__BASE__) == TIM_DMABASE_AF2)) #define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) @@ -1609,6 +1709,9 @@ mode. ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENALE)) + #define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) @@ -1631,6 +1734,9 @@ mode. #define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ ((__STATE__) == TIM_OCNIDLESTATE_RESET)) +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + #define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) @@ -1855,10 +1961,10 @@ mode. ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) #define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC)) + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) #define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ @@ -1867,10 +1973,10 @@ mode. ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) #define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) /** * @} diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h index 1903cd1..0c53871 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h @@ -91,24 +91,40 @@ TIMEx_BreakInputConfigTypeDef; #define TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR_ETR_ADC1_RMP_0 /* !< TIM1_ETR is connected to ADC1 AWD1 */ #define TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR_ETR_ADC1_RMP_1 /* !< TIM1_ETR is connected to ADC1 AWD2 */ #define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR_ETR_ADC1_RMP_0 | TIM1_OR_ETR_ADC1_RMP_1) /* !< TIM1_ETR is connected to ADC1 AWD3 */ +#if defined(COMP1) #define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ +#endif /* COMP1 */ +#if defined(COMP2) #define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ +#endif /* COMP2 */ #define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1 Input capture 1 is connected to I/0 */ #define TIM_TIM1_TI1_COMP1 TIM1_OR_TI1_RMP /* !< TIM1 Input capture 1is connected to COMP1 OUT */ #define TIM_TIM2_ITR_NC 0x00000000U /* !< TIM2 Internal trigger ITR is not connected */ +#if defined(USB) #define TIM_TIM2_ITR_USB TIM2_OR_ITR1_RMP /* !< TIM2 Internal trigger ITR is connected to USBFS SOF */ +#endif /* USB */ #define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2 External trigger ETR is connected to I/O */ #define TIM_TIM2_ETR_LSE TIM2_OR_ETR_RMP /* !< TIM2 External trigger ETR is connected to LSE */ +#if defined(COMP1) #define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ +#endif /* COMP1 */ +#if defined(COMP2) #define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ +#endif /* COMP2 */ #define TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2_TI4 is connected to I/O */ +#if defined(COMP1) #define TIM_TIM2_TI4_COMP1 TIM2_OR_TI4_RMP_0 /* !< TIM2_TI4 is connected to COMP1 OUT */ +#endif /* COMP1 */ +#if defined(COMP2) #define TIM_TIM2_TI4_COMP2 TIM2_OR_TI4_RMP_1 /* !< TIM2_TI4 is connected to COMP1 OUT */ +#endif /* COMP2 */ +#if defined(COMP1) && defined(COMP2) #define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR_TI4_RMP_0 | TIM2_OR_TI4_RMP_1) /* !< TIM2_TI4 is connected to COMP1 and COMP2 OUT */ +#endif /* COMP1 && COMP2 */ #define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16_TI1 is connected to I/O */ #define TIM_TIM16_TI1_LSI TIM16_OR_TI1_RMP_0 /* !< TIM16_TI1 is connected to LSI Clock */ @@ -136,8 +152,12 @@ TIMEx_BreakInputConfigTypeDef; * @{ */ #define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ +#if defined(COMP1) #define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ +#endif /* COMP1 */ +#if defined(COMP2) #define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ +#endif /* COMP2 */ /** * @} */ @@ -189,10 +209,15 @@ TIMEx_BreakInputConfigTypeDef; (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) +#if defined(COMP1) && defined(COMP2) #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#else +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ + (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)) +#endif #define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) \ (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h index 6150c7e..1629e91 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h @@ -28,6 +28,8 @@ extern "C" { /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal_def.h" +#if defined(TSC) + /** @addtogroup STM32WBxx_HAL_Driver * @{ */ @@ -106,13 +108,17 @@ typedef struct /** * @brief TSC handle Structure definition */ +#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1) typedef struct __TSC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */ { TSC_TypeDef *Instance; /*!< Register base address */ TSC_InitTypeDef Init; /*!< Initialization parameters */ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */ HAL_LockTypeDef Lock; /*!< Lock feature */ - __IO uint32_t ErrorCode; /*!< I2C Error code */ + __IO uint32_t ErrorCode; /*!< TSC Error code */ #if (USE_HAL_TSC_REGISTER_CALLBACKS == 1) void (* ConvCpltCallback)(struct __TSC_HandleTypeDef *htsc); /*!< TSC Conversion complete callback */ @@ -640,7 +646,8 @@ typedef void (*pTSC_CallbackTypeDef)(TSC_HandleTypeDef *htsc); /*!< pointer to #define IS_TSC_GROUP_INDEX(__VALUE__) (((__VALUE__) == 0UL) || (((__VALUE__) > 0UL) && ((__VALUE__) < (uint32_t)TSC_NB_OF_GROUPS))) -#define IS_TSC_GROUP(__VALUE__) ((((__VALUE__) & TSC_GROUP1_IO1) == TSC_GROUP1_IO1) ||\ +#define IS_TSC_GROUP(__VALUE__) (((__VALUE__) == 0UL) ||\ + (((__VALUE__) & TSC_GROUP1_IO1) == TSC_GROUP1_IO1) ||\ (((__VALUE__) & TSC_GROUP1_IO2) == TSC_GROUP1_IO2) ||\ (((__VALUE__) & TSC_GROUP1_IO3) == TSC_GROUP1_IO3) ||\ (((__VALUE__) & TSC_GROUP1_IO4) == TSC_GROUP1_IO4) ||\ @@ -751,6 +758,7 @@ void HAL_TSC_ErrorCallback(TSC_HandleTypeDef *htsc); /** * @} */ +#endif /* TSC */ #ifdef __cplusplus } diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h index 2e2e2b4..47f158b 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h @@ -48,12 +48,14 @@ typedef struct { uint32_t BaudRate; /*!< This member configures the UART communication baud rate. The baud rate register is computed using the following formula: +#if defined(LPUART1) LPUART: ======= Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) where lpuart_ker_ck_pres is the UART input clock divided by a prescaler UART: ===== +#endif - If oversampling is 16 or in LIN mode, Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) - If oversampling is 8, @@ -104,10 +106,10 @@ typedef struct This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref UART_Tx_Inv. */ + This parameter can be a value of @ref UART_Tx_Inv. */ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref UART_Rx_Inv. */ + This parameter can be a value of @ref UART_Rx_Inv. */ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic vs negative/inverted logic). @@ -133,8 +135,6 @@ typedef struct This parameter can be a value of @ref UART_MSB_First. */ } UART_AdvFeatureInitTypeDef; - - /** * @brief HAL UART State definition * @note HAL UART State value is a combination of 2 different substates: gState and RxState (see @ref UART_State_Definition). @@ -221,9 +221,9 @@ typedef struct __UART_HandleTypeDef uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ - void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ - void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ @@ -331,8 +331,10 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ #define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ #define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */ + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ +#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ /** * @} @@ -422,7 +424,6 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ #define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ #define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ - /** * @} */ @@ -438,11 +439,11 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @} */ -/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout * @{ */ -#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART receiver timeout disable */ -#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART receiver timeout enable */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ /** * @} */ @@ -696,6 +697,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ #define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ #define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ #define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ #define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ #define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ @@ -746,17 +748,10 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ #define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ #define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ -/* Elements values convention: 000000000XXYYYYYb - - YYYYY : Interrupt source position in the XX register (5bits) - - XX : Interrupt source register (2bits) - - 01: CR1 register - - 10: CR2 register - - 11: CR3 register */ #define UART_IT_ERR 0x0060U /*!< UART error interruption */ -/* Elements values convention: 0000ZZZZ00000000b - - ZZZZ : Flag position in the ISR register(4bits) */ #define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ #define UART_IT_NE 0x0200U /*!< UART noise error interruption */ #define UART_IT_FE 0x0100U /*!< UART frame error interruption */ @@ -778,6 +773,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ #define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ #define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ /** * @} */ @@ -816,9 +812,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer */ #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0U) + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) /** @brief Clear the specified UART pending flag. * @param __HANDLE__ specifies the UART Handle. @@ -831,6 +827,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag * @arg @ref UART_CLEAR_CMF Character Match Clear Flag @@ -899,6 +896,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_FLAG_TC Transmission Complete flag * @arg @ref UART_FLAG_RXNE Receive data register not empty flag * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag * @arg @ref UART_FLAG_IDLE Idle Line detection flag * @arg @ref UART_FLAG_ORE Overrun Error flag * @arg @ref UART_FLAG_NE Noise Error flag @@ -925,6 +923,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_TC Transmission complete interrupt * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt * @arg @ref UART_IT_IDLE Idle line detection interrupt * @arg @ref UART_IT_PE Parity Error interrupt * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) @@ -952,6 +951,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_TC Transmission complete interrupt * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt * @arg @ref UART_IT_IDLE Idle line detection interrupt * @arg @ref UART_IT_PE Parity Error interrupt * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) @@ -978,12 +978,14 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_TC Transmission complete interrupt * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt * @arg @ref UART_IT_IDLE Idle line detection interrupt * @arg @ref UART_IT_PE Parity Error interrupt * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) * @retval The new state of __INTERRUPT__ (SET or RESET). */ -#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) /** @brief Check whether the specified UART interrupt source is enabled or not. * @param __HANDLE__ specifies the UART Handle. @@ -1002,14 +1004,15 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_TC Transmission complete interrupt * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt * @arg @ref UART_IT_IDLE Idle line detection interrupt * @arg @ref UART_IT_PE Parity Error interrupt * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) * @retval The new state of __INTERRUPT__ (SET or RESET). */ #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ? (__HANDLE__)->Instance->CR1 : \ - (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET) + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET) /** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. * @param __HANDLE__ specifies the UART Handle. @@ -1021,6 +1024,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag @@ -1165,13 +1169,16 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) +#if defined(LPUART1) /** @brief BRR division operation to set BRR register with LPUART. * @param __PCLK__ LPUART clock. * @param __BAUD__ Baud rate set by the user. * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((uint32_t)(((((uint64_t)(__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__)))*256U) + (uint32_t)((__BAUD__)/2U)) / (__BAUD__))) +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((uint32_t)(((((uint64_t)(__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__)))*256U)\ + + (uint32_t)((__BAUD__)/2U)) / (__BAUD__))) +#endif /** @brief BRR division operation to set BRR register in 8-bit oversampling mode. * @param __PCLK__ UART clock. @@ -1179,7 +1186,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__)))*2U) + ((__BAUD__)/2U)) / (__BAUD__)) +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__)))*2U)\ + + ((__BAUD__)/2U)) / (__BAUD__)) /** @brief BRR division operation to set BRR register in 16-bit oversampling mode. * @param __PCLK__ UART clock. @@ -1187,13 +1195,16 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((((__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__))) + ((__BAUD__)/2U)) / (__BAUD__)) +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((((__PCLK__)/UART_GET_DIV_FACTOR((__CLOCKPRESCALER__)))\ + + ((__BAUD__)/2U)) / (__BAUD__)) +#if defined(LPUART1) /** @brief Check whether or not UART instance is Low Power UART. * @param __HANDLE__ specifies the UART Handle. * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) */ #define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) +#endif /** @brief Check UART Baud rate. * @param __BAUDRATE__ Baudrate specified by the user. @@ -1225,6 +1236,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer ((__STOPBITS__) == UART_STOPBITS_1_5) || \ ((__STOPBITS__) == UART_STOPBITS_2)) +#if defined(LPUART1) /** * @brief Ensure that LPUART frame number of stop bits is valid. * @param __STOPBITS__ LPUART frame number of stop bits. @@ -1232,6 +1244,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer */ #define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ ((__STOPBITS__) == UART_STOPBITS_2)) +#endif /** * @brief Ensure that UART frame parity is valid. @@ -1248,10 +1261,10 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) */ #define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ - (((__CONTROL__) == UART_HWCONTROL_NONE) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS) || \ - ((__CONTROL__) == UART_HWCONTROL_CTS) || \ - ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) /** * @brief Ensure that UART communication mode is valid. @@ -1299,8 +1312,15 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __TIMEOUT__ UART receiver timeout setting. * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) */ -#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) /** * @brief Ensure that UART LIN state is valid. @@ -1519,7 +1539,8 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ @@ -1568,12 +1589,17 @@ void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); */ /* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + /** * @} */ @@ -1598,13 +1624,13 @@ uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); /** @addtogroup UART_Private_Functions UART Private Functions * @{ */ - #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); /** diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h index 0564ccb..1544e69 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h @@ -69,9 +69,9 @@ typedef struct /** @defgroup UARTEx_Word_Length UARTEx Word Length * @{ */ -#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ -#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ -#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ /** * @} */ @@ -79,8 +79,8 @@ typedef struct /** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length * @{ */ -#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ -#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ /** * @} */ @@ -89,8 +89,8 @@ typedef struct * @brief UART FIFO mode * @{ */ -#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ -#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ /** * @} */ @@ -138,7 +138,8 @@ typedef struct */ /* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime); +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); /** * @} @@ -165,7 +166,9 @@ void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); @@ -189,12 +192,13 @@ HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint3 * @param __CLOCKSOURCE__ output variable. * @retval UART clocking source, written in __CLOCKSOURCE__. */ +#if defined (LPUART1) #define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ case RCC_USART1CLKSOURCE_PCLK2: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ break; \ @@ -210,12 +214,12 @@ HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint3 default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ } \ else if((__HANDLE__)->Instance == LPUART1) \ { \ - switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ - { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ case RCC_LPUART1CLKSOURCE_PCLK1: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ break; \ @@ -231,13 +235,43 @@ HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint3 default: \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ break; \ - } \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#else +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ } \ else \ { \ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ } \ } while(0U) +#endif /* LPUART1 */ /** @brief Report the UART mask to apply to retrieve the received data * according to the word length and to the parity bits activation. @@ -250,44 +284,44 @@ HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint3 */ #define UART_MASK_COMPUTATION(__HANDLE__) \ do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ (__HANDLE__)->Mask = 0x01FFU ; \ - } \ - else \ - { \ + } \ + else \ + { \ (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ (__HANDLE__)->Mask = 0x00FFU ; \ - } \ - else \ - { \ + } \ + else \ + { \ (__HANDLE__)->Mask = 0x007FU ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ (__HANDLE__)->Mask = 0x007FU ; \ - } \ - else \ - { \ + } \ + else \ + { \ (__HANDLE__)->Mask = 0x003FU ; \ - } \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x0000U; \ - } \ -} while(0U) + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) /** * @brief Ensure that UART frame length is valid. diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h index f20ee87..8d69784 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h @@ -22,7 +22,7 @@ #define STM32WBxx_HAL_WWDG_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -89,12 +89,12 @@ typedef enum { HAL_WWDG_EWI_CB_ID = 0x00u, /*!< WWDG EWI callback ID */ HAL_WWDG_MSPINIT_CB_ID = 0x01u, /*!< WWDG MspInit callback ID */ -}HAL_WWDG_CallbackIDTypeDef; +} HAL_WWDG_CallbackIDTypeDef; /** * @brief HAL WWDG Callback pointer definition */ -typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef * hppp); /*!< pointer to a WWDG common callback functions */ +typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */ #endif /** @@ -247,7 +247,8 @@ typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef * hppp); /*!< pointer t * @arg WWDG_IT_EWI: Early Wakeup Interrupt * @retval state of __INTERRUPT__ (TRUE or FALSE). */ -#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) /** * @} diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h index efdb6b3..4fbb1fd 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h @@ -145,10 +145,10 @@ extern "C" { /* Mask containing trigger source masks for each of possible */ /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ /* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */ -#define ADC_INJ_TRIG_SOURCE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTSEL) << (4U * 0UL)) | \ - ((ADC_JSQR_JEXTSEL) << (4U * 1UL)) | \ - ((ADC_JSQR_JEXTSEL) << (4U * 2UL)) | \ - ((ADC_JSQR_JEXTSEL) << (4U * 3UL)) ) +#define ADC_INJ_TRIG_SOURCE_MASK (((LL_ADC_INJ_TRIG_SOFTWARE & ADC_JSQR_JEXTSEL) << (4U * 0UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 1UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 2UL)) | \ + ((ADC_JSQR_JEXTSEL) << (4U * 3UL)) ) /* Mask containing trigger edge masks for each of possible */ /* trigger edge selection duplicated with shifts [0; 4; 8; 12] */ @@ -367,7 +367,7 @@ extern "C" { * @retval Pointer to register address */ #define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ - ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) /** * @} @@ -762,8 +762,8 @@ typedef struct */ /** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode -* @{ -*/ + * @{ + */ #define LL_ADC_REG_CONV_SINGLE (0x00000000UL) /*!< ADC conversions are performed in single mode: one conversion per trigger */ #define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */ /** @@ -783,8 +783,8 @@ typedef struct /** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data -* @{ -*/ + * @{ + */ #define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000UL) /*!< ADC group regular behavior in case of overrun: data preserved */ #define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR_OVRMOD) /*!< ADC group regular behavior in case of overrun: data overwritten */ /** @@ -878,8 +878,8 @@ typedef struct */ /** @defgroup ADC_LL_EC_INJ_TRIG_AUTO ADC group injected - Automatic trigger mode -* @{ -*/ + * @{ + */ #define LL_ADC_INJ_TRIG_INDEPENDENT (0x00000000UL) /*!< ADC group injected conversion trigger independent. Setting mandatory if ADC group injected injected trigger source is set to an external trigger. */ #define LL_ADC_INJ_TRIG_FROM_GRP_REGULAR (ADC_CFGR_JAUTO) /*!< ADC group injected conversion trigger from ADC group regular. Setting compliant only with group injected trigger source set to SW start, without any further action on ADC group injected conversion start or stop: in this case, ADC group injected is controlled only from ADC group regular. */ /** @@ -1236,13 +1236,13 @@ typedef struct */ #define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0UL) \ - ? ( \ + ? ( \ ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \ - ) \ - : \ - ( \ + ) \ + : \ + ( \ (uint32_t)POSITION_VAL((__CHANNEL__)) \ - ) \ + ) \ ) /** @@ -1272,7 +1272,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 * @arg @ref LL_ADC_CHANNEL_18 - * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * @@ -1284,17 +1284,17 @@ typedef struct */ #define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ (((__DECIMAL_NB__) <= 9UL) \ - ? ( \ + ? ( \ ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__)) | \ (ADC_SMPR1_REGOFFSET | (((3UL * (__DECIMAL_NB__))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ - ) \ - : \ - ( \ + ) \ + : \ + ( \ ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ (ADC_AWD2CR_AWD2CH_0 << (__DECIMAL_NB__)) | \ (ADC_SMPR2_REGOFFSET | (((3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ - ) \ + ) \ ) /** @@ -1466,7 +1466,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 * @arg @ref LL_ADC_CHANNEL_18 - * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * @@ -1555,12 +1555,12 @@ typedef struct */ #define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ (((__GROUP__) == LL_ADC_GROUP_REGULAR) \ - ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ - : \ - ((__GROUP__) == LL_ADC_GROUP_INJECTED) \ - ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) \ - : \ - (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ + : \ + ((__GROUP__) == LL_ADC_GROUP_INJECTED) \ + ? (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) \ + : \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ ) /** @@ -1784,10 +1784,9 @@ typedef struct #define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\ __ADC_RESOLUTION__) \ (((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \ - / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ - (__ADC_RESOLUTION__), \ - LL_ADC_RESOLUTION_12B) \ - ) + / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \ + (__ADC_RESOLUTION__), \ + LL_ADC_RESOLUTION_12B)) /** * @brief Helper macro to calculate the temperature (unit: degree Celsius) @@ -1975,6 +1974,10 @@ __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Regis /** * @brief Set parameter common to several ADC: Clock source and prescaler. + * @note ADC clock source and prescaler must be selected in function of system clock to not exceed ADC maximum frequency, depending on devices. + * Example: STM32WB55xx ADC maximum frequency is 64MHz (corresponding to 4.27Msmp/s maximum) + * Example: STM32WB50xx ADC maximum frequency is 32MHz (corresponding to 2.13Msmp/s maximum) + * For ADC maximum frequency, refer to datasheet of the selected device. * @note On this STM32 serie, if ADC group injected is used, some * clock ratio constraints between ADC clock and AHB clock * must be respected. @@ -2041,11 +2044,13 @@ __STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) } /** - * @brief Set parameter common to several ADC: measurement path to internal - * channels (VrefInt, temperature sensor, ...). + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Configure all paths (overwrite current configuration). * @note One or several values can be selected. * Example: (LL_ADC_PATH_INTERNAL_VREFINT | * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * The values not selected are removed from configuration. * @note Stabilization time of measurement path to internal channel: * After enabling internal paths, before starting ADC conversion, * a delay is required for internal voltage reference and @@ -2080,6 +2085,77 @@ __STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_CO MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal); } +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Add paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note Stabilization time of measurement path to internal channel: + * After enabling internal paths, before starting ADC conversion, + * a delay is required for internal voltage reference and + * temperature sensor stabilization time. + * Refer to device datasheet. + * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US. + * Refer to literal @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US. + * @note ADC internal channel sampling time constraint: + * For ADC conversion of internal channels, + * a sampling time minimum value is required. + * Refer to device datasheet. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR TSEN LL_ADC_SetCommonPathInternalChAdd\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChAdd + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChAdd(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + SET_BIT(ADCxy_COMMON->CCR, PathInternal); +} + +/** + * @brief Set parameter common to several ADC: measurement path to + * internal channels (VrefInt, temperature sensor, ...). + * Remove paths to the current configuration. + * @note One or several values can be selected. + * Example: (LL_ADC_PATH_INTERNAL_VREFINT | + * LL_ADC_PATH_INTERNAL_TEMPSENSOR) + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * All ADC instances of the ADC common group must be disabled. + * This check can be done with function @ref LL_ADC_IsEnabled() for each + * ADC instance or by using helper macro helper macro + * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(). + * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalChRem\n + * CCR TSEN LL_ADC_SetCommonPathInternalChRem\n + * CCR VBATEN LL_ADC_SetCommonPathInternalChRem + * @param ADCxy_COMMON ADC common instance + * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) + * @param PathInternal This parameter can be a combination of the following values: + * @arg @ref LL_ADC_PATH_INTERNAL_NONE + * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT + * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR + * @arg @ref LL_ADC_PATH_INTERNAL_VBAT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCommonPathInternalChRem(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal) +{ + CLEAR_BIT(ADCxy_COMMON->CCR, PathInternal); +} + /** * @brief Get parameter common to several ADC: measurement path to internal * channels (VrefInt, temperature sensor, ...). @@ -2264,9 +2340,12 @@ __STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) * Moreover, this avoids risk of overrun for low frequency * applications. * How to use this low power mode: - * - Do not use with interruption or DMA since these modes - * have to clear immediately the EOC flag to free the - * IRQ vector sequencer. + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). * - Do use with polling: 1. Start conversion, * 2. Later on, when conversion data is needed: poll for end of * conversion to ensure that conversion is completed and @@ -2317,9 +2396,12 @@ __STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPower * Moreover, this avoids risk of overrun for low frequency * applications. * How to use this low power mode: - * - Do not use with interruption or DMA since these modes - * have to clear immediately the EOC flag to free the - * IRQ vector sequencer. + * - It is not recommended to use with interruption or DMA + * since these modes have to clear immediately the EOC flag + * (by CPU to free the IRQ pending event or by DMA). + * Auto wait will work but fort a very short time, discarding + * its intended benefit (except specific case of high load of CPU + * or DMA transfers which can justify usage of auto wait). * - Do use with polling: 1. Start conversion, * 2. Later on, when conversion data is needed: poll for end of * conversion to ensure that conversion is completed and @@ -2473,7 +2555,7 @@ __STATIC_INLINE void LL_ADC_SetOffset(ADC_TypeDef *ADCx, uint32_t Offsety, uint3 * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 * @arg @ref LL_ADC_CHANNEL_18 - * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * @@ -3050,7 +3132,7 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 * @arg @ref LL_ADC_CHANNEL_18 - * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * @@ -3064,10 +3146,10 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_ { register const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS)); - return (uint32_t) ((READ_BIT(*preg, + return (uint32_t)((READ_BIT(*preg, ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) >> (Rank & ADC_REG_RANK_ID_SQRX_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS - ); + ); } /** @@ -3545,7 +3627,7 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_16 * @arg @ref LL_ADC_CHANNEL_17 * @arg @ref LL_ADC_CHANNEL_18 - * @arg @ref LL_ADC_CHANNEL_VREFINT (1) + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * @@ -3558,8 +3640,8 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) { return (uint32_t)((READ_BIT(ADCx->JSQR, - (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) - >> (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS + (ADC_CHANNEL_ID_NUMBER_MASK >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) + >> (Rank & ADC_INJ_RANK_ID_JSQR_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ); } @@ -3850,15 +3932,15 @@ __STATIC_INLINE void LL_ADC_INJ_ConfigQueueContext(ADC_TypeDef *ADCx, /* If parameter "TriggerSource" is set to SW start, then parameter */ /* "ExternalTriggerEdge" is discarded. */ register uint32_t is_trigger_not_sw = (uint32_t)((TriggerSource != LL_ADC_INJ_TRIG_SOFTWARE) ? 1UL : 0UL); - MODIFY_REG(ADCx->JSQR , + MODIFY_REG(ADCx->JSQR, ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 | - ADC_JSQR_JL , - TriggerSource | + ADC_JSQR_JL, + (TriggerSource & ADC_JSQR_JEXTSEL) | (ExternalTriggerEdge * (is_trigger_not_sw)) | (((Rank4_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_4 & ADC_INJ_RANK_ID_JSQR_MASK)) | (((Rank3_Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (LL_ADC_INJ_RANK_3 & ADC_INJ_RANK_ID_JSQR_MASK)) | @@ -4287,7 +4369,7 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ /* containing other bits reserved for other purpose. */ register __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) - + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); MODIFY_REG(*preg, (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), @@ -4419,7 +4501,7 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy) { register const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) - + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); + + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); register uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK); @@ -4427,14 +4509,14 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint /* (parameter value LL_ADC_AWD_DISABLE). */ /* Else, the selected AWD is enabled and is monitoring a group of channels */ /* or a single channel. */ - if(AnalogWDMonitChannels != 0UL) + if (AnalogWDMonitChannels != 0UL) { - if(AWDy == LL_ADC_AWD1) + if (AWDy == LL_ADC_AWD1) { - if((AnalogWDMonitChannels & ADC_CFGR_AWD1SGL) == 0UL) + if ((AnalogWDMonitChannels & ADC_CFGR_AWD1SGL) == 0UL) { /* AWD monitoring a group of channels */ - AnalogWDMonitChannels = (( AnalogWDMonitChannels + AnalogWDMonitChannels = ((AnalogWDMonitChannels | (ADC_AWD_CR23_CHANNEL_MASK) ) & (~(ADC_CFGR_AWD1CH)) @@ -4450,10 +4532,10 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint } else { - if((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) + if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK) { /* AWD monitoring a group of channels */ - AnalogWDMonitChannels = ( ADC_AWD_CR23_CHANNEL_MASK + AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK | ((ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN)) ); } @@ -4461,7 +4543,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint { /* AWD monitoring a single channel */ /* AWD monitoring a group of channels */ - AnalogWDMonitChannels = ( AnalogWDMonitChannels + AnalogWDMonitChannels = (AnalogWDMonitChannels | (ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR_AWD1CH_Pos) ); @@ -4524,7 +4606,8 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None */ -__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, uint32_t AWDThresholdLowValue) +__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdHighValue, + uint32_t AWDThresholdLowValue) { /* Set bits with content of parameter "AWDThresholdxxxValue" with bits */ /* position in register and register position depending on parameter */ @@ -4592,7 +4675,8 @@ __STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None */ -__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, uint32_t AWDThresholdValue) +__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow, + uint32_t AWDThresholdValue) { /* Set bits with content of parameter "AWDThresholdValue" with bits */ /* position in register and register position depending on parameters */ @@ -4633,7 +4717,7 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AW * @arg @ref LL_ADC_AWD_THRESHOLD_LOW * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW * @retval Value between Min_Data=0x000 and Max_Data=0xFFF -*/ + */ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow) { register const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); @@ -4806,7 +4890,7 @@ __STATIC_INLINE void LL_ADC_ConfigOverSamplingRatioShift(ADC_TypeDef *ADCx, uint * @arg @ref LL_ADC_OVS_RATIO_64 * @arg @ref LL_ADC_OVS_RATIO_128 * @arg @ref LL_ADC_OVS_RATIO_256 -*/ + */ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx) { return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSR)); @@ -4827,7 +4911,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingRatio(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_6 * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_7 * @arg @ref LL_ADC_OVS_SHIFT_RIGHT_8 -*/ + */ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx) { return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSS)); @@ -5291,7 +5375,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_IsStopConversionOngoing(ADC_TypeDef *ADCx) } /** - * @brief Get ADC group regular conversion data, range fit for + * @brief Get ADC group injected conversion data, range fit for * all ADC configurations: all ADC resolutions and * all oversampling increased data width (for devices * with feature oversampling). diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h index e019aaf..825c83e 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h @@ -73,8 +73,11 @@ extern "C" { * @{ */ #define LL_AHB1_GRP1_PERIPH_ALL (0xFFFFFFFFU) + #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN +#if defined(DMA2) #define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN +#endif #define LL_AHB1_GRP1_PERIPH_DMAMUX1 RCC_AHB1ENR_DMAMUX1EN #define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN @@ -87,14 +90,19 @@ extern "C" { * @{ */ #define LL_AHB2_GRP1_PERIPH_ALL (0xFFFFFFFFU) + #define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN #define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN #define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN +#if defined(GPIOD) #define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN +#endif #define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN #define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN #define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN +#if defined(AES1) #define LL_AHB2_GRP1_PERIPH_AES1 RCC_AHB2ENR_AES1EN +#endif /** * @} */ @@ -103,7 +111,9 @@ extern "C" { * @{ */ #define LL_AHB3_GRP1_PERIPH_ALL (0xFFFFFFFFU) +#if defined(QUADSPI) #define LL_AHB3_GRP1_PERIPH_QUADSPI RCC_AHB3ENR_QUADSPIEN +#endif #define LL_AHB3_GRP1_PERIPH_PKA RCC_AHB3ENR_PKAEN #define LL_AHB3_GRP1_PERIPH_AES2 RCC_AHB3ENR_AES2EN #define LL_AHB3_GRP1_PERIPH_RNG RCC_AHB3ENR_RNGEN @@ -120,14 +130,24 @@ extern "C" { */ #define LL_APB1_GRP1_PERIPH_ALL (0xFFFFFFFFU) #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN +#if defined(LCD) #define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR1_LCDEN +#endif #define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN #define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN +#if defined(SPI2) #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN +#endif #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN +#if defined(I2C3) #define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN +#endif +#if defined(CRS) #define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN +#endif +#if defined(USB) #define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBEN +#endif #define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN /** * @} @@ -138,7 +158,10 @@ extern "C" { * @{ */ #define LL_APB1_GRP2_PERIPH_ALL (0xFFFFFFFFU) + +#if defined(LPUART1) #define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN +#endif #define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN /** * @} @@ -148,12 +171,15 @@ extern "C" { * @{ */ #define LL_APB2_GRP1_PERIPH_ALL (0xFFFFFFFFU) + #define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN #define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN #define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#if defined(SAI1) #define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#endif /** * @} */ @@ -172,7 +198,9 @@ extern "C" { * @{ */ #define LL_C2_AHB1_GRP1_PERIPH_DMA1 RCC_C2AHB1ENR_DMA1EN +#if defined(DMA2) #define LL_C2_AHB1_GRP1_PERIPH_DMA2 RCC_C2AHB1ENR_DMA2EN +#endif #define LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 RCC_C2AHB1ENR_DMAMUX1EN #define LL_C2_AHB1_GRP1_PERIPH_SRAM1 RCC_C2AHB1ENR_SRAM1EN #define LL_C2_AHB1_GRP1_PERIPH_CRC RCC_C2AHB1ENR_CRCEN @@ -188,11 +216,15 @@ extern "C" { #define LL_C2_AHB2_GRP1_PERIPH_GPIOA RCC_C2AHB2ENR_GPIOAEN #define LL_C2_AHB2_GRP1_PERIPH_GPIOB RCC_C2AHB2ENR_GPIOBEN #define LL_C2_AHB2_GRP1_PERIPH_GPIOC RCC_C2AHB2ENR_GPIOCEN +#if defined(GPIOD) #define LL_C2_AHB2_GRP1_PERIPH_GPIOD RCC_C2AHB2ENR_GPIODEN +#endif #define LL_C2_AHB2_GRP1_PERIPH_GPIOE RCC_C2AHB2ENR_GPIOEEN #define LL_C2_AHB2_GRP1_PERIPH_GPIOH RCC_C2AHB2ENR_GPIOHEN #define LL_C2_AHB2_GRP1_PERIPH_ADC RCC_C2AHB2ENR_ADCEN +#if defined(AES1) #define LL_C2_AHB2_GRP1_PERIPH_AES1 RCC_C2AHB2ENR_AES1EN +#endif /** * @} */ @@ -217,13 +249,19 @@ extern "C" { * @{ */ #define LL_C2_APB1_GRP1_PERIPH_TIM2 RCC_C2APB1ENR1_TIM2EN +#if defined(LCD) #define LL_C2_APB1_GRP1_PERIPH_LCD RCC_C2APB1ENR1_LCDEN +#endif #define LL_C2_APB1_GRP1_PERIPH_RTCAPB RCC_C2APB1ENR1_RTCAPBEN +#if defined(SPI2) #define LL_C2_APB1_GRP1_PERIPH_SPI2 RCC_C2APB1ENR1_SPI2EN +#endif #define LL_C2_APB1_GRP1_PERIPH_I2C1 RCC_C2APB1ENR1_I2C1EN +#if defined(I2C3) #define LL_C2_APB1_GRP1_PERIPH_I2C3 RCC_C2APB1ENR1_I2C3EN #define LL_C2_APB1_GRP1_PERIPH_CRS RCC_C2APB1ENR1_CRSEN #define LL_C2_APB1_GRP1_PERIPH_USB RCC_C2APB1ENR1_USBEN +#endif #define LL_C2_APB1_GRP1_PERIPH_LPTIM1 RCC_C2APB1ENR1_LPTIM1EN /** * @} @@ -233,7 +271,9 @@ extern "C" { /** @defgroup BUS_LL_EC_C2_APB1_GRP2_PERIPH C2 APB1 GRP2 PERIPH * @{ */ +#if defined(LPUART1) #define LL_C2_APB1_GRP2_PERIPH_LPUART1 RCC_C2APB1ENR2_LPUART1EN +#endif #define LL_C2_APB1_GRP2_PERIPH_LPTIM2 RCC_C2APB1ENR2_LPTIM2EN /** * @} @@ -248,7 +288,9 @@ extern "C" { #define LL_C2_APB2_GRP1_PERIPH_USART1 RCC_C2APB2ENR_USART1EN #define LL_C2_APB2_GRP1_PERIPH_TIM16 RCC_C2APB2ENR_TIM16EN #define LL_C2_APB2_GRP1_PERIPH_TIM17 RCC_C2APB2ENR_TIM17EN +#if defined(SAI1) #define LL_C2_APB2_GRP1_PERIPH_SAI1 RCC_C2APB2ENR_SAI1EN +#endif /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h index 98304e8..4348e8c 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h @@ -32,7 +32,7 @@ extern "C" { * @{ */ - +#if defined (COMP1) || defined (COMP2) /** @defgroup COMP_LL COMP * @{ @@ -53,6 +53,14 @@ extern "C" { */ /* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Macros COMP Private Macros + * @{ + */ + +/** + * @} + */ + /* Exported types ------------------------------------------------------------*/ #if defined(USE_FULL_LL_DRIVER) /** @defgroup COMP_LL_ES_INIT COMP Exported Init structure @@ -285,7 +293,7 @@ typedef struct /** * @brief Set window mode of a pair of comparators instances - * (2 consecutive COMP instances odd and even COMP and COMP). + * (2 consecutive COMP instances COMP and COMP). * @rmtoll CSR WINMODE LL_COMP_SetCommonWindowMode * @param COMPxy_COMMON Comparator common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) @@ -303,7 +311,7 @@ __STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COM /** * @brief Get window mode of a pair of comparators instances - * (2 consecutive COMP instances odd and even COMP and COMP). + * (2 consecutive COMP instances COMP and COMP). * @rmtoll CSR WINMODE LL_COMP_GetCommonWindowMode * @param COMPxy_COMMON Comparator common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() ) @@ -747,7 +755,7 @@ void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct); * @} */ - +#endif /* COMP1 || COMP2 */ /** * @} diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h index e5ca78d..f22c6dc 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dma.h @@ -53,19 +53,31 @@ extern "C" { * @param __CHANNEL_INDEX__ 0 to 6 to map DMAx_Channel1 to DMAx_Channel7 * @retval Pointer to the DMA channel */ +#if defined (DMA2) #define __LL_DMA_INSTANCE_TO_CHANNEL(__DMA_INSTANCE__, __CHANNEL_INDEX__) \ (((__DMA_INSTANCE__) == DMA1) ? (DMA1_Channel1 + (__CHANNEL_INDEX__)) : (DMA2_Channel1 + (__CHANNEL_INDEX__))) +#else +#define __LL_DMA_INSTANCE_TO_CHANNEL(__DMA_INSTANCE__, __CHANNEL_INDEX__) \ +(DMA1_Channel1 + (__CHANNEL_INDEX__)) +#endif /** * @brief Helper macro to convert DMA Instance and index into DMAMUX channel * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. +#if defined (DMA2) * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. +#endif * @param __DMA_INSTANCE__ DMAx * @param __CHANNEL_INDEX__ 0 to 6 to map DMAx_Channel1 to DMAx_Channel7 * @retval Pointer to the DMA channel */ +#if defined (DMA2) #define __LL_DMA_INSTANCE_TO_DMAMUX_CCR(__DMA_INSTANCE__, __CHANNEL_INDEX__)\ (((__DMA_INSTANCE__) == DMA1) ? (DMAMUX1_Channel0 + (__CHANNEL_INDEX__)) : (DMAMUX1_Channel7 + (__CHANNEL_INDEX__))) +#else +#define __LL_DMA_INSTANCE_TO_DMAMUX_CCR(__DMA_INSTANCE__, __CHANNEL_INDEX__)\ +(DMAMUX1_Channel0 + (__CHANNEL_INDEX__)) +#endif /** * @} */ @@ -1157,7 +1169,9 @@ __STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Cha /** * @brief Set DMA request for DMA Channels on DMAMUX Channel x. * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. +#if defined(DMA2) * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. +#endif * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest * @param DMAx DMAx Instance * @param Channel This parameter can be one of the following values: @@ -1220,7 +1234,9 @@ __STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel /** * @brief Get DMA request for DMA Channels on DMAMUX Channel x. * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. +#if defined(DMA2) * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. +#endif * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest * @param DMAx DMAx Instance * @param Channel This parameter can be one of the following values: diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h index 26e7d4b..3eacfd6 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_dmamux.h @@ -70,6 +70,7 @@ extern "C" { #define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ #define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ #define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#if defined(DMA2) #define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ #define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ #define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ @@ -77,6 +78,7 @@ extern "C" { #define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ #define LL_DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ #define LL_DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#endif #define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ #define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ #define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ @@ -96,6 +98,7 @@ extern "C" { #define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ #define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ #define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#if defined(DMA2) #define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ #define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ #define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ @@ -103,6 +106,7 @@ extern "C" { #define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ #define LL_DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ #define LL_DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#endif #define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ #define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ #define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ @@ -132,19 +136,29 @@ extern "C" { #define LL_DMAMUX_REQ_ADC1 0x00000005U /*!< DMAMUX ADC1 request */ #define LL_DMAMUX_REQ_SPI1_RX 0x00000006U /*!< DMAMUX SPI1 RX request */ #define LL_DMAMUX_REQ_SPI1_TX 0x00000007U /*!< DMAMUX SPI1 TX request */ +#if defined(SPI2) #define LL_DMAMUX_REQ_SPI2_RX 0x00000008U /*!< DMAMUX SPI2 RX request */ #define LL_DMAMUX_REQ_SPI2_TX 0x00000009U /*!< DMAMUX SPI2 TX request */ +#endif #define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */ #define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */ +#if defined(I2C3) #define LL_DMAMUX_REQ_I2C3_RX 0x0000000CU /*!< DMAMUX I2C3 RX request */ #define LL_DMAMUX_REQ_I2C3_TX 0x0000000DU /*!< DMAMUX I2C3 TX request */ +#endif #define LL_DMAMUX_REQ_USART1_RX 0x0000000EU /*!< DMAMUX USART1 RX request */ #define LL_DMAMUX_REQ_USART1_TX 0x0000000FU /*!< DMAMUX USART1 TX request */ +#if defined(LPUART1) #define LL_DMAMUX_REQ_LPUART1_RX 0x00000010U /*!< DMAMUX LPUART1 RX request */ #define LL_DMAMUX_REQ_LPUART1_TX 0x00000011U /*!< DMAMUX LPUART1 TX request */ +#endif +#if defined(SAI1) #define LL_DMAMUX_REQ_SAI1_A 0x00000012U /*!< DMAMUX SAI1 A request */ #define LL_DMAMUX_REQ_SAI1_B 0x00000013U /*!< DMAMUX SAI1 B request */ +#endif +#if defined(QUADSPI) #define LL_DMAMUX_REQ_QUADSPI 0x00000014U /*!< DMAMUX QUADSPI request */ +#endif #define LL_DMAMUX_REQ_TIM1_CH1 0x00000015U /*!< DMAMUX TIM1 CH1 request */ #define LL_DMAMUX_REQ_TIM1_CH2 0x00000016U /*!< DMAMUX TIM1 CH2 request */ #define LL_DMAMUX_REQ_TIM1_CH3 0x00000017U /*!< DMAMUX TIM1 CH3 request */ @@ -161,8 +175,10 @@ extern "C" { #define LL_DMAMUX_REQ_TIM16_UP 0x00000022U /*!< DMAMUX TIM16 UP request */ #define LL_DMAMUX_REQ_TIM17_CH1 0x00000023U /*!< DMAMUX TIM17 CH1 request */ #define LL_DMAMUX_REQ_TIM17_UP 0x00000024U /*!< DMAMUX TIM17 UP request */ +#if defined(AES1) #define LL_DMAMUX_REQ_AES1_IN 0x00000025U /*!< DMAMUX AES1_IN request */ #define LL_DMAMUX_REQ_AES1_OUT 0x00000026U /*!< DMAMUX AES1_OUT request */ +#endif #define LL_DMAMUX_REQ_AES2_IN 0x00000027U /*!< DMAMUX AES2_IN request */ #define LL_DMAMUX_REQ_AES2_OUT 0x00000028U /*!< DMAMUX AES2_OUT request */ /** @@ -179,6 +195,7 @@ extern "C" { #define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ #define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ #define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#if defined(DMA2) #define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */ #define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */ #define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */ @@ -186,6 +203,7 @@ extern "C" { #define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */ #define LL_DMAMUX_CHANNEL_12 0x0000000CU /*!< DMAMUX Channel 12 connected to DMA2 Channel 6 */ #define LL_DMAMUX_CHANNEL_13 0x0000000DU /*!< DMAMUX Channel 13 connected to DMA2 Channel 7 */ +#endif /** * @} */ @@ -324,7 +342,9 @@ extern "C" { /** * @brief Set DMAMUX request ID for DMAMUX Channel x. * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. +#if defined(DMA2) * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. +#endif * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID * @param DMAMUXx DMAMUXx Instance * @param Channel This parameter can be one of the following values: @@ -335,6 +355,7 @@ extern "C" { * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -342,6 +363,7 @@ extern "C" { * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @param Request This parameter can be one of the following values: * @arg @ref LL_DMAMUX_REQ_MEM2MEM * @arg @ref LL_DMAMUX_REQ_GENERATOR0 @@ -395,7 +417,9 @@ __STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef* DMAMUXx, uin /** * @brief Get DMAMUX request ID for DMAMUX Channel x. * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. +#if defined(DMA2) * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. +#endif * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID * @param DMAMUXx DMAMUXx Instance * @param Channel This parameter can be one of the following values: @@ -561,6 +585,7 @@ __STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -568,6 +593,7 @@ __STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval Returned value can be one of the following values: * @arg @ref LL_DMAMUX_SYNC_NO_EVENT * @arg @ref LL_DMAMUX_SYNC_POL_RISING @@ -592,6 +618,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMU * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -599,6 +626,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMU * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -619,6 +647,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMA * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -626,6 +655,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMA * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -646,6 +676,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DM * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -653,6 +684,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DM * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -673,6 +705,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeD * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -680,6 +713,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeD * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -700,6 +734,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint3 * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -707,6 +742,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint3 * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -727,6 +763,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -734,6 +771,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -754,6 +792,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -761,6 +800,7 @@ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @param SyncID This parameter can be one of the following values: * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 @@ -802,6 +842,7 @@ __STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32 * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -809,6 +850,7 @@ __STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32 * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval Returned value can be one of the following values: * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 @@ -1502,6 +1544,7 @@ __STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -1509,6 +1552,7 @@ __STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -1529,6 +1573,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -1536,6 +1581,7 @@ __STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval None */ __STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) @@ -1556,6 +1602,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uin * @arg @ref LL_DMAMUX_CHANNEL_4 * @arg @ref LL_DMAMUX_CHANNEL_5 * @arg @ref LL_DMAMUX_CHANNEL_6 +#if defined(DMA2) * @arg @ref LL_DMAMUX_CHANNEL_7 * @arg @ref LL_DMAMUX_CHANNEL_8 * @arg @ref LL_DMAMUX_CHANNEL_9 @@ -1563,6 +1610,7 @@ __STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uin * @arg @ref LL_DMAMUX_CHANNEL_11 * @arg @ref LL_DMAMUX_CHANNEL_12 * @arg @ref LL_DMAMUX_CHANNEL_13 +#endif * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h index 44bae71..4f55490 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h @@ -107,24 +107,48 @@ typedef struct #define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ #define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ #define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ #define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#endif #define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#endif #define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ -#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ -#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ #define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#endif #define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ #define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ -#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ +#endif + +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) +#define LL_EXTI_LINE_ALL_0_31 (LL_EXTI_LINE_0 | LL_EXTI_LINE_1 | LL_EXTI_LINE_2 | \ + LL_EXTI_LINE_3 | LL_EXTI_LINE_4 | LL_EXTI_LINE_5 | \ + LL_EXTI_LINE_6 | LL_EXTI_LINE_7 | LL_EXTI_LINE_8 | \ + LL_EXTI_LINE_9 | LL_EXTI_LINE_10 | LL_EXTI_LINE_11 | \ + LL_EXTI_LINE_12 | LL_EXTI_LINE_13 | LL_EXTI_LINE_14 | \ + LL_EXTI_LINE_15 | LL_EXTI_LINE_16 | LL_EXTI_LINE_17 | \ + LL_EXTI_LINE_18 | LL_EXTI_LINE_19 | LL_EXTI_LINE_20 | \ + LL_EXTI_LINE_21 | LL_EXTI_LINE_22 | LL_EXTI_LINE_23 | \ + LL_EXTI_LINE_24 | LL_EXTI_LINE_25 | LL_EXTI_LINE_28 | \ + LL_EXTI_LINE_29 | LL_EXTI_LINE_30 | LL_EXTI_LINE_31) /*!< All Extended line not reserved*/ +#else +#define LL_EXTI_LINE_ALL_0_31 (LL_EXTI_LINE_0 | LL_EXTI_LINE_1 | LL_EXTI_LINE_2 | \ + LL_EXTI_LINE_3 | LL_EXTI_LINE_4 | LL_EXTI_LINE_5 | \ + LL_EXTI_LINE_6 | LL_EXTI_LINE_7 | LL_EXTI_LINE_8 | \ + LL_EXTI_LINE_9 | LL_EXTI_LINE_10 | LL_EXTI_LINE_11 | \ + LL_EXTI_LINE_12 | LL_EXTI_LINE_13 | LL_EXTI_LINE_14 | \ + LL_EXTI_LINE_15 | LL_EXTI_LINE_16 | LL_EXTI_LINE_17 | \ + LL_EXTI_LINE_18 | LL_EXTI_LINE_19 | LL_EXTI_LINE_22 | \ + LL_EXTI_LINE_24 | LL_EXTI_LINE_29 | LL_EXTI_LINE_30) /*!< All Extended line not reserved*/ +#endif -#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ #define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ -#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ -#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ #define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ #define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */ #define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */ @@ -132,13 +156,25 @@ typedef struct #define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */ #define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */ #define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */ +#endif #define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */ #define LL_EXTI_LINE_45 EXTI_IMR2_IM45 /*!< Extended line 45 */ #define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */ -#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */ #define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */ -#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) +#define LL_EXTI_LINE_ALL_32_63 (LL_EXTI_LINE_33 | LL_EXTI_LINE_36 | LL_EXTI_LINE_37 | \ + LL_EXTI_LINE_38 | LL_EXTI_LINE_39 | LL_EXTI_LINE_40 | \ + LL_EXTI_LINE_41 | LL_EXTI_LINE_42 | LL_EXTI_LINE_43 | \ + LL_EXTI_LINE_44 | LL_EXTI_LINE_45 | LL_EXTI_LINE_46 | \ + LL_EXTI_LINE_48) /*!< All Extended line not reserved*/ +#else +#define LL_EXTI_LINE_ALL_32_63 (LL_EXTI_LINE_33 | LL_EXTI_LINE_36 | LL_EXTI_LINE_37 | \ + LL_EXTI_LINE_38 | LL_EXTI_LINE_39 | LL_EXTI_LINE_40 | \ + LL_EXTI_LINE_41 | LL_EXTI_LINE_42 | LL_EXTI_LINE_44 | \ + LL_EXTI_LINE_45 | LL_EXTI_LINE_46 | LL_EXTI_LINE_48) /*!< All Extended line not reserved*/ +#endif #define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ @@ -227,7 +263,7 @@ typedef struct /** * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -248,19 +284,18 @@ typedef struct * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) @@ -271,7 +306,7 @@ __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) /** * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 * @rmtoll C2IMR1 IMx LL_C2_EXTI_EnableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -292,19 +327,18 @@ __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine) @@ -315,11 +349,8 @@ __STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine) /** * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -327,13 +358,13 @@ __STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) @@ -344,11 +375,8 @@ __STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) /** * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 * @rmtoll C2IMR2 IMx LL_C2_EXTI_EnableIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -356,13 +384,13 @@ __STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine) @@ -373,7 +401,7 @@ __STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine) /** * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -394,19 +422,18 @@ __STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) @@ -417,7 +444,7 @@ __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) /** * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 * @rmtoll C2IMR1 IMx LL_C2_EXTI_DisableIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -438,19 +465,18 @@ __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine) @@ -461,11 +487,8 @@ __STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine) /** * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -473,13 +496,13 @@ __STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) @@ -490,11 +513,8 @@ __STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) /** * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 * @rmtoll C2IMR2 IMx LL_C2_EXTI_DisableIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -502,13 +522,13 @@ __STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine) @@ -519,7 +539,7 @@ __STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -540,19 +560,18 @@ __STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) @@ -563,7 +582,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 for cpu2 * @rmtoll C2IMR1 IMx LL_C2_EXTI_IsEnabledIT_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -584,19 +603,18 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_23 (*) * @arg @ref LL_EXTI_LINE_24 - * @arg @ref LL_EXTI_LINE_25 - * @arg @ref LL_EXTI_LINE_26 - * @arg @ref LL_EXTI_LINE_27 - * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_25 (*) + * @arg @ref LL_EXTI_LINE_28 (*) * @arg @ref LL_EXTI_LINE_29 * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_31 (*) * @arg @ref LL_EXTI_LINE_ALL_0_31 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) @@ -607,11 +625,8 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -619,13 +634,13 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) @@ -636,11 +651,8 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 for cpu2 * @rmtoll C2IMR2 IMx LL_C2_EXTI_IsEnabledIT_32_63 - * @param ExtiLine This parameter can be one of the following values: - * @arg @ref LL_EXTI_LINE_32 + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_33 - * @arg @ref LL_EXTI_LINE_34 - * @arg @ref LL_EXTI_LINE_35 * @arg @ref LL_EXTI_LINE_36 * @arg @ref LL_EXTI_LINE_37 * @arg @ref LL_EXTI_LINE_38 @@ -648,13 +660,13 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 * @arg @ref LL_EXTI_LINE_42 - * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_43 (*) * @arg @ref LL_EXTI_LINE_44 * @arg @ref LL_EXTI_LINE_45 * @arg @ref LL_EXTI_LINE_46 - * @arg @ref LL_EXTI_LINE_47 * @arg @ref LL_EXTI_LINE_48 * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) @@ -673,7 +685,7 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) /** * @brief Enable ExtiLine Event request for Lines in range 0 to 31 * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -693,9 +705,9 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) @@ -706,7 +718,7 @@ __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) /** * @brief Enable ExtiLine Event request for Lines in range 0 to 31 for cpu2 * @rmtoll C2EMR1 EMx LL_C2_EXTI_EnableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -726,9 +738,9 @@ __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_EnableEvent_0_31(uint32_t ExtiLine) @@ -742,7 +754,6 @@ __STATIC_INLINE void LL_C2_EXTI_EnableEvent_0_31(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 * @retval None */ __STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) @@ -756,7 +767,6 @@ __STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 * @retval None */ __STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine) @@ -767,7 +777,7 @@ __STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine) /** * @brief Disable ExtiLine Event request for Lines in range 0 to 31 * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -787,9 +797,8 @@ __STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) * @retval None */ __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) @@ -800,7 +809,7 @@ __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) /** * @brief Disable ExtiLine Event request for Lines in range 0 to 31 for cpu2 * @rmtoll C2EMR1 EMx LL_C2_EXTI_DisableEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -820,9 +829,9 @@ __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_C2_EXTI_DisableEvent_0_31(uint32_t ExtiLine) @@ -836,7 +845,7 @@ __STATIC_INLINE void LL_C2_EXTI_DisableEvent_0_31(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) @@ -850,7 +859,6 @@ __STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 * @retval None */ __STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine) @@ -861,7 +869,7 @@ __STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -881,9 +889,9 @@ __STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -895,7 +903,7 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) /** * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 for cpu2 * @rmtoll C2EMR1 EMx LL_C2_EXTI_IsEnabledEvent_0_31 - * @param ExtiLine This parameter can be one of the following values: + * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_0 * @arg @ref LL_EXTI_LINE_1 * @arg @ref LL_EXTI_LINE_2 @@ -915,9 +923,9 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -932,7 +940,6 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) @@ -946,7 +953,6 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) * @param ExtiLine This parameter can be a combination of the following values: * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 - * @arg @ref LL_EXTI_LINE_ALL_32_63 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) @@ -993,9 +999,10 @@ __STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) @@ -1014,9 +1021,10 @@ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) * condition. * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) @@ -1055,9 +1063,10 @@ __STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) @@ -1077,9 +1086,10 @@ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) * condition. * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) @@ -1111,9 +1121,10 @@ __STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) @@ -1125,9 +1136,10 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) @@ -1171,14 +1183,13 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_29 - * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -1198,10 +1209,10 @@ __STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) * condition. * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_35 - * @arg @ref LL_EXTI_LINE_36 - * @arg @ref LL_EXTI_LINE_37 - * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_33 (*) + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) @@ -1236,14 +1247,13 @@ __STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_29 - * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -1262,10 +1272,10 @@ __STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) * In this case, both generate a trigger condition. * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_35 - * @arg @ref LL_EXTI_LINE_36 - * @arg @ref LL_EXTI_LINE_37 - * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_33 (*) + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) @@ -1294,14 +1304,13 @@ __STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_29 - * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval State of bit (1 or 0). */ @@ -1314,10 +1323,9 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_35 - * @arg @ref LL_EXTI_LINE_36 - * @arg @ref LL_EXTI_LINE_37 - * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_33 (*) + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) @@ -1359,14 +1367,13 @@ __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_22 - * @arg @ref LL_EXTI_LINE_29 - * @arg @ref LL_EXTI_LINE_30 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @note Please check each device line mapping for EXTI Line availability * @retval None */ @@ -1384,10 +1391,10 @@ __STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) * register (by writing a 1 into the bit) * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_35 - * @arg @ref LL_EXTI_LINE_36 - * @arg @ref LL_EXTI_LINE_37 - * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_33 (*) + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) @@ -1426,11 +1433,13 @@ __STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) @@ -1444,9 +1453,10 @@ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) @@ -1477,11 +1487,13 @@ __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval @note This bit is set when the selected edge event arrives on the interrupt */ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) @@ -1495,9 +1507,10 @@ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval @note This bit is set when the selected edge event arrives on the interrupt */ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) @@ -1528,11 +1541,13 @@ __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) * @arg @ref LL_EXTI_LINE_14 * @arg @ref LL_EXTI_LINE_15 * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 * @arg @ref LL_EXTI_LINE_18 * @arg @ref LL_EXTI_LINE_19 - * @arg @ref LL_EXTI_LINE_20 - * @arg @ref LL_EXTI_LINE_21 - * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_20 (*) + * @arg @ref LL_EXTI_LINE_21 (*) + * @arg @ref LL_EXTI_LINE_31 (*) + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) @@ -1546,9 +1561,10 @@ __STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) * line. This bit is cleared by writing a 1 to the bit. * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63 * @param ExtiLine This parameter can be a combination of the following values: - * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_33 (*) * @arg @ref LL_EXTI_LINE_40 * @arg @ref LL_EXTI_LINE_41 + * (*) value not defined in all devices * @retval None */ __STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_ipcc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_ipcc.h index 559c386..95d8311 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_ipcc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_ipcc.h @@ -695,6 +695,18 @@ __STATIC_INLINE uint32_t LL_C2_IPCC_IsActiveFlag_CHx(IPCC_TypeDef const *const return ((READ_BIT(IPCCx->C2TOC1SR, Channel) == (Channel)) ? 1UL : 0UL); } +/** + * @brief Get the number of supported channels. + * @param IPCCx IPCC Instance. + * @retval Number of supported channels. + */ +__STATIC_INLINE uint32_t LL_IPCC_GetChannelNumber(IPCC_TypeDef *IPCCx) +{ + /* Added for compatibility with other STM32 series */ + (void)(IPCCx); /* To avoid gcc/g++ warnings */ + return 6U; +} + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h index 06a67cf..fdc820b 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h @@ -191,11 +191,19 @@ typedef struct #define LL_LPTIM_TRIG_SOURCE_GPIO 0x00000000U /*!(__REG__), (__VALUE__)) +#define LL_LPTIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) /** * @brief Read a value in LPTIM register @@ -310,7 +317,7 @@ typedef struct * @param __REG__ Register to be read * @retval Register value */ -#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->(__REG__)) +#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) /** * @} */ @@ -363,7 +370,7 @@ __STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == LPTIM_CR_ENABLE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == LPTIM_CR_ENABLE) ? 1UL : 0UL)); } /** @@ -416,7 +423,7 @@ __STATIC_INLINE void LL_LPTIM_DisableResetAfterRead(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledResetAfterRead(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->CR, LPTIM_CR_RSTARE) == LPTIM_CR_RSTARE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->CR, LPTIM_CR_RSTARE) == LPTIM_CR_RSTARE) ? 1UL : 0UL)); } /** @@ -467,7 +474,7 @@ __STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(LPTIM_TypeDef *LPTIMx) * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled * @note After a write to the LPTIMx_ARR register a new write operation to the * same register can only be performed when the previous write operation - * is completed. Any successive write before the ARROK flag be set, will + * is completed. Any successive write before the ARROK flag is set, will * lead to unpredictable results. * @note autoreload value be strictly greater than the compare value. * @rmtoll ARR ARR LL_LPTIM_SetAutoReload @@ -495,7 +502,7 @@ __STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(LPTIM_TypeDef *LPTIMx) * @brief Set the compare value * @note After a write to the LPTIMx_CMP register a new write operation to the * same register can only be performed when the previous write operation - * is completed. Any successive write before the CMPOK flag be set, will + * is completed. Any successive write before the CMPOK flag is set, will * lead to unpredictable results. * @rmtoll CMP CMP LL_LPTIM_SetCompare * @param LPTIMx Low-Power Timer instance @@ -683,8 +690,7 @@ __STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx) /** * @brief Set LPTIM input 1 source (default GPIO). - * @rmtoll OR OR_0 LL_LPTIM_SetInput1Src - * @rmtoll OR OR_1 LL_LPTIM_SetInput1Src + * @rmtoll OR OR LL_LPTIM_SetInput1Src * @param LPTIMx Low-Power Timer instance * @param Src This parameter can be one of the following values: * @arg @ref LL_LPTIM_INPUT1_SRC_GPIO @@ -695,12 +701,12 @@ __STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) { - WRITE_REG(LPTIMx->OR, Src); + MODIFY_REG(LPTIMx->OR, LPTIM_OR_OR, Src); } /** * @brief Set LPTIM input 2 source (default GPIO). - * @rmtoll OR OR_0 LL_LPTIM_SetInput2Src + * @rmtoll OR OR LL_LPTIM_SetInput2Src * @param LPTIMx Low-Power Timer instance * @param Src This parameter can be one of the following values: * @arg @ref LL_LPTIM_INPUT2_SRC_GPIO @@ -709,7 +715,7 @@ __STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) */ __STATIC_INLINE void LL_LPTIM_SetInput2Src(LPTIM_TypeDef *LPTIMx, uint32_t Src) { - WRITE_REG(LPTIMx->OR, Src); + MODIFY_REG(LPTIMx->OR, LPTIM_OR_OR, Src); } /** @@ -759,7 +765,7 @@ __STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == LPTIM_CFGR_TIMOUT)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == LPTIM_CFGR_TIMOUT) ? 1UL : 0UL)); } /** @@ -787,11 +793,14 @@ __STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx) * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 (*) * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 - * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 - * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 (*) + * + * (*) Value not defined in all devices. \n + * * @param Filter This parameter can be one of the following values: * @arg @ref LL_LPTIM_TRIG_FILTER_NONE * @arg @ref LL_LPTIM_TRIG_FILTER_2 @@ -816,11 +825,14 @@ __STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Sour * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1 (*) * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2 - * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 - * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 - * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 + * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1 (*) + * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2 (*) + * + * (*) Value not defined in all devices. \n + * */ __STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(LPTIM_TypeDef *LPTIMx) { @@ -1022,7 +1034,7 @@ __STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == LPTIM_CFGR_ENC)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == LPTIM_CFGR_ENC) ? 1UL : 0UL)); } /** @@ -1052,7 +1064,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFLAG_CMPM(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPM(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == LPTIM_ISR_CMPM)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == LPTIM_ISR_CMPM) ? 1UL : 0UL)); } /** @@ -1067,14 +1079,14 @@ __STATIC_INLINE void LL_LPTIM_ClearFLAG_ARRM(LPTIM_TypeDef *LPTIMx) } /** - * @brief Inform application whether a autoreload match interrupt has occured. + * @brief Inform application whether a autoreload match interrupt has occurred. * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM * @param LPTIMx Low-Power Timer instance * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == LPTIM_ISR_ARRM)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == LPTIM_ISR_ARRM) ? 1UL : 0UL)); } /** @@ -1096,7 +1108,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == LPTIM_ISR_EXTTRIG)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == LPTIM_ISR_EXTTRIG) ? 1UL : 0UL)); } /** @@ -1118,7 +1130,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPOK(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == LPTIM_ISR_CMPOK)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == LPTIM_ISR_CMPOK) ? 1UL : 0UL)); } /** @@ -1140,7 +1152,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == LPTIM_ISR_ARROK)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == LPTIM_ISR_ARROK) ? 1UL : 0UL)); } /** @@ -1162,7 +1174,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == LPTIM_ISR_UP)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == LPTIM_ISR_UP) ? 1UL : 0UL)); } /** @@ -1184,7 +1196,7 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == LPTIM_ISR_DOWN)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == LPTIM_ISR_DOWN) ? 1UL : 0UL)); } /** @@ -1225,7 +1237,7 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_CMPM(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPM(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == LPTIM_IER_CMPMIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == LPTIM_IER_CMPMIE) ? 1UL : 0UL)); } /** @@ -1258,7 +1270,7 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == LPTIM_IER_ARRMIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == LPTIM_IER_ARRMIE) ? 1UL : 0UL)); } /** @@ -1291,7 +1303,7 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == LPTIM_IER_EXTTRIGIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == LPTIM_IER_EXTTRIGIE) ? 1UL : 0UL)); } /** @@ -1324,7 +1336,7 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_CMPOK(LPTIM_TypeDef *LPTIMx) */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPOK(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == LPTIM_IER_CMPOKIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == LPTIM_IER_CMPOKIE) ? 1UL : 0UL)); } /** @@ -1353,11 +1365,11 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx) * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled. * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). + * @retval State of bit(1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == LPTIM_IER_ARROKIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == LPTIM_IER_ARROKIE) ? 1UL : 0UL)); } /** @@ -1386,11 +1398,11 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx) * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled. * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). + * @retval State of bit(1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(LPTIM_TypeDef *LPTIMx) { - return (((READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == LPTIM_IER_UPIE)? 1UL : 0UL)); + return (((READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == LPTIM_IER_UPIE) ? 1UL : 0UL)); } /** @@ -1419,11 +1431,11 @@ __STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx) * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled. * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN * @param LPTIMx Low-Power Timer instance - * @retval State of bit (1 or 0). + * @retval State of bit(1 or 0). */ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx) { - return ((READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == LPTIM_IER_DOWNIE)? 1UL : 0UL); + return ((READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == LPTIM_IER_DOWNIE) ? 1UL : 0UL); } /** diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h index 2d37e8c..c141442 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h @@ -442,7 +442,8 @@ typedef struct * @param __BAUDRATE__ Baud Rate value to achieve * @retval LPUARTDIV value to be used for BRR register filling */ -#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)])) * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)])) * LPUART_LPUARTDIV_FREQ_MUL)\ + + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) /** * @} @@ -1341,9 +1342,10 @@ __STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(USART_TypeDef *LPUARTx) * @param BaudRate Baud Rate * @retval None */ -__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, uint32_t BaudRate) +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) { - LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, (uint16_t)PrescalerValue, BaudRate); + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); } /** @@ -2485,12 +2487,12 @@ __STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(USART_TypeDef *LPUARTx, uint32 if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) { /* return address of TDR register */ - data_reg_addr = (uint32_t) & (LPUARTx->TDR); + data_reg_addr = (uint32_t) &(LPUARTx->TDR); } else { /* return address of RDR register */ - data_reg_addr = (uint32_t) & (LPUARTx->RDR); + data_reg_addr = (uint32_t) &(LPUARTx->RDR); } return data_reg_addr; @@ -2566,7 +2568,7 @@ __STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Va */ __STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) { - SET_BIT(LPUARTx->RQR, USART_RQR_SBKRQ); + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); } /** @@ -2577,7 +2579,7 @@ __STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) */ __STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) { - SET_BIT(LPUARTx->RQR, USART_RQR_MMRQ); + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); } /** @@ -2590,7 +2592,7 @@ __STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) */ __STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) { - SET_BIT(LPUARTx->RQR, USART_RQR_RXFRQ); + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); } /** diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pka.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pka.h index c853a33..21d0c50 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pka.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pka.h @@ -115,6 +115,7 @@ typedef struct #define LL_PKA_MODE_MODULAR_ADD ((uint32_t)0x0000000EU) /*!< Modular addition */ #define LL_PKA_MODE_MODULAR_SUB ((uint32_t)0x0000000FU) /*!< Modular subtraction */ #define LL_PKA_MODE_MONTGOMERY_MUL ((uint32_t)0x00000010U) /*!< Montgomery multiplication */ + /** * @} */ @@ -328,6 +329,7 @@ __STATIC_INLINE void LL_PKA_EnableIT_RAMERR(PKA_TypeDef *PKAx) SET_BIT(PKAx->CR, PKA_CR_RAMERRIE); } + /** * @brief Enable end of operation interrupt. * @rmtoll CR PROCENDIE LL_PKA_EnableIT_PROCEND @@ -394,6 +396,7 @@ __STATIC_INLINE uint32_t LL_PKA_IsEnabledIT_RAMERR(PKA_TypeDef *PKAx) return ((READ_BIT(PKAx->CR, PKA_CR_RAMERRIE) == (PKA_CR_RAMERRIE)) ? 1UL : 0UL); } + /** * @brief Check if end of operation interrupt is enabled. * @rmtoll CR PROCENDIE LL_PKA_IsEnabledIT_PROCEND @@ -435,6 +438,7 @@ __STATIC_INLINE uint32_t LL_PKA_IsActiveFlag_RAMERR(PKA_TypeDef *PKAx) return ((READ_BIT(PKAx->SR, PKA_SR_RAMERRF) == (PKA_SR_RAMERRF)) ? 1UL : 0UL); } + /** * @brief Get PKA end of operation flag. * @rmtoll SR PROCENDF LL_PKA_IsActiveFlag_PROCEND @@ -479,6 +483,7 @@ __STATIC_INLINE void LL_PKA_ClearFlag_RAMERR(PKA_TypeDef *PKAx) SET_BIT(PKAx->CLRFR, PKA_CLRFR_RAMERRFC); } + /** * @brief Clear PKA end of operation flag. * @rmtoll CLRFR PROCENDFC LL_PKA_ClearFlag_PROCEND diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h index 7006c4c..d59f5a4 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h @@ -45,6 +45,8 @@ extern "C" { /** @defgroup PWR_LL_Private_Constants PWR Private Constants * @{ */ + +#if defined(PWR_CR5_SMPSEN) /** @defgroup PWR_SMPS_Calibration PWR SMPS calibration * @{ */ @@ -57,6 +59,7 @@ extern "C" { /** * @} */ +#endif /** * @} @@ -75,10 +78,16 @@ extern "C" { * @{ */ #define LL_PWR_SCR_CWUF PWR_SCR_CWUF +#if defined(PWR_CR3_EWUP2) #define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5 +#endif #define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4 +#if defined(PWR_CR3_EWUP3) #define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3 +#endif +#if defined(PWR_CR3_EWUP2) #define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2 +#endif #define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 #define LL_PWR_SCR_CC2HF PWR_SCR_CC2HF #define LL_PWR_SCR_C802AF PWR_SCR_C802AF @@ -86,8 +95,10 @@ extern "C" { #define LL_PWR_SCR_CCRPEF PWR_SCR_CCRPEF #define LL_PWR_SCR_C802WUF PWR_SCR_C802WUF #define LL_PWR_SCR_CBLEWUF PWR_SCR_CBLEWUF +#if defined(PWR_CR5_SMPSEN) #define LL_PWR_SCR_CBORHF PWR_SCR_CBORHF #define LL_PWR_SCR_CSMPSFBF PWR_SCR_CSMPSFBF +#endif #define LL_PWR_EXTSCR_CCRPF PWR_EXTSCR_CCRPF #define LL_PWR_EXTSCR_C2CSSF PWR_EXTSCR_C2CSSF #define LL_PWR_EXTSCR_C1CSSF PWR_EXTSCR_C1CSSF @@ -100,25 +111,37 @@ extern "C" { * @{ */ #define LL_PWR_SR1_WUFI PWR_SR1_WUFI +#if defined(PWR_CR3_EWUP5) #define LL_PWR_SR1_WUF5 PWR_SR1_WUF5 +#endif #define LL_PWR_SR1_WUF4 PWR_SR1_WUF4 +#if defined(PWR_CR3_EWUP3) #define LL_PWR_SR1_WUF3 PWR_SR1_WUF3 +#endif +#if defined(PWR_CR3_EWUP2) #define LL_PWR_SR1_WUF2 PWR_SR1_WUF2 +#endif #define LL_PWR_SR1_WUF1 PWR_SR1_WUF1 #define LL_PWR_SR2_PVMO3 PWR_SR2_PVMO3 +#if defined(PWR_CR2_PVME1) #define LL_PWR_SR2_PVMO1 PWR_SR2_PVMO1 +#endif #define LL_PWR_SR2_PVDO PWR_SR2_PVDO +#if defined(PWR_CR1_VOS) #define LL_PWR_SR2_VOSF PWR_SR2_VOSF +#endif #define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF #define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS /* BOR flags */ #define LL_PWR_FLAG_BORH PWR_SR1_BORHF /* BORH interrupt flag */ +#if defined(PWR_CR5_SMPSEN) /* SMPS flags */ #define LL_PWR_FLAG_SMPS PWR_SR2_SMPSF /* SMPS step down converter ready flag */ #define LL_PWR_FLAG_SMPSB PWR_SR2_SMPSBF /* SMPS step down converter in bypass mode flag */ #define LL_PWR_FLAG_SMPSFB PWR_SR1_SMPSFB /* SMPS step down converter forced in bypass mode interrupt flag */ +#endif /* Radio (BLE or 802.15.4) flags */ #define LL_PWR_FLAG_BLEWU PWR_SR1_BLEWUF /* BLE wakeup interrupt flag */ @@ -140,6 +163,7 @@ extern "C" { * @} */ +#if defined(PWR_CR1_VOS) /** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE * @{ */ @@ -148,6 +172,7 @@ extern "C" { /** * @} */ +#endif /** @defgroup PWR_LL_EC_MODE_PWR MODE PWR * @{ @@ -179,10 +204,12 @@ extern "C" { * @} */ -/** @defgroup PWR_LL_EC_PVM_VDDUSB_1 Peripheral voltage monitoring +/** @defgroup PWR_LL_EC_PVM Peripheral voltage monitoring * @{ */ +#if defined(PWR_CR2_PVME1) #define LL_PWR_PVM_VDDUSB_1_2V (PWR_CR2_PVME1) /* Monitoring VDDUSB vs. 1.2V */ +#endif #define LL_PWR_PVM_VDDA_1_62V (PWR_CR2_PVME3) /* Monitoring VDDA vs. 1.62V */ /** * @} @@ -207,10 +234,16 @@ extern "C" { * @{ */ #define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1) +#if defined(PWR_CR3_EWUP2) #define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2) +#endif +#if defined(PWR_CR3_EWUP3) #define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3) +#endif #define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4) +#if defined(PWR_CR3_EWUP5) #define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5) +#endif /** * @} */ @@ -240,6 +273,7 @@ extern "C" { /** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT * @{ */ +#if defined(PWR_PUCRC_PC0) /* Note: LL_PWR_GPIO_BIT_x defined from port C because all pins are available */ /* for PWR pull-up and pull-down. */ #define LL_PWR_GPIO_BIT_0 (PWR_PUCRC_PC0) @@ -258,10 +292,29 @@ extern "C" { #define LL_PWR_GPIO_BIT_13 (PWR_PUCRC_PC13) #define LL_PWR_GPIO_BIT_14 (PWR_PUCRC_PC14) #define LL_PWR_GPIO_BIT_15 (PWR_PUCRC_PC15) +#else +#define LL_PWR_GPIO_BIT_0 (PWR_PUCRA_PA0) +#define LL_PWR_GPIO_BIT_1 (PWR_PUCRA_PA1) +#define LL_PWR_GPIO_BIT_2 (PWR_PUCRA_PA2) +#define LL_PWR_GPIO_BIT_3 (PWR_PUCRA_PA3) +#define LL_PWR_GPIO_BIT_4 (PWR_PUCRA_PA4) +#define LL_PWR_GPIO_BIT_5 (PWR_PUCRA_PA5) +#define LL_PWR_GPIO_BIT_6 (PWR_PUCRA_PA6) +#define LL_PWR_GPIO_BIT_7 (PWR_PUCRA_PA7) +#define LL_PWR_GPIO_BIT_8 (PWR_PUCRA_PA8) +#define LL_PWR_GPIO_BIT_9 (PWR_PUCRA_PA9) +#define LL_PWR_GPIO_BIT_10 (PWR_PUCRA_PA10) +#define LL_PWR_GPIO_BIT_11 (PWR_PUCRA_PA11) +#define LL_PWR_GPIO_BIT_12 (PWR_PUCRA_PA12) +#define LL_PWR_GPIO_BIT_13 (PWR_PUCRA_PA13) +#define LL_PWR_GPIO_BIT_14 (PWR_PUCRC_PC14) +#define LL_PWR_GPIO_BIT_15 (PWR_PUCRC_PC15) +#endif /** * @} */ +#if defined(PWR_CR5_SMPSEN) /** @defgroup PWR_LL_EC_BOR_CONFIGURATION BOR configuration * @{ */ @@ -324,6 +377,7 @@ extern "C" { /** * @} */ +#endif /** * @} @@ -400,6 +454,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) return ((READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR)) ? 1UL : 0UL); } +#if defined(PWR_CR1_VOS) /** * @brief Set the main internal regulator output voltage * @note A delay is required for the internal regulator to be ready @@ -428,6 +483,7 @@ __STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) { return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_VOS)); } +#endif /** * @brief Enable access to the backup domain @@ -544,6 +600,7 @@ __STATIC_INLINE uint32_t LL_PWR_GetFlashPowerModeSleep(void) return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_FPDS)); } +#if defined(PWR_CR2_PVME1) /** * @brief Enable VDDUSB supply * @rmtoll CR2 USV LL_PWR_EnableVddUSB @@ -573,15 +630,17 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void) { return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL); } - +#endif /** * @brief Enable the Power Voltage Monitoring on a peripheral * @rmtoll CR2 PVME1 LL_PWR_EnablePVM\n * CR2 PVME3 LL_PWR_EnablePVM * @param PeriphVoltage This parameter can be one of the following values: - * @arg @ref LL_PWR_PVM_VDDUSB_1_2V + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) @@ -594,8 +653,10 @@ __STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) * @rmtoll CR2 PVME1 LL_PWR_DisablePVM\n * CR2 PVME3 LL_PWR_DisablePVM * @param PeriphVoltage This parameter can be one of the following values: - * @arg @ref LL_PWR_PVM_VDDUSB_1_2V + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) @@ -608,8 +669,10 @@ __STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) * @rmtoll CR2 PVME1 LL_PWR_IsEnabledPVM\n * CR2 PVME3 LL_PWR_IsEnabledPVM * @param PeriphVoltage This parameter can be one of the following values: - * @arg @ref LL_PWR_PVM_VDDUSB_1_2V + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V + * + * (*) Not available on devices STM32WB50xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage) @@ -783,10 +846,12 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM2Retention(void) * CR3 EWUP5 LL_PWR_EnableWakeUpPin\n * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) @@ -803,10 +868,12 @@ __STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) * CR3 EWUP5 LL_PWR_DisableWakeUpPin\n * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) @@ -823,10 +890,12 @@ __STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) * CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) @@ -898,10 +967,12 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) * CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) @@ -918,10 +989,12 @@ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) * CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) @@ -938,10 +1011,12 @@ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) * CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) @@ -987,7 +1062,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) */ __STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) { - SET_BIT(*((uint32_t *)GPIO), GPIONumber); + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); } /** @@ -1028,7 +1103,7 @@ __STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) */ __STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) { - CLEAR_BIT(*((uint32_t *)GPIO), GPIONumber); + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); } /** @@ -1067,7 +1142,7 @@ __STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) { - return ((READ_BIT(*((uint32_t *)(GPIO)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); } /** @@ -1108,8 +1183,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIO */ __STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) { - register __IO uint32_t temp = (uint32_t)(GPIO) + 4UL; - SET_BIT(*((uint32_t *)(temp)), GPIONumber); + SET_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber); } /** @@ -1150,8 +1224,7 @@ __STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumbe */ __STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) { - register __IO uint32_t temp = (uint32_t)(GPIO) + 4UL; - CLEAR_BIT(*((uint32_t *)(temp)), GPIONumber); + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber); } /** @@ -1190,10 +1263,10 @@ __STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumb */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) { - register __IO uint32_t temp = (uint32_t)(GPIO) + 4UL; - return ((READ_BIT(*((uint32_t *)(temp)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); } +#if defined(PWR_CR5_SMPSEN) /** * @brief Set BOR configuration * @rmtoll CR5 BORHC LL_PWR_SetBORConfig @@ -1217,11 +1290,13 @@ __STATIC_INLINE uint32_t LL_PWR_GetBORConfig(void) { return (uint32_t)(READ_BIT(PWR->CR5, PWR_CR5_BORHC)); } +#endif /** * @} */ +#if defined(PWR_CR5_SMPSEN) /** @defgroup PWR_LL_EF_Configuration_SMPS Configuration of SMPS * @{ */ @@ -1434,12 +1509,12 @@ __STATIC_INLINE void LL_PWR_SMPS_SetOutputVoltageLevel(uint32_t OutputVoltageLev { OutputVoltageLevelTrimmed = 0; } - else if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) - { - OutputVoltageLevelTrimmed = (int32_t)PWR_CR5_SMPSVOS; - } else { + if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) + { + OutputVoltageLevelTrimmed = (int32_t)PWR_CR5_SMPSVOS; + } } /* Update register */ @@ -1495,12 +1570,12 @@ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetOutputVoltageLevel(void) { OutputVoltageLevelTrimmed = (int32_t)LL_PWR_SMPS_OUTPUT_VOLTAGE_1V20; } - else if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) - { - OutputVoltageLevelTrimmed = (int32_t)LL_PWR_SMPS_OUTPUT_VOLTAGE_1V90; - } else { + if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) + { + OutputVoltageLevelTrimmed = (int32_t)LL_PWR_SMPS_OUTPUT_VOLTAGE_1V90; + } } return (uint32_t)OutputVoltageLevelTrimmed; @@ -1510,6 +1585,7 @@ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetOutputVoltageLevel(void) /** * @} */ +#endif /** @defgroup PWR_LL_EF_Configuration_Multicore Configuration of multicore, intended to be executed by CPU1 * @{ @@ -1680,10 +1756,12 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledInternWU(void) * C2CR3 EWUP5 LL_C2_PWR_EnableWakeUpPin * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_C2_PWR_EnableWakeUpPin(uint32_t WakeUpPin) @@ -1700,10 +1778,12 @@ __STATIC_INLINE void LL_C2_PWR_EnableWakeUpPin(uint32_t WakeUpPin) * C2CR3 EWUP5 LL_C2_PWR_DisableWakeUpPin * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE void LL_C2_PWR_DisableWakeUpPin(uint32_t WakeUpPin) @@ -1720,10 +1800,12 @@ __STATIC_INLINE void LL_C2_PWR_DisableWakeUpPin(uint32_t WakeUpPin) * C2CR3 EWUP5 LL_C2_PWR_IsEnabledWakeUpPin * @param WakeUpPin This parameter can be one of the following values: * @arg @ref LL_PWR_WAKEUP_PIN1 - * @arg @ref LL_PWR_WAKEUP_PIN2 - * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN2 (*) + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) * @arg @ref LL_PWR_WAKEUP_PIN4 - * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * + * (*) Not available on devices STM32WB50xx * @retval None */ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) @@ -1833,6 +1915,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void) return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL); } +#if defined(PWR_CR3_EWUP5) /** * @brief Get Wake-up Flag 5 * @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5 @@ -1842,6 +1925,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) { return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL); } +#endif /** * @brief Get Wake-up Flag 4 @@ -1853,6 +1937,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL); } +#if defined(PWR_CR3_EWUP3) /** * @brief Get Wake-up Flag 3 * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3 @@ -1862,7 +1947,9 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) { return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL); } +#endif +#if defined(PWR_CR3_EWUP2) /** * @brief Get Wake-up Flag 2 * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2 @@ -1872,6 +1959,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) { return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL); } +#endif /** * @brief Get Wake-up Flag 1 @@ -1893,6 +1981,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_WU(void) WRITE_REG(PWR->SCR, PWR_SCR_CWUF); } +#if defined(PWR_CR3_EWUP5) /** * @brief Clear Wake-up Flag 5 * @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5 @@ -1902,6 +1991,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) { WRITE_REG(PWR->SCR, PWR_SCR_CWUF5); } +#endif /** * @brief Clear Wake-up Flag 4 @@ -1913,6 +2003,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) WRITE_REG(PWR->SCR, PWR_SCR_CWUF4); } +#if defined(PWR_CR3_EWUP3) /** * @brief Clear Wake-up Flag 3 * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3 @@ -1922,7 +2013,9 @@ __STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) { WRITE_REG(PWR->SCR, PWR_SCR_CWUF3); } +#endif +#if defined(PWR_CR3_EWUP2) /** * @brief Clear Wake-up Flag 2 * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2 @@ -1932,6 +2025,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) { WRITE_REG(PWR->SCR, PWR_SCR_CWUF2); } +#endif /** * @brief Clear Wake-up Flag 1 @@ -1954,7 +2048,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO3(void) return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO3) == (PWR_SR2_PVMO3)) ? 1UL : 0UL); } - +#if defined(PWR_CR2_PVME1) /** * @brief Indicate whether VDDUSB voltage is below or above PVM1 threshold * @rmtoll SR2 PVMO1 LL_PWR_IsActiveFlag_PVMO1 @@ -1964,6 +2058,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO1(void) { return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO1) == (PWR_SR2_PVMO1)) ? 1UL : 0UL); } +#endif /** * @brief Indicate whether VDD voltage is below or above the selected PVD threshold @@ -1975,6 +2070,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL); } +#if defined(PWR_CR1_VOS) /** * @brief Indicate whether the regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level * @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS @@ -1984,6 +2080,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) { return ((READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF)) ? 1UL : 0UL); } +#endif /** * @brief Indicate whether the regulator is ready in main mode or is in low-power mode @@ -2030,6 +2127,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_BORH(void) * @} */ +#if defined(PWR_CR5_SMPSEN) /** @defgroup PWR_LL_EF_FLAG_Management_SMPS FLAG management for SMPS * @{ */ @@ -2065,6 +2163,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_SMPSFB(void) /** * @} */ +#endif /** @defgroup PWR_LL_EF_FLAG_Management_Radio FLAG management for radio (BLE or 802.15.4) * @{ @@ -2301,6 +2400,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_C2STOP_C2STB(void) * @} */ +#if defined(PWR_CR5_SMPSEN) /** @defgroup PWR_LL_EF_IT_Management_SMPS PWR IT management for SMPS * @{ */ @@ -2345,6 +2445,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledIT_BORH_SMPSFB(void) /** * @} */ +#endif /** @defgroup PWR_LL_EF_IT_Management_Radio PWR IT management for radio (BLE or 802.15.4) * @{ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h index 9fd82f8..e448827 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h @@ -124,6 +124,12 @@ typedef struct #if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ #endif /* HSI48_VALUE */ + +#if defined(SPI_I2S_SUPPORT) +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ +#endif /** * @} */ @@ -140,7 +146,9 @@ typedef struct #define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ #define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ #define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#if defined(SAI1) #define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */ +#endif #define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ #define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ /** @@ -159,7 +167,9 @@ typedef struct #define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ #define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ #define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#if defined(SAI1) #define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif #define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ #define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ #define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ @@ -185,7 +195,9 @@ typedef struct #define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ #define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ #define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#if defined(SAI1) #define LL_RCC_CIER_PLLSAI1RDYIE RCC_CIER_PLLSAI1RDYIE /*!< PLLSAI1 Ready Interrupt Enable */ +#endif #define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */ /** * @} @@ -286,7 +298,6 @@ typedef struct * @} */ - /** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler * @{ */ @@ -371,13 +382,13 @@ typedef struct * @} */ +#if defined(RCC_SMPS_SUPPORT) /** @defgroup RCC_LL_EC_SMPS_CLKSOURCE SMPS clock switch * @{ */ #define LL_RCC_SMPS_CLKSOURCE_HSI 0x00000000U /*!< HSI selection as SMPS clock */ #define LL_RCC_SMPS_CLKSOURCE_MSI RCC_SMPSCR_SMPSSEL_0 /*!< MSI selection as SMPS clock */ #define LL_RCC_SMPS_CLKSOURCE_HSE RCC_SMPSCR_SMPSSEL_1 /*!< HSE selection as SMPS clock */ - /** * @} */ @@ -389,7 +400,6 @@ typedef struct #define LL_RCC_SMPS_CLKSOURCE_STATUS_MSI RCC_SMPSCR_SMPSSWS_0 /*!< MSI used as SMPS clock */ #define LL_RCC_SMPS_CLKSOURCE_STATUS_HSE RCC_SMPSCR_SMPSSWS_1 /*!< HSE used as SMPS clock */ #define LL_RCC_SMPS_CLKSOURCE_STATUS_NO_CLOCK (RCC_SMPSCR_SMPSSWS_0|RCC_SMPSCR_SMPSSWS_1) /*!< No Clock used as SMPS clock */ - /** * @} */ @@ -401,13 +411,10 @@ typedef struct #define LL_RCC_SMPS_DIV_1 RCC_SMPSCR_SMPSDIV_0 /*!< SMPS clock division 1 */ #define LL_RCC_SMPS_DIV_2 RCC_SMPSCR_SMPSDIV_1 /*!< SMPS clock division 2 */ #define LL_RCC_SMPS_DIV_3 (RCC_SMPSCR_SMPSDIV_0|RCC_SMPSCR_SMPSDIV_1) /*!< SMPS clock division 3 */ - /** * @} */ - - - +#endif #if defined(USE_FULL_LL_DRIVER) /** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency @@ -431,6 +438,7 @@ typedef struct * @} */ +#if defined(LPUART1) /** @defgroup RCC_LL_EC_LPUART1_CLKSOURCE LPUART1 CLKSOURCE * @{ */ @@ -441,6 +449,7 @@ typedef struct /** * @} */ +#endif /** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE I2Cx CLKSOURCE * @{ @@ -448,9 +457,11 @@ typedef struct #define LL_RCC_I2C1_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C1 clock */ #define LL_RCC_I2C1_CLKSOURCE_SYSCLK (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (RCC_CCIPR_I2C1SEL_0 >> 4)) /*!< SYSCLK selected as I2C1 clock */ #define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (RCC_CCIPR_I2C1SEL_1 >> 4)) /*!< HSI selected as I2C1 clock */ +#if defined(I2C3) #define LL_RCC_I2C3_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C3 clock */ #define LL_RCC_I2C3_CLKSOURCE_SYSCLK (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (RCC_CCIPR_I2C3SEL_0 >> 4)) /*!< SYSCLK selected as I2C3 clock */ #define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (RCC_CCIPR_I2C3SEL_1 >> 4)) /*!< HSI selected as I2C3 clock */ +#endif /** * @} */ @@ -470,6 +481,7 @@ typedef struct * @} */ +#if defined(SAI1) /** @defgroup RCC_LL_EC_SAI1_CLKSOURCE SAI1 CLKSOURCE * @{ */ @@ -480,12 +492,15 @@ typedef struct /** * @} */ +#endif /** @defgroup RCC_LL_EC_CLK48_CLKSOURCE CLK48 CLKSOURCE * @{ */ #define LL_RCC_CLK48_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 selected as CLK48 clock*/ +#if defined(SAI1) #define LL_RCC_CLK48_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 selected as CLK48 clock*/ +#endif #define LL_RCC_CLK48_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL selected as CLK48 clock*/ #define LL_RCC_CLK48_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI selected as CLK48 clock*/ /** @@ -496,7 +511,9 @@ typedef struct * @{ */ #define LL_RCC_USB_CLKSOURCE_HSI48 LL_RCC_CLK48_CLKSOURCE_HSI48 /*!< HSI48 selected as USB clock*/ +#if defined(SAI1) #define LL_RCC_USB_CLKSOURCE_PLLSAI1 LL_RCC_CLK48_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 selected as USB clock*/ +#endif #define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CLK48_CLKSOURCE_PLL /*!< PLL selected as USB clock*/ #define LL_RCC_USB_CLKSOURCE_MSI LL_RCC_CLK48_CLKSOURCE_MSI /*!< MSI selected as USB clock*/ /** @@ -507,7 +524,11 @@ typedef struct * @{ */ #define LL_RCC_ADC_CLKSOURCE_NONE 0x00000000U /*!< no Clock used as ADC clock*/ +#if defined(STM32WB55xx) || defined (STM32WB5Mxx) #define LL_RCC_ADC_CLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 /*!< PLLSAI1 selected as ADC clock*/ +#elif defined(STM32WB35xx) +#define LL_RCC_ADC_CLKSOURCE_HSI RCC_CCIPR_ADCSEL_0 /*!< HSI selected as ADC clock*/ +#endif #define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_1 /*!< PLL selected as ADC clock*/ #define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK selected as ADC clock*/ /** @@ -524,6 +545,19 @@ typedef struct * @} */ +#if defined(SPI_I2S_SUPPORT) +/** @defgroup RCC_LL_EC_I2SCLKSOURCE Peripheral I2S clock source selection + * @{ + */ +#define LL_RCC_I2S_CLKSOURCE_NONE 0x00000000U /*!< no Clock used as I2S clock*/ +#define LL_RCC_I2S_CLKSOURCE_HSI RCC_CCIPR_I2SSEL_0 /*!< HSI clock used as I2S clock source */ +#define LL_RCC_I2S_CLKSOURCE_PLL RCC_CCIPR_I2SSEL_1 /*!< PLL clock used as I2S clock source */ +#define LL_RCC_I2S_CLKSOURCE_PIN RCC_CCIPR_I2SSEL /*!< External clock used as I2S clock source */ +/** + * @} + */ +#endif + /** @defgroup RCC_LL_EC_USART1 USART1 * @{ */ @@ -532,6 +566,7 @@ typedef struct * @} */ +#if defined(LPUART1) /** @defgroup RCC_LL_EC_LPUART1 LPUART1 * @{ */ @@ -539,6 +574,7 @@ typedef struct /** * @} */ +#endif /** @defgroup RCC_LL_EC_I2C1 I2C1 * @{ @@ -558,6 +594,7 @@ typedef struct * @} */ +#if defined(SAI1) /** @defgroup RCC_LL_EC_SAI1 SAI1 * @{ */ @@ -565,16 +602,16 @@ typedef struct /** * @} */ +#endif /** @defgroup RCC_LL_EC_CLK48 CLK48 * @{ */ -#define LL_RCC_CLK48_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< USB clock source selection bits */ +#define LL_RCC_CLK48_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< CLK48 clock source selection bits */ /** * @} */ - /** @defgroup RCC_LL_EC_USB USB * @{ */ @@ -599,6 +636,16 @@ typedef struct * @} */ +#if defined(SPI_I2S_SUPPORT) +/** @defgroup RCC_LL_EC_I2S I2S + * @{ + */ +#define LL_RCC_I2S_CLKSOURCE RCC_CCIPR_I2SSEL /*!< I2S clock source selection bits */ +/** + * @} + */ +#endif + /** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection * @{ */ @@ -717,6 +764,7 @@ typedef struct */ +#if defined(SAI1) /** @defgroup RCC_LL_EC_PLLSAI1Q PLLSAI1 division factor (PLLQ) * @{ */ @@ -782,6 +830,7 @@ typedef struct /** * @} */ +#endif /** * @} @@ -832,7 +881,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLN__ Between Min_Data = 6 and Max_Data = 127 * @param __PLLR__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLR_DIV_2 * @arg @ref LL_RCC_PLLR_DIV_3 @@ -846,6 +895,7 @@ typedef struct #define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U)) +#if defined(SAI1) /** * @brief Helper macro to calculate the PLLPCLK frequency used on SAI domain * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), @@ -860,7 +910,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLN__ Between Min_Data = 6 and Max_Data = 127 * @param __PLLP__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLP_DIV_2 * @arg @ref LL_RCC_PLLP_DIV_3 @@ -896,7 +946,7 @@ typedef struct */ #define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U))/ \ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) - +#endif /** * @brief Helper macro to calculate the PLLPCLK frequency used on ADC domain @@ -912,7 +962,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLN__ Between Min_Data = 6 and Max_Data = 127 * @param __PLLP__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLP_DIV_2 * @arg @ref LL_RCC_PLLP_DIV_3 @@ -950,6 +1000,60 @@ typedef struct #define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) +#if defined(SPI_I2S_SUPPORT) +/** + * @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @arg @ref LL_RCC_PLLP_DIV_32 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ + (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) +#endif + /** * @brief Helper macro to calculate the PLLQCLK frequency used on 48M domain * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), @@ -964,7 +1068,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 + * @param __PLLN__ Between Min_Data = 6 and Max_Data = 127 * @param __PLLQ__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLQ_DIV_2 * @arg @ref LL_RCC_PLLQ_DIV_3 @@ -978,6 +1082,7 @@ typedef struct #define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U)) +#if defined(SAI1) /** * @brief Helper macro to calculate the PLLSAI1PCLK frequency used for SAI domain * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), @@ -992,7 +1097,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1N__ Between 6 and 127 * @param __PLLSAI1P__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1P_DIV_2 * @arg @ref LL_RCC_PLLSAI1P_DIV_3 @@ -1045,7 +1150,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1N__ Between 6 and 127 * @param __PLLSAI1Q__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 * @arg @ref LL_RCC_PLLSAI1Q_DIV_3 @@ -1074,7 +1179,7 @@ typedef struct * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1N__ Between 6 and 127 * @param __PLLSAI1R__ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1R_DIV_2 * @arg @ref LL_RCC_PLLSAI1R_DIV_3 @@ -1088,6 +1193,7 @@ typedef struct #define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1R__) \ ((__INPUTFREQ__) * (__PLLSAI1N__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ (((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLR_Pos) + 1U)) +#endif /** * @brief Helper macro to calculate the HCLK1 frequency @@ -1908,7 +2014,7 @@ __STATIC_INLINE void LL_RCC_MSI_SetRange(uint32_t Range) __STATIC_INLINE uint32_t LL_RCC_MSI_GetRange(void) { uint32_t msiRange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE); - if(msiRange > LL_RCC_MSIRANGE_11) + if (msiRange > LL_RCC_MSIRANGE_11) { msiRange = LL_RCC_MSIRANGE_11; } @@ -2081,11 +2187,11 @@ __STATIC_INLINE uint32_t LL_RCC_GetRFWKPClockSource(void) return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_RFWKPSEL)); } - /** - * @brief Check if Radio System is reset. - * @rmtoll CSR RFRSTS LL_RCC_IsRFUnderReset - * @retval State of bit (1 or 0). - */ +/** + * @brief Check if Radio System is reset. + * @rmtoll CSR RFRSTS LL_RCC_IsRFUnderReset + * @retval State of bit (1 or 0). + */ __STATIC_INLINE uint32_t LL_RCC_IsRFUnderReset(void) { return ((READ_BIT(RCC->CSR, RCC_CSR_RFRSTS) == (RCC_CSR_RFRSTS)) ? 1UL : 0UL); @@ -2329,6 +2435,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetClkAfterWakeFromStop(void) * @} */ +#if defined(RCC_SMPS_SUPPORT) /** @defgroup RCC_LL_EF_SMPS SMPS * @{ */ @@ -2411,7 +2518,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetSMPSPrescaler(void) /** * @} */ - +#endif /** @defgroup RCC_LL_EF_MCO MCO * @{ @@ -2469,6 +2576,7 @@ __STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, USARTxSource); } +#if defined(LPUART1) /** * @brief Configure LPUART1x clock source * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource @@ -2483,6 +2591,7 @@ __STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) { MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, LPUARTxSource); } +#endif /** * @brief Configure I2Cx clock source @@ -2520,6 +2629,7 @@ __STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16)); } +#if defined(SAI1) /** * @brief Configure SAIx clock source * @rmtoll CCIPR SAI1SEL LL_RCC_SetSAIClockSource @@ -2534,6 +2644,7 @@ __STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) { MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI1SEL, SAIxSource); } +#endif /** * @brief Configure RNG clock source @@ -2555,9 +2666,10 @@ __STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) * @rmtoll CCIPR CLK48SEL LL_RCC_SetCLK48ClockSource * @param CLK48xSource This parameter can be one of the following values: * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 - * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI + * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_SetCLK48ClockSource(uint32_t CLK48xSource) @@ -2565,7 +2677,7 @@ __STATIC_INLINE void LL_RCC_SetCLK48ClockSource(uint32_t CLK48xSource) MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, CLK48xSource); } - +#if defined(USB) /** * @brief Configure USB clock source * @rmtoll CCIPR CLK48SEL LL_RCC_SetUSBClockSource @@ -2580,6 +2692,7 @@ __STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) { LL_RCC_SetCLK48ClockSource(USBxSource); } +#endif /** * @brief Configure RNG clock source @@ -2593,10 +2706,10 @@ __STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE * @param CLK48xSource This parameter can be one of the following values: * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 - * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI - + * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_ConfigRNGClockSource(uint32_t RNGxSource, uint32_t CLK48xSource) @@ -2614,9 +2727,11 @@ __STATIC_INLINE void LL_RCC_ConfigRNGClockSource(uint32_t RNGxSource, uint32_t C * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource * @param ADCxSource This parameter can be one of the following values: * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE - * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI (*) + * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) @@ -2624,6 +2739,23 @@ __STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); } +#if defined(SPI_I2S_SUPPORT) +/** + * @brief Configure I2Sx clock source + * @rmtoll CCIPR I2SSEL LL_RCC_SetI2SClockSource + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S_CLKSOURCE_NONE + * @arg @ref LL_RCC_I2S_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2SSEL, I2SxSource); +} +#endif + /** * @brief Get USARTx clock source * @rmtoll CCIPR USART1SEL LL_RCC_GetUSARTClockSource @@ -2640,6 +2772,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx)); } +#if defined(LPUART1) /** * @brief Get LPUARTx clock source * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource @@ -2655,6 +2788,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) { return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx)); } +#endif /** * @brief Get I2Cx clock source @@ -2696,6 +2830,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) return (uint32_t)((READ_BIT(RCC->CCIPR, LPTIMx) >> 16) | LPTIMx); } +#if defined(SAI1) /** * @brief Get SAIx clock source * @rmtoll CCIPR SAI1SEL LL_RCC_GetSAIClockSource @@ -2711,6 +2846,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) { return (uint32_t)(READ_BIT(RCC->CCIPR, SAIx)); } +#endif /** * @brief Get RNGx clock source @@ -2733,17 +2869,18 @@ __STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) * @param CLK48x This parameter can be one of the following values: * @arg @ref LL_RCC_CLK48_CLKSOURCE * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 - * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1 - * @arg @ref LL_RCC_USB_CLKSOURCE_PLL - * @arg @ref LL_RCC_USB_CLKSOURCE_MSI + * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL + * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI + * @note (*) Value not defined for all devices */ __STATIC_INLINE uint32_t LL_RCC_GetCLK48ClockSource(uint32_t CLK48x) { return (uint32_t)(READ_BIT(RCC->CCIPR, CLK48x)); } - +#if defined(USB) /** * @brief Get USBx clock source * @rmtoll CCIPR CLK48SEL LL_RCC_GetUSBClockSource @@ -2759,6 +2896,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) { return LL_RCC_GetCLK48ClockSource(USBx); } +#endif /** * @brief Get ADCx clock source @@ -2767,15 +2905,34 @@ __STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) * @arg @ref LL_RCC_ADC_CLKSOURCE * @retval Returned value can be one of the following values: * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE - * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI (*) + * @note (*) Value not defined for all devices */ __STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) { return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); } +#if defined(SPI_I2S_SUPPORT) +/** + * @brief Get I2Sx clock source + * @rmtoll CCIPR I2SSEL LL_RCC_GetI2SClockSource + * @param I2Sx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2S_CLKSOURCE_NONE + * @arg @ref LL_RCC_I2S_CLKSOURCE_PLL + * @arg @ref LL_RCC_I2S_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); +} +#endif /** * @} */ @@ -2929,7 +3086,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLR This parameter can be one of the following values: * @arg @ref LL_RCC_PLLR_DIV_2 * @arg @ref LL_RCC_PLLR_DIV_4 @@ -2943,6 +3100,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLR); } +#if defined(SAI1) /** * @brief Configure PLL used for SAI domain clock * @note PLL Source and PLLM Divider can be written only when PLL is disabled @@ -2966,7 +3124,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLP This parameter can be one of the following values: * @arg @ref LL_RCC_PLLP_DIV_2 * @arg @ref LL_RCC_PLLP_DIV_3 @@ -3006,6 +3164,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); } +#endif /** * @brief Configure PLL used for ADC domain clock @@ -3030,7 +3189,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLP This parameter can be one of the following values: * @arg @ref LL_RCC_PLLP_DIV_2 * @arg @ref LL_RCC_PLLP_DIV_3 @@ -3095,7 +3254,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLQ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLQ_DIV_2 * @arg @ref LL_RCC_PLLQ_DIV_3 @@ -3115,7 +3274,7 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, /** * @brief Get Main PLL multiplication factor for VCO * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN - * @retval Between 8 and 86 + * @retval Between 6 and 127 */ __STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) { @@ -3218,6 +3377,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); } +#if defined(SAI1) /** * @brief Enable PLL output mapped on SAI domain clock * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_SAI @@ -3239,6 +3399,7 @@ __STATIC_INLINE void LL_RCC_PLL_DisableDomain_SAI(void) { CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); } +#endif /** * @brief Enable PLL output mapped on ADC domain clock @@ -3312,6 +3473,7 @@ __STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void) * @} */ +#if defined(SAI1) /** @defgroup RCC_LL_EF_PLLSAI1 PLLSAI1 * @{ */ @@ -3370,7 +3532,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsReady(void) * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLQ This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 * @arg @ref LL_RCC_PLLSAI1Q_DIV_3 @@ -3411,7 +3573,7 @@ __STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t P * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLP This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1P_DIV_2 * @arg @ref LL_RCC_PLLSAI1P_DIV_3 @@ -3477,7 +3639,7 @@ __STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t P * @arg @ref LL_RCC_PLLM_DIV_6 * @arg @ref LL_RCC_PLLM_DIV_7 * @arg @ref LL_RCC_PLLM_DIV_8 - * @param PLLN Between 8 and 86 + * @param PLLN Between 6 and 127 * @param PLLR This parameter can be one of the following values: * @arg @ref LL_RCC_PLLSAI1R_DIV_2 * @arg @ref LL_RCC_PLLSAI1R_DIV_3 @@ -3494,38 +3656,10 @@ __STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t P MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLN | RCC_PLLSAI1CFGR_PLLR, (PLLN << RCC_PLLSAI1CFGR_PLLN_Pos) | PLLR); } -/** - * @brief Configure PLL clock source - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource - * @param PLLSource This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_MSI - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - * @retval None - */ -__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) -{ - MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); -} - -/** - * @brief Get the oscillator used as PLL clock source. - * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_PLLSOURCE_NONE - * @arg @ref LL_RCC_PLLSOURCE_MSI - * @arg @ref LL_RCC_PLLSOURCE_HSI - * @arg @ref LL_RCC_PLLSOURCE_HSE - */ -__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) -{ - return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); -} - /** * @brief Get SAI1PLL multiplication factor for VCO * @rmtoll PLLSAI1CFGR PLLN LL_RCC_PLLSAI1_GetN - * @retval Between 8 and 86 + * @retval Between 6 and 127 */ __STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetN(void) { @@ -3676,6 +3810,7 @@ __STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_ADC(void) { CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLREN); } +#endif /** * @} @@ -3747,6 +3882,34 @@ __STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); } +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + /** * @brief Clear PLL ready interrupt flag * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY @@ -3767,6 +3930,7 @@ __STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); } +#if defined(SAI1) /** * @brief Clear PLLSAI1 ready interrupt flag * @rmtoll CICR PLLSAI1RDYC LL_RCC_ClearFlag_PLLSAI1RDY @@ -3776,6 +3940,7 @@ __STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI1RDY(void) { SET_BIT(RCC->CICR, RCC_CICR_PLLSAI1RDYC); } +#endif /** * @brief Clear Clock security system interrupt flag @@ -3877,6 +4042,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); } +#if defined(SAI1) /** * @brief Check if PLLSAI1 ready interrupt occurred or not * @rmtoll CIFR PLLSAI1RDYF LL_RCC_IsActiveFlag_PLLSAI1RDY @@ -3886,6 +4052,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI1RDY(void) { return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == (RCC_CIFR_PLLSAI1RDYF)) ? 1UL : 0UL); } +#endif /** * @brief Check if Clock security system interrupt occurred or not @@ -4125,6 +4292,7 @@ __STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); } +#if defined(SAI1) /** * @brief Enable PLLSAI1 ready interrupt * @rmtoll CIER PLLSAI1RDYIE LL_RCC_EnableIT_PLLSAI1RDY @@ -4134,6 +4302,7 @@ __STATIC_INLINE void LL_RCC_EnableIT_PLLSAI1RDY(void) { SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE); } +#endif /** * @brief Enable LSE clock security system interrupt @@ -4224,6 +4393,7 @@ __STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); } +#if defined(SAI1) /** * @brief Disable PLLSAI1 ready interrupt * @rmtoll CIER PLLSAI1RDYIE LL_RCC_DisableIT_PLLSAI1RDY @@ -4233,6 +4403,7 @@ __STATIC_INLINE void LL_RCC_DisableIT_PLLSAI1RDY(void) { CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE); } +#endif /** * @brief Disable LSE clock security system interrupt @@ -4323,6 +4494,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE)) ? 1UL : 0UL); } +#if defined(SAI1) /** * @brief Checks if PLLSAI1 ready interrupt source is enabled or disabled. * @rmtoll CIER PLLSAI1RDYIE LL_RCC_IsEnabledIT_PLLSAI1RDY @@ -4332,6 +4504,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI1RDY(void) { return ((READ_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) == (RCC_CIER_PLLSAI1RDYIE)) ? 1UL : 0UL); } +#endif /** * @brief Checks if LSECSS interrupt source is enabled or disabled. @@ -4360,18 +4533,29 @@ ErrorStatus LL_RCC_DeInit(void); * @{ */ void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +#if defined(RCC_SMPS_SUPPORT) uint32_t LL_RCC_GetSMPSClockFreq(void); +#endif uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +#if defined(LPUART1) uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +#endif uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#if defined(SAI1) uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +#endif uint32_t LL_RCC_GetCLK48ClockFreq(uint32_t CLK48xSource); uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#if defined(USB) uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); uint32_t LL_RCC_GetRTCClockFreq(void); uint32_t LL_RCC_GetRFWKPClockFreq(void); +#if defined(SPI_I2S_SUPPORT) +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); +#endif /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h index cfe5e89..96d9e08 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h @@ -234,9 +234,15 @@ typedef struct */ #define LL_RTC_ISR_ITSF RTC_ISR_ITSF #define LL_RTC_ISR_RECALPF RTC_ISR_RECALPF +#if defined(RTC_TAMPER3_SUPPORT) #define LL_RTC_ISR_TAMP3F RTC_ISR_TAMP3F +#endif +#if defined(RTC_TAMPER2_SUPPORT) #define LL_RTC_ISR_TAMP2F RTC_ISR_TAMP2F +#endif +#if defined(RTC_TAMPER1_SUPPORT) #define LL_RTC_ISR_TAMP1F RTC_ISR_TAMP1F +#endif #define LL_RTC_ISR_TSOVF RTC_ISR_TSOVF #define LL_RTC_ISR_TSF RTC_ISR_TSF #define LL_RTC_ISR_WUTF RTC_ISR_WUTF @@ -261,9 +267,15 @@ typedef struct #define LL_RTC_CR_WUTIE RTC_CR_WUTIE #define LL_RTC_CR_ALRBIE RTC_CR_ALRBIE #define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +#if defined(RTC_TAMPER3_SUPPORT) #define LL_RTC_TAMPCR_TAMP3IE RTC_TAMPCR_TAMP3IE +#endif +#if defined(RTC_TAMPER2_SUPPORT) #define LL_RTC_TAMPCR_TAMP2IE RTC_TAMPCR_TAMP2IE +#endif +#if defined(RTC_TAMPER1_SUPPORT) #define LL_RTC_TAMPCR_TAMP1IE RTC_TAMPCR_TAMP1IE +#endif #define LL_RTC_TAMPCR_TAMPIE RTC_TAMPCR_TAMPIE /** * @} @@ -427,7 +439,9 @@ typedef struct #define LL_RTC_TAMPER_1 RTC_TAMPCR_TAMP1E /*!< RTC_TAMP1 input detection */ #endif /* RTC_TAMPER1_SUPPORT */ #if defined(RTC_TAMPER2_SUPPORT) +#if defined(RTC_TAMPER2_SUPPORT) #define LL_RTC_TAMPER_2 RTC_TAMPCR_TAMP2E /*!< RTC_TAMP2 input detection */ +#endif #endif /* RTC_TAMPER2_SUPPORT */ #if defined(RTC_TAMPER3_SUPPORT) #define LL_RTC_TAMPER_3 RTC_TAMPCR_TAMP3E /*!< RTC_TAMP3 input detection */ @@ -2641,9 +2655,11 @@ __STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) * TAMPCR TAMP3E LL_RTC_TAMPER_Enable * @param RTCx RTC Instance * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_1 (*) * @arg @ref LL_RTC_TAMPER_2 - * @arg @ref LL_RTC_TAMPER_3 + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ @@ -2659,9 +2675,11 @@ __STATIC_INLINE void LL_RTC_TAMPER_Enable(RTC_TypeDef *RTCx, uint32_t Tamper) * TAMPCR TAMP3E LL_RTC_TAMPER_Disable * @param RTCx RTC Instance * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_1 + * @arg @ref LL_RTC_TAMPER_1 (*) * @arg @ref LL_RTC_TAMPER_2 - * @arg @ref LL_RTC_TAMPER_3 + * @arg @ref LL_RTC_TAMPER_3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ @@ -2678,9 +2696,11 @@ __STATIC_INLINE void LL_RTC_TAMPER_Disable(RTC_TypeDef *RTCx, uint32_t Tamper) * TAMPCR TAMP3MF LL_RTC_TAMPER_EnableMask * @param RTCx RTC Instance * @param Mask This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 (*) * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 - * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ @@ -2696,9 +2716,11 @@ __STATIC_INLINE void LL_RTC_TAMPER_EnableMask(RTC_TypeDef *RTCx, uint32_t Mask) * TAMPCR TAMP3MF LL_RTC_TAMPER_DisableMask * @param RTCx RTC Instance * @param Mask This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 (*) * @arg @ref LL_RTC_TAMPER_MASK_TAMPER2 - * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ @@ -2714,9 +2736,11 @@ __STATIC_INLINE void LL_RTC_TAMPER_DisableMask(RTC_TypeDef *RTCx, uint32_t Mask) * TAMPCR TAMP3NOERASE LL_RTC_TAMPER_EnableEraseBKP * @param RTCx RTC Instance * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 (*) * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 - * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ @@ -2732,9 +2756,11 @@ __STATIC_INLINE void LL_RTC_TAMPER_EnableEraseBKP(RTC_TypeDef *RTCx, uint32_t Ta * TAMPCR TAMP3NOERASE LL_RTC_TAMPER_DisableEraseBKP * @param RTCx RTC Instance * @param Tamper This parameter can be a combination of the following values: - * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 (*) * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER2 - * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER3 (*) + * + * (*) Value not defined in all devices. \n * * @retval None */ diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_spi.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_spi.h index b422ce3..9230ff7 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_spi.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_spi.h @@ -1314,7 +1314,7 @@ __STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) */ __STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) { - return (uint32_t) & (SPIx->DR); + return (uint32_t) &(SPIx->DR); } /** @@ -1361,7 +1361,7 @@ __STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) *spidr = TxData; #else *((__IO uint8_t *)&SPIx->DR) = TxData; -#endif +#endif /* __GNUC__ */ } /** @@ -1378,7 +1378,7 @@ __STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) *spidr = TxData; #else SPIx->DR = TxData; -#endif +#endif /* __GNUC__ */ } /** @@ -1405,6 +1405,872 @@ void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); * @} */ +#if defined(SPI_I2S_SUPPORT) +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel lenght 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel lenght 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel lenght 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel lenght 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock ouput (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock ouput (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock ouput (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + #endif /* defined (SPI1) || defined (SPI2) */ /** diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h index 5a73343..06de19e 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_system.h @@ -58,6 +58,16 @@ extern "C" { /** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants * @{ */ +/** + * @brief VREFBUF VREF_SC0 & VREF_SC1 calibration values + */ +#define VREFBUF_SC0_CAL_ADDR ((uint8_t*) (0x1FFF75F0UL)) /*!< Address of VREFBUF trimming value for VRS=0, + VREF_SC0 in STM32WB datasheet */ +#define VREFBUF_SC1_CAL_ADDR ((uint8_t*) (0x1FFF7530UL)) /*!< Address of VREFBUF trimming value for VRS=1, + VREF_SC1 in STM32WB datasheet */ +/** + * @} + */ /** * @} @@ -77,7 +87,9 @@ extern "C" { #define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ #define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ #define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ +#if defined(QUADSPI) #define LL_SYSCFG_REMAP_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) /*!< QUADSPI memory mapped at 0x00000000 */ +#endif /** * @} */ @@ -90,7 +102,9 @@ extern "C" { #define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ #define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ #define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#if defined(I2C3) #define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#endif /** * @} */ @@ -238,7 +252,9 @@ extern "C" { #define LL_SYSCFG_GRP1_EXTI14 SYSCFG_IMR1_EXTI14IM /*!< Enabling of interrupt from External Interrupt Line 14 to CPU1 */ #define LL_SYSCFG_GRP1_EXTI15 SYSCFG_IMR1_EXTI15IM /*!< Enabling of interrupt from External Interrupt Line 15 to CPU1 */ +#if defined(SYSCFG_IMR2_PVM1IM) #define LL_SYSCFG_GRP2_PVM1 SYSCFG_IMR2_PVM1IM /*!< Enabling of interrupt from Power Voltage Monitoring 1 to CPU1 */ +#endif #define LL_SYSCFG_GRP2_PVM3 SYSCFG_IMR2_PVM3IM /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU1 */ #define LL_SYSCFG_GRP2_PVD SYSCFG_IMR2_PVDIM /*!< Enabling of interrupt from Power Voltage Detector to CPU1 */ /** @@ -256,8 +272,12 @@ extern "C" { #define LL_C2_SYSCFG_GRP1_FLASH SYSCFG_C2IMR1_FLASHIM /*!< Enabling of interrupt from FLASH to CPU2 */ #define LL_C2_SYSCFG_GRP1_PKA SYSCFG_C2IMR1_PKAIM /*!< Enabling of interrupt from Public Key Accelerator to CPU2 */ #define LL_C2_SYSCFG_GRP1_RNG SYSCFG_C2IMR1_RNGIM /*!< Enabling of interrupt from Random Number Generator to CPU2 */ +#if defined(AES1) #define LL_C2_SYSCFG_GRP1_AES1 SYSCFG_C2IMR1_AES1IM /*!< Enabling of interrupt from Advanced Encryption Standard 1 to CPU2 */ +#endif +#if defined(COMP1) #define LL_C2_SYSCFG_GRP1_COMP SYSCFG_C2IMR1_COMPIM /*!< Enabling of interrupt from Comparator to CPU2 */ +#endif #define LL_C2_SYSCFG_GRP1_ADC SYSCFG_C2IMR1_ADCIM /*!< Enabling of interrupt from Analog Digital Converter to CPU2 */ #define LL_C2_SYSCFG_GRP1_EXTI0 SYSCFG_C2IMR1_EXTI0IM /*!< Enabling of interrupt from External Interrupt Line 0 to CPU2 */ @@ -285,6 +305,7 @@ extern "C" { #define LL_C2_SYSCFG_GRP2_DMA1CH6 SYSCFG_C2IMR2_DMA1CH6IM /*!< Enabling of interrupt from DMA1 Channel 6 to CPU2 */ #define LL_C2_SYSCFG_GRP2_DMA1CH7 SYSCFG_C2IMR2_DMA1CH7IM /*!< Enabling of interrupt from DMA1 Channel 7 to CPU2 */ +#if defined(DMA2) #define LL_C2_SYSCFG_GRP2_DMA2CH1 SYSCFG_C2IMR2_DMA2CH1IM /*!< Enabling of interrupt from DMA2 Channel 1 to CPU2 */ #define LL_C2_SYSCFG_GRP2_DMA2CH2 SYSCFG_C2IMR2_DMA2CH2IM /*!< Enabling of interrupt from DMA2 Channel 2 to CPU2 */ #define LL_C2_SYSCFG_GRP2_DMA2CH3 SYSCFG_C2IMR2_DMA2CH3IM /*!< Enabling of interrupt from DMA2 Channel 3 to CPU2 */ @@ -292,13 +313,18 @@ extern "C" { #define LL_C2_SYSCFG_GRP2_DMA2CH5 SYSCFG_C2IMR2_DMA2CH5IM /*!< Enabling of interrupt from DMA2 Channel 5 to CPU2 */ #define LL_C2_SYSCFG_GRP2_DMA2CH6 SYSCFG_C2IMR2_DMA2CH6IM /*!< Enabling of interrupt from DMA2 Channel 6 to CPU2 */ #define LL_C2_SYSCFG_GRP2_DMA2CH7 SYSCFG_C2IMR2_DMA2CH7IM /*!< Enabling of interrupt from DMA2 Channel 7 to CPU2 */ +#endif #define LL_C2_SYSCFG_GRP2_DMAMUX1 SYSCFG_C2IMR2_DMAMUX1IM /*!< Enabling of interrupt from DMAMUX1 to CPU2 */ +#if defined(SYSCFG_C2IMR2_PVM1IM) #define LL_C2_SYSCFG_GRP2_PVM1 SYSCFG_C2IMR2_PVM1IM /*!< Enabling of interrupt from Power Voltage Monitoring 1 to CPU2 */ +#endif #define LL_C2_SYSCFG_GRP2_PVM3 SYSCFG_C2IMR2_PVM3IM /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU2 */ #define LL_C2_SYSCFG_GRP2_PVD SYSCFG_C2IMR2_PVDIM /*!< Enabling of interrupt from Power Voltage Detector to CPU2 */ #define LL_C2_SYSCFG_GRP2_TSC SYSCFG_C2IMR2_TSCIM /*!< Enabling of interrupt from Touch Sensing Controller to CPU2 */ +#if defined(LCD) #define LL_C2_SYSCFG_GRP2_LCD SYSCFG_C2IMR2_LCDIM /*!< Enabling of interrupt from Liquid Crystal Display to CPU2 */ +#endif /** * @} */ @@ -306,7 +332,9 @@ extern "C" { /** @defgroup SYSTEM_LL_EC_SECURE_IP_ACCESS SYSCFG SECURE IP ACCESS * @{ */ +#if defined(AES1) #define LL_SYSCFG_SECURE_ACCESS_AES1 SYSCFG_SIPCR_SAES1 /*!< Enabling the security access of Advanced Encryption Standard 1 KEY[7:0] */ +#endif #define LL_SYSCFG_SECURE_ACCESS_AES2 SYSCFG_SIPCR_SAES2 /*!< Enabling the security access of Advanced Encryption Standard 2 */ #define LL_SYSCFG_SECURE_ACCESS_PKA SYSCFG_SIPCR_SPKA /*!< Enabling the security access of Public Key Accelerator */ #define LL_SYSCFG_SECURE_ACCESS_RNG SYSCFG_SIPCR_SRNG /*!< Enabling the security access of Random Number Generator */ @@ -322,7 +350,9 @@ extern "C" { #define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP /*!< The window watchdog counter clock is stopped when the core is halted */ #define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted */ #define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP /*!< The I2C1 SMBus timeout is frozen */ +#if defined(I2C3) #define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1FZR1_DBG_I2C3_STOP /*!< The I2C3 SMBus timeout is frozen */ +#endif #define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP /*!< The counter clock of LPTIM1 is stopped when the core is halted */ /** * @} @@ -335,7 +365,9 @@ extern "C" { #define LL_C2_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_C2APB1FZR1_DBG_RTC_STOP /*!< The clock of the RTC counter is stopped when the core is halted */ #define LL_C2_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_C2APB1FZR1_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted */ #define LL_C2_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_C2APB1FZR1_DBG_I2C1_STOP /*!< The I2C1 SMBus timeout is frozen */ +#if defined(I2C3) #define LL_C2_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_C2APB1FZR1_DBG_I2C3_STOP /*!< The I2C3 SMBus timeout is frozen */ +#endif #define LL_C2_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP /*!< The counter clock of LPTIM1 is stopped when the core is halted */ /** * @} @@ -1854,6 +1886,24 @@ __STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void) return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS)); } +/** + * @brief Get the VREFBUF trimming value for VRS=0 (VREF_SC0) + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_SC0_GetCalibration(void) +{ + return (uint32_t)(*VREFBUF_SC0_CAL_ADDR); +} + +/** + * @brief Get the VREFBUF trimming value for VRS=1 (VREF_SC1) + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_SC1_GetCalibration(void) +{ + return (uint32_t)(*VREFBUF_SC1_CAL_ADDR); +} + /** * @brief Check if Voltage reference buffer is ready * @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady @@ -1876,6 +1926,11 @@ __STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void) /** * @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) + * @note Each VrefBuf voltage scale is calibrated in production for each device, + * data stored in flash memory. + * Functions @ref LL_VREFBUF_SC0_GetCalibration and + * @ref LL_VREFBUF_SC0_GetCalibration can be used to retrieve + * these calibration data. * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_SetTrimming * @param Value Between 0 and 0x3F * @retval None @@ -2160,8 +2215,8 @@ __STATIC_INLINE uint32_t LL_FLASH_GetUDN(void) * @brief Return the Device ID * @note The 64-bit UID64 may be used by Firmware to derive BLE 48-bit Device Address EUI-48 or * 802.15.4 64-bit Device Address EUI-64. - * For STM32WBxxxx devices, the device ID is 0x05 - * @retval Values between Min_Data=0x00 and Max_Data=0xFF (ex: Device ID is 0x05) + * For STM32WBxxxx devices, the device ID is 0x26 + * @retval Values between Min_Data=0x00 and Max_Data=0xFF (ex: Device ID is 0x26 fo STM32WB55x) */ __STATIC_INLINE uint32_t LL_FLASH_GetDeviceID(void) { diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h index b7d9980..6688456 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h @@ -120,22 +120,9 @@ static const uint8_t SHIFT_TAB_OISx[] = #define TIM_POSITION_BRK_SOURCE (POSITION_VAL(Source) & 0x1FUL) /* Generic bit definitions for TIMx_AF1 register */ -#define TIMx_AF1_BKINE TIM1_AF1_BKINE /*!< BRK BKIN input enable */ -#define TIMx_AF1_BKCOMP1E TIM1_AF1_BKCMP1E /*!< BRK COMP1 enable */ -#define TIMx_AF1_BKCOMP2E TIM1_AF1_BKCMP2E /*!< BRK COMP2 enable */ #define TIMx_AF1_BKINP TIM1_AF1_BKINP /*!< BRK BKIN input polarity */ -#define TIMx_AF1_BKCOMP1P TIM1_AF1_BKCMP1P /*!< BRK COMP1 input polarity */ -#define TIMx_AF1_BKCOMP2P TIM1_AF1_BKCMP2P /*!< BRK COMP2 input polarity */ #define TIMx_AF1_ETRSEL TIM1_AF1_ETRSEL /*!< TIMx ETR source selection */ -/* Generic bit definitions for TIMx_AF2 register */ -#define TIMx_AF2_BK2INE TIM1_AF2_BK2INE /*!< BRK2 BKIN2 input enable */ -#define TIMx_AF2_BK2COMP1E TIM1_AF2_BK2CMP1E /*!< BRK2 COMP1 enable */ -#define TIMx_AF2_BK2COMP2E TIM1_AF2_BK2CMP2E /*!< BRK2 COMP2 enable */ -#define TIMx_AF2_BK2INP TIM1_AF2_BK2INP /*!< BRK2 BKIN2 input polarity */ -#define TIMx_AF2_BK2COMP1P TIM1_AF2_BK2CMP1P /*!< BRK2 COMP1 input polarity */ -#define TIMx_AF2_BK2COMP2P TIM1_AF2_BK2CMP2P /*!< BRK2 COMP2 input polarity */ - /* Remap mask definitions */ #define TIMx_OR_RMP_SHIFT 16U #define TIMx_OR_RMP_MASK 0x0000FFFFU @@ -244,13 +231,14 @@ typedef struct This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/ - uint8_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). This means in PWM mode that (N+1) corresponds to: - the number of PWM periods in edge-aligned mode - the number of half PWM period in center-aligned mode - This parameter must be a number between 0x00 and 0xFF. + GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/ } LL_TIM_InitTypeDef; @@ -916,12 +904,15 @@ typedef struct /** @defgroup TIM_LL_EC_ETRSOURCE External Trigger Source * @{ */ -#define LL_TIM_ETRSOURCE_GPIO 0x00000000U /*!< ETR input is connected to GPIO */ +#define LL_TIM_ETRSOURCE_LEGACY 0x00000000U /*!< ETR legacy mode */ +#if defined(COMP1) && defined(COMP2) #define LL_TIM_ETRSOURCE_COMP1 TIM1_AF1_ETRSEL_0 /*!< ETR input is connected to COMP1_OUT */ #define LL_TIM_ETRSOURCE_COMP2 TIM1_AF1_ETRSEL_1 /*!< ETR input is connected to COMP2_OUT */ -#define LL_TIM_ETRSOURCE_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< ETR input is connected to ADC1 analog watchdog 1 */ -#define LL_TIM_ETRSOURCE_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /*!< ETR input is connected to ADC1 analog watchdog 2 */ -#define LL_TIM_ETRSOURCE_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< ETR input is connected to ADC1 analog watchdog 3 */ +#endif /* COMP1 && COMP2 */ +#define LL_TIM_ETRSOURCE_GPIO LL_TIM_ETRSOURCE_LEGACY /*!< ETR input is connected to GPIO through TIMx ETR remapping capability */ +#define LL_TIM_ETRSOURCE_ADC1_AWD1 LL_TIM_ETRSOURCE_LEGACY /*!< ETR input is connected to ADC1 analog watchdog 1 through TIMx ETR remapping capability */ +#define LL_TIM_ETRSOURCE_ADC1_AWD2 LL_TIM_ETRSOURCE_LEGACY /*!< ETR input is connected to ADC1 analog watchdog 2 through TIMx ETR remapping capability */ +#define LL_TIM_ETRSOURCE_ADC1_AWD3 LL_TIM_ETRSOURCE_LEGACY /*!< ETR input is connected to ADC1 analog watchdog 3 through TIMx ETR remapping capability */ /** * @} */ @@ -1109,7 +1100,9 @@ typedef struct * @{ */ #define LL_TIM_TIM1_TI1_RMP_GPIO TIM1_OR_RMP_MASK /*!< TIM1 input capture 1 is connected to GPIO */ +#if defined(COMP1) #define LL_TIM_TIM1_TI1_RMP_COMP1 (TIM1_OR_TI1_RMP | TIM1_OR_RMP_MASK) /*!< TIM1 input capture 1 is connected to COMP1 output */ +#endif /* COMP1 */ /** * @} */ @@ -1117,8 +1110,10 @@ typedef struct /** @defgroup TIM_LL_EC_TIM2_ITR1_RMP TIM2 Internal Trigger1 Remap * @{ */ -#define LL_TIM_TIM2_ITR1_RMP_NONE 0x00000000U /* !< No internal trigger on TIM2_ITR1 */ +#define LL_TIM_TIM2_ITR1_RMP_NONE TIM2_OR_RMP_MASK /* !< No internal trigger on TIM2_ITR1 */ +#if defined(USB) #define LL_TIM_TIM2_ITR1_RMP_USB_SOF (TIM2_OR_ITR1_RMP) /* !< TIM2_ITR1 is connected to USB SOF */ +#endif /* USB */ /** * @} */ @@ -1126,7 +1121,7 @@ typedef struct /** @defgroup TIM_LL_EC_TIM2_ETR_RMP TIM2 External Trigger Remap * @{ */ -#define LL_TIM_TIM2_ETR_RMP_GPIO TIM2_OR_RMP_MASK /*!< TIM2_ETR is connected to GPIO */ +#define LL_TIM_TIM2_ETR_RMP_GPIO TIM2_OR_RMP_MASK /*!< TIM2_ETR is connected to GPIO */ #define LL_TIM_TIM2_ETR_RMP_LSE (TIM2_OR_ETR_RMP | TIM2_OR_RMP_MASK) /*!< TIM2_ETR is connected to LSE */ /** * @} @@ -1136,9 +1131,11 @@ typedef struct * @{ */ #define LL_TIM_TIM2_TI4_RMP_GPIO TIM2_OR_RMP_MASK /*!< TIM2 input capture 4 is connected to GPIO */ +#if defined(COMP1) && defined(COMP2) #define LL_TIM_TIM2_TI4_RMP_COMP1 (TIM2_OR_TI4_RMP_0 | TIM2_OR_RMP_MASK) /*!< TIM2 input capture 4 is connected to COMP1_OUT */ #define LL_TIM_TIM2_TI4_RMP_COMP2 (TIM2_OR_TI4_RMP_1 | TIM2_OR_RMP_MASK) /*!< TIM2 input capture 4 is connected to COMP2_OUT */ #define LL_TIM_TIM2_TI4_RMP_COMP1_COMP2 (TIM2_OR_TI4_RMP | TIM2_OR_RMP_MASK) /*!< TIM2 input capture 4 is connected to logical OR between COMP1_OUT and COMP2_OUT */ +#endif /* COMP1 && COMP2 */ /** * @} */ @@ -1451,7 +1448,7 @@ __STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) /** * @brief Set the timer counter counting mode. - * @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to * check whether or not the counter mode selection feature is supported * by a timer instance. * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) @@ -1475,7 +1472,7 @@ __STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMo /** * @brief Get actual counter mode. - * @note Macro @ref IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to * check whether or not the counter mode selection feature is supported * by a timer instance. * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n @@ -1528,7 +1525,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) /** * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. - * @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check * whether or not the clock division feature is supported by the timer * instance. * @rmtoll CR1 CKD LL_TIM_SetClockDivision @@ -1546,7 +1543,7 @@ __STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDi /** * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. - * @note Macro @ref IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check * whether or not the clock division feature is supported by the timer * instance. * @rmtoll CR1 CKD LL_TIM_GetClockDivision @@ -1563,7 +1560,7 @@ __STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) /** * @brief Set the counter value. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. * @rmtoll CNT CNT LL_TIM_SetCounter * @param TIMx Timer instance @@ -1577,7 +1574,7 @@ __STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) /** * @brief Get the counter value. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. * @rmtoll CNT CNT LL_TIM_GetCounter * @param TIMx Timer instance @@ -1631,7 +1628,7 @@ __STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) /** * @brief Set the auto-reload value. * @note The counter is blocked while the auto-reload value is null. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter * @rmtoll ARR ARR LL_TIM_SetAutoReload @@ -1647,7 +1644,7 @@ __STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload /** * @brief Get the auto-reload value. * @rmtoll ARR ARR LL_TIM_GetAutoReload - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. * @param TIMx Timer instance * @retval Auto-reload value @@ -1660,11 +1657,11 @@ __STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) /** * @brief Set the repetition counter value. * @note For advanced timer instances RepetitionCounter can be up to 65535. - * @note Macro @ref IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a repetition counter. * @rmtoll RCR REP LL_TIM_SetRepetitionCounter * @param TIMx Timer instance - * @param RepetitionCounter between Min_Data=0 and Max_Data=255 + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. * @retval None */ __STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) @@ -1674,7 +1671,7 @@ __STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t Rep /** * @brief Get the repetition counter value. - * @note Macro @ref IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a repetition counter. * @rmtoll RCR REP LL_TIM_GetRepetitionCounter * @param TIMx Timer instance @@ -1708,6 +1705,16 @@ __STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); } +/** + * @brief Indicate whether update interrupt flag (UIF) copy is set. + * @param Counter Counter value + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(uint32_t Counter) +{ + return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL); +} + /** * @} */ @@ -1720,7 +1727,7 @@ __STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, * they are updated only when a commutation event (COM) occurs. * @note Only on channels that have a complementary output. - * @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check * whether or not a timer instance is able to generate a commutation event. * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload * @param TIMx Timer instance @@ -1733,7 +1740,7 @@ __STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) /** * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. - * @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check * whether or not a timer instance is able to generate a commutation event. * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload * @param TIMx Timer instance @@ -1746,7 +1753,7 @@ __STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) /** * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). - * @note Macro @ref IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check * whether or not a timer instance is able to generate a commutation event. * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate * @param TIMx Timer instance @@ -1790,7 +1797,7 @@ __STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) /** * @brief Set the lock level to freeze the * configuration of several capture/compare parameters. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * the lock mechanism is supported by a timer instance. * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel * @param TIMx Timer instance @@ -2092,7 +2099,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Chann /** * @brief Set the IDLE state of an output channel * @note This function is significant only for the timer instances - * supporting the break feature. Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) * can be used to check whether or not a timer instance provides * a break input. * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n @@ -2316,7 +2323,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t /** * @brief Enable clearing the output channel on an external event. * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. - * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether * or not a timer instance can clear the OCxREF signal on an external event. * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n * CCMR1 OC2CE LL_TIM_OC_EnableClear\n @@ -2343,7 +2350,7 @@ __STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) /** * @brief Disable clearing the output channel on an external event. - * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether * or not a timer instance can clear the OCxREF signal on an external event. * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n * CCMR1 OC2CE LL_TIM_OC_DisableClear\n @@ -2372,7 +2379,7 @@ __STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) * @brief Indicates clearing the output channel on an external event is enabled for the output channel. * @note This function enables clearing the output channel on an external event. * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. - * @note Macro @ref IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether * or not a timer instance can clear the OCxREF signal on an external event. * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n @@ -2400,7 +2407,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Ch /** * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals). - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * dead-time insertion feature is supported by a timer instance. * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime @@ -2416,9 +2423,9 @@ __STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) /** * @brief Set compare value for output channel 1 (TIMx_CCR1). * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * output channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 * @param TIMx Timer instance @@ -2433,9 +2440,9 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 2 (TIMx_CCR2). * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * output channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 * @param TIMx Timer instance @@ -2450,9 +2457,9 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 3 (TIMx_CCR3). * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * output channel is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 * @param TIMx Timer instance @@ -2467,9 +2474,9 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 4 (TIMx_CCR4). * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * output channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 * @param TIMx Timer instance @@ -2483,7 +2490,7 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 5 (TIMx_CCR5). - * @note Macro @ref IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not * output channel 5 is supported by a timer instance. * @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5 * @param TIMx Timer instance @@ -2497,7 +2504,7 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Set compare value for output channel 6 (TIMx_CCR6). - * @note Macro @ref IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not * output channel 6 is supported by a timer instance. * @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6 * @param TIMx Timer instance @@ -2512,9 +2519,9 @@ __STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t Compare /** * @brief Get compare value (TIMx_CCR1) set for output channel 1. * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * output channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 * @param TIMx Timer instance @@ -2528,9 +2535,9 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR2) set for output channel 2. * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * output channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 * @param TIMx Timer instance @@ -2544,9 +2551,9 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR3) set for output channel 3. * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * output channel 3 is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 * @param TIMx Timer instance @@ -2560,9 +2567,9 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR4) set for output channel 4. * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * output channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 * @param TIMx Timer instance @@ -2575,7 +2582,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR5) set for output channel 5. - * @note Macro @ref IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not * output channel 5 is supported by a timer instance. * @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5 * @param TIMx Timer instance @@ -2588,7 +2595,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(TIM_TypeDef *TIMx) /** * @brief Get compare value (TIMx_CCR6) set for output channel 6. - * @note Macro @ref IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not * output channel 6 is supported by a timer instance. * @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6 * @param TIMx Timer instance @@ -2601,7 +2608,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(TIM_TypeDef *TIMx) /** * @brief Select on which reference signal the OC5REF is combined to. - * @note Macro @ref IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports the combined 3-phase PWM mode. * @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n * CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n @@ -2905,7 +2912,7 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Chann /** * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). - * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides an XOR input. * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination * @param TIMx Timer instance @@ -2918,7 +2925,7 @@ __STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) /** * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. - * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides an XOR input. * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination * @param TIMx Timer instance @@ -2931,7 +2938,7 @@ __STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) /** * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. - * @note Macro @ref IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides an XOR input. * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination * @param TIMx Timer instance @@ -2945,9 +2952,9 @@ __STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 1. * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not * input channel 1 is supported by a timer instance. * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 * @param TIMx Timer instance @@ -2961,9 +2968,9 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 2. * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not * input channel 2 is supported by a timer instance. * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 * @param TIMx Timer instance @@ -2977,9 +2984,9 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 3. * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not * input channel 3 is supported by a timer instance. * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 * @param TIMx Timer instance @@ -2993,9 +3000,9 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) /** * @brief Get captured value for input channel 4. * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. - * @note Macro @ref IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports a 32 bits counter. - * @note Macro @ref IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not * input channel 4 is supported by a timer instance. * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 * @param TIMx Timer instance @@ -3016,7 +3023,7 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) /** * @brief Enable external clock mode 2. * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. - * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports external clock mode2. * @rmtoll SMCR ECE LL_TIM_EnableExternalClock * @param TIMx Timer instance @@ -3029,7 +3036,7 @@ __STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) /** * @brief Disable external clock mode 2. - * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports external clock mode2. * @rmtoll SMCR ECE LL_TIM_DisableExternalClock * @param TIMx Timer instance @@ -3042,7 +3049,7 @@ __STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) /** * @brief Indicate whether external clock mode 2 is enabled. - * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports external clock mode2. * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock * @param TIMx Timer instance @@ -3059,9 +3066,9 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() * function. This timer input must be configured by calling * the @ref LL_TIM_IC_Config() function. - * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports external clock mode1. - * @note Macro @ref IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports external clock mode2. * @rmtoll SMCR SMS LL_TIM_SetClockSource\n * SMCR ECE LL_TIM_SetClockSource @@ -3079,7 +3086,7 @@ __STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSour /** * @brief Set the encoder interface mode. - * @note Macro @ref IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check * whether or not a timer instance supports the encoder mode. * @rmtoll SMCR SMS LL_TIM_SetEncoderMode * @param TIMx Timer instance @@ -3103,7 +3110,7 @@ __STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMo */ /** * @brief Set the trigger output (TRGO) used for timer synchronization . - * @note Macro @ref IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check * whether or not a timer instance can operate as a master timer. * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput * @param TIMx Timer instance @@ -3125,7 +3132,7 @@ __STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSy /** * @brief Set the trigger output 2 (TRGO2) used for ADC synchronization . - * @note Macro @ref IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check + * @note Macro IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check * whether or not a timer instance can be used for ADC synchronization. * @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2 * @param TIMx Timer Instance @@ -3155,7 +3162,7 @@ __STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSyn /** * @brief Set the synchronization mode of a slave timer. - * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not * a timer instance can operate as a slave timer. * @rmtoll SMCR SMS LL_TIM_SetSlaveMode * @param TIMx Timer instance @@ -3174,7 +3181,7 @@ __STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) /** * @brief Set the selects the trigger input to be used to synchronize the counter. - * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not * a timer instance can operate as a slave timer. * @rmtoll SMCR TS LL_TIM_SetTriggerInput * @param TIMx Timer instance @@ -3196,7 +3203,7 @@ __STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerI /** * @brief Enable the Master/Slave mode. - * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not * a timer instance can operate as a slave timer. * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode * @param TIMx Timer instance @@ -3209,7 +3216,7 @@ __STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) /** * @brief Disable the Master/Slave mode. - * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not * a timer instance can operate as a slave timer. * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode * @param TIMx Timer instance @@ -3222,7 +3229,7 @@ __STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) /** * @brief Indicates whether the Master/Slave mode is enabled. - * @note Macro @ref IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not * a timer instance can operate as a slave timer. * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode * @param TIMx Timer instance @@ -3235,7 +3242,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) /** * @brief Configure the external trigger (ETR) input. - * @note Macro @ref IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides an external trigger input. * @rmtoll SMCR ETP LL_TIM_ConfigETR\n * SMCR ETPS LL_TIM_ConfigETR\n @@ -3276,17 +3283,21 @@ __STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, u /** * @brief Select the external trigger (ETR) input source. - * @note Macro @ref IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or + * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or * not a timer instance supports ETR source selection. + * @note When this function is called with LL_TIM_ETRSOURCE_GPIO, + * LL_TIM_ETRSOURCE_ADC1_AWD1, LL_TIM_ETRSOURCE_ADC1_AWD2 or + * LL_TIM_ETRSOURCE_ADC1_AWD3, ETR source relies on TIMx ETR remapping + * capability configured through the function @ref LL_TIM_SetRemap(). * @rmtoll AF1 ETRSEL LL_TIM_SetETRSource * @param TIMx Timer instance * @param ETRSource This parameter can be one of the following values: * @arg @ref LL_TIM_ETRSOURCE_GPIO - * @arg @ref LL_TIM_ETRSOURCE_COMP1 - * @arg @ref LL_TIM_ETRSOURCE_COMP2 * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD1 * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD2 * @arg @ref LL_TIM_ETRSOURCE_ADC1_AWD3 + * @arg @ref LL_TIM_ETRSOURCE_COMP1 + * @arg @ref LL_TIM_ETRSOURCE_COMP2 * @retval None */ __STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) @@ -3304,7 +3315,7 @@ __STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) */ /** * @brief Enable the break function. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR BKE LL_TIM_EnableBRK * @param TIMx Timer instance @@ -3319,7 +3330,7 @@ __STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) * @brief Disable the break function. * @rmtoll BDTR BKE LL_TIM_DisableBRK * @param TIMx Timer instance - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @retval None */ @@ -3330,7 +3341,7 @@ __STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) /** * @brief Configure the break input. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n * BDTR BKF LL_TIM_ConfigBRK @@ -3365,7 +3376,7 @@ __STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, /** * @brief Enable the break 2 function. - * @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a second break input. * @rmtoll BDTR BK2E LL_TIM_EnableBRK2 * @param TIMx Timer instance @@ -3378,7 +3389,7 @@ __STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx) /** * @brief Disable the break 2 function. - * @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a second break input. * @rmtoll BDTR BK2E LL_TIM_DisableBRK2 * @param TIMx Timer instance @@ -3391,7 +3402,7 @@ __STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx) /** * @brief Configure the break 2 input. - * @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a second break input. * @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n * BDTR BK2F LL_TIM_ConfigBRK2 @@ -3425,7 +3436,7 @@ __STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarit /** * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n * BDTR OSSR LL_TIM_SetOffStates @@ -3445,7 +3456,7 @@ __STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdl /** * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput * @param TIMx Timer instance @@ -3458,7 +3469,7 @@ __STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) /** * @brief Disable automatic output (MOE can be set only by software). - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput * @param TIMx Timer instance @@ -3471,7 +3482,7 @@ __STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) /** * @brief Indicate whether automatic output is enabled. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput * @param TIMx Timer instance @@ -3486,7 +3497,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by * software and is reset in case of break or break2 event - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs * @param TIMx Timer instance @@ -3501,7 +3512,7 @@ __STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by * software and is reset in case of break or break2 event. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs * @param TIMx Timer instance @@ -3514,7 +3525,7 @@ __STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) /** * @brief Indicates whether outputs are enabled. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs * @param TIMx Timer instance @@ -3527,22 +3538,24 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) /** * @brief Enable the signals connected to the designated timer break input. - * @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether * or not a timer instance allows for break input selection. * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n * AF1 BKCMP1E LL_TIM_EnableBreakInputSource\n * AF1 BKCMP2E LL_TIM_EnableBreakInputSource\n - * AF2 BKINE LL_TIM_EnableBreakInputSource\n - * AF2 BKCMP1E LL_TIM_EnableBreakInputSource\n - * AF2 BKCMP2E LL_TIM_EnableBreakInputSource\n + * AF2 BK2INE LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_EnableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_EnableBreakInputSource * @param TIMx Timer instance * @param BreakInput This parameter can be one of the following values: * @arg @ref LL_TIM_BREAK_INPUT_BKIN * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 * @param Source This parameter can be one of the following values: * @arg @ref LL_TIM_BKIN_SOURCE_BKIN - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 (*) + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 (*) + * + * (*) Value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) @@ -3553,22 +3566,24 @@ __STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t B /** * @brief Disable the signals connected to the designated timer break input. - * @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether * or not a timer instance allows for break input selection. * @rmtoll AF1 BKINE LL_TIM_DisableBreakInputSource\n * AF1 BKCMP1E LL_TIM_DisableBreakInputSource\n * AF1 BKCMP2E LL_TIM_DisableBreakInputSource\n - * AF2 BKINE LL_TIM_DisableBreakInputSource\n - * AF2 BKCMP1E LL_TIM_DisableBreakInputSource\n - * AF2 BKCMP2E LL_TIM_DisableBreakInputSource\n + * AF2 BK2INE LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP1E LL_TIM_DisableBreakInputSource\n + * AF2 BK2CMP2E LL_TIM_DisableBreakInputSource * @param TIMx Timer instance * @param BreakInput This parameter can be one of the following values: * @arg @ref LL_TIM_BREAK_INPUT_BKIN * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 * @param Source This parameter can be one of the following values: * @arg @ref LL_TIM_BKIN_SOURCE_BKIN - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 (*) + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 (*) + * + * (*) Value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) @@ -3579,7 +3594,7 @@ __STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t /** * @brief Set the polarity of the break signal for the timer break input. - * @note Macro @ref IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether * or not a timer instance allows for break input selection. * @rmtoll AF1 BKINP LL_TIM_SetBreakInputSourcePolarity\n * AF1 BKCMP1P LL_TIM_SetBreakInputSourcePolarity\n @@ -3593,11 +3608,13 @@ __STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t * @arg @ref LL_TIM_BREAK_INPUT_BKIN2 * @param Source This parameter can be one of the following values: * @arg @ref LL_TIM_BKIN_SOURCE_BKIN - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 - * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 (*) + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2 (*) * @param Polarity This parameter can be one of the following values: * @arg @ref LL_TIM_BKIN_POLARITY_LOW * @arg @ref LL_TIM_BKIN_POLARITY_HIGH + * + * (*) Value not defined in all devices. * @retval None */ __STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, @@ -3615,7 +3632,7 @@ __STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint3 */ /** * @brief Configures the timer DMA burst feature. - * @note Macro @ref IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or * not a timer instance supports the DMA burst mode. * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n * DCR DBA LL_TIM_ConfigDMABurst @@ -3680,7 +3697,7 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB */ /** * @brief Remap TIM inputs (input channel, internal/external triggers). - * @note Macro @ref IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not * a some timer inputs can be remapped. * @rmtoll TIM1_OR ETR_ADC1_RMP LL_TIM_SetRemap\n * TIM1_OR TI1_RMP LL_TIM_SetRemap\n @@ -3688,7 +3705,7 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB * TIM2_OR TI4_RMP LL_TIM_SetRemap\n * TIM2_OR TI1_RMP LL_TIM_SetRemap\n * TIM16_OR TI1_RMP LL_TIM_SetRemap\n - * TIM17_OR TI1_RMP LL_TIM_SetRemap\n + * TIM17_OR TI1_RMP LL_TIM_SetRemap * @param TIMx Timer instance * @param Remap Remap param depends on the TIMx. Description available only * in CHM version of the User Manual (not in .pdf). @@ -3706,13 +3723,13 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB * * . . TI1_RMP can be one of the following values * @arg @ref LL_TIM_TIM1_TI1_RMP_GPIO - * @arg @ref LL_TIM_TIM1_TI1_RMP_COMP1 + * @arg @ref LL_TIM_TIM1_TI1_RMP_COMP1 (*) * * TIM2: any combination of ITR1_RMP, ETR1_RMP, TI4_RMP where * * ITR1_RMP can be one of the following values * @arg @ref LL_TIM_TIM2_ITR1_RMP_NONE - * @arg @ref LL_TIM_TIM2_ITR1_RMP_USB_SOF + * @arg @ref LL_TIM_TIM2_ITR1_RMP_USB_SOF (*) * * . . ETR1_RMP can be one of the following values * @arg @ref LL_TIM_TIM2_ETR_RMP_GPIO @@ -3720,9 +3737,9 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB * * . . TI4_RMP can be one of the following values * @arg @ref LL_TIM_TIM2_TI4_RMP_GPIO - * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1 - * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP2 - * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1_COMP2 + * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1 (*) + * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP2 (*) + * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1_COMP2 (*) * * TIM16: one of the following values * @@ -3737,6 +3754,8 @@ __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstB * @arg @ref LL_TIM_TIM17_TI1_RMP_MSI * @arg @ref LL_TIM_TIM17_TI1_RMP_HSE_32 * @arg @ref LL_TIM_TIM17_TI1_RMP_MCO + * + * (*) Value not defined in all devices. \n * @retval None */ __STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h index 0a67470..ad2e901 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h @@ -151,6 +151,14 @@ typedef struct * @} */ +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_FS_SPEED 2U +/** + * @} + */ + #define BTABLE_ADDRESS 0x000U #define PMA_ACCESS 1U diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_utils.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_utils.h index f7e74a3..e7c1722 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_utils.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_utils.h @@ -101,7 +101,7 @@ typedef struct @ref LL_RCC_PLL_ConfigDomain_SYS(). */ uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 8 and Max_Data = 86 + This parameter must be a number between Min_Data = 6 and Max_Data = 127 This feature can be modified afterwards using unitary function @ref LL_RCC_PLL_ConfigDomain_SYS(). */ @@ -195,59 +195,59 @@ typedef struct /** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE * @{ */ - /** - * @brief Get Word0 of the unique device identifier (UID based on 96 bits) - * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format - */ - __STATIC_INLINE uint32_t LL_GetUID_Word0(void) - { - return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); - } - - /** - * @brief Get Word1 of the unique device identifier (UID based on 96 bits) - * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) - */ - __STATIC_INLINE uint32_t LL_GetUID_Word1(void) - { - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); - } - - /** - * @brief Get Word2 of the unique device identifier (UID based on 96 bits) - * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] - */ - __STATIC_INLINE uint32_t LL_GetUID_Word2(void) - { - return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); - } - - /** - * @brief Get Flash memory size - * @note This bitfield indicates the size of the device Flash memory expressed in - * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. - * @retval FLASH_SIZE[15:0]: Flash memory size - */ - __STATIC_INLINE uint32_t LL_GetFlashSize(void) - { - return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); - } - - /** - * @brief Get Package type - * @retval Returned value can be one of the following values: - * @arg @ref LL_UTILS_PACKAGETYPE_CSP100 - * @arg @ref LL_UTILS_PACKAGETYPE_CSP100_C - * @arg @ref LL_UTILS_PACKAGETYPE_QFN68 - * @arg @ref LL_UTILS_PACKAGETYPE_QFN68_C - * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 - * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_C - * - */ - __STATIC_INLINE uint32_t LL_GetPackageType(void) - { - return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); - } +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_CSP100 + * @arg @ref LL_UTILS_PACKAGETYPE_CSP100_C + * @arg @ref LL_UTILS_PACKAGETYPE_QFN68 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN68_C + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48_C + * + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); +} /** * @} diff --git a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_wwdg.h b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_wwdg.h index cb6c74b..5bc7d87 100644 --- a/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_wwdg.h +++ b/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_wwdg.h @@ -58,8 +58,8 @@ extern "C" { */ /** @defgroup WWDG_LL_EC_PRESCALER PRESCALER -* @{ -*/ + * @{ + */ #define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */ #define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ #define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ @@ -183,7 +183,7 @@ __STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx) * @arg @ref LL_WWDG_PRESCALER_32 * @arg @ref LL_WWDG_PRESCALER_64 * @arg @ref LL_WWDG_PRESCALER_128 -* @retval None + * @retval None */ __STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler) { diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c index ccb2f7f..416f81c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c @@ -56,7 +56,7 @@ * @brief STM32WBxx HAL Driver version number */ #define __STM32WBxx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32WBxx_HAL_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */ +#define __STM32WBxx_HAL_VERSION_SUB1 (0x05U) /*!< [23:16] sub1 version */ #define __STM32WBxx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ #define __STM32WBxx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32WBxx_HAL_VERSION ((__STM32WBxx_HAL_VERSION_MAIN << 24U)\ @@ -64,7 +64,9 @@ |(__STM32WBxx_HAL_VERSION_SUB2 << 8U )\ |(__STM32WBxx_HAL_VERSION_RC)) +#if defined(VREFBUF) #define VREFBUF_TIMEOUT_VALUE 10U /* 10 ms */ +#endif /** * @} @@ -77,7 +79,7 @@ */ __IO uint32_t uwTick; uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ -uint32_t uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ /** * @} */ @@ -344,17 +346,29 @@ uint32_t HAL_GetTickPrio(void) * @brief Set new tick Freq. * @retval Status */ -HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq) +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) { HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + assert_param(IS_TICKFREQ(Freq)); if (uwTickFreq != Freq) { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ uwTickFreq = Freq; /* Apply the new tick Freq */ status = HAL_InitTick(uwTickPrio); + + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } } return status; @@ -364,7 +378,7 @@ HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq) * @brief Return tick frequency. * @retval tick period in Hz */ -uint32_t HAL_GetTickFreq(void) +HAL_TickFreqTypeDef HAL_GetTickFreq(void) { return uwTickFreq; } @@ -575,6 +589,7 @@ void HAL_DBGMCU_DisableDBGStandbyMode(void) (+) Enable/Disable the Voltage reference buffer (+) Enable/Disable the I/O analog switch voltage booster (+) Enable/Disable the access for security IP (AES1, AES2, PKA, RNG) + (+) Enable/Disable the access for security IP (AES2, PKA, RNG) @endverbatim * @{ @@ -614,6 +629,7 @@ uint32_t HAL_SYSCFG_IsEnabledSRAMFetch(void) return (LL_SYSCFG_IsEnabledSRAMFetch()); } +#if defined(VREFBUF) /** * @brief Configure the internal voltage reference buffer voltage scale. * @param VoltageScaling specifies the output voltage to achieve @@ -622,14 +638,31 @@ uint32_t HAL_SYSCFG_IsEnabledSRAMFetch(void) * This requires VDDA equal to or higher than 2.4 V. * @arg @ref SYSCFG_VREFBUF_VOLTAGE_SCALE1 : VREF_OUT1 around 2.5 V. * This requires VDDA equal to or higher than 2.8 V. + * @note Retrieve the TrimmingValue from factory located at + * VREFBUF_SC0_CAL_ADDR or VREFBUF_SC1_CAL_ADDR addresses. * @retval None */ void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) { + uint32_t TrimmingValue; + /* Check the parameters */ assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); LL_VREFBUF_SetVoltageScaling(VoltageScaling); + + /* Restrieve Calibration data and store them into trimming field */ + if (VoltageScaling == SYSCFG_VREFBUF_VOLTAGE_SCALE0) + { + TrimmingValue = ((uint32_t) *VREFBUF_SC0_CAL_ADDR) & 0x3FU; + } + else + { + TrimmingValue = ((uint32_t) *VREFBUF_SC1_CAL_ADDR) & 0x3FU; + } + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + HAL_SYSCFG_VREFBUF_TrimmingConfig(TrimmingValue); } /** @@ -651,6 +684,12 @@ void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) /** * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @note Each VrefBuf voltage scale is calibrated in production for each device, + * data stored in flash memory. + * Function @ref HAL_SYSCFG_VREFBUF_VoltageScalingConfig retrieves and + * applies this calibration data as trimming value at each scale change. + * Therefore, optionally, function @ref HAL_SYSCFG_VREFBUF_TrimmingConfig + * can be used in a second time to fine tune the trimming. * @param TrimmingValue specifies trimming code for VREFBUF calibration * This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x3F * @retval None @@ -698,6 +737,7 @@ void HAL_SYSCFG_DisableVREFBUF(void) { LL_VREFBUF_Disable(); } +#endif /* VREFBUF */ /** * @brief Enable the I/O analog switch voltage booster diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c index 756f7f4..ecf52d2 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c @@ -391,7 +391,7 @@ * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpCFGR; @@ -401,7 +401,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) uint32_t tmp_adc_is_conversion_on_going_injected; /* Check ADC handle */ - if(hadc == NULL) + if (hadc == NULL) { return HAL_ERROR; } @@ -421,12 +421,12 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); - if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) { assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); - if(hadc->Init.DiscontinuousConvMode == ENABLE) + if (hadc->Init.DiscontinuousConvMode == ENABLE) { assert_param(IS_ADC_REGULAR_DISCONT_NUMBER(hadc->Init.NbrOfDiscConversion)); } @@ -437,7 +437,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* Actions performed only if ADC is coming from state reset: */ /* - Initialization of ADC MSP */ - if(hadc->State == HAL_ADC_STATE_RESET) + if (hadc->State == HAL_ADC_STATE_RESET) { #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) /* Init the ADC Callback settings */ @@ -471,7 +471,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) } /* - Exit from deep-power-down mode and ADC voltage regulator enable */ - if(LL_ADC_IsDeepPowerDownEnabled(hadc->Instance) != 0UL) + if (LL_ADC_IsDeepPowerDownEnabled(hadc->Instance) != 0UL) { /* Disable ADC deep power down mode */ LL_ADC_DisableDeepPowerDown(hadc->Instance); @@ -481,7 +481,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) re-applied once the ADC voltage regulator is enabled */ } - if(LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) { /* Enable ADC internal voltage regulator */ LL_ADC_EnableInternalRegulator(hadc->Instance); @@ -490,7 +490,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* CPU processing cycles, scaling in us split to not */ /* exceed 32 bits register capacity and handle low frequency. */ wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); - while(wait_loop_index != 0UL) + while (wait_loop_index != 0UL) { wait_loop_index--; } @@ -499,7 +499,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* Verification that ADC voltage regulator is correctly enabled, whether */ /* or not ADC is coming from state reset (if any potential problem of */ /* clocking, voltage regulator would not be enabled). */ - if(LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) + if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); @@ -516,9 +516,9 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* called to update a parameter on the fly). */ tmp_adc_reg_is_conversion_on_going = LL_ADC_REG_IsConversionOngoing(hadc->Instance); - if( ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) - && (tmp_adc_reg_is_conversion_on_going == 0UL) - ) + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + && (tmp_adc_reg_is_conversion_on_going == 0UL) + ) { /* Set ADC state */ ADC_STATE_CLR_SET(hadc->State, @@ -568,7 +568,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) hadc->Init.Overrun | hadc->Init.DataAlign | hadc->Init.Resolution | - ADC_CFGR_REG_DISCONTINUOUS((uint32_t)hadc->Init.DiscontinuousConvMode) ); + ADC_CFGR_REG_DISCONTINUOUS((uint32_t)hadc->Init.DiscontinuousConvMode)); if (hadc->Init.DiscontinuousConvMode == ENABLE) { @@ -582,7 +582,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* software start. */ if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) { - tmpCFGR |= ( (hadc->Init.ExternalTrigConv & ADC_CFGR_EXTSEL) + tmpCFGR |= ((hadc->Init.ExternalTrigConv & ADC_CFGR_EXTSEL) | hadc->Init.ExternalTrigConvEdge ); } @@ -598,13 +598,13 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) /* - Oversampling parameters Init.Oversampling */ tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { - tmpCFGR = ( ADC_CFGR_DFSDM(hadc) | - ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | - ADC_CFGR_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests) ); + tmpCFGR = (ADC_CFGR_DFSDM(hadc) | + ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests)); MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_FIELDS_2, tmpCFGR); @@ -693,12 +693,12 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; /* Check ADC handle */ - if(hadc == NULL) + if (hadc == NULL) { return HAL_ERROR; } @@ -746,20 +746,20 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) ADC_IT_JQOVF | ADC_IT_OVR | ADC_IT_JEOS | ADC_IT_JEOC | ADC_IT_EOS | ADC_IT_EOC | - ADC_IT_EOSMP | ADC_IT_RDY ) ); + ADC_IT_EOSMP | ADC_IT_RDY)); /* Reset register ISR */ __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | ADC_FLAG_AWD1 | ADC_FLAG_JQOVF | ADC_FLAG_OVR | ADC_FLAG_JEOS | ADC_FLAG_JEOC | ADC_FLAG_EOS | ADC_FLAG_EOC | - ADC_FLAG_EOSMP | ADC_FLAG_RDY ) ); + ADC_FLAG_EOSMP | ADC_FLAG_RDY)); /* Reset register CR */ - /* Bits ADC_CR_JADSTP, ADC_CR_ADSTP, ADC_CR_JADSTART, ADC_CR_ADSTART, - ADC_CR_ADCAL, ADC_CR_ADDIS and ADC_CR_ADEN are in access mode "read-set": - no direct reset applicable. - Update CR register to reset value where doable by software */ + /* Bits ADC_CR_JADSTP, ADC_CR_ADSTP, ADC_CR_JADSTART, ADC_CR_ADSTART, + ADC_CR_ADCAL, ADC_CR_ADDIS and ADC_CR_ADEN are in access mode "read-set": + no direct reset applicable. + Update CR register to reset value where doable by software */ CLEAR_BIT(hadc->Instance->CR, ADC_CR_ADVREGEN | ADC_CR_ADCALDIF); SET_BIT(hadc->Instance->CR, ADC_CR_DEEPPWD); @@ -769,15 +769,15 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) /* Reset register CFGR2 */ CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS | - ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE ); + ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE); /* Reset register SMPR1 */ CLEAR_BIT(hadc->Instance->SMPR1, ADC_SMPR1_FIELDS); /* Reset register SMPR2 */ CLEAR_BIT(hadc->Instance->SMPR2, ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | ADC_SMPR2_SMP16 | - ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | ADC_SMPR2_SMP13 | - ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | ADC_SMPR2_SMP10 ); + ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | ADC_SMPR2_SMP13 | + ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | ADC_SMPR2_SMP10); /* Reset register TR1 */ CLEAR_BIT(hadc->Instance->TR1, ADC_TR1_HT1 | ADC_TR1_LT1); @@ -790,15 +790,15 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) /* Reset register SQR1 */ CLEAR_BIT(hadc->Instance->SQR1, ADC_SQR1_SQ4 | ADC_SQR1_SQ3 | ADC_SQR1_SQ2 | - ADC_SQR1_SQ1 | ADC_SQR1_L); + ADC_SQR1_SQ1 | ADC_SQR1_L); /* Reset register SQR2 */ CLEAR_BIT(hadc->Instance->SQR2, ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 | - ADC_SQR2_SQ6 | ADC_SQR2_SQ5); + ADC_SQR2_SQ6 | ADC_SQR2_SQ5); /* Reset register SQR3 */ CLEAR_BIT(hadc->Instance->SQR3, ADC_SQR3_SQ14 | ADC_SQR3_SQ13 | ADC_SQR3_SQ12 | - ADC_SQR3_SQ11 | ADC_SQR3_SQ10); + ADC_SQR3_SQ11 | ADC_SQR3_SQ10); /* Reset register SQR4 */ CLEAR_BIT(hadc->Instance->SQR4, ADC_SQR4_SQ16 | ADC_SQR4_SQ15); @@ -895,7 +895,7 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -912,7 +912,7 @@ __weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) * the core clock reset all ADC instances). * @retval None */ -__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -1171,8 +1171,8 @@ HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_Ca */ /** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions - * @brief ADC IO operation functions - * + * @brief ADC IO operation functions + * @verbatim =============================================================================== ##### IO operation functions ##### @@ -1198,7 +1198,7 @@ HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_Ca * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1277,7 +1277,7 @@ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1331,7 +1331,7 @@ HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc) * @param Timeout Timeout value in millisecond. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) { uint32_t tickstart; uint32_t tmp_Flag_End; @@ -1370,12 +1370,12 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Ti tickstart = HAL_GetTick(); /* Wait until End of unitary conversion or sequence conversions flag is raised */ - while((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) { /* Check if timeout is disabled (set to infinite wait) */ - if(Timeout != HAL_MAX_DELAY) + if (Timeout != HAL_MAX_DELAY) { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { /* Update ADC state machine to timeout */ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); @@ -1393,12 +1393,12 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Ti /* Determine whether any further conversion upcoming on group regular */ /* by external trigger, continuous mode or scan sequence on going. */ - if( (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) - && (hadc->Init.ContinuousConvMode == DISABLE) - ) + if ((LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) { /* Check whether end of sequence is reached */ - if( __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS) ) + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) { /* Set ADC state */ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); @@ -1450,7 +1450,7 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Ti * to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout) +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) { uint32_t tickstart; @@ -1462,12 +1462,12 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventTy tickstart = HAL_GetTick(); /* Check selected event flag */ - while(__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) { /* Check if timeout is disabled (set to infinite wait) */ - if(Timeout != HAL_MAX_DELAY) + if (Timeout != HAL_MAX_DELAY) { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { /* Update ADC state machine to timeout */ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); @@ -1480,92 +1480,92 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventTy } } - switch(EventType) + switch (EventType) { - /* End Of Sampling event */ - case ADC_EOSMP_EVENT: - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); + /* End Of Sampling event */ + case ADC_EOSMP_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOSMP); - /* Clear the End Of Sampling flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); + /* Clear the End Of Sampling flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); - break; + break; - /* Analog watchdog (level out of window) event */ - /* Note: In case of several analog watchdog enabled, if needed to know */ - /* which one triggered and on which ADCx, test ADC state of analog watchdog */ - /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ - /* For example: */ - /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ - /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ - /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ + /* Analog watchdog (level out of window) event */ + /* Note: In case of several analog watchdog enabled, if needed to know */ + /* which one triggered and on which ADCx, test ADC state of analog watchdog */ + /* flags HAL_ADC_STATE_AWD1/2/3 using function "HAL_ADC_GetState()". */ + /* For example: */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD1) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD2) != 0UL) " */ + /* " if ((HAL_ADC_GetState(hadc1) & HAL_ADC_STATE_AWD3) != 0UL) " */ - /* Check analog watchdog 1 flag */ - case ADC_AWD_EVENT: - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + /* Check analog watchdog 1 flag */ + case ADC_AWD_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); - /* Clear ADC analog watchdog flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD1); - break; + break; - /* Check analog watchdog 2 flag */ - case ADC_AWD2_EVENT: - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); + /* Check analog watchdog 2 flag */ + case ADC_AWD2_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD2); - /* Clear ADC analog watchdog flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD2); - break; + break; - /* Check analog watchdog 3 flag */ - case ADC_AWD3_EVENT: - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); + /* Check analog watchdog 3 flag */ + case ADC_AWD3_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD3); - /* Clear ADC analog watchdog flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD3); - break; + break; - /* Injected context queue overflow event */ - case ADC_JQOVF_EVENT: - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF); + /* Injected context queue overflow event */ + case ADC_JQOVF_EVENT: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_INJ_JQOVF); - /* Set ADC error code to Injected context queue overflow */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); + /* Set ADC error code to Injected context queue overflow */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_JQOVF); - /* Clear ADC Injected context queue overflow flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JQOVF); + /* Clear ADC Injected context queue overflow flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JQOVF); - break; + break; - /* Overrun event */ - default: /* Case ADC_OVR_EVENT */ - /* If overrun is set to overwrite previous data, overrun event is not */ - /* considered as an error. */ - /* (cf ref manual "Managing conversions without using the DMA and without */ - /* overrun ") */ - if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) - { - /* Set ADC state */ - SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + /* (cf ref manual "Managing conversions without using the DMA and without */ + /* overrun ") */ + if (hadc->Init.Overrun == ADC_OVR_DATA_PRESERVED) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR); - /* Set ADC error code to overrun */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); - } - else - { - /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN - otherwise, data register is potentially overwritten by new converted data as soon - as OVR is cleared. */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); - } - break; + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_OVR_DATA_OVERWRITTEN + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); + } + break; } /* Return function status */ @@ -1590,7 +1590,7 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventTy * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1621,7 +1621,7 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL) { /* Reset ADC error code fields related to regular conversions only */ - CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR|HAL_ADC_ERROR_DMA)); + CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA)); } else { @@ -1642,7 +1642,7 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_EOS | ADC_IT_OVR)); /* Enable ADC end of conversion interrupt */ - switch(hadc->Init.EOCSelection) + switch (hadc->Init.EOCSelection) { case ADC_EOC_SEQ_CONV: __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOS); @@ -1692,7 +1692,7 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1742,7 +1742,7 @@ HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc) * @param Length Number of data to be transferred from ADC peripheral to memory * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length) +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length) { HAL_StatusTypeDef tmp_hal_status; @@ -1846,7 +1846,7 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, ui * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1867,7 +1867,7 @@ HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) /* Disable the DMA channel (in case of DMA in circular mode or stop */ /* while DMA transfer is on going) */ - if(hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) { tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); @@ -1931,7 +1931,7 @@ HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval ADC group regular conversion data */ -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc) +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc) { /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -1948,7 +1948,7 @@ uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) { uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ uint32_t tmp_isr = hadc->Instance->ISR; @@ -1962,7 +1962,7 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); /* ========== Check End of Sampling flag for ADC group regular ========== */ - if(((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) + if (((tmp_isr & ADC_FLAG_EOSMP) == ADC_FLAG_EOSMP) && ((tmp_ier & ADC_IT_EOSMP) == ADC_IT_EOSMP)) { /* Update state machine on end of sampling status if not in error state */ if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) @@ -1979,12 +1979,12 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) #endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ /* Clear regular group conversion flag */ - __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP ); + __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOSMP); } /* ====== Check ADC group regular end of unitary conversion sequence conversions ===== */ - if((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || - (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS)) ) + if ((((tmp_isr & ADC_FLAG_EOC) == ADC_FLAG_EOC) && ((tmp_ier & ADC_IT_EOC) == ADC_IT_EOC)) || + (((tmp_isr & ADC_FLAG_EOS) == ADC_FLAG_EOS) && ((tmp_ier & ADC_IT_EOS) == ADC_IT_EOS))) { /* Update state machine on conversion status if not in error state */ if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) @@ -1996,13 +1996,13 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) /* Determine whether any further conversion upcoming on group regular */ /* by external trigger, continuous mode or scan sequence on going */ /* to disable interruption. */ - if(LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + if (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) { /* Carry on if continuous mode is disabled */ if (READ_BIT (hadc->Instance->CFGR, ADC_CFGR_CONT) != ADC_CFGR_CONT) { /* If End of Sequence is reached, disable interrupts */ - if( __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS) ) + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) { /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ /* ADSTART==0 (no conversion on going) */ @@ -2050,12 +2050,12 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) /* conversion flags clear induces the release of the preserved data.*/ /* Therefore, if the preserved data value is needed, it must be */ /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ - __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS) ); + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); } /* ====== Check ADC group injected end of unitary conversion sequence conversions ===== */ - if( (((tmp_isr & ADC_FLAG_JEOC) == ADC_FLAG_JEOC) && ((tmp_ier & ADC_IT_JEOC) == ADC_IT_JEOC)) || - (((tmp_isr & ADC_FLAG_JEOS) == ADC_FLAG_JEOS) && ((tmp_ier & ADC_IT_JEOS) == ADC_IT_JEOS)) ) + if ((((tmp_isr & ADC_FLAG_JEOC) == ADC_FLAG_JEOC) && ((tmp_ier & ADC_IT_JEOC) == ADC_IT_JEOC)) || + (((tmp_isr & ADC_FLAG_JEOS) == ADC_FLAG_JEOS) && ((tmp_ier & ADC_IT_JEOS) == ADC_IT_JEOS))) { /* Update state machine on conversion status if not in error state */ if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) @@ -2074,13 +2074,13 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) /* group having no further conversion upcoming (same conditions as */ /* regular group interruption disabling above), */ /* and if injected scan sequence is completed. */ - if((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || - ((READ_BIT (tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && - ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && - (READ_BIT (tmp_cfgr, ADC_CFGR_CONT) == 0UL) ) ) ) + if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || + ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && + ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && + (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL)))) { /* If End of Sequence is reached, disable interrupts */ - if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) { /* Particular case if injected contexts queue is enabled: */ /* when the last context has been fully processed, JSQR is reset */ @@ -2088,7 +2088,7 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) /* (queue empty, triggers are ignored), it can start again */ /* immediately after setting a new context (JADSTART is still set). */ /* Therefore, state of HAL ADC injected group is kept to busy. */ - if(READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) { /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */ /* JADSTART==0 (no conversion on going) */ @@ -2257,7 +2257,7 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -2272,7 +2272,7 @@ __weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -2287,7 +2287,7 @@ __weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -2324,8 +2324,8 @@ __weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) */ /** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions - * @brief Peripheral Control functions - * + * @brief Peripheral Control functions + * @verbatim =============================================================================== ##### Peripheral Control functions ##### @@ -2355,7 +2355,7 @@ __weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) * @param sConfig Structure of ADC channel assigned to ADC group regular. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig) +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpOffsetShifted; @@ -2379,7 +2379,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf /* Verification of channel number */ if (sConfig->SingleDiff != ADC_DIFFERENTIAL_ENDED) { - assert_param(IS_ADC_CHANNEL(hadc, sConfig->Channel)); + assert_param(IS_ADC_CHANNEL(hadc, sConfig->Channel)); } else { @@ -2406,7 +2406,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf /* - Channel offset */ tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { @@ -2419,7 +2419,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */ tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, (uint32_t)sConfig->Offset); - if(sConfig->OffsetNumber != ADC_OFFSET_NONE) + if (sConfig->OffsetNumber != ADC_OFFSET_NONE) { /* Set ADC selected offset number */ LL_ADC_SetOffset(hadc->Instance, sConfig->OffsetNumber, sConfig->Channel, tmpOffsetShifted); @@ -2462,7 +2462,9 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf { /* Set sampling time of the selected ADC channel */ /* Note: ADC channel number masked with value "0x1F" to ensure shift value within 32 bits range */ - LL_ADC_SetChannelSamplingTime(hadc->Instance, (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL((__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)sConfig->Channel) + 1UL) & 0x1FUL)), sConfig->SamplingTime); + LL_ADC_SetChannelSamplingTime(hadc->Instance, + (uint32_t)(__LL_ADC_DECIMAL_NB_TO_CHANNEL((__LL_ADC_CHANNEL_TO_DECIMAL_NB((uint32_t)sConfig->Channel) + 1UL) & 0x1FUL)), + sConfig->SamplingTime); } /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ @@ -2568,7 +2570,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConf * @param AnalogWDGConfig Structure of ADC analog watchdog configuration * @retval HAL status */ -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig) +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpAWDHighThresholdShifted; @@ -2582,9 +2584,9 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); - if((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || - (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || - (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) ) + if ((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || + (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)) { assert_param(IS_ADC_CHANNEL(hadc, AnalogWDGConfig->Channel)); } @@ -2615,28 +2617,31 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG /* - Analog watchdog thresholds */ tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { /* Analog watchdog configuration */ - if(AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) + if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) { /* Configuration of analog watchdog: */ /* - Set the analog watchdog enable mode: one or overall group of */ /* channels, on groups regular and-or injected. */ - switch(AnalogWDGConfig->WatchdogMode) + switch (AnalogWDGConfig->WatchdogMode) { case ADC_ANALOGWATCHDOG_SINGLE_REG: - LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR)); + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, + LL_ADC_GROUP_REGULAR)); break; case ADC_ANALOGWATCHDOG_SINGLE_INJEC: - LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_INJECTED)); + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, + LL_ADC_GROUP_INJECTED)); break; case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC: - LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR_INJECTED)); + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, + LL_ADC_GROUP_REGULAR_INJECTED)); break; case ADC_ANALOGWATCHDOG_ALL_REG: @@ -2675,7 +2680,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG LL_ADC_ClearFlag_AWD1(hadc->Instance); /* Configure ADC analog watchdog interrupt */ - if(AnalogWDGConfig->ITMode == ENABLE) + if (AnalogWDGConfig->ITMode == ENABLE) { LL_ADC_EnableIT_AWD1(hadc->Instance); } @@ -2687,7 +2692,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ else { - switch(AnalogWDGConfig->WatchdogMode) + switch (AnalogWDGConfig->WatchdogMode) { case ADC_ANALOGWATCHDOG_SINGLE_REG: case ADC_ANALOGWATCHDOG_SINGLE_INJEC: @@ -2735,7 +2740,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG LL_ADC_ClearFlag_AWD2(hadc->Instance); /* Configure ADC analog watchdog interrupt */ - if(AnalogWDGConfig->ITMode == ENABLE) + if (AnalogWDGConfig->ITMode == ENABLE) { LL_ADC_EnableIT_AWD2(hadc->Instance); } @@ -2757,7 +2762,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG LL_ADC_ClearFlag_AWD3(hadc->Instance); /* Configure ADC analog watchdog interrupt */ - if(AnalogWDGConfig->ITMode == ENABLE) + if (AnalogWDGConfig->ITMode == ENABLE) { LL_ADC_EnableIT_AWD3(hadc->Instance); } @@ -2791,8 +2796,8 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG */ /** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions - * @brief ADC Peripheral State functions - * + * @brief ADC Peripheral State functions + * @verbatim =============================================================================== ##### Peripheral state and errors functions ##### @@ -2817,7 +2822,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDG * @param hadc ADC handle * @retval ADC handle state (bitfield on 32 bits) */ -uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc) +uint32_t HAL_ADC_GetState(ADC_HandleTypeDef *hadc) { /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -2861,7 +2866,7 @@ uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) * @arg @ref ADC_REGULAR_INJECTED_GROUP ADC regular and injected conversion type. * @retval HAL status. */ -HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t ConversionGroup) +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t ConversionGroup) { uint32_t tickstart; uint32_t Conversion_Timeout_CPU_cycles = 0UL; @@ -2878,7 +2883,7 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t Conversio /* groups) to bypass this function if not needed. */ tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (tmp_adc_is_conversion_on_going_regular != 0UL) + if ((tmp_adc_is_conversion_on_going_regular != 0UL) || (tmp_adc_is_conversion_on_going_injected != 0UL) ) { @@ -2888,16 +2893,16 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t Conversio /* injected group stop ADC_CR_JADSTP). */ /* Procedure to be followed: Wait until JEOS=1, clear JEOS, set ADSTP=1 */ /* (see reference manual). */ - if ( ((hadc->Instance->CFGR & ADC_CFGR_JAUTO) != 0UL) - && (hadc->Init.ContinuousConvMode == ENABLE) - && (hadc->Init.LowPowerAutoWait == ENABLE) + if (((hadc->Instance->CFGR & ADC_CFGR_JAUTO) != 0UL) + && (hadc->Init.ContinuousConvMode == ENABLE) + && (hadc->Init.LowPowerAutoWait == ENABLE) ) { /* Use stop of regular group */ conversion_group_reassigned = ADC_REGULAR_GROUP; /* Wait until JEOS=1 (maximum Timeout: 4 injected conversions) */ - while(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS) == 0UL) + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS) == 0UL) { if (Conversion_Timeout_CPU_cycles >= (ADC_CONVERSION_TIME_MAX_CPU_CYCLES * 4UL)) { @@ -2945,16 +2950,16 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t Conversio } /* Selection of start and stop bits with respect to the regular or injected group */ - switch(conversion_group_reassigned) + switch (conversion_group_reassigned) { - case ADC_REGULAR_INJECTED_GROUP: + case ADC_REGULAR_INJECTED_GROUP: tmp_ADC_CR_ADSTART_JADSTART = (ADC_CR_ADSTART | ADC_CR_JADSTART); break; - case ADC_INJECTED_GROUP: + case ADC_INJECTED_GROUP: tmp_ADC_CR_ADSTART_JADSTART = ADC_CR_JADSTART; break; - /* Case ADC_REGULAR_GROUP only*/ - default: + /* Case ADC_REGULAR_GROUP only*/ + default: tmp_ADC_CR_ADSTART_JADSTART = ADC_CR_ADSTART; break; } @@ -2962,9 +2967,9 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t Conversio /* Wait for conversion effectively stopped */ tickstart = HAL_GetTick(); - while((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL) + while ((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL) { - if((HAL_GetTick()-tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); @@ -2991,7 +2996,7 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef* hadc, uint32_t Conversio * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) { uint32_t tickstart; @@ -3019,7 +3024,7 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) /* Wait for ADC effectively enabled */ tickstart = HAL_GetTick(); - while(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) { /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit has been cleared (after a calibration), ADEN bit is reset by the @@ -3029,12 +3034,12 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) 4 ADC clock cycle duration */ /* Note: Test of ADC enabled required due to hardware constraint to */ /* not enable ADC if already enabled. */ - if(LL_ADC_IsEnabled(hadc->Instance) == 0UL) + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) { LL_ADC_Enable(hadc->Instance); } - if((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); @@ -3058,7 +3063,7 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) { uint32_t tickstart; const uint32_t tmp_adc_is_disable_on_going = LL_ADC_IsDisableOngoing(hadc->Instance); @@ -3066,12 +3071,12 @@ HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc) /* Verification if ADC is not already disabled: */ /* Note: forbidden to disable ADC (set bit ADC_CR_ADDIS) if ADC is already */ /* disabled. */ - if ( (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) && (tmp_adc_is_disable_on_going == 0UL) ) { /* Check if conditions to disable the ADC are fulfilled */ - if((hadc->Instance->CR & (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) + if ((hadc->Instance->CR & (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) { /* Disable the ADC peripheral */ LL_ADC_Disable(hadc->Instance); @@ -3092,9 +3097,9 @@ HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc) /* Get tick count */ tickstart = HAL_GetTick(); - while((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + while ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) { - if((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) + if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); @@ -3119,10 +3124,10 @@ HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef* hadc) void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) { /* Retrieve ADC handle corresponding to current DMA handle */ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Update state machine on conversion status if not in error state */ - if((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) { /* Set ADC state */ SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); @@ -3134,14 +3139,14 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) if ((hadc->Instance->ISR & ADC_FLAG_EOS) != 0UL) { /* Are conversions software-triggered ? */ - if(LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + if (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) { /* Is CONT bit set ? */ - if(READ_BIT(hadc->Instance->CFGR, ADC_CFGR_CONT) == 0UL) + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_CONT) == 0UL) { /* CONT bit is not set, no more conversions expected */ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - if((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) { SET_BIT(hadc->State, HAL_ADC_STATE_READY); } @@ -3152,11 +3157,11 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) { /* DMA End of Transfer interrupt was triggered but conversions sequence is not over. If DMACFG is set to 0, conversions are stopped. */ - if(READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMACFG) == 0UL) + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMACFG) == 0UL) { /* DMACFG bit is not set, conversions are stopped. */ CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY); - if((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) + if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) == 0UL) { SET_BIT(hadc->State, HAL_ADC_STATE_READY); } @@ -3197,7 +3202,7 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) { /* Retrieve ADC handle corresponding to current DMA handle */ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Half conversion callback */ #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) @@ -3215,7 +3220,7 @@ void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) void ADC_DMAError(DMA_HandleTypeDef *hdma) { /* Retrieve ADC handle corresponding to current DMA handle */ - ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Set ADC state */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c index 835f7da..1327585 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c @@ -121,7 +121,7 @@ * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff) +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff) { HAL_StatusTypeDef tmp_hal_status; __IO uint32_t wait_loop_index = 0UL; @@ -150,7 +150,7 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t LL_ADC_StartCalibration(hadc->Instance, SingleDiff); /* Wait for calibration completion */ - while(LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) + while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) { wait_loop_index++; if (wait_loop_index >= ADC_CALIBRATION_TIMEOUT) @@ -195,14 +195,14 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended * @retval Calibration value. */ -uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff) +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff) { /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff)); /* Return the selected ADC calibration value */ - return LL_ADC_GetCalibrationFactor(hadc->Instance, SingleDiff); + return LL_ADC_GetCalibrationFactor(hadc->Instance, SingleDiff); } /** @@ -215,7 +215,7 @@ uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef* hadc, uint32_t Single * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) * @retval HAL state */ -HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff, uint32_t CalibrationFactor) +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmp_adc_is_conversion_on_going_regular; @@ -234,7 +234,7 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32 tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (LL_ADC_IsEnabled(hadc->Instance) != 0UL) + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) && (tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) @@ -266,7 +266,7 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32 * @param hadc ADC handle. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; uint32_t tmp_config_injected_queue; @@ -289,7 +289,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) the queue is empty */ tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); - if ( (READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) + if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) && (tmp_config_injected_queue == 0UL) ) { @@ -367,7 +367,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc) * @param hadc ADC handle. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -422,7 +422,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc) * checked and cleared depending on AUTDLY bit status. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout) +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) { uint32_t tickstart; uint32_t tmp_Flag_End; @@ -446,13 +446,13 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, u /* Get timeout */ tickstart = HAL_GetTick(); - /* Wait until End of Conversion or Sequence flag is raised */ - while((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + /* Wait until End of Conversion or Sequence flag is raised */ + while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) { /* Check if timeout is disabled (set to infinite wait) */ - if(Timeout != HAL_MAX_DELAY) + if (Timeout != HAL_MAX_DELAY) { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { /* Update ADC state machine to timeout */ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); @@ -476,13 +476,13 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, u /* Determine whether any further conversion upcoming on group injected */ /* by external trigger or by automatic injected conversion */ /* from group regular. */ - if((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || - ((READ_BIT (tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && - ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && - (READ_BIT (tmp_cfgr, ADC_CFGR_CONT) == 0UL) ) ) ) + if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || + ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && + ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && + (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL)))) { /* Check whether end of sequence is reached */ - if( __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS) ) + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) { /* Particular case if injected contexts queue is enabled: */ /* when the last context has been fully processed, JSQR is reset */ @@ -490,12 +490,12 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, u /* (queue empty, triggers are ignored), it can start again */ /* immediately after setting a new context (JADSTART is still set). */ /* Therefore, state of HAL ADC injected group is kept to busy. */ - if(READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) { /* Set ADC state */ CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); - if((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) { SET_BIT(hadc->State, HAL_ADC_STATE_READY); } @@ -531,7 +531,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, u * @param hadc ADC handle. * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; uint32_t tmp_config_injected_queue; @@ -554,7 +554,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) the queue is empty */ tmp_config_injected_queue = READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQDIS); - if ( (READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) + if ((READ_BIT(hadc->Instance->JSQR, ADC_JSQR_JEXTEN) == 0UL) && (tmp_config_injected_queue == 0UL) ) { @@ -607,7 +607,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) } /* Enable ADC end of conversion interrupt */ - switch(hadc->Init.EOCSelection) + switch (hadc->Init.EOCSelection) { case ADC_EOC_SEQ_CONV: __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC); @@ -655,7 +655,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -734,7 +734,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc) * @arg @ref ADC_INJECTED_RANK_4 ADC group injected rank 4 * @retval ADC group injected conversion data */ -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank) +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank) { uint32_t tmp_jdr; @@ -743,7 +743,7 @@ uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRa assert_param(IS_ADC_INJECTED_RANK(InjectedRank)); /* Get ADC converted value */ - switch(InjectedRank) + switch (InjectedRank) { case ADC_INJECTED_RANK_4: tmp_jdr = hadc->Instance->JDR4; @@ -769,7 +769,7 @@ uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRa * @param hadc ADC handle * @retval None */ -__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -788,7 +788,7 @@ __weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -803,7 +803,7 @@ __weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -818,7 +818,7 @@ __weak void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -834,7 +834,7 @@ __weak void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval None */ -__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef* hadc) +__weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hadc); @@ -851,7 +851,7 @@ __weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -909,7 +909,7 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -966,7 +966,7 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status. */ -HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1094,7 +1094,7 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef* hadc) * injected group. * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected) +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_InjectionConfTypeDef *sConfigInjected) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpOffsetShifted; @@ -1117,7 +1117,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), sConfigInjected->InjectedOffset)); assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjecOversamplingMode)); - if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) { assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank)); assert_param(IS_ADC_INJECTED_NB_CONV(sConfigInjected->InjectedNbrOfConversion)); @@ -1138,7 +1138,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* Verification of channel number */ if (sConfigInjected->InjectedSingleDiff != ADC_DIFFERENTIAL_ENDED) { - assert_param(IS_ADC_CHANNEL(hadc, sConfigInjected->InjectedChannel)); + assert_param(IS_ADC_CHANNEL(hadc, sConfigInjected->InjectedChannel)); } else { @@ -1170,7 +1170,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* by software for alignment over all STM32 devices. */ if ((hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) || - (sConfigInjected->InjectedNbrOfConversion == 1U) ) + (sConfigInjected->InjectedNbrOfConversion == 1U)) { /* Configuration of context register JSQR: */ /* - number of ranks in injected group sequencer: fixed to 1st rank */ @@ -1188,14 +1188,14 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* software start. */ if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) { - tmp_JSQR_ContextQueueBeingBuilt = ( ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1) - | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) - | sConfigInjected->ExternalTrigInjecConvEdge - ); + tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1) + | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) + | sConfigInjected->ExternalTrigInjecConvEdge + ); } else { - tmp_JSQR_ContextQueueBeingBuilt = ( ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1) ); + tmp_JSQR_ContextQueueBeingBuilt = (ADC_JSQR_RK(sConfigInjected->InjectedChannel, ADC_INJECTED_RANK_1)); } MODIFY_REG(hadc->Instance->JSQR, ADC_JSQR_FIELDS, tmp_JSQR_ContextQueueBeingBuilt); @@ -1224,7 +1224,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* Handle hadc saves the context under build up over each HAL_ADCEx_InjectedConfigChannel() call, this context will be written in JSQR register at the last call. At this point, the context is merely reset */ - hadc->InjectionConfig.ContextQueue = 0x00000000U; + hadc->InjectionConfig.ContextQueue = 0x00000000U; /* Configuration of context register JSQR: */ /* - number of ranks in injected group sequencer */ @@ -1238,14 +1238,14 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* software start. */ if (sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START) { - tmp_JSQR_ContextQueueBeingBuilt = ( (sConfigInjected->InjectedNbrOfConversion - 1U) - | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) - | sConfigInjected->ExternalTrigInjecConvEdge - ); + tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U) + | (sConfigInjected->ExternalTrigInjecConv & ADC_JSQR_JEXTSEL) + | sConfigInjected->ExternalTrigInjecConvEdge + ); } else { - tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U) ); + tmp_JSQR_ContextQueueBeingBuilt = ((sConfigInjected->InjectedNbrOfConversion - 1U)); } } @@ -1289,7 +1289,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_JQM | ADC_CFGR_JDISCEN, ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext) | - ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)sConfigInjected->InjectedDiscontinuousConvMode) ); + ADC_CFGR_INJECT_DISCCONTINUOUS((uint32_t)sConfigInjected->InjectedDiscontinuousConvMode)); } /* If auto-injected mode is enabled: Injected discontinuous setting is */ /* discarded. */ @@ -1297,7 +1297,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I { MODIFY_REG(hadc->Instance->CFGR, ADC_CFGR_JQM | ADC_CFGR_JDISCEN, - ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext) ); + ADC_CFGR_INJECT_CONTEXT_QUEUE((uint32_t)sConfigInjected->QueueInjectedContext)); } } @@ -1312,23 +1312,23 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { /* If injected group external triggers are disabled (set to injected */ /* software start): no constraint */ if ((sConfigInjected->ExternalTrigInjecConv == ADC_INJECTED_SOFTWARE_START) - || (sConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE)) + || (sConfigInjected->ExternalTrigInjecConvEdge == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE)) { - if (sConfigInjected->AutoInjectedConv == ENABLE) - { - SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); - } - else - { - CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); - } + if (sConfigInjected->AutoInjectedConv == ENABLE) + { + SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); + } + else + { + CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_JAUTO); + } } /* If Automatic injected conversion was intended to be set and could not */ /* due to injected group external triggers enabled, error is reported. */ @@ -1353,26 +1353,26 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I assert_param(IS_ADC_RIGHT_BIT_SHIFT(sConfigInjected->InjecOversampling.RightBitShift)); /* JOVSE must be reset in case of triggered regular mode */ - assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE|ADC_CFGR2_TROVS) == (ADC_CFGR2_ROVSE|ADC_CFGR2_TROVS))); + assert_param(!(READ_BIT(hadc->Instance->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS) == (ADC_CFGR2_ROVSE | ADC_CFGR2_TROVS))); /* Configuration of Injected Oversampler: */ /* - Oversampling Ratio */ /* - Right bit shift */ /* Enable OverSampling mode */ - MODIFY_REG(hadc->Instance->CFGR2, - ADC_CFGR2_JOVSE | - ADC_CFGR2_OVSR | - ADC_CFGR2_OVSS, - ADC_CFGR2_JOVSE | - sConfigInjected->InjecOversampling.Ratio | - sConfigInjected->InjecOversampling.RightBitShift - ); + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_JOVSE | + ADC_CFGR2_OVSR | + ADC_CFGR2_OVSS, + ADC_CFGR2_JOVSE | + sConfigInjected->InjecOversampling.Ratio | + sConfigInjected->InjecOversampling.RightBitShift + ); } else { /* Disable Regular OverSampling */ - CLEAR_BIT( hadc->Instance->CFGR2, ADC_CFGR2_JOVSE); + CLEAR_BIT(hadc->Instance->CFGR2, ADC_CFGR2_JOVSE); } /* Set sampling time of the selected ADC channel */ @@ -1384,10 +1384,11 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0 */ tmpOffsetShifted = ADC_OFFSET_SHIFT_RESOLUTION(hadc, sConfigInjected->InjectedOffset); - if(sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) + if (sConfigInjected->InjectedOffsetNumber != ADC_OFFSET_NONE) { /* Set ADC selected offset number */ - LL_ADC_SetOffset(hadc->Instance, sConfigInjected->InjectedOffsetNumber, sConfigInjected->InjectedChannel, tmpOffsetShifted); + LL_ADC_SetOffset(hadc->Instance, sConfigInjected->InjectedOffsetNumber, sConfigInjected->InjectedChannel, + tmpOffsetShifted); } else @@ -1396,19 +1397,19 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I /* If this is the case, the corresponding offset number is disabled. */ if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_1)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel)) { - LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE); + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_1, LL_ADC_OFFSET_DISABLE); } if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_2)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel)) { - LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE); + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_2, LL_ADC_OFFSET_DISABLE); } if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_3)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel)) { - LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE); + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_3, LL_ADC_OFFSET_DISABLE); } if(__LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_GetOffsetChannel(hadc->Instance, LL_ADC_OFFSET_4)) == __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfigInjected->InjectedChannel)) { - LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE); + LL_ADC_SetOffsetState(hadc->Instance, LL_ADC_OFFSET_4, LL_ADC_OFFSET_DISABLE); } } @@ -1515,7 +1516,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_I * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; uint32_t tmp_adc_is_conversion_on_going_regular; @@ -1528,7 +1529,7 @@ HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef* hadc) tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); /* Parameter can be set only if no conversion is on-going */ - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { @@ -1556,7 +1557,7 @@ HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; uint32_t tmp_adc_is_conversion_on_going_regular; @@ -1569,7 +1570,7 @@ HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef* hadc) tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); /* Parameter can be set only if no conversion is on-going */ - if ( (tmp_adc_is_conversion_on_going_regular == 0UL) + if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) { @@ -1593,7 +1594,7 @@ HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; @@ -1630,7 +1631,7 @@ HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef* hadc) * @param hadc ADC handle * @retval HAL status */ -HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef* hadc) +HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c index 03b4bd7..a113b0d 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c @@ -168,7 +168,7 @@ #ifdef HAL_COMP_MODULE_ENABLED - +#if defined (COMP1) || defined (COMP2) /** @defgroup COMP COMP * @brief COMP HAL module driver @@ -981,7 +981,7 @@ uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp) * @} */ - +#endif /* COMP1 || COMP2 */ #endif /* HAL_COMP_MODULE_ENABLED */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c index b8686ef..1e8fe2c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c @@ -189,13 +189,15 @@ (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. *** Callback registration *** - ============================================= + ============================= + [..] The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. Use Functions @ref HAL_CRYP_RegisterCallback() or HAL_CRYP_RegisterXXXCallback() to register an interrupt callback. + [..] Function @ref HAL_CRYP_RegisterCallback() allows to register following callbacks: (+) InCpltCallback : Input FIFO transfer completed callback. (+) OutCpltCallback : Output FIFO transfer completed callback. @@ -205,6 +207,7 @@ This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. + [..] Use function @ref HAL_CRYP_UnRegisterCallback() to reset a callback to the default weak function. @ref HAL_CRYP_UnRegisterCallback() takes as parameters the HAL peripheral handle, @@ -216,6 +219,7 @@ (+) MspInitCallback : CRYP MspInit. (+) MspDeInitCallback : CRYP MspDeInit. + [..] By default, after the @ref HAL_CRYP_Init() and when the state is HAL_CRYP_STATE_RESET all callbacks are set to the corresponding weak functions : examples @ref HAL_CRYP_InCpltCallback() , @ref HAL_CRYP_OutCpltCallback(). @@ -225,6 +229,7 @@ if not, MspInit or MspDeInit are not null, the @ref HAL_CRYP_Init() / @ref HAL_CRYP_DeInit() keep and use the user MspInit/MspDeInit functions (registered beforehand) + [..] Callbacks can be registered/unregistered in HAL_CRYP_STATE_READY state only. Exception done MspInit/MspDeInit callbacks that can be registered/unregistered in HAL_CRYP_STATE_READY or HAL_CRYP_STATE_RESET state, @@ -233,14 +238,16 @@ using @ref HAL_CRYP_RegisterCallback() before calling @ref HAL_CRYP_DeInit() or @ref HAL_CRYP_Init() function. + [..] When The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS is set to 0 or not defined, the callback registration feature is not available and all callbacks are set to the corresponding weak functions. *** Suspend/Resume feature *** - ============================================= + ============================== + [..] The compilation define USE_HAL_CRYP_SUSPEND_RESUME when set to 1 allows the user to resort to the suspend/resume feature. A low priority block processing can be suspended to process a high priority block @@ -915,11 +922,15 @@ void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp) */ HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) { + HAL_CRYP_STATETypeDef state; + /* Request suspension */ HAL_CRYP_ProcessSuspend(hcryp); - while ((HAL_CRYP_GetState(hcryp) != HAL_CRYP_STATE_SUSPENDED) && \ - (HAL_CRYP_GetState(hcryp) != HAL_CRYP_STATE_READY)); + do + { + state = HAL_CRYP_GetState(hcryp); + } while ((state != HAL_CRYP_STATE_SUSPENDED) && (state != HAL_CRYP_STATE_READY)); if (HAL_CRYP_GetState(hcryp) == HAL_CRYP_STATE_READY) { @@ -953,7 +964,8 @@ HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) hcryp->CrypOutCount_saved = hcryp->CrypOutCount; hcryp->Phase_saved = hcryp->Phase; hcryp->State_saved = hcryp->State; - hcryp->Size_saved = ( (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? hcryp->Size /4 : hcryp->Size); + hcryp->Size_saved = ( (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? (hcryp->Size /4U) : hcryp->Size); + hcryp->SizesSum_saved = hcryp->SizesSum; hcryp->AutoKeyDerivation_saved = hcryp->AutoKeyDerivation; hcryp->CrypHeaderCount_saved = hcryp->CrypHeaderCount; hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; @@ -983,6 +995,12 @@ HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) */ HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) { + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + if (hcryp->State_saved != HAL_CRYP_STATE_SUSPENDED) { /* CRYP was not suspended */ @@ -1009,16 +1027,14 @@ HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) hcryp->Init.pInitVect = hcryp->IV_saved; } __HAL_CRYP_DISABLE(hcryp); - if (HAL_CRYP_Init(hcryp) != HAL_OK) - { - return HAL_ERROR; - } + (void) HAL_CRYP_Init(hcryp); } else /* Authentication algorithms case */ { /* Restore low-priority block CRYP handle parameters */ hcryp->Phase = hcryp->Phase_saved; hcryp->CrypHeaderCount = hcryp->CrypHeaderCount_saved; + hcryp->SizesSum = hcryp->SizesSum_saved; /* Disable AES and write-back SUSPxR registers */; __HAL_CRYP_DISABLE(hcryp); @@ -1028,8 +1044,6 @@ HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) hcryp->Instance->CR = hcryp->CR_saved; CRYP_Write_KeyRegisters(hcryp, hcryp->Key_saved, hcryp->Init.KeySize); CRYP_Write_IVRegisters(hcryp, hcryp->IV_saved); - __HAL_CRYP_ENABLE_IT(hcryp,CRYP_IT_CCFIE | CRYP_IT_ERRIE); - __HAL_CRYP_ENABLE(hcryp); /* At the same time, set handle state back to READY to be able to resume the AES calculations without the processing APIs returning HAL_BUSY when called. */ @@ -1180,6 +1194,12 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, u { uint32_t algo; HAL_StatusTypeDef status; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -1274,6 +1294,12 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, u { HAL_StatusTypeDef status; uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -1367,6 +1393,12 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input { HAL_StatusTypeDef status; uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -1383,8 +1415,8 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input hcryp->ResumingFlag = 0U; if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) { - hcryp->CrypInCount = hcryp->CrypInCount_saved; - hcryp->CrypOutCount = hcryp->CrypOutCount_saved; + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; } else { @@ -1471,6 +1503,12 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input { HAL_StatusTypeDef status; uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -1487,8 +1525,8 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input hcryp->ResumingFlag = 0U; if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) { - hcryp->CrypInCount = hcryp->CrypInCount_saved; - hcryp->CrypOutCount = hcryp->CrypOutCount_saved; + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; } else { @@ -1575,6 +1613,12 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Inpu HAL_StatusTypeDef status; uint32_t algo; uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -1695,6 +1739,12 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Inpu { HAL_StatusTypeDef status; uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif if (hcryp->State == HAL_CRYP_STATE_READY) { @@ -5015,7 +5065,7 @@ static void CRYP_Read_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Outp __IO uint32_t count = 0U; /* In case of GCM payload phase encryption, check that suspension can be carried out */ - if (READ_BIT(hcryp->Instance->CR, (AES_CR_CHMOD|AES_CR_GCMPH|AES_CR_MODE)) == (CRYP_AES_GCM_GMAC|AES_CR_GCMPH_1|0x0)) + if (READ_BIT(hcryp->Instance->CR, (AES_CR_CHMOD|AES_CR_GCMPH|AES_CR_MODE)) == (CRYP_AES_GCM_GMAC|AES_CR_GCMPH_1|0x0U)) { /* Wait for BUSY flag to be cleared */ @@ -5153,21 +5203,21 @@ static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input, if (KeySize == CRYP_KEYSIZE_256B) { hcryp->Instance->KEYR7 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR6 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR5 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR4 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; } hcryp->Instance->KEYR3 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR2 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR1 = *(uint32_t*)(keyaddr); - keyaddr+=4; + keyaddr+=4U; hcryp->Instance->KEYR0 = *(uint32_t*)(keyaddr); } @@ -5179,9 +5229,19 @@ static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input, */ static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) { - uint32_t loopcounter = 0U; - uint32_t lastwordsize =0; - uint32_t npblb = 0U ; + uint32_t loopcounter; + uint16_t lastwordsize; + uint16_t npblb; + uint32_t cr_temp; + + + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR | CRYP_CCF_CLEAR); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); /* Case of header phase resumption =================================================*/ if (hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) @@ -5192,7 +5252,7 @@ static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) /* Select header phase */ CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - if (((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount) >= 4U)) + if ((((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount)) >= 4U)) { /* Write the input block in the IN FIFO */ hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount ); @@ -5221,73 +5281,77 @@ static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) } } /* Case of payload phase resumption =================================================*/ - else if (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED) + else { + if (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED) + { - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; - /* Select payload phase once the header phase is performed */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); - /* Set to 0 the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); - if ((hcryp->Size/4) - (hcryp->CrypInCount) >= 4U) - { - /* Write the input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); - hcryp->CrypInCount++; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); - hcryp->CrypInCount++; - if((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) + if (((hcryp->Size/4U) - (hcryp->CrypInCount)) >= 4U) { - /* Call output transfer complete callback */ + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + if((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) + { + /* Call output transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); #else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } } - } - else /* Last block of payload < 128bit*/ - { - /* Compute the number of padding bytes in last block of payload */ - npblb = ((hcryp->Size/16U)+1U)*16U- (hcryp->Size); - if((((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || - (((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + else /* Last block of payload < 128bit*/ { - /* Specify the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb<< 20U); - } + /* Compute the number of padding bytes in last block of payload */ + npblb = (((hcryp->Size/16U)+1U)*16U) - (hcryp->Size); + cr_temp = hcryp->Instance->CR; + if((((cr_temp & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + (((cr_temp& AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, ((uint32_t)npblb)<< 20U); + } - /* Number of valid words (lastwordsize) in last block */ - if (npblb % 4U ==0U) - { - lastwordsize = (16U-npblb)/4U; - } - else - { - lastwordsize = (16U-npblb)/4U +1U; - } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) ==0U) + { + lastwordsize = (16U-npblb)/4U; + } + else + { + lastwordsize = ((16U-npblb)/4U) +1U; + } - /* Last block optionally pad the data with zeros*/ - for(loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) - { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); - hcryp->CrypInCount++; - } - while(loopcounter < 4U ) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; - loopcounter++; + /* Last block optionally pad the data with zeros*/ + for(loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount ); + hcryp->CrypInCount++; + } + while(loopcounter < 4U ) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } } } } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c index 61cf7fa..c1ed560 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c @@ -18,17 +18,15 @@ necessary). Please refer to the Reference manual for connection between peripherals and DMA requests. - __HAL_RCC_DMAMUX1_CLK_ENABLE - (#) For a given Channel, program the required configuration through the following parameters: Channel request, Transfer Direction, Source and Destination data formats, Circular or Normal mode, Channel Priority level, Source and Destination Increment mode using HAL_DMA_Init() function. - Prior to HAL_DMA_Init the CLK shall be enabled for both DMA & DMAMUX + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX thanks to: - DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; - DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; + (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error detection. @@ -36,6 +34,7 @@ (#) Use HAL_DMA_Abort() function to abort the current transfer -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + *** Polling mode IO operation *** ================================= [..] @@ -54,13 +53,12 @@ In this case the DMA interrupt is configured (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e. a member of DMA handle structure). + add his own function to register callbacks with HAL_DMA_RegisterCallback(). *** DMA HAL driver macros list *** ============================================= [..] - Below the list of most used macros in DMA HAL driver. + Below the list of macros in DMA HAL driver. (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. @@ -68,7 +66,7 @@ (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. [..] (@) You can refer to the DMA HAL driver header file for more useful macros @@ -172,19 +170,25 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); +#if defined(DMA2) /* Compute the channel index */ if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) { /* DMA1 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; hdma->DmaBaseAddress = DMA1; } else { /* DMA2 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; hdma->DmaBaseAddress = DMA2; } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; +#endif /* Change DMA peripheral state */ hdma->State = HAL_DMA_STATE_BUSY; @@ -263,6 +267,7 @@ HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) */ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) { + /* Check the DMA handle allocation */ if (NULL == hdma) { @@ -275,19 +280,25 @@ HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) /* Disable the selected DMA Channelx */ __HAL_DMA_DISABLE(hdma); +#if defined(DMA2) /* Compute the channel index */ if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) { /* DMA1 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; hdma->DmaBaseAddress = DMA1; } else { /* DMA2 */ - hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; hdma->DmaBaseAddress = DMA2; } +#else + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; +#endif /* Reset DMA Channel control register */ hdma->Instance->CCR = 0U; @@ -645,9 +656,9 @@ HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_Level /* Get tick */ tickstart = HAL_GetTick(); - while (0U == (hdma->DmaBaseAddress->ISR & temp)) + while((hdma->DmaBaseAddress->ISR & temp) == 0U) { - if ((0U != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1cU))))) + if((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex& 0x1CU))) != 0U) { /* When a DMA transfer error occurs */ /* A hardware clear of its EN bits is performed */ @@ -753,7 +764,7 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); } /* Clear the half transfer complete flag */ - hdma->DmaBaseAddress->IFCR = (DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1cU)); + hdma->DmaBaseAddress->IFCR = (DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU)); /* DMA peripheral state is not updated in Half Transfer */ /* but in Transfer Complete case */ @@ -766,7 +777,7 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) } /* Transfer Complete Interrupt management ***********************************/ - else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU)))) && (0U != (source_it & DMA_IT_TC))) + else if (((flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU))) != 0U) && ((source_it & DMA_IT_TC) != 0U)) { if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) { @@ -956,7 +967,7 @@ HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_Ca */ /** - * @brief Return the DMA hande state. + * @brief Return the DMA handle state. * @param hdma Pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA Channel. * @retval HAL state @@ -1016,7 +1027,7 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t /* Configure DMA Channel data length */ hdma->Instance->CNDTR = DataLength; - /* Peripheral to Memory */ + /* Memory to Peripheral */ if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) { /* Configure DMA Channel destination address */ @@ -1025,7 +1036,7 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t /* Configure DMA Channel source address */ hdma->Instance->CMAR = SrcAddress; } - /* Memory to Peripheral */ + /* Peripheral to Memory */ else { /* Configure DMA Channel source address */ @@ -1037,9 +1048,9 @@ static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t } /** - * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on stream number + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. + * the configuration information for the specified DMA Channel. * @retval None */ static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) @@ -1047,6 +1058,7 @@ static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) uint32_t channel_number; /* check if instance is not outside the DMA channel range */ +#if defined(DMA2) if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) { /* DMA1 */ @@ -1057,6 +1069,10 @@ static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) /* DMA2 */ hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); } +#else + /* DMA1 */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); +#endif channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1cU); @@ -1065,7 +1081,7 @@ static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) /** * @brief Updates the DMA handle with the DMAMUX request generator params * @param hdma Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Stream. + * the configuration information for the specified DMA Channel. * @retval None */ @@ -1078,7 +1094,7 @@ static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; - /* here "Request" is either DMA_REQUEST_GENERATOR0 to 4, i.e. <= 4*/ + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c index f1049d6..121b49d 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c @@ -76,8 +76,8 @@ =============================================================================== [..] This section provides functions allowing to: - (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. - (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used to respectively enable/disable the request generator. diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c index 237ce6b..57db37d 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c @@ -269,7 +269,7 @@ HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, u pFlash.Address = Address; /* Enable End of Operation and Error interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR | FLASH_IT_ECCC); + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); if (TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) { @@ -302,13 +302,11 @@ void HAL_FLASH_IRQHandler(void) uint32_t param = 0xFFFFFFFFU; uint32_t error; - /* Save flash errors. Only ECC detection can be checked here as ECCC - generates NMI */ - error = (FLASH->SR & FLASH_FLAG_SR_ERROR); + /* Check FLASH operation error flags */ + error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); /* Clear Current operation */ CLEAR_BIT(FLASH->CR, pFlash.ProcedureOnGoing); - error |= (FLASH->ECCR & FLASH_FLAG_ECCC); /* A] Set parameter for user or error callbacks */ /* check operation was a program or erase */ @@ -317,9 +315,9 @@ void HAL_FLASH_IRQHandler(void) /* return adress being programmed */ param = pFlash.Address; } - else if ((pFlash.ProcedureOnGoing & (FLASH_TYPEERASE_MASSERASE | FLASH_TYPEERASE_PAGES)) != 0U) + else if ((pFlash.ProcedureOnGoing & (FLASH_TYPEERASE_PAGES)) != 0U) { - /* return page number being erased (0 for mass erase) */ + /* return page number being erased */ param = pFlash.Page; } else @@ -381,7 +379,7 @@ void HAL_FLASH_IRQHandler(void) if (pFlash.ProcedureOnGoing == FLASH_TYPENONE) { /* Disable End of Operation and Error interrupts */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR | FLASH_IT_ECCC); + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); /* Process Unlocked */ __HAL_UNLOCK(&pFlash); @@ -391,7 +389,6 @@ void HAL_FLASH_IRQHandler(void) /** * @brief FLASH end of operation interrupt callback. * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: 0 * Page Erase: Page which has been erased * Program: Address which was selected for data program * @retval None @@ -409,7 +406,6 @@ __weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) /** * @brief FLASH operation error interrupt callback. * @param ReturnValue The value saved in this parameter depends on the ongoing procedure - * Mass Erase: 0 * Page Erase: Page number which returned an error * Program: Address which was selected for data program * @retval None @@ -581,7 +577,6 @@ HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) * @arg @ref HAL_FLASH_ERROR_FAST FLASH Fast programming error * @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error (PCROP) * @arg @ref HAL_FLASH_ERROR_OPTV FLASH Option validity error - * @arg @ref HAL_FLASH_ERROR_ECCD FLASH two ECC errors have been detected */ uint32_t HAL_FLASH_GetError(void) { @@ -623,8 +618,7 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) } } - /* check flash errors. Only ECC correction can be checked here as ECCD - generates NMI */ + /* Check FLASH operation error flags */ error = FLASH->SR; /* Check FLASH End of Operation flag */ @@ -635,10 +629,7 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) } /* Now update error variable to only error value */ - error &= FLASH_FLAG_SR_ERROR; - - /* Update error with ECC error value */ - error |= (FLASH->ECCR & FLASH_FLAG_ECCC); + error &= FLASH_FLAG_SR_ERRORS; /* clear error flags */ __HAL_FLASH_CLEAR_FLAG(error); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c index 14976bb..ce93882 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c @@ -98,7 +98,6 @@ /** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions * @{ */ -static void FLASH_MassErase(void); static void FLASH_AcknowledgePageErase(void); static void FLASH_FlushCaches(void); static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); @@ -139,7 +138,7 @@ static HAL_StatusTypeDef FLASH_OB_ProceedWriteOperation(void); * @{ */ /** - * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @brief Perform an erase of the specified FLASH memory pages. * @note Before any operation, it is possible to check there is no operation suspended * by call HAL_FLASHEx_IsOperationSuspended() * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that @@ -168,17 +167,7 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t if (status == HAL_OK) { - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /* Mass erase to be done */ - FLASH_MassErase(); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); - - /* If operation is completed or interrupted, no need to clear the Mass Erase Bit */ - } - else + if (pEraseInit->TypeErase == FLASH_TYPEERASE_PAGES) { /*Initialization of PageError variable*/ *PageError = 0xFFFFFFFFU; @@ -214,7 +203,7 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t } /** - * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @brief Perform an erase of the specified FLASH memory pages with interrupt enabled. * @note Before any operation, it is possible to check there is no operation suspended * by call HAL_FLASHEx_IsOperationSuspended() * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that @@ -250,15 +239,7 @@ HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) /* Enable End of Operation and Error interrupts */ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /* Set Page to 0 for Interrupt callback managment */ - pFlash.Page = 0; - - /* Proceed to Mass Erase */ - FLASH_MassErase(); - } - else + if (pEraseInit->TypeErase == FLASH_TYPEERASE_PAGES) { /* Erase by page to be done */ pFlash.NbPagesToErase = pEraseInit->NbPages; @@ -513,16 +494,6 @@ uint32_t HAL_FLASHEx_IsOperationSuspended(void) * @{ */ -/** - * @brief Mass erase of FLASH memory. - * @retval None - */ -static void FLASH_MassErase(void) -{ - /* Set the Mass Erase Bit and start bit */ - SET_BIT(FLASH->CR, (FLASH_CR_MER | FLASH_CR_STRT)); -} - /** * @brief Erase the specified FLASH memory page. * @param Page FLASH page to erase diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c index 85d7360..ba71ef5 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c @@ -188,26 +188,6 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) if (iocurrent != 0x00u) { /*--------------------- GPIO Mode Configuration ------------------------*/ - /* In case of Alternate function mode selection */ - if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) - { - /* Check the Alternate function parameters */ - assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); - assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); - - /* Configure Alternate function mapped with the current IO */ - temp = GPIOx->AFR[position >> 3u]; - temp &= ~(0xFu << ((position & 0x07u) * 4u)); - temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); - GPIOx->AFR[position >> 3u] = temp; - } - - /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ - temp = GPIOx->MODER; - temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); - temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); - GPIOx->MODER = temp; - /* In case of Output or Alternate function mode selection */ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) @@ -233,6 +213,26 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) temp |= ((GPIO_Init->Pull) << (position * 2u)); GPIOx->PUPDR = temp; + /* In case of Alternate function mode selection */ + if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD)) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + /*--------------------- EXTI Mode Configuration ------------------------*/ /* Configure the External Interrupt or event for the current IO */ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) @@ -314,9 +314,6 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) tmp &= (0x0FUL << (4u * (position & 0x03u))); if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) { - tmp = 0x0FuL << (4u * (position & 0x03u)); - SYSCFG->EXTICR[position >> 2u] &= ~tmp; - /* Clear EXTI line configuration */ EXTI->IMR1 &= ~(iocurrent); EXTI->EMR1 &= ~(iocurrent); @@ -324,6 +321,9 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) /* Clear Rising Falling edge configuration */ EXTI->RTSR1 &= ~(iocurrent); EXTI->FTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (4u * (position & 0x03u)); + SYSCFG->EXTICR[position >> 2u] &= ~tmp; } /*------------------------- GPIO Mode Configuration --------------------*/ @@ -333,14 +333,14 @@ void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) /* Configure the default Alternate Function in current IO */ GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; - /* Configure the default value for IO Speed */ - GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); /* Configure the default value IO Output Type */ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; - /* Deactivate the Pull-up and Pull-down resistor for the current IO */ - GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); } position++; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c index 5f5f175..c047cd0 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c @@ -351,13 +351,13 @@ /* Private define to centralize the enable/disable of Interrupts */ -#define I2C_XFER_TX_IT (0x00000001U) -#define I2C_XFER_RX_IT (0x00000002U) -#define I2C_XFER_LISTEN_IT (0x00000004U) +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */ -#define I2C_XFER_ERROR_IT (0x00000011U) -#define I2C_XFER_CPLT_IT (0x00000012U) -#define I2C_XFER_RELOAD_IT (0x00000012U) +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */ /* Private define Sequential Transfer Options default/reset value */ #define I2C_NO_OPTION_FRAME (0xFFFF0000U) @@ -410,6 +410,9 @@ static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32 static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + /* Private function to flush TXDR register */ static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); @@ -4251,9 +4254,21 @@ HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevA /* Process Locked */ __HAL_LOCK(hi2c); - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } /* Set State at HAL_I2C_STATE_ABORT */ hi2c->State = HAL_I2C_STATE_ABORT; @@ -4737,6 +4752,13 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint /* Process locked */ __HAL_LOCK(hi2c); + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) { /* Check that I2C transfer finished */ @@ -4788,9 +4810,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint { if (hi2c->XferCount > 0U) { - /* Remove RXNE flag on temporary variable as read done */ - tmpITFlags &= ~I2C_FLAG_RXNE; - /* Read data from RXDR */ *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; @@ -4844,13 +4863,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint /* Nothing to do */ } - /* Check if STOPF is set */ - if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, tmpITFlags); - } - /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -5004,10 +5016,18 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin { uint32_t tmpoptions = hi2c->XferOptions; uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; /* Process locked */ __HAL_LOCK(hi2c); + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) { /* Check that I2C transfer finished */ @@ -5075,8 +5095,24 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin /* Set ErrorCode corresponding to a Non-Acknowledge */ hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ I2C_ITError(hi2c, hi2c->ErrorCode); } @@ -5092,11 +5128,6 @@ static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uin { I2C_ITAddrCplt(hi2c, ITFlags); } - else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) - { - /* Call I2C Slave complete process */ - I2C_ITSlaveCplt(hi2c, ITFlags); - } else { /* Nothing to do */ @@ -5370,9 +5401,27 @@ static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) */ static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) { + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + /* Reset I2C handle mode */ hi2c->Mode = HAL_I2C_MODE_NONE; + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) { /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ @@ -5427,19 +5476,36 @@ static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) { uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; /* Clear STOP Flag */ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + /* Clear Configuration Register 2 */ I2C_RESET_CR2(hi2c); /* Reset handle parameters */ - hi2c->PreviousState = I2C_STATE_NONE; hi2c->XferISR = NULL; hi2c->XferOptions = I2C_NO_OPTION_FRAME; - if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) { /* Clear NACK Flag */ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); @@ -5448,12 +5514,17 @@ static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) hi2c->ErrorCode |= HAL_I2C_ERROR_AF; } + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + /* Flush TX register */ I2C_Flush_TXDR(hi2c); - /* Disable Interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT); - /* Store current volatile hi2c->ErrorCode, misra rule */ tmperror = hi2c->ErrorCode; @@ -5467,6 +5538,7 @@ static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) { hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; if (hi2c->Mode == HAL_I2C_MODE_MEM) { @@ -5501,6 +5573,7 @@ static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) { hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; if (hi2c->Mode == HAL_I2C_MODE_MEM) { @@ -5547,12 +5620,26 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) { uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; /* Clear STOP Flag */ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); - /* Disable all interrupts */ - I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } /* Disable Address Acknowledge */ hi2c->Instance->CR2 |= I2C_CR2_NACK; @@ -5566,6 +5653,9 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) /* If a DMA is ongoing, Update handle size context */ if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + if (hi2c->hdmatx != NULL) { hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx); @@ -5573,6 +5663,9 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) } else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + if (hi2c->hdmarx != NULL) { hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx); @@ -5609,7 +5702,6 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) hi2c->ErrorCode |= HAL_I2C_ERROR_AF; } - hi2c->PreviousState = I2C_STATE_NONE; hi2c->Mode = HAL_I2C_MODE_NONE; hi2c->XferISR = NULL; @@ -5632,6 +5724,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) hi2c->XferOptions = I2C_NO_OPTION_FRAME; hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -5647,6 +5740,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) { hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -5661,6 +5755,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) else { hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -5734,6 +5829,7 @@ static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) { HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; /* Reset handle parameters */ hi2c->Mode = HAL_I2C_MODE_NONE; @@ -5753,7 +5849,6 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) /* keep HAL_I2C_STATE_LISTEN if set */ hi2c->State = HAL_I2C_STATE_LISTEN; - hi2c->PreviousState = I2C_STATE_NONE; hi2c->XferISR = I2C_Slave_ISR_IT; } else @@ -5768,16 +5863,19 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) /* Set HAL_I2C_STATE_READY */ hi2c->State = HAL_I2C_STATE_READY; } - hi2c->PreviousState = I2C_STATE_NONE; hi2c->XferISR = NULL; } /* Abort DMA TX transfer if any */ - if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) { - hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } - if (hi2c->hdmatx != NULL) + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) { /* Set the I2C DMA Abort callback : will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ @@ -5793,13 +5891,20 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); } } + else + { + I2C_TreatErrorCallback(hi2c); + } } /* Abort DMA RX transfer if any */ - else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) { - hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } - if (hi2c->hdmarx != NULL) + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) { /* Set the I2C DMA Abort callback : will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ @@ -5815,10 +5920,28 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); } } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); } - else if (hi2c->State == HAL_I2C_STATE_ABORT) +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) { hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -5832,6 +5955,8 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) } else { + hi2c->PreviousState = I2C_STATE_NONE; + /* Process Unlocked */ __HAL_UNLOCK(hi2c); @@ -6042,30 +6167,16 @@ static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ /* Reset AbortCpltCallback */ - hi2c->hdmatx->XferAbortCallback = NULL; - hi2c->hdmarx->XferAbortCallback = NULL; - - /* Check if come from abort from user */ - if (hi2c->State == HAL_I2C_STATE_ABORT) + if (hi2c->hdmatx != NULL) { - hi2c->State = HAL_I2C_STATE_READY; - - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->AbortCpltCallback(hi2c); -#else - HAL_I2C_AbortCpltCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + hi2c->hdmatx->XferAbortCallback = NULL; } - else + if (hi2c->hdmarx != NULL) { - /* Call the corresponding callback to inform upper layer of End of Transfer */ -#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) - hi2c->ErrorCallback(hi2c); -#else - HAL_I2C_ErrorCallback(hi2c); -#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + hi2c->hdmarx->XferAbortCallback = NULL; } + + I2C_TreatErrorCallback(hi2c); } /** @@ -6342,19 +6453,19 @@ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; } - if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT) + if (InterruptRequest == I2C_XFER_ERROR_IT) { /* Enable ERR and NACK interrupts */ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; } - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) + if (InterruptRequest == I2C_XFER_CPLT_IT) { /* Enable STOP interrupts */ - tmpisr |= I2C_IT_STOPI; + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); } - if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT) + if (InterruptRequest == I2C_XFER_RELOAD_IT) { /* Enable TC interrupts */ tmpisr |= I2C_IT_TCI; @@ -6380,7 +6491,7 @@ static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; } - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) + if (InterruptRequest == I2C_XFER_CPLT_IT) { /* Enable STOP interrupts */ tmpisr |= I2C_IT_STOPI; @@ -6434,19 +6545,19 @@ static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; } - if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT) + if (InterruptRequest == I2C_XFER_ERROR_IT) { /* Enable ERR and NACK interrupts */ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; } - if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT) + if (InterruptRequest == I2C_XFER_CPLT_IT) { /* Enable STOP interrupts */ tmpisr |= I2C_IT_STOPI; } - if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT) + if (InterruptRequest == I2C_XFER_RELOAD_IT) { /* Enable TC interrupts */ tmpisr |= I2C_IT_TCI; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2s.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2s.c new file mode 100644 index 0000000..22a0782 --- /dev/null +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2s.c @@ -0,0 +1,1802 @@ +/** + ****************************************************************************** + * @file stm32wbxx_hal_i2s.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream/Channel. + (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream/Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- Make sure that either: + (+@) PLLPCLK output is configured or + (+@) HSI is enabled or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_CLOCK_VALUE in the stm32wbxx_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + + *** I2S HAL driver macros list *** + =================================== + [..] + Below the list of most used macros in I2S HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + *** I2S HAL driver macros list *** + =================================== + [..] + Callback registration: + + (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. + + Function HAL_I2S_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + + [..] + By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() + or HAL_I2S_Init() function. + + [..] + When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx_hal.h" + +#ifdef HAL_I2S_MODULE_ENABLED + +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup STM32WBxx_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv; + uint32_t i2sodd; + uint32_t packetlength; + uint32_t tmp; + uint32_t i2sclk = 0U; + + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + + if (hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + /* Init the I2S Callback settings */ + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hi2s->MspInitCallback == NULL) + { + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hi2s->MspInitCallback(hi2s); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); + hi2s->Instance->I2SPR = 0x0002U; + + /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ + /* If the requested audio frequency is not the default, compute the prescaler */ + if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) ********************/ + if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 16U; + } + else + { + /* Packet length is 32 bits */ + packetlength = 32U; + } + + /* I2S standard */ + if (hi2s->Init.Standard <= I2S_STANDARD_LSB) + { + /* In I2S standard packet lenght is multiplied by 2 */ + packetlength = packetlength * 2U; + } + + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S); + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + else + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + + /* Remove the flatting point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint32_t)(i2sodd << 8U); + } + else + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); + return HAL_ERROR; + } + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + + /* Write to SPIx I2SPR register the computed value */ + hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); + + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ + hi2s->Init.Standard | hi2s->Init.DataFormat | \ + hi2s->Init.CPOL)); + +#if defined(SPI_I2SCFGR_ASTRTEN) + if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) + { + /* Write to SPIx I2SCFGR */ + SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); + } +#endif /* SPI_I2SCFGR_ASTRTEN */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + if (hi2s->MspDeInitCallback == NULL) + { + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hi2s->MspDeInitCallback(hi2s); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User I2S Callback + * To be used instead of the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = pCallback; + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = pCallback; + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} + +/** + * @brief Unregister an I2S Callback + * I2S callback is redirected to the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + tmpreg_cfgr = hi2s->Instance->I2SCFGR; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + while (hi2s->TxXferCount > 0U) + { + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + /* Check if Slave mode is selected */ + if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) + || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) + { + /* Wait until Busy flag is reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continuous way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Receive data */ + while (hi2s->RxXferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Enable RXNE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Transmit data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set the I2S Tx DMA Half transfer complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfer complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, + (uint32_t)hi2s->pTxBuffPtr, + (uint32_t)&hi2s->Instance->DR, + hi2s->TxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State != HAL_I2S_STATE_READY) + { + __HAL_UNLOCK(hi2s); + return HAL_BUSY; + } + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Pauses the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Disable the I2S DMA Tx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Disable the I2S DMA Rx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Enable the I2S DMA Tx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Enable the I2S DMA Rx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* If the I2S peripheral is still not enabled, enable it */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Stops the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + */ + + /* Disable the I2S Tx/Rx DMA requests */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Abort the I2S DMA tx Stream/Channel */ + if (hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA tx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Abort the I2S DMA rx Stream/Channel */ + if (hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA rx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + hi2s->State = HAL_I2S_STATE_READY; + + return errorcode; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t itsource = hi2s->Instance->CR2; + uint32_t itflag = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && + (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occurred ---------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + hi2s->TxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxHalfCpltCallback(hi2s); +#else + HAL_I2S_TxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + hi2s->RxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxHalfCpltCallback(hi2s); +#else + HAL_I2S_RxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S communication error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); + hi2s->TxXferCount = 0U; + hi2s->RxXferCount = 0U; + + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0U) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set to status*/ + while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + +#endif /* HAL_I2S_MODULE_ENABLED */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c index 0ff31fd..7c6a4c5 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c @@ -55,6 +55,7 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal.h" +#if defined(IPCC) /** @addtogroup STM32WBxx_HAL_Driver * @{ */ @@ -742,5 +743,5 @@ void IPCC_Reset_Register(IPCC_CommonTypeDef *Instance) /** * @} */ - +#endif /* IPCC */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c index f2a3373..58aee4d 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c @@ -113,8 +113,8 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function @ref HAL_IRDA_RegisterCallback() to register a user callback. - Function @ref HAL_IRDA_RegisterCallback() allows to register following callbacks: + Use Function HAL_IRDA_RegisterCallback() to register a user callback. + Function HAL_IRDA_RegisterCallback() allows to register following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. (+) TxCpltCallback : Tx Complete Callback. (+) RxHalfCpltCallback : Rx Half Complete Callback. @@ -129,9 +129,9 @@ and a pointer to the user callback function. [..] - Use function @ref HAL_IRDA_UnRegisterCallback() to reset a callback to the default + Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. - @ref HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxHalfCpltCallback : Tx Half Complete Callback. @@ -146,13 +146,13 @@ (+) MspDeInitCallback : IRDA MspDeInit. [..] - By default, after the @ref HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: - examples @ref HAL_IRDA_TxCpltCallback(), @ref HAL_IRDA_RxHalfCpltCallback(). + examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_IRDA_Init() - and @ref HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the @ref HAL_IRDA_Init() and @ref HAL_IRDA_DeInit() + reset to the legacy weak (surcharged) functions in the HAL_IRDA_Init() + and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). [..] @@ -161,8 +161,8 @@ in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_IRDA_RegisterCallback() before calling @ref HAL_IRDA_DeInit() - or @ref HAL_IRDA_Init() function. + using HAL_IRDA_RegisterCallback() before calling HAL_IRDA_DeInit() + or HAL_IRDA_Init() function. [..] When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or @@ -753,28 +753,28 @@ HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRD (++) HAL_IRDA_ErrorCallback() (#) Non-Blocking mode transfers could be aborted using Abort API's : - (+) HAL_IRDA_Abort() - (+) HAL_IRDA_AbortTransmit() - (+) HAL_IRDA_AbortReceive() - (+) HAL_IRDA_Abort_IT() - (+) HAL_IRDA_AbortTransmit_IT() - (+) HAL_IRDA_AbortReceive_IT() + (++) HAL_IRDA_Abort() + (++) HAL_IRDA_AbortTransmit() + (++) HAL_IRDA_AbortReceive() + (++) HAL_IRDA_Abort_IT() + (++) HAL_IRDA_AbortTransmit_IT() + (++) HAL_IRDA_AbortReceive_IT() (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (+) HAL_IRDA_AbortCpltCallback() - (+) HAL_IRDA_AbortTransmitCpltCallback() - (+) HAL_IRDA_AbortReceiveCpltCallback() + (++) HAL_IRDA_AbortCpltCallback() + (++) HAL_IRDA_AbortTransmitCpltCallback() + (++) HAL_IRDA_AbortReceiveCpltCallback() (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. Errors are handled as follows : - (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, - and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side. - If user wants to abort it, Abort services should be called by user. - (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. - This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, + and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. @endverbatim * @{ @@ -782,10 +782,13 @@ HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRD /** * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @param Timeout Specify timeout value. * @retval HAL status */ @@ -868,10 +871,13 @@ HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, u /** * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @param Timeout Specify timeout value. * @retval HAL status */ @@ -956,10 +962,13 @@ HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, ui /** * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) @@ -998,10 +1007,13 @@ HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData /** * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) @@ -1047,10 +1059,13 @@ HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, /** * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData pointer to data buffer. - * @param Size amount of data to be sent. + * @param pData pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) @@ -1122,12 +1137,15 @@ HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pDat /** * @brief Receive an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. * @note When the IRDA parity is enabled (PCE = 1), the received data contains * the parity bit (MSB position). * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains * the configuration information for the specified IRDA module. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) @@ -2213,6 +2231,7 @@ static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) IRDA_ClockSourceTypeDef clocksource; HAL_StatusTypeDef ret = HAL_OK; const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; /* Check the communication parameters */ assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); @@ -2241,7 +2260,7 @@ static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) MODIFY_REG(hirda->Instance->PRESC, USART_PRESC_PRESCALER, hirda->Init.ClockPrescaler); /*-------------------------- USART GTPR Configuration ----------------------*/ - MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler); + MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); /*-------------------------- USART BRR Configuration -----------------------*/ IRDA_GETCLOCKSOURCE(hirda, clocksource); @@ -2249,13 +2268,15 @@ static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) switch (clocksource) { case IRDA_CLOCKSOURCE_PCLK2: - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + pclk = HAL_RCC_GetPCLK2Freq(); + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); break; case IRDA_CLOCKSOURCE_HSI: tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(HSI_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); break; case IRDA_CLOCKSOURCE_SYSCLK: - tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16(pclk, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); break; case IRDA_CLOCKSOURCE_LSE: tmpreg = (uint16_t)(IRDA_DIV_SAMPLING16((uint32_t)LSE_VALUE, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c index e938601..b6db8e5 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c @@ -36,7 +36,7 @@ (+) Debug mode : When the microcontroller enters debug mode (core halted), the IWDG counter either continues to work normally or stops, depending on DBG_IWDG_STOP configuration bit in DBG module, accessible through - __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros. [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s The IWDG timeout may vary due to LSI frequency dispersion. STM32WBxx @@ -49,17 +49,17 @@ [..] (#) Use IWDG using HAL_IWDG_Init() function to : (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI - clock is forced ON and IWDG counter starts downcounting. - (++) Enable write access to configuration register: IWDG_PR, IWDG_RLR & - IWDG_WINR. + clock is forced ON and IWDG counter starts counting down. + (++) Enable write access to configuration registers: + IWDG_PR, IWDG_RLR and IWDG_WINR. (++) Configure the IWDG prescaler and counter reload value. This reload value will be loaded in the IWDG counter each time the watchdog is reloaded, then the IWDG will start counting down from this value. - (++) wait for status flags to be reset + (++) Wait for status flags to be reset. (++) Depending on window parameter: (+++) If Window Init parameter is same as Window register value, nothing more is done but reload counter value in order to exit - function withy exact time base. + function with exact time base. (+++) Else modify Window register. This will automatically reload watchdog counter. @@ -167,7 +167,7 @@ HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window)); - /* Enable IWDG. LSI is turned on automaticaly */ + /* Enable IWDG. LSI is turned on automatically */ __HAL_IWDG_START(hiwdg); /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lcd.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lcd.c index ea474c2..091af69 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lcd.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lcd.c @@ -89,6 +89,8 @@ #ifdef HAL_LCD_MODULE_ENABLED +#if defined (LCD) + /** @defgroup LCD LCD * @brief LCD HAL module driver * @{ @@ -597,6 +599,8 @@ HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd) * @} */ +#endif /* LCD */ + #endif /* HAL_LCD_MODULE_ENABLED */ /** diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c index 7b9188a..df3c8bf 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c @@ -143,7 +143,7 @@ @endverbatim ****************************************************************************** - * @attention + * @attention * *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

@@ -152,7 +152,8 @@ * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause - * ****************************************************************************** + * + ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ @@ -173,13 +174,39 @@ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Constants + * @{ + */ #define TIMEOUT 1000UL /* Timeout is 1s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup LPTIM_Private_Macros + * @{ + */ +#if defined(LPTIM2) +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT()) + +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \ + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT()) +#else +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() + +#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() +#endif /* LPTIM2 */ +/** + * @} + */ + /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ #if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim); #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag); /* Exported functions --------------------------------------------------------*/ @@ -226,17 +253,20 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source)); assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler)); - if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM) + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) { assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); - assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); } assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source)); - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) { - assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge)); } + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) + { + assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); + assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); + } assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity)); assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode)); assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource)); @@ -269,13 +299,17 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) /* Get the LPTIMx CFGR value */ tmpcfgr = hlptim->Instance->CFGR; - if (((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM) || ((hlptim->Init.CounterSource) == LPTIM_COUNTERSOURCE_EXTERNAL)) + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT)); + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL)); } - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) + { + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRIGSEL)); + } + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL)); + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_CKFLT)); } /* Clear CKSEL, CKPOL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ @@ -289,18 +323,28 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) hlptim->Init.UpdateMode | hlptim->Init.CounterSource); - if (((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM) || ((hlptim->Init.CounterSource) == LPTIM_COUNTERSOURCE_EXTERNAL)) + /* Glitch filters for internal triggers and external inputs are configured + * only if an internal clock source is provided to the LPTIM + */ + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) { - tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity | + tmpcfgr |= (hlptim->Init.Trigger.SampleTime | hlptim->Init.UltraLowPowerClock.SampleTime); } - if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE) + /* Configure the active edge or edges used by the counter only if LPTIM is + * clocked by an external clock source + */ + if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + { + tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity); + } + + if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) { /* Enable External trigger and set the trigger source */ - tmpcfgr |= (hlptim->Init.Trigger.Source | - hlptim->Init.Trigger.ActiveEdge | - hlptim->Init.Trigger.SampleTime); + tmpcfgr |= (hlptim->Init.Trigger.Source | + hlptim->Init.Trigger.ActiveEdge); } /* Write to LPTIMx CFGR */ @@ -351,6 +395,11 @@ HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim) /* Disable the LPTIM Peripheral Clock */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + #if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) if (hlptim->MspDeInitCallback == NULL) { @@ -459,12 +508,30 @@ HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Peri /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + /* Load the pulse value in the compare register */ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -491,6 +558,11 @@ HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Change the TIM state*/ hlptim->State = HAL_LPTIM_STATE_READY; @@ -520,6 +592,41 @@ HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t P /* Reset WAVE bit to set PWM mode */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Enable Autoreload write complete interrupt */ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -542,12 +649,6 @@ HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t P /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -574,6 +675,11 @@ HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Disable Autoreload write complete interrupt */ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -625,12 +731,30 @@ HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + /* Load the pulse value in the compare register */ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in single (one shot) mode */ __HAL_LPTIM_START_SINGLE(hlptim); @@ -657,6 +781,11 @@ HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Change the TIM state*/ hlptim->State = HAL_LPTIM_STATE_READY; @@ -686,6 +815,41 @@ HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint3 /* Reset WAVE bit to set one pulse mode */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE; + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Enable Autoreload write complete interrupt */ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -708,12 +872,6 @@ HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint3 /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - /* Start timer in single (one shot) mode */ __HAL_LPTIM_START_SINGLE(hlptim); @@ -740,6 +898,11 @@ HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Disable Autoreload write complete interrupt */ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -791,12 +954,30 @@ HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + /* Load the pulse value in the compare register */ __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in single (one shot) mode */ __HAL_LPTIM_START_SINGLE(hlptim); @@ -823,6 +1004,11 @@ HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Change the TIM state*/ hlptim->State = HAL_LPTIM_STATE_READY; @@ -852,6 +1038,41 @@ HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Set WAVE bit to enable the set once mode */ hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE; + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + + /* Load the pulse value in the compare register */ + __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); + + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Enable Autoreload write complete interrupt */ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -874,12 +1095,6 @@ HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - - /* Load the pulse value in the compare register */ - __HAL_LPTIM_COMPARE_SET(hlptim, Pulse); - /* Start timer in single (one shot) mode */ __HAL_LPTIM_START_SINGLE(hlptim); @@ -906,6 +1121,11 @@ HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Disable Autoreload write complete interrupt */ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -971,9 +1191,18 @@ HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1000,6 +1229,11 @@ HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Reset ENC bit to disable the encoder interface */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; @@ -1047,6 +1281,29 @@ HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Set ENC bit to enable the encoder interface */ hlptim->Instance->CFGR |= LPTIM_CFGR_ENC; + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Enable "switch to down direction" interrupt */ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN); @@ -1056,9 +1313,6 @@ HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1085,6 +1339,11 @@ HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Reset ENC bit to disable the encoder interface */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC; @@ -1128,12 +1387,30 @@ HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + /* Load the Timeout value in the compare register */ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1160,6 +1437,11 @@ HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Reset TIMOUT bit to enable the timeout function */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; @@ -1191,21 +1473,53 @@ HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Set the LPTIM state */ hlptim->State = HAL_LPTIM_STATE_BUSY; + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + /* Set TIMOUT bit to enable the timeout function */ hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT; - /* Enable Compare match interrupt */ - __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); - /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); + /* Load the Timeout value in the compare register */ __HAL_LPTIM_COMPARE_SET(hlptim, Timeout); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Enable Compare match interrupt */ + __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM); + + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1229,9 +1543,17 @@ HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Set the LPTIM state */ hlptim->State = HAL_LPTIM_STATE_BUSY; + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Reset TIMOUT bit to enable the timeout function */ hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT; @@ -1273,9 +1595,18 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + /* Load the period value in the autoreload register */ __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1302,6 +1633,11 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim) /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Change the TIM state*/ hlptim->State = HAL_LPTIM_STATE_READY; @@ -1325,6 +1661,9 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Set the LPTIM state */ hlptim->State = HAL_LPTIM_STATE_BUSY; + /* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); + /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { @@ -1334,6 +1673,29 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC; } + /* Enable the Peripheral */ + __HAL_LPTIM_ENABLE(hlptim); + + /* Clear flag */ + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); + + /* Load the period value in the autoreload register */ + __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral */ + __HAL_LPTIM_DISABLE(hlptim); + + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Enable Autoreload write complete interrupt */ __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK); @@ -1343,9 +1705,6 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 /* Enable the Peripheral */ __HAL_LPTIM_ENABLE(hlptim); - /* Load the period value in the autoreload register */ - __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period); - /* Start timer in continuous mode */ __HAL_LPTIM_START_CONTINUOUS(hlptim); @@ -1369,15 +1728,22 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim) /* Set the LPTIM state */ hlptim->State = HAL_LPTIM_STATE_BUSY; + /* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */ + __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(hlptim->Instance); + /* Disable the Peripheral */ __HAL_LPTIM_DISABLE(hlptim); + if (HAL_LPTIM_GetState(hlptim) == HAL_LPTIM_STATE_TIMEOUT) + { + return HAL_TIMEOUT; + } + /* Disable Autoreload write complete interrupt */ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK); /* Disable Autoreload match interrupt */ __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM); - /* Change the TIM state*/ hlptim->State = HAL_LPTIM_STATE_READY; @@ -1974,16 +2340,40 @@ static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim) } #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ +/** + * @brief LPTimer Wait for flag set + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains + * the configuration information for LPTIM module. + * @param flag The lptim flag + * @retval HAL status + */ +static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t flag) +{ + HAL_StatusTypeDef result = HAL_OK; + uint32_t count = TIMEOUT * (SystemCoreClock / 20UL / 1000UL); + do + { + count--; + if (count == 0UL) + { + result = HAL_TIMEOUT; + } + } + while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); + + return result; +} + /** * @brief Disable LPTIM HW instance. - * @param lptim pointer to a LPTIM_HandleTypeDef structure that contains + * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration information for LPTIM module. * @note The following sequence is required to solve LPTIM disable HW limitation. * Please check Errata Sheet ES0335 for more details under "MCU may remain * stuck in LPTIM interrupt when entering Stop mode" section. * @retval None */ -void LPTIM_Disable(LPTIM_HandleTypeDef *lptim) +void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim) { uint32_t tmpclksource = 0; uint32_t tmpIER; @@ -1996,116 +2386,112 @@ void LPTIM_Disable(LPTIM_HandleTypeDef *lptim) /*********** Save LPTIM Config ***********/ /* Save LPTIM source clock */ - switch ((uint32_t)lptim->Instance) + switch ((uint32_t)hlptim->Instance) { - case LPTIM1_BASE: - tmpclksource = __HAL_RCC_GET_LPTIM1_SOURCE(); - break; + case LPTIM1_BASE: + tmpclksource = __HAL_RCC_GET_LPTIM1_SOURCE(); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - tmpclksource = __HAL_RCC_GET_LPTIM2_SOURCE(); - break; + case LPTIM2_BASE: + tmpclksource = __HAL_RCC_GET_LPTIM2_SOURCE(); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } /* Save LPTIM configuration registers */ - tmpIER = lptim->Instance->IER; - tmpCFGR = lptim->Instance->CFGR; - tmpCMP = lptim->Instance->CMP; - tmpARR = lptim->Instance->ARR; - tmpOR = lptim->Instance->OR; + tmpIER = hlptim->Instance->IER; + tmpCFGR = hlptim->Instance->CFGR; + tmpCMP = hlptim->Instance->CMP; + tmpARR = hlptim->Instance->ARR; + tmpOR = hlptim->Instance->OR; /*********** Reset LPTIM ***********/ - switch ((uint32_t)lptim->Instance) + switch ((uint32_t)hlptim->Instance) { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_FORCE_RESET(); - __HAL_RCC_LPTIM1_RELEASE_RESET(); - break; + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_FORCE_RESET(); + __HAL_RCC_LPTIM1_RELEASE_RESET(); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - __HAL_RCC_LPTIM2_FORCE_RESET(); - __HAL_RCC_LPTIM2_RELEASE_RESET(); - break; + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_FORCE_RESET(); + __HAL_RCC_LPTIM2_RELEASE_RESET(); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } /*********** Restore LPTIM Config ***********/ - uint32_t Ref_Time; - uint32_t Time_Elapsed; - if ((tmpCMP != 0UL) || (tmpARR != 0UL)) { /* Force LPTIM source kernel clock from APB */ - switch ((uint32_t)lptim->Instance) + switch ((uint32_t)hlptim->Instance) { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_CONFIG(RCC_LPTIM1CLKSOURCE_PCLK1); - break; + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_CONFIG(RCC_LPTIM1CLKSOURCE_PCLK1); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - __HAL_RCC_LPTIM2_CONFIG(RCC_LPTIM2CLKSOURCE_PCLK1); - break; + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_CONFIG(RCC_LPTIM2CLKSOURCE_PCLK1); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } if (tmpCMP != 0UL) { /* Restore CMP register (LPTIM should be enabled first) */ - lptim->Instance->CR |= LPTIM_CR_ENABLE; - lptim->Instance->CMP = tmpCMP; - /* Polling on CMP write ok status after above restore operation */ - Ref_Time = HAL_GetTick(); - do - { - Time_Elapsed = HAL_GetTick() - Ref_Time; - } while ((!(__HAL_LPTIM_GET_FLAG(lptim, LPTIM_FLAG_CMPOK))) && (Time_Elapsed <= TIMEOUT)); + hlptim->Instance->CR |= LPTIM_CR_ENABLE; + hlptim->Instance->CMP = tmpCMP; - __HAL_LPTIM_CLEAR_FLAG(lptim, LPTIM_FLAG_CMPOK); + /* Wait for the completion of the write operation to the LPTIM_CMP register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_CMPOK) == HAL_TIMEOUT) + { + hlptim->State = HAL_LPTIM_STATE_TIMEOUT; + } + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK); } if (tmpARR != 0UL) { /* Restore ARR register (LPTIM should be enabled first) */ - lptim->Instance->CR |= LPTIM_CR_ENABLE; - lptim->Instance->ARR = tmpARR; - /* Polling on ARR write ok status after above restore operation */ - Ref_Time = HAL_GetTick(); - do + hlptim->Instance->CR |= LPTIM_CR_ENABLE; + hlptim->Instance->ARR = tmpARR; + + /* Wait for the completion of the write operation to the LPTIM_ARR register */ + if (LPTIM_WaitForFlag(hlptim, LPTIM_FLAG_ARROK) == HAL_TIMEOUT) { - Time_Elapsed = HAL_GetTick() - Ref_Time; - } while ((!(__HAL_LPTIM_GET_FLAG(lptim, LPTIM_FLAG_ARROK))) && (Time_Elapsed <= TIMEOUT)); + hlptim->State = HAL_LPTIM_STATE_TIMEOUT; + } - __HAL_LPTIM_CLEAR_FLAG(lptim, LPTIM_FLAG_ARROK); + __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK); } /* Restore LPTIM source kernel clock */ - switch ((uint32_t)lptim->Instance) + switch ((uint32_t)hlptim->Instance) { - case LPTIM1_BASE: - __HAL_RCC_LPTIM1_CONFIG(tmpclksource); - break; + case LPTIM1_BASE: + __HAL_RCC_LPTIM1_CONFIG(tmpclksource); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - __HAL_RCC_LPTIM2_CONFIG(tmpclksource); - break; + case LPTIM2_BASE: + __HAL_RCC_LPTIM2_CONFIG(tmpclksource); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } } /* Restore configuration registers (LPTIM should be disabled first) */ - lptim->Instance->CR &= ~(LPTIM_CR_ENABLE); - lptim->Instance->IER = tmpIER; - lptim->Instance->CFGR = tmpCFGR; - lptim->Instance->OR = tmpOR; + hlptim->Instance->CR &= ~(LPTIM_CR_ENABLE); + hlptim->Instance->IER = tmpIER; + hlptim->Instance->CFGR = tmpCFGR; + hlptim->Instance->OR = tmpOR; __enable_irq(); } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c index 91de06c..ad58b42 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c @@ -1714,7 +1714,10 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) { /* Get SETUP Packet*/ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, ep->pmaadress, (uint16_t)ep->xfer_count); + + USB_ReadPMA(hpcd->Instance, (uint8_t *)hpcd->Setup, + ep->pmaadress, (uint16_t)ep->xfer_count); + /* SETUP bit kept frozen while CTR_RX = 1*/ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); @@ -1729,21 +1732,24 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) else if ((wEPVal & USB_EP_CTR_RX) != 0U) { PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + /* Get Control Data OUT Packet*/ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - if (ep->xfer_count != 0U) + if ((ep->xfer_count != 0U) && (ep->xfer_buff != 0U)) { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, (uint16_t)ep->xfer_count); + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, + ep->pmaadress, (uint16_t)ep->xfer_count); + ep->xfer_buff += ep->xfer_count; - } - /* Process Control Data OUT Packet*/ + /* Process Control Data OUT Packet*/ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataOutStageCallback(hpcd, 0U); + hpcd->DataOutStageCallback(hpcd, 0U); #else - HAL_PCD_DataOutStageCallback(hpcd, 0U); + HAL_PCD_DataOutStageCallback(hpcd, 0U); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c index 086e6e7..77ba282 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c @@ -125,6 +125,9 @@ HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) USB_TypeDef *USBx = hpcd->Instance; hpcd->battery_charging_active = 1U; + /* Enable BCD feature */ + USBx->BCDR |= USB_BCDR_BCDEN; + /* Enable DCD : Data Contact Detect */ USBx->BCDR &= ~(USB_BCDR_PDEN); USBx->BCDR &= ~(USB_BCDR_SDEN); @@ -143,6 +146,7 @@ HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) USB_TypeDef *USBx = hpcd->Instance; hpcd->battery_charging_active = 0U; + /* Disable BCD feature */ USBx->BCDR &= ~(USB_BCDR_BCDEN); return HAL_OK; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.c index 429d2df..f4ef207 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pka.c @@ -80,6 +80,7 @@ (++) HAL_PKA_ECCMulFastMode_IT(). (++) HAL_PKA_ECCMul_GetResult() to retrieve the result of the operation. + *** Low level operation *** ================================= [..] @@ -142,8 +143,6 @@ (++) HAL_PKA_MontgomeryParam(). (++) HAL_PKA_MontgomeryParam_IT(). (++) HAL_PKA_MontgomeryParam_GetResult() to retrieve the result of the operation. - (+) You can save computation time by storing this parameter for a later usage. - Use it again with HAL_PKA_MontgomeryParam_Set(); *** Polling mode operation *** =================================== @@ -263,11 +262,15 @@ * @{ */ #define PKA_RAM_SIZE 894U + +/* Private macro -------------------------------------------------------------*/ +#define __PKA_RAM_PARAM_END(TAB,INDEX) do{ \ + TAB[INDEX] = 0UL; \ + } while(0) /** * @} */ -/* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @defgroup PKA_Private_Functions PKA Private Functions @@ -320,9 +323,7 @@ void PKA_ARI_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint32_t *p (+) User must implement HAL_PKA_MspInit() function in which he configures all related peripherals resources (CLOCK, IT and NVIC ). - (+) Call the function HAL_PKA_Init() to configure the selected device with - the selected configuration: - (++) Security level + (+) Call the function HAL_PKA_Init() to configure the device. (+) Call the function HAL_PKA_DeInit() to restore the default configuration of the selected PKAx peripheral. @@ -689,6 +690,7 @@ HAL_StatusTypeDef HAL_PKA_UnRegisterCallback(PKA_HandleTypeDef *hpka, HAL_PKA_Ca (++) HAL_PKA_ECCMulFastMode() (++) HAL_PKA_ECCMul_GetResult(); + (++) HAL_PKA_Add() (++) HAL_PKA_Sub() (++) HAL_PKA_Cmp() @@ -807,6 +809,7 @@ HAL_StatusTypeDef HAL_PKA_ModExpFastMode_IT(PKA_HandleTypeDef *hpka, PKA_ModExpF return PKA_Process_IT(hpka, PKA_MODE_MODULAR_EXP_FAST_MODE); } + /** * @brief Retrieve operation result. * @param hpka PKA handle @@ -859,7 +862,7 @@ HAL_StatusTypeDef HAL_PKA_ECDSASign_IT(PKA_HandleTypeDef *hpka, PKA_ECDSASignInT * @brief Retrieve operation result. * @param hpka PKA handle * @param out Output information - * @param outExt Additionnal Output information (facultative) + * @param outExt Additional Output information (facultative) */ void HAL_PKA_ECDSASign_GetResult(PKA_HandleTypeDef *hpka, PKA_ECDSASignOutTypeDef *out, PKA_ECDSASignOutExtParamTypeDef *outExt) { @@ -873,7 +876,7 @@ void HAL_PKA_ECDSASign_GetResult(PKA_HandleTypeDef *hpka, PKA_ECDSASignOutTypeDe PKA_Memcpy_u32_to_u8(out->SSign, &hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_SIGNATURE_S], size); } - /* If user requires the additionnal information */ + /* If user requires the additional information */ if (outExt != NULL) { /* Move the result to appropriate location (indicated in outExt parameter) */ @@ -1009,8 +1012,9 @@ HAL_StatusTypeDef HAL_PKA_PointCheck_IT(PKA_HandleTypeDef *hpka, PKA_PointCheckI */ uint32_t HAL_PKA_PointCheck_IsOnCurve(PKA_HandleTypeDef const *const hpka) { + #define PKA_POINT_IS_ON_CURVE 0UL /* Invert the value of the PKA RAM containig the result of the operation */ - return (hpka->Instance->RAM[PKA_POINT_CHECK_OUT_ERROR] == 0UL) ? 1UL : 0UL; + return (hpka->Instance->RAM[PKA_POINT_CHECK_OUT_ERROR] == PKA_POINT_IS_ON_CURVE) ? 1UL : 0UL; } /** @@ -1043,7 +1047,6 @@ HAL_StatusTypeDef HAL_PKA_ECCMul_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef /* Start the operation */ return PKA_Process_IT(hpka, PKA_MODE_ECC_MUL); } - /** * @brief ECC scalar multiplication in blocking mode. * @param hpka PKA handle @@ -1074,7 +1077,6 @@ HAL_StatusTypeDef HAL_PKA_ECCMulFastMode_IT(PKA_HandleTypeDef *hpka, PKA_ECCMulF /* Start the operation */ return PKA_Process_IT(hpka, PKA_MODE_ECC_MUL_FAST_MODE); } - /** * @brief Retrieve operation result. * @param hpka PKA handle @@ -1469,6 +1471,7 @@ HAL_StatusTypeDef HAL_PKA_MontgomeryParam_IT(PKA_HandleTypeDef *hpka, PKA_Montgo return PKA_Process_IT(hpka, PKA_MODE_MONTGOMERY_PARAM); } + /** * @brief Retrieve operation result. * @param hpka PKA handle @@ -1568,7 +1571,6 @@ void HAL_PKA_IRQHandler(PKA_HandleTypeDef *hpka) hpka->ErrorCode |= HAL_PKA_ERROR_OPERATION; } } - /* Trigger the error callback if an error is present */ if (hpka->ErrorCode != HAL_PKA_ERROR_NONE) { @@ -1738,8 +1740,9 @@ uint32_t PKA_CheckError(PKA_HandleTypeDef *hpka, uint32_t mode) /* Check the operation success in case of ECDSA signature */ if (mode == PKA_MODE_ECDSA_SIGNATURE) { - /* If error output result is different from 0, ecsa sign operation need to be repeated */ - if (hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_ERROR] != 0UL) +#define EDCSA_SIGN_NOERROR 0UL + /* If error output result is different from no error, ecsa sign operation need to be repeated */ + if (hpka->Instance->RAM[PKA_ECDSA_SIGN_OUT_ERROR] != EDCSA_SIGN_NOERROR) { err |= HAL_PKA_ERROR_OPERATION; } @@ -2026,15 +2029,15 @@ void PKA_ModExp_Set(PKA_HandleTypeDef *hpka, PKA_ModExpInTypeDef *in) /* Move the input parameters pOp1 to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE], in->pOp1, in->OpSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE + (in->OpSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT_BASE + (in->OpSize / 4UL)); /* Move the exponent to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT], in->pExp, in->expSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT + (in->expSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT + (in->expSize / 4UL)); /* Move the modulus to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS], in->pMod, in->OpSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS + (in->OpSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MODULUS + (in->OpSize / 4UL)); } /** @@ -2052,21 +2055,22 @@ void PKA_ModExpFastMode_Set(PKA_HandleTypeDef *hpka, PKA_ModExpFastModeInTypeDef /* Move the input parameters pOp1 to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE], in->pOp1, in->OpSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT_BASE + (in->OpSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT_BASE + (in->OpSize / 4UL)); /* Move the exponent to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT], in->pExp, in->expSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_EXPONENT + (in->expSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_EXPONENT + (in->expSize / 4UL)); /* Move the modulus to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS], in->pMod, in->OpSize); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MODULUS + (in->OpSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MODULUS + (in->OpSize / 4UL)); /* Move the Montgomery parameter to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM], in->pMontgomeryParam, in->expSize / 4UL); - hpka->Instance->RAM[PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM + (in->expSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM + (in->expSize / 4UL)); } + /** * @brief Set input parameters. * @param hpka PKA handle @@ -2085,35 +2089,35 @@ void PKA_ECDSASign_Set(PKA_HandleTypeDef *hpka, PKA_ECDSASignInTypeDef *in) /* Move the input parameters coefficient |a| to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_A_COEFF], in->coef, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters modulus value p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_MOD_GF], in->modulus, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters integer k to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_K], in->integer, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_K + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_K + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters base point G coordinate x to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_X], in->basePointX, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters base point G coordinate y to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y], in->basePointY, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters hash of message z to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_HASH_E], in->hash, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters private key d to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D], in->privateKey, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters prime order n to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_ORDER_N], in->primeOrder, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_SIGN_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_SIGN_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)); } /** @@ -2134,43 +2138,43 @@ void PKA_ECDSAVerif_Set(PKA_HandleTypeDef *hpka, PKA_ECDSAVerifInTypeDef *in) /* Move the input parameters coefficient |a| to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_A_COEFF], in->coef, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters modulus value p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_MOD_GF], in->modulus, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters base point G coordinate x to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_X], in->basePointX, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters base point G coordinate y to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y], in->basePointY, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters public-key curve point Q coordinate xQ to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X], in->pPubKeyCurvePtX, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters public-key curve point Q coordinate xQ to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y], in->pPubKeyCurvePtY, in->modulusSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters signature part r to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_R], in->RSign, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_R + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_SIGNATURE_R + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters signature part s to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_S], in->SSign, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_SIGNATURE_S + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_SIGNATURE_S + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters hash of message z to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_HASH_E], in->hash, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_HASH_E + ((in->primeOrderSize + 3UL) / 4UL)); /* Move the input parameters curve prime order n to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_ORDER_N], in->primeOrder, in->primeOrderSize); - hpka->Instance->RAM[PKA_ECDSA_VERIF_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECDSA_VERIF_IN_ORDER_N + ((in->primeOrderSize + 3UL) / 4UL)); } /** @@ -2185,27 +2189,27 @@ void PKA_RSACRTExp_Set(PKA_HandleTypeDef *hpka, PKA_RSACRTExpInTypeDef *in) /* Move the input parameters operand dP to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DP_CRT], in->pOpDp, in->size / 2UL); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DP_CRT + (in->size / 8UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_DP_CRT + (in->size / 8UL)); /* Move the input parameters operand dQ to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DQ_CRT], in->pOpDq, in->size / 2UL); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_DQ_CRT + (in->size / 8UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_DQ_CRT + (in->size / 8UL)); /* Move the input parameters operand qinv to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_QINV_CRT], in->pOpQinv, in->size / 2UL); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_QINV_CRT + (in->size / 8UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_QINV_CRT + (in->size / 8UL)); /* Move the input parameters prime p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_P], in->pPrimeP, in->size / 2UL); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_P + (in->size / 8UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_PRIME_P + (in->size / 8UL)); /* Move the input parameters prime q to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_Q], in->pPrimeQ, in->size / 2UL); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_PRIME_Q + (in->size / 8UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_PRIME_Q + (in->size / 8UL)); /* Move the input parameters operand A to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_EXPONENT_BASE], in->popA, in->size); - hpka->Instance->RAM[PKA_RSA_CRT_EXP_IN_EXPONENT_BASE + (in->size / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_RSA_CRT_EXP_IN_EXPONENT_BASE + (in->size / 4UL)); } /** @@ -2223,23 +2227,23 @@ void PKA_PointCheck_Set(PKA_HandleTypeDef *hpka, PKA_PointCheckInTypeDef *in) /* Move the input parameters coefficient |a| to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_A_COEFF], in->coefA, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters coefficient b to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_B_COEFF], in->coefB, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_B_COEFF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters modulus value p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_MOD_GF], in->modulus, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate x to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate y to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); } /** @@ -2260,25 +2264,28 @@ void PKA_ECCMul_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulInTypeDef *in) /* Move the input parameters coefficient |a| to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF], in->coefA, in->modulusSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); + /* Move the input parameters modulus value p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF], in->modulus, in->modulusSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters scalar multiplier k to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K], in->scalarMul, in->scalarMulSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate x to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate y to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); + } + /** * @brief Set input parameters. * @param hpka PKA handle @@ -2297,29 +2304,28 @@ void PKA_ECCMulFastMode_Set(PKA_HandleTypeDef *hpka, PKA_ECCMulFastModeInTypeDef /* Move the input parameters coefficient |a| to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF], in->coefA, in->modulusSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_A_COEFF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters modulus value p to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF], in->modulus, in->modulusSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_MOD_GF + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters scalar multiplier k to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K], in->scalarMul, in->scalarMulSize); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_K + ((in->scalarMulSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate x to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X], in->pointX, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_X + ((in->modulusSize + 3UL) / 4UL)); /* Move the input parameters Point P coordinate y to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y], in->pointY, in->modulusSize); - hpka->Instance->RAM[PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_POINT_CHECK_IN_INITIAL_POINT_Y + ((in->modulusSize + 3UL) / 4UL)); /* Move the Montgomery parameter to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM], in->pMontgomeryParam, (in->modulusSize + 3UL) / 4UL); - hpka->Instance->RAM[PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM + ((in->modulusSize + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM + ((in->modulusSize + 3UL) / 4UL)); } - /** * @brief Set input parameters. * @param hpka PKA handle @@ -2332,11 +2338,11 @@ void PKA_ModInv_Set(PKA_HandleTypeDef *hpka, PKA_ModInvInTypeDef *in) /* Move the input parameters operand A to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP1], in->pOp1, in->size); - hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP1 + in->size] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_INV_IN_OP1 + in->size); /* Move the input parameters modulus value n to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP2_MOD], in->pMod, in->size * 4UL); - hpka->Instance->RAM[PKA_MODULAR_INV_IN_OP2_MOD + in->size] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_INV_IN_OP2_MOD + in->size); } /** @@ -2354,11 +2360,11 @@ void PKA_ModRed_Set(PKA_HandleTypeDef *hpka, PKA_ModRedInTypeDef *in) /* Move the input parameters operand A to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_OPERAND], in->pOp1, in->OpSize); - hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_OPERAND + in->OpSize] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_REDUC_IN_OPERAND + in->OpSize); /* Move the input parameters modulus value n to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_MODULUS], in->pMod, in->modSize); - hpka->Instance->RAM[PKA_MODULAR_REDUC_IN_MODULUS + (in->modSize / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MODULAR_REDUC_IN_MODULUS + (in->modSize / 4UL)); } /** @@ -2376,7 +2382,7 @@ void PKA_MontgomeryParam_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const /* Move the input parameters pOp1 to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_IN_MODULUS], pOp1, size); - hpka->Instance->RAM[PKA_MONTGOMERY_PARAM_IN_MODULUS + ((size + 3UL) / 4UL)] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_MONTGOMERY_PARAM_IN_MODULUS + ((size + 3UL) / 4UL)); } } @@ -2397,21 +2403,21 @@ void PKA_ARI_Set(PKA_HandleTypeDef *hpka, const uint32_t size, const uint32_t *p { /* Move the input parameters pOp1 to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP1], pOp1, size); - hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP1 + size] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP1 + size); } if (pOp2 != NULL) { /* Move the input parameters pOp2 to PKA RAM */ PKA_Memcpy_u32_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP2], pOp2, size); - hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP2 + size] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP2 + size); } if (pOp3 != NULL) { /* Move the input parameters pOp3 to PKA RAM */ PKA_Memcpy_u8_to_u32(&hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP3], pOp3, size * 4UL); - hpka->Instance->RAM[PKA_ARITHMETIC_ALL_OPS_IN_OP3 + size] = 0UL; + __PKA_RAM_PARAM_END(hpka->Instance->RAM, PKA_ARITHMETIC_ALL_OPS_IN_OP3 + size); } } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c index 255ca53..d722c0a 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c @@ -114,8 +114,10 @@ void HAL_PWR_DeInit(void) LL_PWR_WriteReg(PDCRB, PWR_PDCRB_RESET_VALUE); LL_PWR_WriteReg(PUCRC, PWR_PUCRC_RESET_VALUE); LL_PWR_WriteReg(PDCRC, PWR_PDCRC_RESET_VALUE); +#if defined(GPIOD) LL_PWR_WriteReg(PUCRD, PWR_PUCRD_RESET_VALUE); LL_PWR_WriteReg(PDCRD, PWR_PDCRD_RESET_VALUE); +#endif LL_PWR_WriteReg(PUCRE, PWR_PUCRE_RESET_VALUE); LL_PWR_WriteReg(PDCRE, PWR_PDCRE_RESET_VALUE); LL_PWR_WriteReg(PUCRH, PWR_PUCRH_RESET_VALUE); @@ -131,8 +133,10 @@ void HAL_PWR_DeInit(void) | LL_PWR_SCR_CCRPEF | LL_PWR_SCR_C802WUF | LL_PWR_SCR_CBLEWUF +#if defined(PWR_CR5_SMPSEN) | LL_PWR_SCR_CBORHF | LL_PWR_SCR_CSMPSFBF +#endif | LL_PWR_SCR_CWUF ); @@ -556,6 +560,8 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) * startup delay is incurred when waking up. * By keeping the internal regulator ON during Stop mode (Stop 0), the consumption * is higher although the startup time is reduced. + * @note Case of Stop0 mode with SMPS: Before entering Stop 0 mode with SMPS Step Down converter enabled, + * the HSI16 must be kept on by enabling HSI kernel clock (set HSIKERON register bit). * @note According to system power policy, system entering in Stop mode * is depending on other CPU power mode. * @param Regulator Specifies the regulator state in Stop mode. diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c index b66e56a..4f28fe6 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c @@ -79,6 +79,7 @@ */ +#if defined(PWR_CR1_VOS) /** * @brief Return Voltage Scaling Range. * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_RANGE1 or PWR_REGULATOR_VOLTAGE_RANGE2) @@ -146,6 +147,7 @@ HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) return HAL_OK; } +#endif /****************************************************************************/ @@ -179,7 +181,7 @@ void HAL_PWREx_DisableBatteryCharging(void) } /****************************************************************************/ - +#if defined(PWR_CR2_PVME1) /** * @brief Enable VDDUSB supply. * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. @@ -198,6 +200,7 @@ void HAL_PWREx_DisableVddUSB(void) { CLEAR_BIT(PWR->CR2, PWR_CR2_USV); } +#endif /****************************************************************************/ @@ -219,7 +222,7 @@ void HAL_PWREx_DisableInternalWakeUpLine(void) CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL); } - +#if defined(PWR_CR5_SMPSEN) /** * @brief Enable BORH and SMPS step down converter forced in bypass mode * interrupt for CPU1 @@ -239,7 +242,7 @@ void HAL_PWREx_DisableBORH_SMPSBypassIT(void) { CLEAR_BIT(PWR->CR3, PWR_CR3_EBORHSMPSFB); } - +#endif /** * @brief Enable RF Phase interrupt. @@ -359,10 +362,12 @@ HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) SET_BIT(PWR->PUCRC, GPIONumber); CLEAR_BIT(PWR->PDCRC, GPIONumber); break; +#if defined(GPIOD) case PWR_GPIO_D: SET_BIT(PWR->PUCRD, GPIONumber); CLEAR_BIT(PWR->PDCRD, GPIONumber); break; +#endif case PWR_GPIO_E: SET_BIT(PWR->PUCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); CLEAR_BIT(PWR->PDCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); @@ -412,9 +417,11 @@ HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber case PWR_GPIO_C: CLEAR_BIT(PWR->PUCRC, GPIONumber); break; +#if defined(GPIOD) case PWR_GPIO_D: CLEAR_BIT(PWR->PUCRD, GPIONumber); break; +#endif case PWR_GPIO_E: CLEAR_BIT(PWR->PUCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); break; @@ -473,10 +480,12 @@ HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumbe SET_BIT(PWR->PDCRC, GPIONumber); CLEAR_BIT(PWR->PUCRC, GPIONumber); break; +#if defined(GPIOD) case PWR_GPIO_D: SET_BIT(PWR->PDCRD, GPIONumber); CLEAR_BIT(PWR->PUCRD, GPIONumber); break; +#endif case PWR_GPIO_E: SET_BIT(PWR->PDCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); CLEAR_BIT(PWR->PUCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); @@ -526,9 +535,11 @@ HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumb case PWR_GPIO_C: CLEAR_BIT(PWR->PDCRC, GPIONumber); break; +#if defined(GPIOD) case PWR_GPIO_D: CLEAR_BIT(PWR->PDCRD, GPIONumber); break; +#endif case PWR_GPIO_E: CLEAR_BIT(PWR->PDCRE, (GPIONumber & PWR_PORTE_AVAILABLE_PINS)); break; @@ -571,6 +582,7 @@ void HAL_PWREx_DisablePullUpPullDownConfig(void) /****************************************************************************/ +#if defined(PWR_CR5_SMPSEN) /** * @brief Set BOR configuration * @param BORConfiguration This parameter can be one of the following values: @@ -592,6 +604,7 @@ uint32_t HAL_PWREx_GetBORConfig(void) { return LL_PWR_GetBORConfig(); } +#endif /****************************************************************************/ /** @@ -690,6 +703,7 @@ void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode) } /****************************************************************************/ +#if defined(PWR_CR2_PVME1) /** * @brief Enable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. * @retval None @@ -707,6 +721,8 @@ void HAL_PWREx_DisablePVM1(void) { CLEAR_BIT(PWR->CR2, PWR_PVM_1); } +#endif + /** * @brief Enable the Power Voltage Monitoring 3: VDDA versus 1.62V. * @retval None @@ -753,6 +769,7 @@ HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) configure the corresponding EXTI line accordingly. */ switch (sConfigPVM->PVMType) { +#if defined(PWR_CR2_PVME1) case PWR_PVM_1: /* Clear any previous config. Keep it clear if no event or IT mode is selected */ __HAL_PWR_PVM1_EXTI_DISABLE_EVENT(); @@ -783,6 +800,7 @@ HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); } break; +#endif case PWR_PVM_3: /* Clear any previous config. Keep it clear if no event or IT mode is selected */ @@ -824,6 +842,7 @@ HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) return status; } +#if defined(PWR_CR5_SMPSEN) /** * @brief Configure the SMPS step down converter. * @note SMPS output voltage is calibrated in production, @@ -867,13 +886,13 @@ HAL_StatusTypeDef HAL_PWREx_ConfigSMPS(PWR_SMPSTypeDef *sConfigSMPS) OutputVoltageLevelTrimmed = 0; status = HAL_ERROR; } - else if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) - { - OutputVoltageLevelTrimmed = (int32_t)PWR_CR5_SMPSVOS; - status = HAL_ERROR; - } else { + if(OutputVoltageLevelTrimmed > (int32_t)PWR_CR5_SMPSVOS) + { + OutputVoltageLevelTrimmed = (int32_t)PWR_CR5_SMPSVOS; + status = HAL_ERROR; + } } /* Update register */ @@ -923,6 +942,7 @@ uint32_t HAL_PWREx_SMPS_GetEffectiveMode(void) { return (uint32_t)(READ_BIT(PWR->SR2, (PWR_SR2_SMPSF | PWR_SR2_SMPSBF))); } +#endif /****************************************************************************/ @@ -1069,6 +1089,8 @@ HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) * is set; the MSI oscillator is selected if STOPWUCK is cleared. * @note By keeping the internal regulator ON during Stop 0 mode, the consumption * is higher although the startup time is reduced. + * @note Case of Stop0 mode with SMPS: Before entering Stop 0 mode with SMPS Step Down converter enabled, + * the HSI16 must be kept on by enabling HSI kernel clock (set HSIKERON register bit). * @note According to system power policy, system entering in Stop mode * is depending on other CPU power mode. * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. @@ -1177,6 +1199,15 @@ void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry) * @note When exiting Stop 2 mode by issuing an interrupt or a wakeup event, * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note Case of Stop2 mode and debugger probe attached: a workaround should be applied. + * Issue specified in "ES0394 - STM32WB55Cx/Rx/Vx device errata": + * 2.2.9 Incomplete Stop 2 mode entry after a wakeup from debug upon EXTI line 48 event + * "With the JTAG debugger enabled on GPIO pins and after a wakeup from debug triggered by an event on EXTI + * line 48 (CDBGPWRUPREQ), the device may enter in a state in which attempts to enter Stop 2 mode are not fully + * effective ..." + * Workaround implementation example using LL driver: + * LL_EXTI_DisableIT_32_63(LL_EXTI_LINE_48); + * LL_C2_EXTI_DisableIT_32_63(LL_EXTI_LINE_48); * @note According to system power policy, system entering in Stop mode * is depending on other CPU power mode. * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. @@ -1270,7 +1301,7 @@ void HAL_PWREx_PVD_PVM_IRQHandler(void) __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); } - +#if defined(PWR_CR2_PVME1) /* Next, successively check PVMx exti flags */ if(__HAL_PWR_PVM1_EXTI_GET_FLAG() != 0U) { @@ -1280,6 +1311,7 @@ void HAL_PWREx_PVD_PVM_IRQHandler(void) /* Clear PVM1 exti pending bit */ __HAL_PWR_PVM1_EXTI_CLEAR_FLAG(); } +#endif if(__HAL_PWR_PVM3_EXTI_GET_FLAG() != 0U) { @@ -1291,7 +1323,7 @@ void HAL_PWREx_PVD_PVM_IRQHandler(void) } } - +#if defined(PWR_CR2_PVME1) /** * @brief PWR PVM1 interrupt callback * @retval None @@ -1302,6 +1334,7 @@ __weak void HAL_PWREx_PVM1Callback(void) HAL_PWREx_PVM1Callback() API can be implemented in the user file */ } +#endif /** * @brief PWR PVM3 interrupt callback diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_qspi.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_qspi.c index 75369d0..ae83a7a 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_qspi.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_qspi.c @@ -208,7 +208,7 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal.h" -#if defined(QUADSPI) || defined(QUADSPI1) || defined(QUADSPI2) +#if defined(QUADSPI) /** @addtogroup STM32WBxx_HAL_Driver * @{ @@ -340,7 +340,7 @@ HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi) #endif /* Configure the default timeout for the QSPI memory access */ - HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE); + HAL_QSPI_SetTimeout(hqspi, HAL_QSPI_TIMEOUT_DEFAULT_VALUE); } /* Configure QSPI FIFO Threshold */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c index 165678e..c0a8841 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c @@ -10,6 +10,7 @@ * @verbatim ============================================================================== + ##### RCC specific features ##### ============================================================================== [..] @@ -18,8 +19,8 @@ and I-Cache are disabled, and all peripherals are off except internal SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHBs) and Low speed (APBs) busses: - all peripherals mapped on these busses are running at MSI speed. + (+) There is no prescaler on High speed (AHBs) and Low speed (APBs) buses: + all peripherals mapped on these buses are running at MSI speed. (+) The clock for all peripherals is switched off, except the SRAM and FLASH. (+) All GPIOs are in analog mode, except the JTAG pins which are assigned to be used for debug purpose. @@ -29,7 +30,7 @@ (+) Configure the clock source to be used to drive the System clock (if the application needs higher frequency/performance) (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB busses prescalers + (+) Configure the AHB and APB buses prescalers (+) Enable the clock for the peripheral(s) to be used (+) Configure the clock source(s) for peripherals which clocks are not derived from the System clock (SAI1, RTC, ADC, USB/RNG, USART1, LPUART1, LPTIMx, I2Cx, SMPS) @@ -75,7 +76,9 @@ #define LSI2_TIMEOUT_VALUE (3U) /* to be adjusted with DS */ #define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ #define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#if defined(SAI1) #define PLLSAI1_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#endif #define PRESCALER_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ #define LATENCY_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ #define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ @@ -145,7 +148,7 @@ static HAL_StatusTypeDef RCC_SetFlashLatency(uint32_t Flash_ClkSrcFreq, uint32_t =============================================================================== [..] This section provides functions allowing to configure the internal and external oscillators - (HSE, HSI, LSE, MSI, LSI1, LSI2, PLL, CSS and MCO) and the System busses clocks (SYSCLK, HCLK1, HCLK2, HCLK4, PCLK1 + (HSE, HSI, LSE, MSI, LSI1, LSI2, PLL, CSS and MCO) and the System buses clocks (SYSCLK, HCLK1, HCLK2, HCLK4, PCLK1 and PCLK2). [..] Internal/external clock and PLL configuration @@ -196,14 +199,14 @@ static HAL_StatusTypeDef RCC_SetFlashLatency(uint32_t Flash_ClkSrcFreq, uint32_t (+) MCO (microcontroller clock output): used to output MSI, LSI1, LSI2, HSI, LSE, HSE (before and after stabilization), SYSCLK, HSI48 or main PLL clock (through a configurable prescaler) on PA8, PB6 & PA15 pins. - [..] System, AHB and APB busses clocks configuration + [..] System, AHB and APB buses clocks configuration (+) Several clock sources can be used to drive the System clock (SYSCLK): MSI, HSI, HSE and main PLL. The AHB clock (HCLK1) is derived from System clock through configurable prescaler and used to clock the CPU, memory and peripherals mapped on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these busses. You can use + the peripherals mapped on these buses. You can use "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. The AHB4 clock (HCLK4) is derived from System clock through configurable prescaler and used to clock the FLASH @@ -271,6 +274,9 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) /* Get Start Tick*/ tickstart = HAL_GetTick(); + /* MSI PLL OFF */ + LL_RCC_MSI_DisablePLLMode(); + /* Set MSION bit */ LL_RCC_MSI_Enable(); @@ -308,13 +314,17 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) } /* Reset HSION, HSIKERON, HSIASFS, HSEON, PLLON, PLLSAI11ON, HSEPRE bits */ +#if defined(SAI1) CLEAR_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSIKERON | RCC_CR_HSIASFS | RCC_CR_HSEON | RCC_CR_HSEPRE | RCC_CR_PLLON | RCC_CR_PLLSAI1ON); +#else + CLEAR_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSIKERON | RCC_CR_HSIASFS | RCC_CR_HSEON | RCC_CR_HSEPRE | RCC_CR_PLLON); +#endif /* Reset HSEBYP bit once HSE is OFF */ LL_RCC_HSE_DisableBypass(); /* Get Start Tick*/ - tickstart = HAL_GetTick(); + tickstart = HAL_GetTick(); /* Wait till PLL is ready */ while (LL_RCC_PLL_IsReady() != 0U) @@ -328,7 +338,7 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) /* once PLL is OFF, reset PLLCFGR register to default value */ WRITE_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLR_0 | RCC_PLLCFGR_PLLQ_0 | RCC_PLLCFGR_PLLP_1 | RCC_PLLCFGR_PLLN_0); - +#if defined(SAI1) /* Get Start Tick*/ tickstart = HAL_GetTick(); @@ -342,6 +352,7 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) } /* once PLLSAI1 is OFF, reset PLLSAI1CFGR register to default value */ WRITE_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLR_0 | RCC_PLLSAI1CFGR_PLLQ_0 | RCC_PLLSAI1CFGR_PLLP_1 | RCC_PLLSAI1CFGR_PLLN_0); +#endif /* Disable all interrupts */ CLEAR_REG(RCC->CIER); @@ -356,7 +367,7 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) SystemCoreClock = MSI_VALUE; /* Adapt Systick interrupt period */ - if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + if (HAL_InitTick(uwTickPrio) != HAL_OK) { return HAL_ERROR; } @@ -372,6 +383,7 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that * contains the configuration information for the RCC Oscillators. * @note The PLL is not disabled when used as system clock. + * @note The PLL source is not updated when used as PLLSAI1 clock source. * @retval HAL status */ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) @@ -379,7 +391,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) uint32_t tickstart; /* Check Null pointer */ - if(RCC_OscInitStruct == NULL) + if (RCC_OscInitStruct == NULL) { return HAL_ERROR; } @@ -441,7 +453,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /* Update the SystemCoreClock global variable */ SystemCoreClockUpdate(); - if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + if (HAL_InitTick(uwTickPrio) != HAL_OK) { return HAL_ERROR; } @@ -480,7 +492,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /* Get timeout */ tickstart = HAL_GetTick(); - /* Wait till MSI is ready */ + /* Wait till MSI is disabled */ while (LL_RCC_MSI_IsReady() != 0U) { if ((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) @@ -630,16 +642,16 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /* 1. Check LSI1 state and enable if required */ if (LL_RCC_LSI1_IsReady() == 0U) { - /* This is required to enable LSI1 before enabling LSI2 */ + /* This is required to enable LSI1 before enabling LSI2 */ __HAL_RCC_LSI1_ENABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till LSI1 is ready */ - while(LL_RCC_LSI1_IsReady() == 0U) + while (LL_RCC_LSI1_IsReady() == 0U) { - if((HAL_GetTick() - tickstart) > LSI1_TIMEOUT_VALUE) + if ((HAL_GetTick() - tickstart) > LSI1_TIMEOUT_VALUE) { return HAL_TIMEOUT; } @@ -854,78 +866,141 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /* Check the parameters */ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if (RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + if(RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) { - /* Check if the PLL is used as system clock or not */ - if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllconfig = RCC->PLLCFGR; + + /* PLL On ? */ + if(RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) { - if (RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Do nothing if PLL configuration is unchanged */ + if ((READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || + ((READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) != RCC_OscInitStruct->PLL.PLLN) || + (READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || + (READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ) || + (READ_BIT(temp_pllconfig, RCC_PLLCFGR_PLLR) != RCC_OscInitStruct->PLL.PLLR)) { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); - assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); - assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); - assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); - assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while (LL_RCC_PLL_IsReady() != 0U) + /* Check if the PLL is used as system clock or not */ + if (temp_sysclksrc != RCC_SYSCLKSOURCE_STATUS_PLLCLK) { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) +#if defined(SAI1) + /* Check if main PLL can be updated */ + /* Not possible if the source is shared by other enabled PLLSAIx */ + if (READ_BIT(RCC->CR, RCC_CR_PLLSAI1ON) != 0U) + { - return HAL_TIMEOUT; + return HAL_ERROR; } - } + else +#endif + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); - /* Configure the main PLL clock source, multiplication and division factors. */ - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLM, - RCC_OscInitStruct->PLL.PLLN, - RCC_OscInitStruct->PLL.PLLP, - RCC_OscInitStruct->PLL.PLLQ, - RCC_OscInitStruct->PLL.PLLR); + /* Get Start Tick*/ + tickstart = HAL_GetTick(); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } - /* Enable PLL System Clock output. */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); - /* Get Start Tick*/ - tickstart = HAL_GetTick(); + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); - /* Wait till PLL is ready */ - while (LL_RCC_PLL_IsReady() == 0U) + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else { - if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + /* PLL is already used as System core clock */ + return HAL_ERROR; + } + } + else + { + /* PLL configuration is unchanged */ + /* Re-enable PLL if it was disabled (ie. low power mode) */ + if (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) { - return HAL_TIMEOUT; + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } } } } - else + } + else + { + /* Check that PLL is not used as system clock or not */ + if (temp_sysclksrc != RCC_SYSCLKSOURCE_STATUS_PLLCLK) { /* Disable the main PLL. */ __HAL_RCC_PLL_DISABLE(); + /* Disable all PLL outputs to save power */ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSOURCE_NONE); +#if defined(SAI1) && defined(USB) __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLL_SYSCLK | RCC_PLL_USBCLK | RCC_PLL_SAI1CLK); - +#else + __HAL_RCC_PLLCLKOUT_DISABLE(RCC_PLL_SYSCLK); +#endif /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLL is disabled */ - while (LL_RCC_PLL_IsReady() != 0U) + while (READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) { if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) { @@ -933,19 +1008,9 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } } } - } - else - { - /* Do not return HAL_ERROR if request repeats the current configuration */ - uint32_t pllcfgr = RCC->PLLCFGR; - - if((READ_BIT(pllcfgr, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || - (READ_BIT(pllcfgr, RCC_PLLCFGR_PLLM) != RCC_OscInitStruct->PLL.PLLM) || - ((READ_BIT(pllcfgr, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos) != RCC_OscInitStruct->PLL.PLLN) || - (READ_BIT(pllcfgr, RCC_PLLCFGR_PLLP) != RCC_OscInitStruct->PLL.PLLP) || - (READ_BIT(pllcfgr, RCC_PLLCFGR_PLLQ) != RCC_OscInitStruct->PLL.PLLQ) || - (READ_BIT(pllcfgr, RCC_PLLCFGR_PLLR) != RCC_OscInitStruct->PLL.PLLR)) + else { + /* PLL is already used as System core clock */ return HAL_ERROR; } } @@ -955,7 +1020,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /** - * @brief Initialize the CPU, AHB and APB busses clocks according to the specified + * @brief Initialize the CPU, AHB and APB buses clocks according to the specified * parameters in the RCC_ClkInitStruct. * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that * contains the configuration information for the RCC peripheral. @@ -995,7 +1060,7 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui uint32_t tickstart; /* Check Null pointer */ - if(RCC_ClkInitStruct == NULL) + if (RCC_ClkInitStruct == NULL) { return HAL_ERROR; } @@ -1196,7 +1261,7 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui /* Update the SystemCoreClock global variable */ SystemCoreClockUpdate(); /* Configure the source of time base considering new system clocks settings*/ - return HAL_InitTick (HAL_GetTickPrio()); + return HAL_InitTick(HAL_GetTickPrio()); } /** @@ -1265,7 +1330,7 @@ void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_M GPIO_InitStruct.Pull = GPIO_NOPULL; /* RCC_MCO1 */ - if(RCC_MCOx == RCC_MCO1) + if (RCC_MCOx == RCC_MCO1) { /* MCO1 Clock Enable */ __MCO1_CLK_ENABLE(); @@ -1285,7 +1350,8 @@ void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_M HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); } - else +#if defined(RCC_MCO3_SUPPORT) + else if (RCC_MCOx == RCC_MCO3) { /* MCO3 Clock Enable */ __MCO3_CLK_ENABLE(); @@ -1294,9 +1360,14 @@ void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_M GPIO_InitStruct.Alternate = GPIO_AF6_MCO; HAL_GPIO_Init(MCO3_GPIO_PORT, &GPIO_InitStruct); } +#endif + else + { + ; + } - /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ - LL_RCC_ConfigMCO(RCC_MCOSource, RCC_MCODiv); + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO clock source and prescaler */ + LL_RCC_ConfigMCO(RCC_MCOSource, RCC_MCODiv); } /** @@ -1351,13 +1422,13 @@ uint32_t HAL_RCC_GetSysClockFreq(void) { /* HSE used as system clock source */ if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - sysclockfreq = HSE_VALUE / 2U; - } - else - { - sysclockfreq = HSE_VALUE; - } + { + sysclockfreq = HSE_VALUE / 2U; + } + else + { + sysclockfreq = HSE_VALUE; + } } else { @@ -1369,14 +1440,14 @@ uint32_t HAL_RCC_GetSysClockFreq(void) pllinputfreq = HSI_VALUE; break; case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ default: @@ -1664,7 +1735,7 @@ static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t MSI_Range) assert_param(IS_RCC_MSI_CLOCK_RANGE(MSI_Range)); /* MSI frequency range in Hz */ - if(MSI_Range > RCC_MSIRANGE_11) + if (MSI_Range > RCC_MSIRANGE_11) { msifreq = __LL_RCC_CALC_MSI_FREQ(RCC_MSIRANGE_11); } @@ -1675,7 +1746,11 @@ static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t MSI_Range) flash_clksrcfreq = __LL_RCC_CALC_HCLK4_FREQ(msifreq, LL_RCC_GetAHB4Prescaler()); +#if defined(PWR_CR1_VOS) return RCC_SetFlashLatency((flash_clksrcfreq / MEGA_HZ), HAL_PWREx_GetVoltageRange()); +#else + return RCC_SetFlashLatency((flash_clksrcfreq / MEGA_HZ), PWR_REGULATOR_VOLTAGE_SCALE1); +#endif } @@ -1689,13 +1764,16 @@ static HAL_StatusTypeDef RCC_SetFlashLatency(uint32_t Flash_ClkSrcFreq, uint32_t { /* Flash Clock source (HCLK4) range in MHz with a VCORE is range1 */ const uint32_t FLASH_CLK_SRC_RANGE_VOS1[] = {18UL, 36UL, 54UL, 64UL}; +#if defined(PWR_CR1_VOS) /* Flash Clock source (HCLK4) range in MHz with a VCORE is range2 */ const uint32_t FLASH_CLK_SRC_RANGE_VOS2[] = {6UL, 12UL, 16UL}; +#endif /* Flash Latency range */ const uint32_t FLASH_LATENCY_RANGE[] = {FLASH_LATENCY_0, FLASH_LATENCY_1, FLASH_LATENCY_2, FLASH_LATENCY_3}; uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ uint32_t tickstart; +#if defined(PWR_CR1_VOS) if (VCORE_Voltage == PWR_REGULATOR_VOLTAGE_SCALE1) { for (uint32_t index = 0; index < __COUNTOF(FLASH_CLK_SRC_RANGE_VOS1); index++) @@ -1718,6 +1796,16 @@ static HAL_StatusTypeDef RCC_SetFlashLatency(uint32_t Flash_ClkSrcFreq, uint32_t } } } +#else + for (uint32_t index = 0; index < __COUNTOF(FLASH_CLK_SRC_RANGE_VOS1); index++) + { + if (Flash_ClkSrcFreq <= FLASH_CLK_SRC_RANGE_VOS1[index]) + { + latency = FLASH_LATENCY_RANGE[index]; + break; + } + } +#endif __HAL_FLASH_SET_LATENCY(latency); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c index 5021368..b8cd418 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c @@ -42,7 +42,9 @@ /** @defgroup RCCEx_Private_Constants RCCEx Private Constants * @{ */ +#if defined(SAI1) #define PLLSAI1_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#endif #define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ #define CLOCKSMPS_TIMEOUT_VALUE (5000U) /* 5 s */ @@ -55,9 +57,11 @@ #define LSCO2_GPIO_PORT GPIOH #define LSCO2_PIN GPIO_PIN_3 +#if defined(RCC_LSCO3_SUPPORT) #define __LSCO3_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define LSCO3_GPIO_PORT GPIOC #define LSCO3_PIN GPIO_PIN_12 +#endif #define LSI2_TIMEOUT_VALUE (3U) /* to be adjusted with DS */ @@ -71,17 +75,20 @@ /** @defgroup RCCEx_Private_Functions RCCEx Private Functions * @{ */ +#if defined(SAI1) static HAL_StatusTypeDef RCCEx_PLLSAI1_ConfigNP(RCC_PLLSAI1InitTypeDef *PLLSAI1); static HAL_StatusTypeDef RCCEx_PLLSAI1_ConfigNQ(RCC_PLLSAI1InitTypeDef *PLLSAI1); static HAL_StatusTypeDef RCCEx_PLLSAI1_ConfigNR(RCC_PLLSAI1InitTypeDef *PLLSAI1); +#endif static uint32_t RCC_PLL_GetFreqDomain_P(void); static uint32_t RCC_PLL_GetFreqDomain_Q(void); +#if defined(SAI1) static uint32_t RCC_PLLSAI1_GetFreqDomain_R(void); static uint32_t RCC_PLLSAI1_GetFreqDomain_P(void); static uint32_t RCC_PLLSAI1_GetFreqDomain_Q(void); - +#endif /** * @} @@ -125,16 +132,14 @@ static uint32_t RCC_PLLSAI1_GetFreqDomain_Q(void); * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock - * * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock - * * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock - * * @arg @ref RCC_PERIPHCLK_RFWAKEUP RFWKP peripheral clock * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock * * * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select @@ -151,6 +156,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* Check the parameters */ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); +#if defined(SAI1) /*-------------------------- SAI1 clock source configuration ---------------------*/ if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) { @@ -166,12 +172,13 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* SAI1 clock source config set later after clock selection check */ break; +#if defined(SAI1) case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1 */ /* PLLSAI1 parameters N & P configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_ConfigNP(&(PeriphClkInit->PLLSAI1)); /* SAI1 clock source config set later after clock selection check */ break; - +#endif case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock*/ /* SAI1 clock source config set later after clock selection check */ @@ -197,6 +204,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk status = ret; } } +#endif /*-------------------------- RTC clock source configuration ----------------------*/ if ((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) @@ -207,13 +215,13 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); /* Configure the clock source only if a different source is expected */ - if(rtcclocksource != PeriphClkInit->RTCClockSelection) + if (rtcclocksource != PeriphClkInit->RTCClockSelection) { /* Enable write access to Backup domain */ HAL_PWR_EnableBkUpAccess(); /* If a clock source is not yet selected */ - if(rtcclocksource == RCC_RTCCLKSOURCE_NONE) + if (rtcclocksource == RCC_RTCCLKSOURCE_NONE) { /* Directly set the configuration of the clock source selection */ LL_RCC_SetRTCClockSource(PeriphClkInit->RTCClockSelection); @@ -272,7 +280,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); } - +#if defined(LPUART1) /*-------------------------- LPUART1 clock source configuration ------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) { @@ -282,6 +290,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* Configure the LPUAR1 clock source */ __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); } +#endif /*-------------------------- LPTIM1 clock source configuration -------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) @@ -307,6 +316,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); } +#if defined(I2C3) /*-------------------------- I2C3 clock source configuration ---------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) { @@ -316,9 +326,10 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* Configure the I2C3 clock source */ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); } +#endif +#if defined(USB) /*-------------------------- USB clock source configuration ----------------------*/ - if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) { assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); @@ -329,26 +340,36 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* Enable PLLQ output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_USBCLK); } +#if defined(SAI1) + if (PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 parameters N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_ConfigNQ(&(PeriphClkInit->PLLSAI1)); - if (PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) + if (ret != HAL_OK) { - /* PLLSAI1 parameters N & Q configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_ConfigNQ(&(PeriphClkInit->PLLSAI1)); - - if (ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } + /* set overall return value */ + status = ret; } } +#endif + } +#endif /*-------------------------- RNG clock source configuration ----------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) { + /* Check the parameters */ assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + + /* Configure the RNG clock source */ __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + if (PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLLQ output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_RNGCLK); + } } /*-------------------------- ADC clock source configuration ----------------------*/ @@ -366,18 +387,20 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_ADCCLK); } - if (PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) - { - /* PLLSAI1 parameters N & R configuration and clock output (PLLSAI1ClockOut) */ - ret = RCCEx_PLLSAI1_ConfigNR(&(PeriphClkInit->PLLSAI1)); +#if defined(SAI1) + if (PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 parameters N & R configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_ConfigNR(&(PeriphClkInit->PLLSAI1)); - if (ret != HAL_OK) - { - /* set overall return value */ - status = ret; - } + if (ret != HAL_OK) + { + /* set overall return value */ + status = ret; } } +#endif + } /*-------------------------- RFWKP clock source configuration ----------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP) @@ -390,6 +413,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk } +#if defined(RCC_SMPS_SUPPORT) /*-------------------------- SMPS clock source configuration ----------------------*/ if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS) { @@ -402,8 +426,26 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk /* Configure the SMPS interface clock source */ __HAL_RCC_SMPS_CONFIG(PeriphClkInit->SmpsClockSelection); + } +#endif + +#if defined(SPI_I2S_SUPPORT) + /*-------------------- I2S clock source configuration ----------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) + { + /* Check the parameters */ + assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection)); + /* Configure the I2S clock source */ + __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection); + + if (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLL) + { + /* Enable RCC_PLL_I2SCLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_I2SCLK); + } } +#endif return status; } @@ -414,34 +456,64 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that * returns the configuration information for the Extended Peripherals * clocks(SAI1, LPTIM1, LPTIM2, I2C1, I2C3, LPUART1, - * USART1, RTC, ADCx, USB, RNG, RFWKP, SMPS). + * USART1, RTC, ADCx, USB, RNG, RFWKP, SMPS, I2S). * @retval None */ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) { /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ - RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ - RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RFWAKEUP | \ - RCC_PERIPHCLK_SMPS; + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RFWAKEUP; +#if defined(LPUART1) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LPUART1; +#endif + +#if defined(I2C3) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C3; +#endif + +#if defined(SAI1) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI1; +#endif + +#if defined(USB) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; +#endif + +#if defined(RCC_SMPS_SUPPORT) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SMPS; +#endif + +#if defined(SPI_I2S_SUPPORT) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S; +#endif + +#if defined(SAI1) /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ PeriphClkInit->PLLSAI1.PLLN = LL_RCC_PLLSAI1_GetN(); PeriphClkInit->PLLSAI1.PLLP = LL_RCC_PLLSAI1_GetP(); PeriphClkInit->PLLSAI1.PLLR = LL_RCC_PLLSAI1_GetR(); PeriphClkInit->PLLSAI1.PLLQ = LL_RCC_PLLSAI1_GetQ(); +#endif /* Get the USART1 clock source ---------------------------------------------*/ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); +#if defined(LPUART1) /* Get the LPUART1 clock source --------------------------------------------*/ PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#endif /* Get the I2C1 clock source -----------------------------------------------*/ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#if defined(I2C3) /* Get the I2C3 clock source -----------------------------------------------*/ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); +#endif /* Get the LPTIM1 clock source ---------------------------------------------*/ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); @@ -449,17 +521,21 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) /* Get the LPTIM2 clock source ---------------------------------------------*/ PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); +#if defined(SAI1) /* Get the SAI1 clock source -----------------------------------------------*/ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#endif /* Get the RTC clock source ------------------------------------------------*/ PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); +#if defined(USB) /* Get the USB clock source ------------------------------------------------*/ PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* Get the RNG clock source ------------------------------------------------*/ - PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); + PeriphClkInit->RngClockSelection = HAL_RCCEx_GetRngCLKSource(); /* Get the ADC clock source ------------------------------------------------*/ PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); @@ -467,11 +543,18 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) /* Get the RFWKP clock source ----------------------------------------------*/ PeriphClkInit->RFWakeUpClockSelection = __HAL_RCC_GET_RFWAKEUP_SOURCE(); +#if defined(RCC_SMPS_SUPPORT) /* Get the SMPS clock division factor --------------------------------------*/ PeriphClkInit->SmpsDivSelection = __HAL_RCC_GET_SMPS_DIV(); /* Get the SMPS clock source -----------------------------------------------*/ PeriphClkInit->SmpsClockSelection = __HAL_RCC_GET_SMPS_SOURCE(); +#endif + +#if defined(SPI_I2S_SUPPORT) + /* Get the I2S clock source -----------------------------------------------*/ + PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2S_SOURCE(); +#endif } /** @@ -490,24 +573,27 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock - * * @arg @ref RCC_PERIPHCLK_RFWAKEUP RFWKP peripheral clock * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock + * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock * @retval Frequency in Hz */ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) { - uint32_t frequency; + uint32_t frequency = 0U; + +#if defined(RCC_SMPS_SUPPORT) uint32_t smps_prescaler_index = ((LL_RCC_GetSMPSPrescaler()) >> RCC_SMPSCR_SMPSDIV_Pos); +#endif /* Check the parameters */ assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); - if(PeriphClk == RCC_PERIPHCLK_RTC) + if (PeriphClk == RCC_PERIPHCLK_RTC) { uint32_t rtcClockSource = LL_RCC_GetRTCClockSource(); - if(rtcClockSource == LL_RCC_RTC_CLKSOURCE_LSE) /* LSE clock used as RTC clock source */ + if (rtcClockSource == LL_RCC_RTC_CLKSOURCE_LSE) /* LSE clock used as RTC clock source */ { if (LL_RCC_LSE_IsReady() == 1U) { @@ -515,10 +601,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if(rtcClockSource == LL_RCC_RTC_CLKSOURCE_LSI) /* LSI clock used as RTC clock source */ + else if (rtcClockSource == LL_RCC_RTC_CLKSOURCE_LSI) /* LSI clock used as RTC clock source */ { const uint32_t temp_lsi1ready = LL_RCC_LSI1_IsReady(); const uint32_t temp_lsi2ready = LL_RCC_LSI2_IsReady(); @@ -528,7 +614,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else if (rtcClockSource == LL_RCC_RTC_CLKSOURCE_HSE_DIV32) /* HSE clock used as RTC clock source */ @@ -537,56 +623,60 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else /* No clock used as RTC clock source */ { - frequency = 0; + /* Nothing to do as frequency already initialized to 0U */ } } +#if defined(SAI1) else if (PeriphClk == RCC_PERIPHCLK_SAI1) { switch (LL_RCC_GetSAIClockSource(LL_RCC_SAI1_CLKSOURCE)) { - case LL_RCC_SAI1_CLKSOURCE_HSI: /* HSI clock used as SAI1 clock source */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_SAI1_CLKSOURCE_HSI: /* HSI clock used as SAI1 clock source */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - case LL_RCC_SAI1_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SAI1 clock source */ - if (LL_RCC_PLLSAI1_IsReady() == 1U) - { - frequency = RCC_PLLSAI1_GetFreqDomain_P(); - } - else - { - frequency = 0U; - } - break; +#if defined(SAI1) + case LL_RCC_SAI1_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SAI1 clock source */ + if (LL_RCC_PLLSAI1_IsReady() == 1U) + { + frequency = RCC_PLLSAI1_GetFreqDomain_P(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif - case LL_RCC_SAI1_CLKSOURCE_PLL: /* PLL clock used as SAI1 clock source */ - if (LL_RCC_PLL_IsReady() == 1U) - { - frequency = RCC_PLL_GetFreqDomain_P(); - } - else - { - frequency = 0U; - } - break; + case LL_RCC_SAI1_CLKSOURCE_PLL: /* PLL clock used as SAI1 clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + frequency = RCC_PLL_GetFreqDomain_P(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* External input clock used as SAI1 clock source */ - frequency = EXTERNAL_SAI1_CLOCK_VALUE; - break; + default: /* External input clock used as SAI1 clock source */ + frequency = EXTERNAL_SAI1_CLOCK_VALUE; + break; } } - else if(PeriphClk == RCC_PERIPHCLK_RNG) +#endif + else if (PeriphClk == RCC_PERIPHCLK_RNG) { - uint32_t rngClockSource = LL_RCC_GetRNGClockSource(LL_RCC_RNG_CLKSOURCE); + uint32_t rngClockSource = HAL_RCCEx_GetRngCLKSource(); - if(rngClockSource == LL_RCC_RNG_CLKSOURCE_LSI) /* LSI clock used as RNG clock source */ + if (rngClockSource == RCC_RNGCLKSOURCE_LSI) /* LSI clock used as RNG clock source */ { const uint32_t temp_lsi1ready = LL_RCC_LSI1_IsReady(); const uint32_t temp_lsi2ready = LL_RCC_LSI2_IsReady(); @@ -596,10 +686,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if(rngClockSource == LL_RCC_RNG_CLKSOURCE_LSE) /* LSE clock used as RNG clock source */ + else if (rngClockSource == RCC_RNGCLKSOURCE_LSE) /* LSE clock used as RNG clock source */ { if (LL_RCC_LSE_IsReady() == 1U) { @@ -607,271 +697,273 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else /* CLK48 clock used as RNG clock source */ + else if (rngClockSource == RCC_RNGCLKSOURCE_PLL) /* PLL clock divided by 3 used as RNG clock source */ { - switch (LL_RCC_GetUSBClockSource(LL_RCC_USB_CLKSOURCE)) + if (LL_RCC_PLL_IsReady() == 1U) { - case LL_RCC_USB_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as USB clock source */ - if (LL_RCC_PLLSAI1_IsReady() == 1U) - { - frequency = RCC_PLLSAI1_GetFreqDomain_Q(); - } - else - { - frequency = 0U; - } - break; - - case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ - if (LL_RCC_PLL_IsReady() == 1U) - { - frequency = RCC_PLL_GetFreqDomain_Q(); - } - else - { - frequency = 0U; - } - break; - - case LL_RCC_USB_CLKSOURCE_MSI: /* MSI clock used as USB clock source */ - if (LL_RCC_MSI_IsReady() == 1U) - { - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); - } - else - { - frequency = 0U; - } - break; - - default: /* HSI48 clock used as USB clock source */ - if (LL_RCC_HSI48_IsReady() == 1U) - { - frequency = HSI48_VALUE; - } - else - { - frequency = 0U; - } - break; + frequency = (RCC_PLL_GetFreqDomain_Q() / 3U); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else if (rngClockSource == RCC_RNGCLKSOURCE_MSI) /* MSI clock divided by 3 used as RNG clock source */ + { + if (LL_RCC_MSI_IsReady() == 1U) + { + frequency = (__LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()) / 3U); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + } + else /* HSI48 clock divided by 3 used as RNG clock source */ + { + if (LL_RCC_HSI48_IsReady() == 1U) + { + frequency = HSI48_VALUE / 3U; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ } - frequency = frequency / 3U; } } +#if defined(USB) else if (PeriphClk == RCC_PERIPHCLK_USB) { switch (LL_RCC_GetUSBClockSource(LL_RCC_USB_CLKSOURCE)) { - case LL_RCC_USB_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as USB clock source */ - if (LL_RCC_PLLSAI1_IsReady() == 1U) - { - frequency = RCC_PLLSAI1_GetFreqDomain_Q(); - } - else - { - frequency = 0U; - } - break; +#if defined(SAI1) + case LL_RCC_USB_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as USB clock source */ + if (LL_RCC_PLLSAI1_IsReady() == 1U) + { + frequency = RCC_PLLSAI1_GetFreqDomain_Q(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif - case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ - if (LL_RCC_PLL_IsReady() == 1U) - { - frequency = RCC_PLL_GetFreqDomain_Q(); - } - else - { - frequency = 0U; - } - break; + case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + frequency = RCC_PLL_GetFreqDomain_Q(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - case LL_RCC_USB_CLKSOURCE_MSI: /* MSI clock used as USB clock source */ - if (LL_RCC_MSI_IsReady() == 1U) - { - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); - } - else - { - frequency = 0U; - } - break; + case LL_RCC_USB_CLKSOURCE_MSI: /* MSI clock used as USB clock source */ + if (LL_RCC_MSI_IsReady() == 1U) + { + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* HSI48 clock used as USB clock source */ - if (LL_RCC_HSI48_IsReady() == 1U) - { - frequency = HSI48_VALUE; - } - else - { - frequency = 0U; - } - break; + default: /* HSI48 clock used as USB clock source */ + if (LL_RCC_HSI48_IsReady() == 1U) + { + frequency = HSI48_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; } } +#endif else if (PeriphClk == RCC_PERIPHCLK_USART1) { switch (LL_RCC_GetUSARTClockSource(LL_RCC_USART1_CLKSOURCE)) { - case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ - frequency = HAL_RCC_GetSysClockFreq(); - break; + case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */ + frequency = HAL_RCC_GetSysClockFreq(); + break; - case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady() == 1U) - { - frequency = LSE_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + frequency = LSE_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* USART1 Clock is PCLK2 */ - frequency = __LL_RCC_CALC_PCLK2_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ - LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB2Prescaler()); - break; + default: /* USART1 Clock is PCLK2 */ + frequency = __LL_RCC_CALC_PCLK2_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ + LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB2Prescaler()); + break; } } +#if defined(LPUART1) else if (PeriphClk == RCC_PERIPHCLK_LPUART1) { switch (LL_RCC_GetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE)) { - case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */ - frequency = HAL_RCC_GetSysClockFreq(); - break; + case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */ + frequency = HAL_RCC_GetSysClockFreq(); + break; - case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */ - if (LL_RCC_LSE_IsReady() == 1U) - { - frequency = LSE_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + frequency = LSE_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* LPUART1 Clock is PCLK1 */ - frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ - LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); - break; + default: /* LPUART1 Clock is PCLK1 */ + frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ + LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); + break; } } +#endif else if (PeriphClk == RCC_PERIPHCLK_ADC) { switch (LL_RCC_GetADCClockSource(LL_RCC_ADC_CLKSOURCE)) { - case LL_RCC_ADC_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as ADC clock source */ - if (LL_RCC_PLLSAI1_IsReady() == 1U) - { - frequency = RCC_PLLSAI1_GetFreqDomain_R(); - } - else - { - frequency = 0U; - } - break; - - case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ - frequency = HAL_RCC_GetSysClockFreq(); - break; +#if defined(STM32WB55xx) || defined (STM32WB5Mxx) + case LL_RCC_ADC_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as ADC clock source */ + if (LL_RCC_PLLSAI1_IsReady() == 1U) + { + frequency = RCC_PLLSAI1_GetFreqDomain_R(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#elif defined(STM32WB35xx) + case LL_RCC_ADC_CLKSOURCE_HSI: /* HSI clock used as ADC clock source */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; +#endif + case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ + frequency = HAL_RCC_GetSysClockFreq(); + break; - case LL_RCC_ADC_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ - if (LL_RCC_PLL_IsReady() == 1U) - { - frequency = RCC_PLL_GetFreqDomain_P(); - } - else - { - frequency = 0U; - } - break; + case LL_RCC_ADC_CLKSOURCE_PLL: /* PLL clock used as ADC clock source */ + if (LL_RCC_PLL_IsReady() == 1U) + { + frequency = RCC_PLL_GetFreqDomain_P(); + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* No clock used as ADC clock source */ - frequency = 0; - break; + default: /* No clock used as ADC clock source */ + break; } } else if (PeriphClk == RCC_PERIPHCLK_I2C1) { switch (LL_RCC_GetI2CClockSource(LL_RCC_I2C1_CLKSOURCE)) { - case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ - frequency = HAL_RCC_GetSysClockFreq(); - break; + case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */ + frequency = HAL_RCC_GetSysClockFreq(); + break; - case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* I2C1 Clock is PCLK1 */ - frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ - LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); - break; + default: /* I2C1 Clock is PCLK1 */ + frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ + LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); + break; } } +#if defined(I2C3) else if (PeriphClk == RCC_PERIPHCLK_I2C3) { switch (LL_RCC_GetI2CClockSource(LL_RCC_I2C3_CLKSOURCE)) { - case LL_RCC_I2C3_CLKSOURCE_SYSCLK: /* I2C3 Clock is System Clock */ - frequency = HAL_RCC_GetSysClockFreq(); - break; + case LL_RCC_I2C3_CLKSOURCE_SYSCLK: /* I2C3 Clock is System Clock */ + frequency = HAL_RCC_GetSysClockFreq(); + break; - case LL_RCC_I2C3_CLKSOURCE_HSI: /* I2C3 Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - else - { - frequency = 0U; - } - break; + case LL_RCC_I2C3_CLKSOURCE_HSI: /* I2C3 Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; - default: /* I2C3 Clock is PCLK1 */ - frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ - LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); - break; + default: /* I2C3 Clock is PCLK1 */ + frequency = __LL_RCC_CALC_PCLK1_FREQ(__LL_RCC_CALC_HCLK1_FREQ(HAL_RCC_GetSysClockFreq(), \ + LL_RCC_GetAHBPrescaler()), LL_RCC_GetAPB1Prescaler()); + break; } } +#endif else if (PeriphClk == RCC_PERIPHCLK_LPTIM1) { uint32_t lptimClockSource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE); - if(lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_LSI) /* LPTIM1 Clock is LSI Osc. */ + if (lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_LSI) /* LPTIM1 Clock is LSI Osc. */ { const uint32_t temp_lsi1ready = LL_RCC_LSI1_IsReady(); const uint32_t temp_lsi2ready = LL_RCC_LSI2_IsReady(); @@ -881,10 +973,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if( lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_HSI) /* LPTIM1 Clock is HSI Osc. */ + else if (lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_HSI) /* LPTIM1 Clock is HSI Osc. */ { if (LL_RCC_HSI_IsReady() == 1U) { @@ -892,10 +984,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if(lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_LSE) /* LPTIM1 Clock is LSE Osc. */ + else if (lptimClockSource == LL_RCC_LPTIM1_CLKSOURCE_LSE) /* LPTIM1 Clock is LSE Osc. */ { if (LL_RCC_LSE_IsReady() == 1U) { @@ -903,7 +995,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else /* LPTIM1 Clock is PCLK1 */ @@ -915,7 +1007,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) { uint32_t lptimClockSource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE); - if( lptimClockSource == LL_RCC_LPTIM2_CLKSOURCE_LSI) /* LPTIM2 Clock is LSI Osc. */ + if (lptimClockSource == LL_RCC_LPTIM2_CLKSOURCE_LSI) /* LPTIM2 Clock is LSI Osc. */ { const uint32_t temp_lsi1ready = LL_RCC_LSI1_IsReady(); const uint32_t temp_lsi2ready = LL_RCC_LSI2_IsReady(); @@ -925,7 +1017,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else if (lptimClockSource == LL_RCC_LPTIM2_CLKSOURCE_HSI) /* LPTIM2 Clock is HSI Osc. */ @@ -936,7 +1028,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else if (lptimClockSource == LL_RCC_LPTIM2_CLKSOURCE_LSE) /* LPTIM2 Clock is LSE Osc. */ @@ -947,7 +1039,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else /* LPTIM2 Clock is PCLK1 */ @@ -967,7 +1059,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else if (rfwkpClockSource == LL_RCC_RFWKP_CLKSOURCE_LSI) /* LSI clock used as RF Wakeup clock source */ @@ -980,7 +1072,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } else if (rfwkpClockSource == LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024) /* HSE clock used as RF Wakeup clock source */ @@ -989,14 +1081,15 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else /* No clock used as RF Wakeup clock source */ { - frequency = 0; + /* Nothing to do as frequency already initialized to 0U */ } } +#if defined(RCC_SMPS_SUPPORT) else if (PeriphClk == RCC_PERIPHCLK_SMPS) { uint32_t smpsClockSource = LL_RCC_GetSMPSClockSource(); - if(smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSI) /* SMPS Clock source is HSI Osc. */ + if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSI) /* SMPS Clock source is HSI Osc. */ { if (LL_RCC_HSI_IsReady() == 1U) { @@ -1005,10 +1098,10 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if(smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSE) /* SMPS Clock source is HSE Osc. */ + else if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSE) /* SMPS Clock source is HSE Osc. */ { if (LL_RCC_HSE_IsReady() == 1U) { @@ -1017,43 +1110,89 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else if(smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_MSI) /* SMPS Clock source is MSI Osc. */ + else if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_MSI) /* SMPS Clock source is MSI Osc. */ { switch (LL_RCC_MSI_GetRange()) { - case LL_RCC_MSIRANGE_8: - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_8) / SmpsPrescalerTable[smps_prescaler_index][4]; - break; - case LL_RCC_MSIRANGE_9: - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_9) / SmpsPrescalerTable[smps_prescaler_index][3]; - break; - case LL_RCC_MSIRANGE_10: - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_10) / SmpsPrescalerTable[smps_prescaler_index][2]; - break; - case LL_RCC_MSIRANGE_11: - frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_11) / SmpsPrescalerTable[smps_prescaler_index][1]; - break; - default: - frequency = 0U; - break; + case LL_RCC_MSIRANGE_8: + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_8) / SmpsPrescalerTable[smps_prescaler_index][4]; + break; + case LL_RCC_MSIRANGE_9: + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_9) / SmpsPrescalerTable[smps_prescaler_index][3]; + break; + case LL_RCC_MSIRANGE_10: + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_10) / SmpsPrescalerTable[smps_prescaler_index][2]; + break; + case LL_RCC_MSIRANGE_11: + frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_11) / SmpsPrescalerTable[smps_prescaler_index][1]; + break; + default: + break; } frequency = frequency >> 1U; /* Systematic Div by 2 */ } else /* SMPS has no Clock */ { - frequency = 0U; + /* Nothing to do as frequency already initialized to 0U */ } } - else +#endif +#if defined(SPI_I2S_SUPPORT) + if (PeriphClk == RCC_PERIPHCLK_I2S) { - frequency = 0U; + switch (LL_RCC_GetI2SClockSource(LL_RCC_I2S_CLKSOURCE)) + { + case LL_RCC_I2S_CLKSOURCE_PIN: /* I2S Clock is External clock */ + frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S_CLKSOURCE_HSI: /* I2S Clock is HSI Osc. */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + break; + + case LL_RCC_I2S_CLKSOURCE_PLL: /* I2S Clock is PLL */ + frequency = RCC_PLL_GetFreqDomain_P(); + break; + + case LL_RCC_I2S_CLKSOURCE_NONE: /* No clock used as I2S clock source */ + default: + break; + } } +#endif return (frequency); } +/** + * @brief Return the RNG clock source + * @retval The RNG clock source can be one of the following values: + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI clock divided by 3 selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_LSI LSI clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_LSE LSE clock selected as RNG clock + */ +uint32_t HAL_RCCEx_GetRngCLKSource(void) +{ + uint32_t rng_clock_source = LL_RCC_GetRNGClockSource(LL_RCC_RNG_CLKSOURCE); + uint32_t clk48_clock_source; + + /* RNG clock source originates from 48 MHz RC oscillator */ + if (rng_clock_source == RCC_RNGCLKSOURCE_CLK48) + { + clk48_clock_source = LL_RCC_GetCLK48ClockSource(LL_RCC_CLK48_CLKSOURCE); + rng_clock_source = (CLK48_MASK | clk48_clock_source); + } + + return rng_clock_source; +} + /** * @} */ @@ -1073,6 +1212,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) * @{ */ +#if defined(SAI1) /** * @brief Enable PLLSAI1. * @param PLLSAI1Init pointer to an RCC_PLLSAI1InitTypeDef structure that @@ -1161,10 +1301,11 @@ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void) } /* Disable the PLLSAI1 Clock outputs */ - __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1_SAI1CLK | RCC_PLLSAI1_USBCLK | RCC_PLLSAI1_RNGCLK | RCC_PLLSAI1_ADCCLK); + __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1_SAI1CLK | RCC_PLLSAI1_USBCLK | RCC_PLLSAI1_ADCCLK); return status; } +#endif /***********************************************************************************************/ @@ -1263,7 +1404,7 @@ __weak void HAL_RCCEx_LSECSS_Callback(void) * @note PA2, PH3 or PC12 should be configured in alternate function mode. * @param RCC_LSCOx specifies the output direction for the clock source. * @arg @ref RCC_LSCO1 Clock source to output on LSCO1 pin(PA2) - * @arg @ref RCC_LSCO2 Clock source to output on LSCO2 pin(PH13) + * @arg @ref RCC_LSCO2 Clock source to output on LSCO2 pin(PH3) * @arg @ref RCC_LSCO3 Clock source to output on LSCO3 pin(PC12) * @param RCC_LSCOSource specifies the clock source to output. * This parameter can be one of the following values: @@ -1287,7 +1428,7 @@ void HAL_RCCEx_LSCOConfig(uint32_t RCC_LSCOx, uint32_t RCC_LSCOSource) GPIO_InitStruct.Pull = GPIO_NOPULL; /* RCC_LSCO1 */ - if(RCC_LSCOx == RCC_LSCO1) + if (RCC_LSCOx == RCC_LSCO1) { /* LSCO1 Clock Enable */ __LSCO1_CLK_ENABLE(); @@ -1307,7 +1448,8 @@ void HAL_RCCEx_LSCOConfig(uint32_t RCC_LSCOx, uint32_t RCC_LSCOSource) HAL_GPIO_Init(LSCO2_GPIO_PORT, &GPIO_InitStruct); } - else +#if defined(RCC_LSCO3_SUPPORT) + else if (RCC_LSCOx == RCC_LSCO3) { /* LSCO3 Clock Enable */ __LSCO3_CLK_ENABLE(); @@ -1316,24 +1458,29 @@ void HAL_RCCEx_LSCOConfig(uint32_t RCC_LSCOx, uint32_t RCC_LSCOSource) GPIO_InitStruct.Alternate = GPIO_AF6_LSCO; HAL_GPIO_Init(LSCO3_GPIO_PORT, &GPIO_InitStruct); } +#endif + else + { + ; + } - /* Update LSCOSEL clock source in Backup Domain control register */ - if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) - { - HAL_PWR_EnableBkUpAccess(); - backupchanged = SET; - } - else - { - backupchanged = RESET; - } + /* Update LSCOSEL clock source in Backup Domain control register */ + if (HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + else + { + backupchanged = RESET; + } - MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, RCC_LSCOSource | RCC_BDCR_LSCOEN); + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, RCC_LSCOSource | RCC_BDCR_LSCOEN); - if (backupchanged == SET) - { - HAL_PWR_DisableBkUpAccess(); - } + if (backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } } @@ -1448,12 +1595,12 @@ void HAL_RCCEx_DisableMSIPLLMode(void) */ HAL_StatusTypeDef HAL_RCCEx_TrimOsc(uint32_t OscillatorType) { - #define FTLSI2TRIM (0xFUL) +#define FTLSI2TRIM (0xFUL) HAL_StatusTypeDef status = HAL_OK; assert_param(IS_RCC_TRIMOSC(OscillatorType)); - if(OscillatorType == RCC_OSCILLATORTYPE_LSI2) + if (OscillatorType == RCC_OSCILLATORTYPE_LSI2) { if (LL_RCC_LSI2_IsReady() == 1U) { @@ -1478,7 +1625,7 @@ HAL_StatusTypeDef HAL_RCCEx_TrimOsc(uint32_t OscillatorType) * @} */ - +#if defined(CRS) /** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions * @brief Extended Clock Recovery System Control functions * @@ -1646,7 +1793,7 @@ uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) { if (Timeout != HAL_MAX_DELAY) { - if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { crsstatus = RCC_CRS_TIMEOUT; } @@ -1833,6 +1980,7 @@ __weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) /** * @} */ +#endif /** * @} @@ -1842,6 +1990,7 @@ __weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) * @{ */ +#if defined(SAI1) /** * @brief Configure the parameters N & P of PLLSAI1 and enable PLLSAI1 output clock(s). * @param PLLSAI1 pointer to an RCC_PLLSAI1InitTypeDef structure that @@ -2046,6 +2195,7 @@ static HAL_StatusTypeDef RCCEx_PLLSAI1_ConfigNR(RCC_PLLSAI1InitTypeDef *PLLSAI1) return status; } +#endif /** * @brief Return PLL clock (PLLPCLK) frequency used for SAI domain @@ -2085,7 +2235,7 @@ static uint32_t RCC_PLL_GetFreqDomain_P(void) pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_GetRange()); break; } - return __LL_RCC_CALC_PLLCLK_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + return __LL_RCC_CALC_PLLCLK_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); } @@ -2114,14 +2264,14 @@ static uint32_t RCC_PLL_GetFreqDomain_Q(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; @@ -2133,6 +2283,7 @@ static uint32_t RCC_PLL_GetFreqDomain_Q(void) LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); } +#if defined(SAI1) /** * @brief Return PLLSAI1 clock (PLLSAI1RCLK) frequency used for ADC domain * @retval PLLSAI1RCLK clock frequency (in Hz) @@ -2197,14 +2348,14 @@ static uint32_t RCC_PLLSAI1_GetFreqDomain_P(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; default: @@ -2238,14 +2389,14 @@ static uint32_t RCC_PLLSAI1_GetFreqDomain_Q(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; default: @@ -2255,7 +2406,7 @@ static uint32_t RCC_PLLSAI1_GetFreqDomain_Q(void) return __LL_RCC_CALC_PLLSAI1_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), LL_RCC_PLLSAI1_GetN(), LL_RCC_PLLSAI1_GetQ()); } - +#endif /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rng.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rng.c index 8e7f099..68e182b 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rng.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rng.c @@ -308,7 +308,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Call if (pCallback == NULL) { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ @@ -332,7 +332,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Call default : /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; @@ -352,7 +352,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Call default : /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; @@ -361,7 +361,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Call else { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } @@ -407,7 +407,7 @@ HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Ca default : /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; @@ -427,7 +427,7 @@ HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Ca default : /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; break; @@ -436,7 +436,7 @@ HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_Ca else { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } @@ -460,7 +460,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRN if (pCallback == NULL) { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; return HAL_ERROR; } /* Process locked */ @@ -473,7 +473,7 @@ HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRN else { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } @@ -503,7 +503,7 @@ HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) else { /* Update the error code */ - hrng->ErrorCode |= HAL_RNG_ERROR_INVALID_CALLBACK; + hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK; /* Return error status */ status = HAL_ERROR; } @@ -537,8 +537,16 @@ HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng) /** * @brief Generates a 32-bit random number. - * @note Each time the random number data is read the RNG_FLAG_DRDY flag - * is automatically cleared. + * @note This function checks value of RNG_FLAG_DRDY flag to know if valid + * random number is available in the DR register (RNG_FLAG_DRDY flag set + * whenever a random number is available through the RNG_DR register). + * After transitioning from 0 to 1 (random number available), + * RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading + * four words from the RNG_DR register, i.e. further function calls + * will immediately return a new u32 random number (additional words are + * available and can be read by the application, till RNG_FLAG_DRDY flag remains high). + * @note When no more random number data is available in DR register, RNG_FLAG_DRDY + * flag is automatically cleared. * @param hrng pointer to a RNG_HandleTypeDef structure that contains * the configuration information for RNG. * @param random32bit pointer to generated random number variable if successful. @@ -568,7 +576,7 @@ HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) { hrng->State = HAL_RNG_STATE_READY; - hrng->ErrorCode |= HAL_RNG_ERROR_TIMEOUT; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrng); return HAL_ERROR; @@ -583,6 +591,7 @@ HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t } else { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } @@ -619,6 +628,7 @@ HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng) /* Process Unlocked */ __HAL_UNLOCK(hrng); + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; status = HAL_ERROR; } @@ -653,10 +663,14 @@ void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng) /* RNG clock error interrupt occurred */ if (__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_CLOCK; rngclockerror = 1U; } else if (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET) { + /* Update the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_SEED; rngclockerror = 1U; } else @@ -721,6 +735,11 @@ uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng) /** * @brief Data Ready callback in non-blocking mode. + * @note When RNG_FLAG_DRDY flag value is set, first random number has been read + * from DR register in IRQ Handler and is provided as callback parameter. + * Depending on valid data available in the conditioning output buffer, + * additional words can be read by the application from DR register till + * DRDY bit remains high. * @param hrng pointer to a RNG_HandleTypeDef structure that contains * the configuration information for RNG. * @param random32bit generated random number. diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c index b360309..4176f9a 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c @@ -256,9 +256,13 @@ HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) hrtc->AlarmBEventCallback = HAL_RTCEx_AlarmBEventCallback; /* Legacy weak AlarmBEventCallback */ hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ +#if defined(RTC_TAMPER1_SUPPORT) hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ +#endif hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ +#if defined(RTC_TAMPER3_SUPPORT) hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ +#endif if(hrtc->MspInitCallback == NULL) { @@ -470,11 +474,14 @@ HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID - * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID (*) * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID - * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * + * (*) Value not defined in all devices. \n + * * @param pCallback pointer to the Callback function * @retval HAL status */ @@ -510,17 +517,21 @@ HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_Call hrtc->WakeUpTimerEventCallback = pCallback; break; +#if defined(RTC_TAMPER1_SUPPORT) case HAL_RTC_TAMPER1_EVENT_CB_ID : hrtc->Tamper1EventCallback = pCallback; break; +#endif case HAL_RTC_TAMPER2_EVENT_CB_ID : hrtc->Tamper2EventCallback = pCallback; break; +#if defined(RTC_TAMPER3_SUPPORT) case HAL_RTC_TAMPER3_EVENT_CB_ID : hrtc->Tamper3EventCallback = pCallback; break; +#endif case HAL_RTC_MSPINIT_CB_ID : hrtc->MspInitCallback = pCallback; @@ -576,11 +587,14 @@ HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_Call * @arg @ref HAL_RTC_ALARM_B_EVENT_CB_ID Alarm B Event Callback ID * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID TimeStamp Event Callback ID * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID WakeUp Timer Event Callback ID - * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID (*) * @arg @ref HAL_RTC_TAMPER2_EVENT_CB_ID Tamper 2 Callback ID - * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID - * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID - * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * @arg @ref HAL_RTC_TAMPER3_EVENT_CB_ID Tamper 3 Callback ID (*) + * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID + * + * (*) Value not defined in all devices. \n + * * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) @@ -610,17 +624,21 @@ HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_Ca hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ break; +#if defined(RTC_TAMPER1_SUPPORT) case HAL_RTC_TAMPER1_EVENT_CB_ID : hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ break; +#endif case HAL_RTC_TAMPER2_EVENT_CB_ID : hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */ break; +#if defined(RTC_TAMPER3_SUPPORT) case HAL_RTC_TAMPER3_EVENT_CB_ID : hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */ break; +#endif case HAL_RTC_MSPINIT_CB_ID : hrtc->MspInitCallback = HAL_RTC_MspInit; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c index c4e09e3..4cff171 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c @@ -479,8 +479,8 @@ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef uint32_t tmpreg; /* Check the parameters */ - assert_param( IS_RTC_TAMPER(sTamper->Tamper)); - assert_param( IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai.c index 650cf09..a8993e1 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai.c @@ -218,13 +218,15 @@ * @{ */ +#ifdef HAL_SAI_MODULE_ENABLED + +#if defined (SAI1) + /** @defgroup SAI SAI * @brief SAI HAL module driver * @{ */ -#ifdef HAL_SAI_MODULE_ENABLED - /* Private typedef -----------------------------------------------------------*/ /** @defgroup SAI_Private_Typedefs SAI Private Typedefs * @{ @@ -367,7 +369,6 @@ HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protoco */ HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) { - uint32_t tmpregisterGCR; uint32_t ckstr_bits; uint32_t syncen_bits; @@ -461,22 +462,6 @@ HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) /* SAI Block Synchro Configuration -----------------------------------------*/ /* This setting must be done with both audio block (A & B) disabled */ - switch (hsai->Init.SynchroExt) - { - case SAI_SYNCEXT_DISABLE : - tmpregisterGCR = 0; - break; - case SAI_SYNCEXT_OUTBLOCKA_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_0; - break; - case SAI_SYNCEXT_OUTBLOCKB_ENABLE : - tmpregisterGCR = SAI_GCR_SYNCOUT_1; - break; - default : - tmpregisterGCR = 0; - break; - } - switch (hsai->Init.Synchro) { case SAI_ASYNCHRONOUS : @@ -485,19 +470,12 @@ HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) case SAI_SYNCHRONOUS : syncen_bits = SAI_xCR1_SYNCEN_0; break; - case SAI_SYNCHRONOUS_EXT_SAI1 : - syncen_bits = SAI_xCR1_SYNCEN_1; - break; - case SAI_SYNCHRONOUS_EXT_SAI2 : - syncen_bits = SAI_xCR1_SYNCEN_1; - tmpregisterGCR |= SAI_GCR_SYNCIN_0; - break; default : syncen_bits = 0; break; } - SAI1->GCR = tmpregisterGCR; + SAI1->GCR = 0; if (hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV) { @@ -515,8 +493,26 @@ HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) if (hsai->Init.NoDivider == SAI_MASTERDIVIDER_DISABLE) { /* NODIV = 1 */ + uint32_t tmpframelength; + + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + /* For SPDIF protocol, frame length is set by hardware to 64 */ + tmpframelength = 64U; + } + else if (hsai->Init.Protocol == SAI_AC97_PROTOCOL) + { + /* For AC97 protocol, frame length is set by hardware to 256 */ + tmpframelength = 256U; + } + else + { + /* For free protocol, frame length is set by user */ + tmpframelength = hsai->FrameInit.FrameLength; + } + /* (freq x 10) to keep Significant digits */ - tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * hsai->FrameInit.FrameLength); + tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * tmpframelength); } else { @@ -533,6 +529,12 @@ HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) { hsai->Init.Mckdiv += 1U; } + + /* For SPDIF protocol, SAI shall provide a bit clock twice faster the symbol-rate */ + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + hsai->Init.Mckdiv = hsai->Init.Mckdiv >> 1; + } } /* Check the SAI Block master clock divider parameter */ assert_param(IS_SAI_BLOCK_MASTER_DIVIDER(hsai->Init.Mckdiv)); @@ -1345,29 +1347,17 @@ HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai) /* Abort the SAI Tx DMA Stream */ if ((hsai->State == HAL_SAI_STATE_BUSY_TX) && (hsai->hdmatx != NULL)) { - if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) - { - /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } + /* No need to check the returned value of HAL_DMA_Abort. */ + /* Only HAL_DMA_ERROR_NO_XFER can be returned in case of error and it's not an error for SAI. */ + (void) HAL_DMA_Abort(hsai->hdmatx); } /* Abort the SAI Rx DMA Stream */ if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) { - if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) - { - /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } + /* No need to check the returned value of HAL_DMA_Abort. */ + /* Only HAL_DMA_ERROR_NO_XFER can be returned in case of error and it's not an error for SAI. */ + (void) HAL_DMA_Abort(hsai->hdmarx); } /* Disable SAI peripheral */ @@ -1410,29 +1400,17 @@ HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai) /* Abort the SAI Tx DMA Stream */ if ((hsai->State == HAL_SAI_STATE_BUSY_TX) && (hsai->hdmatx != NULL)) { - if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) - { - /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } + /* No need to check the returned value of HAL_DMA_Abort. */ + /* Only HAL_DMA_ERROR_NO_XFER can be returned in case of error and it's not an error for SAI. */ + (void) HAL_DMA_Abort(hsai->hdmatx); } /* Abort the SAI Rx DMA Stream */ if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) { - if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) - { - /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ - if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) - { - status = HAL_ERROR; - hsai->ErrorCode |= HAL_SAI_ERROR_DMA; - } - } + /* No need to check the returned value of HAL_DMA_Abort. */ + /* Only HAL_DMA_ERROR_NO_XFER can be returned in case of error and it's not an error for SAI. */ + (void) HAL_DMA_Abort(hsai->hdmarx); } } @@ -1591,6 +1569,12 @@ HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, u return HAL_ERROR; } + /* Enable the interrupts for error handling */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + /* Enable SAI Rx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + /* Check if the SAI is already enabled */ if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) { @@ -1598,12 +1582,6 @@ HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, u __HAL_SAI_ENABLE(hsai); } - /* Enable the interrupts for error handling */ - __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); - - /* Enable SAI Rx DMA Request */ - hsai->Instance->CR1 |= SAI_xCR1_DMAEN; - /* Process Unlocked */ __HAL_UNLOCK(hsai); @@ -1746,6 +1724,9 @@ void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) /* SAI AFSDET interrupt occurred ----------------------------------*/ else if (((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET)) { + /* Clear the SAI AFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_AFSDET); + /* Change the SAI error code */ hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET; @@ -1809,6 +1790,9 @@ void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) /* SAI LFSDET interrupt occurred ----------------------------------*/ else if (((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET)) { + /* Clear the SAI LFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_LFSDET); + /* Change the SAI error code */ hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET; @@ -1872,6 +1856,9 @@ void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) /* SAI WCKCFG interrupt occurred ----------------------------------*/ else if (((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG)) { + /* Clear the SAI WCKCFG flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_WCKCFG); + /* Change the SAI error code */ hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG; @@ -2132,20 +2119,16 @@ static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, return HAL_ERROR; } - switch (protocol) + if (protocol == SAI_I2S_STANDARD) { - case SAI_I2S_STANDARD : - hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; - hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; - break; - case SAI_I2S_MSBJUSTIFIED : - case SAI_I2S_LSBJUSTIFIED : - hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; - hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT; - break; - default : - status = HAL_ERROR; - break; + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; + hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; + } + else + { + /* SAI_I2S_MSBJUSTIFIED or SAI_I2S_LSBJUSTIFIED */ + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; + hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT; } /* Frame definition */ @@ -2227,17 +2210,14 @@ static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, hsai->SlotInit.SlotNumber = nbslot; hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; - switch (protocol) + if (protocol == SAI_PCM_SHORT) { - case SAI_PCM_SHORT : - hsai->FrameInit.ActiveFrameLength = 1; - break; - case SAI_PCM_LONG : - hsai->FrameInit.ActiveFrameLength = 13; - break; - default : - status = HAL_ERROR; - break; + hsai->FrameInit.ActiveFrameLength = 1; + } + else + { + /* SAI_PCM_LONG */ + hsai->FrameInit.ActiveFrameLength = 13; } switch (datasize) @@ -2752,11 +2732,13 @@ static void SAI_DMAAbort(DMA_HandleTypeDef *hdma) * @} */ -#endif /* HAL_SAI_MODULE_ENABLED */ /** * @} */ +#endif /* SAI1 */ + +#endif /* HAL_SAI_MODULE_ENABLED */ /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai_ex.c index 058de97..8fab816 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_sai_ex.c @@ -29,6 +29,8 @@ */ #ifdef HAL_SAI_MODULE_ENABLED +#if defined (SAI1) + /** @defgroup SAIEx SAIEx * @brief SAI Extended HAL module driver * @{ @@ -123,6 +125,8 @@ HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(SAI_HandleTypeDef *hsai, SAIEx_Pdm * @} */ +#endif /* SAI1 */ + #endif /* HAL_SAI_MODULE_ENABLED */ /** * @} diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c index ddbf3e7..6f38d0c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c @@ -107,8 +107,8 @@ allows the user to configure dynamically the driver callbacks. [..] - Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback. - Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: (+) TxCpltCallback : Tx Complete Callback. (+) RxCpltCallback : Rx Complete Callback. (+) ErrorCallback : Error Callback. @@ -123,9 +123,9 @@ and a pointer to the user callback function. [..] - Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default weak (surcharged) function. - @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: (+) TxCpltCallback : Tx Complete Callback. @@ -140,13 +140,13 @@ (+) MspDeInitCallback : SMARTCARD MspDeInit. [..] - By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: - examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback(). + examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback(). Exception done for MspInit and MspDeInit functions that are respectively - reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init() - and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). - If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit() + reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init() + and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand). [..] @@ -155,8 +155,8 @@ in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. In that case first register the MspInit/MspDeInit user callbacks - using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit() - or @ref HAL_SMARTCARD_Init() function. + using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit() + or HAL_SMARTCARD_Init() function. [..] When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or @@ -722,59 +722,59 @@ HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsma (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. [..] - (+) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. + (#) There are two modes of transfer: + (##) Blocking mode: The communication is performed in polling mode. The HAL status of all data processing is returned by the same function after finishing transfer. - (++) Non-Blocking mode: The communication is performed using Interrupts + (##) Non-Blocking mode: The communication is performed using Interrupts or DMA, the relevant API's return the HAL status. The end of the data processing will be indicated through the dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. - (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks will be executed respectively at the end of the Transmit or Receive process The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected. - (+) Blocking mode APIs are : - (++) HAL_SMARTCARD_Transmit() - (++) HAL_SMARTCARD_Receive() + (#) Blocking mode APIs are : + (##) HAL_SMARTCARD_Transmit() + (##) HAL_SMARTCARD_Receive() - (+) Non Blocking mode APIs with Interrupt are : - (++) HAL_SMARTCARD_Transmit_IT() - (++) HAL_SMARTCARD_Receive_IT() - (++) HAL_SMARTCARD_IRQHandler() + (#) Non Blocking mode APIs with Interrupt are : + (##) HAL_SMARTCARD_Transmit_IT() + (##) HAL_SMARTCARD_Receive_IT() + (##) HAL_SMARTCARD_IRQHandler() - (+) Non Blocking mode functions with DMA are : - (++) HAL_SMARTCARD_Transmit_DMA() - (++) HAL_SMARTCARD_Receive_DMA() + (#) Non Blocking mode functions with DMA are : + (##) HAL_SMARTCARD_Transmit_DMA() + (##) HAL_SMARTCARD_Receive_DMA() - (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: - (++) HAL_SMARTCARD_TxCpltCallback() - (++) HAL_SMARTCARD_RxCpltCallback() - (++) HAL_SMARTCARD_ErrorCallback() + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (##) HAL_SMARTCARD_TxCpltCallback() + (##) HAL_SMARTCARD_RxCpltCallback() + (##) HAL_SMARTCARD_ErrorCallback() (#) Non-Blocking mode transfers could be aborted using Abort API's : - (+) HAL_SMARTCARD_Abort() - (+) HAL_SMARTCARD_AbortTransmit() - (+) HAL_SMARTCARD_AbortReceive() - (+) HAL_SMARTCARD_Abort_IT() - (+) HAL_SMARTCARD_AbortTransmit_IT() - (+) HAL_SMARTCARD_AbortReceive_IT() + (##) HAL_SMARTCARD_Abort() + (##) HAL_SMARTCARD_AbortTransmit() + (##) HAL_SMARTCARD_AbortReceive() + (##) HAL_SMARTCARD_Abort_IT() + (##) HAL_SMARTCARD_AbortTransmit_IT() + (##) HAL_SMARTCARD_AbortReceive_IT() (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided: - (+) HAL_SMARTCARD_AbortCpltCallback() - (+) HAL_SMARTCARD_AbortTransmitCpltCallback() - (+) HAL_SMARTCARD_AbortReceiveCpltCallback() + (##) HAL_SMARTCARD_AbortCpltCallback() + (##) HAL_SMARTCARD_AbortTransmitCpltCallback() + (##) HAL_SMARTCARD_AbortReceiveCpltCallback() (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. Errors are handled as follows : - (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. If user wants to abort it, Abort services should be called by user. - (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted. This concerns Frame Error in Interrupt mode tranmission, Overrun Error in Interrupt mode reception and all errors in DMA mode. Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed. @@ -917,7 +917,7 @@ HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uin return HAL_TIMEOUT; } *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); - *ptmpdata++; + ptmpdata++; } /* At end of Rx process, restore hsmartcard->RxState to Ready */ @@ -2287,6 +2287,7 @@ static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard SMARTCARD_ClockSourceTypeDef clocksource; HAL_StatusTypeDef ret = HAL_OK; const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + uint32_t pclk; /* Check the parameters */ assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); @@ -2341,7 +2342,7 @@ static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard /*-------------------------- USART GTPR Configuration ----------------------*/ tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); - MODIFY_REG(hsmartcard->Instance->GTPR, (USART_GTPR_GT | USART_GTPR_PSC), tmpreg); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); /*-------------------------- USART RTOR Configuration ----------------------*/ tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); @@ -2358,13 +2359,15 @@ static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard switch (clocksource) { case SMARTCARD_CLOCKSOURCE_PCLK2: - tmpreg = (uint16_t)(((HAL_RCC_GetPCLK2Freq() / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + pclk = HAL_RCC_GetPCLK2Freq(); + tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); break; case SMARTCARD_CLOCKSOURCE_HSI: tmpreg = (uint16_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); break; case SMARTCARD_CLOCKSOURCE_SYSCLK: - tmpreg = (uint16_t)(((HAL_RCC_GetSysClockFreq() / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + pclk = HAL_RCC_GetSysClockFreq(); + tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); break; case SMARTCARD_CLOCKSOURCE_LSE: tmpreg = (uint16_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c index 24197ba..1011413 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c @@ -65,16 +65,16 @@ Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. Function HAL_SPI_RegisterCallback() allows to register following callbacks: - (+) TxCpltCallback : SPI Tx Completed callback - (+) RxCpltCallback : SPI Rx Completed callback - (+) TxRxCpltCallback : SPI TxRx Completed callback - (+) TxHalfCpltCallback : SPI Tx Half Completed callback - (+) RxHalfCpltCallback : SPI Rx Half Completed callback - (+) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (+) ErrorCallback : SPI Error callback - (+) AbortCpltCallback : SPI Abort callback - (+) MspInitCallback : SPI Msp Init callback - (+) MspDeInitCallback : SPI Msp DeInit callback + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. @@ -84,17 +84,18 @@ HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, and the Callback ID. This function allows to reset following callbacks: - (+) TxCpltCallback : SPI Tx Completed callback - (+) RxCpltCallback : SPI Rx Completed callback - (+) TxRxCpltCallback : SPI TxRx Completed callback - (+) TxHalfCpltCallback : SPI Tx Half Completed callback - (+) RxHalfCpltCallback : SPI Rx Half Completed callback - (+) TxRxHalfCpltCallback : SPI TxRx Half Completed callback - (+) ErrorCallback : SPI Error callback - (+) AbortCpltCallback : SPI Abort callback - (+) MspInitCallback : SPI Msp Init callback - (+) MspDeInitCallback : SPI Msp DeInit callback - + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET all callbacks are set to the corresponding weak functions: examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). @@ -104,6 +105,7 @@ If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. Exception done MspInit/MspDeInit functions that can be registered/unregistered in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, @@ -112,7 +114,8 @@ using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() or HAL_SPI_Init() function. - When The compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available and weak (surcharged) callbacks are used. @@ -269,8 +272,8 @@ static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_ */ /** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * + * @brief Initialization and Configuration functions + * @verbatim =============================================================================== ##### Initialization and de-initialization functions ##### @@ -535,7 +538,8 @@ __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -745,8 +749,8 @@ HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_Ca */ /** @defgroup SPI_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * + * @brief Data transfers functions + * @verbatim ============================================================================== ##### IO operation functions ##### @@ -1872,7 +1876,8 @@ HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, } /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount)) + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) { /* Update SPI error code */ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); @@ -2014,7 +2019,8 @@ HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, u hspi->hdmarx->XferAbortCallback = NULL; /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount)) + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) { /* Update SPI error code */ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); @@ -2181,7 +2187,8 @@ HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t * hspi->hdmarx->XferAbortCallback = NULL; /* Enable the Rx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount)) + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) { /* Update SPI error code */ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); @@ -2202,7 +2209,8 @@ HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t * hspi->hdmatx->XferAbortCallback = NULL; /* Enable the Tx DMA Stream/Channel */ - if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount)) + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) { /* Update SPI error code */ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); @@ -2242,11 +2250,12 @@ error : * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) { HAL_StatusTypeDef errorcode; - __IO uint32_t count, resetcount; + __IO uint32_t count; + __IO uint32_t resetcount; /* Initialized local variable */ errorcode = HAL_OK; @@ -2269,8 +2278,7 @@ HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) break; } count--; - } - while (hspi->State != HAL_SPI_STATE_ABORT); + } while (hspi->State != HAL_SPI_STATE_ABORT); /* Reset Timeout Counter */ count = resetcount; } @@ -2287,8 +2295,7 @@ HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) break; } count--; - } - while (hspi->State != HAL_SPI_STATE_ABORT); + } while (hspi->State != HAL_SPI_STATE_ABORT); /* Reset Timeout Counter */ count = resetcount; } @@ -2403,12 +2410,13 @@ HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) { HAL_StatusTypeDef errorcode; uint32_t abortcplt ; - __IO uint32_t count, resetcount; + __IO uint32_t count; + __IO uint32_t resetcount; /* Initialized local variable */ errorcode = HAL_OK; @@ -2432,8 +2440,7 @@ HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) break; } count--; - } - while (hspi->State != HAL_SPI_STATE_ABORT); + } while (hspi->State != HAL_SPI_STATE_ABORT); /* Reset Timeout Counter */ count = resetcount; } @@ -2450,8 +2457,7 @@ HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) break; } count--; - } - while (hspi->State != HAL_SPI_STATE_ABORT); + } while (hspi->State != HAL_SPI_STATE_ABORT); /* Reset Timeout Counter */ count = resetcount; } @@ -2667,7 +2673,8 @@ void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) } /* SPI in Error Treatment --------------------------------------------------*/ - if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) { /* SPI Overrun error interrupt occurred ----------------------------------*/ if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) @@ -4164,8 +4171,7 @@ static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) break; } count--; - } - while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); /* Control the BSY flag */ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) @@ -4206,8 +4212,7 @@ static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) break; } count--; - } - while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) { @@ -4238,8 +4243,7 @@ static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) break; } count--; - } - while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); /* Control the BSY flag */ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c index 656a1d1..3116b78 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c @@ -498,11 +498,11 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat /* Check the parameters */ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -950,11 +950,11 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -1529,11 +1529,11 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -2077,11 +2077,11 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((pData == NULL) && (Length > 0U)) { @@ -2625,15 +2625,15 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_Ini } /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); @@ -2791,7 +2791,7 @@ __weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Enable the encoder interface channels */ switch (Channel) @@ -2835,7 +2835,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -2881,7 +2881,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Enable the encoder interface channels */ /* Enable the capture compare Interrupts 1 and/or 2 */ @@ -2931,7 +2931,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -2986,13 +2986,13 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch uint32_t *pData2, uint16_t Length) { /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) { @@ -3120,7 +3120,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) { /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); /* Disable the Input Capture channels 1 and 2 (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ @@ -3755,6 +3755,10 @@ HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, @@ -3911,11 +3915,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((BurstBuffer == NULL) && (BurstLength > 0U)) { @@ -4182,11 +4186,11 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if ((BurstBuffer == NULL) && (BurstLength > 0U)) { diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c index f3bee11..503cb0c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c @@ -409,11 +409,11 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 /* Check the parameters */ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if (((uint32_t)pData == 0U) && (Length > 0U)) { @@ -721,11 +721,11 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if (((uint32_t)pData == 0U) && (Length > 0U)) { @@ -1129,11 +1129,11 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - if ((htim->State == HAL_TIM_STATE_BUSY)) + if (htim->State == HAL_TIM_STATE_BUSY) { return HAL_BUSY; } - else if ((htim->State == HAL_TIM_STATE_READY)) + else if (htim->State == HAL_TIM_STATE_READY) { if (((uint32_t)pData == 0U) && (Length > 0U)) { @@ -1647,7 +1647,7 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, uint32_t tmpsmcr; /* Check the parameters */ - assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance)); + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); @@ -1680,16 +1680,19 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, /* Select the TRGO source */ tmpcr2 |= sMasterConfig->MasterOutputTrigger; - /* Reset the MSM Bit */ - tmpsmcr &= ~TIM_SMCR_MSM; - /* Set master mode */ - tmpsmcr |= sMasterConfig->MasterSlaveMode; - /* Update TIMx CR2 */ htim->Instance->CR2 = tmpcr2; - /* Update TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } /* Change the htim state */ htim->State = HAL_TIM_STATE_READY; @@ -1705,6 +1708,9 @@ HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, * @param htim TIM handle * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, @@ -1777,10 +1783,10 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, { uint32_t tmporx; - uint32_t bkin_enable_mask = 0U; - uint32_t bkin_polarity_mask = 0U; - uint32_t bkin_enable_bitpos = 0U; - uint32_t bkin_polarity_bitpos = 0U; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; /* Check the parameters */ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); @@ -1797,10 +1803,12 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, case TIM_BREAKINPUTSOURCE_BKIN: { bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; bkin_polarity_mask = TIM1_AF1_BKINP; bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; break; } +#if defined(COMP1) && defined(COMP2) case TIM_BREAKINPUTSOURCE_COMP1: { bkin_enable_mask = TIM1_AF1_BKCMP1E; @@ -1817,9 +1825,16 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; break; } +#endif /* COMP1 && COMP2 */ default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; break; + } } switch (BreakInput) @@ -1878,29 +1893,29 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 - * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output - * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output (*) + * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output (*) * field2 can have the following values: * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to I/O - * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output (*) * * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3): * * field1 can have the following values: * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1 - * @arg TIM_TIM2_ITR1_USB: TIM2_ITR1 is connected to USB SOF + * @arg TIM_TIM2_ITR1_USB: TIM2_ITR1 is connected to USB SOF (*) * * field2 can have the following values: * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to I/O * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE - * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output - * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output (*) + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output (*) * * field3 can have the following values: * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to I/O - * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output - * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output - * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output (*) + * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output (*) + * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output (*) * * For TIM16, the parameter can have the following values: * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to I/O @@ -1910,10 +1925,12 @@ HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, * * For TIM17, the parameter can have the following values: * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to I/O - * @arg TIM_TIM17_TI1_MSI: TIM17 TI1 is connected to MSI (contraints: MSI clock < 1/4 TIM APB clock) + * @arg TIM_TIM17_TI1_MSI: TIM17 TI1 is connected to MSI (constraint: MSI clock < 1/4 TIM APB clock) * @arg TIM_TIM17_TI1_HSE: TIM17 TI1 is connected to HSE div 32 * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO * + * (*) Value not defined in all devices. + * * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c index 5a69a6e..9abed26 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c @@ -193,6 +193,7 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_hal.h" +#if defined(TSC) /** @addtogroup STM32WBxx_HAL_Driver * @{ */ @@ -1117,4 +1118,5 @@ static uint32_t TSC_extract_groups(uint32_t iomask) * @} */ +#endif /* TSC */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c index b7a2174..64323f9 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c @@ -179,8 +179,10 @@ #define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT| \ USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ +#if defined(LPUART1) #define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ #define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ +#endif #define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ #define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ @@ -308,7 +310,11 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) else { /* Check the parameters */ +#if defined(LPUART1) assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); +#else + assert_param(IS_UART_INSTANCE(huart->Instance)); +#endif } if (huart->gState == HAL_UART_STATE_RESET) @@ -334,7 +340,6 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_BUSY; - /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ @@ -354,7 +359,6 @@ HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - /* Enable the Peripheral */ __HAL_UART_ENABLE(huart); /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ @@ -401,7 +405,6 @@ HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_BUSY; - /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ @@ -424,7 +427,6 @@ HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); - /* Enable the Peripheral */ __HAL_UART_ENABLE(huart); /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ @@ -489,7 +491,6 @@ HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLe huart->gState = HAL_UART_STATE_BUSY; - /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ @@ -515,7 +516,6 @@ HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLe /* Set the USART LIN Break detection length. */ MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); - /* Enable the Peripheral */ __HAL_UART_ENABLE(huart); /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ @@ -575,7 +575,6 @@ HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Add huart->gState = HAL_UART_STATE_BUSY; - /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); /* Set the UART Communication parameters */ @@ -604,7 +603,6 @@ HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Add /* Set the wake up method by setting the WAKE bit in the CR1 register */ MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); - /* Enable the Peripheral */ __HAL_UART_ENABLE(huart); /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ @@ -626,11 +624,14 @@ HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) } /* Check the parameters */ +#if defined(LPUART1) assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); +#else + assert_param(IS_UART_INSTANCE(huart->Instance)); +#endif huart->gState = HAL_UART_STATE_BUSY; - /* Disable the Peripheral */ __HAL_UART_DISABLE(huart); huart->Instance->CR1 = 0x0U; @@ -653,7 +654,6 @@ HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_RESET; huart->RxState = HAL_UART_STATE_RESET; - /* Process Unlock */ __HAL_UNLOCK(huart); return HAL_OK; @@ -712,18 +712,18 @@ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if (pCallback == NULL) { - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; return HAL_ERROR; } - /* Process locked */ + __HAL_LOCK(huart); if (huart->gState == HAL_UART_STATE_READY) @@ -783,10 +783,8 @@ HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_ break; default : - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; break; } @@ -804,24 +802,19 @@ HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_ break; default : - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; break; } } else { - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; } - /* Release Lock */ __HAL_UNLOCK(huart); return status; @@ -852,7 +845,6 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR { HAL_StatusTypeDef status = HAL_OK; - /* Process locked */ __HAL_LOCK(huart); if (HAL_UART_STATE_READY == huart->gState) @@ -912,10 +904,8 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR break; default : - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; break; } @@ -933,24 +923,19 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR break; default : - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; break; } } else { - /* Update the error code */ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; - /* Return error status */ status = HAL_ERROR; } - /* Release Lock */ __HAL_UNLOCK(huart); return status; @@ -1040,13 +1025,16 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR /** * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. * @note When FIFO mode is enabled, writing a data in the TDR register adds one * data to the TXFIFO. Write operations to the TDR register are performed * when TXFNF flag is set. From hardware perspective, TXFNF flag and * TXE are mapped on the same bit-field. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @param Timeout Timeout duration. * @retval HAL status */ @@ -1064,7 +1052,6 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; @@ -1076,7 +1063,7 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u huart->TxXferSize = Size; huart->TxXferCount = Size; - /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) { pdata8bits = NULL; @@ -1088,6 +1075,8 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u pdata16bits = NULL; } + __HAL_UNLOCK(huart); + while (huart->TxXferCount > 0U) { if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) @@ -1115,9 +1104,6 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u /* At end of Tx process, restore huart->gState to Ready */ huart->gState = HAL_UART_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(huart); - return HAL_OK; } else @@ -1128,13 +1114,16 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u /** * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO * is not empty. Read operations from the RDR register are performed when * RXFNE flag is set. From hardware perspective, RXFNE flag and * RXNE are mapped on the same bit-field. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @param Timeout Timeout duration. * @retval HAL status */ @@ -1153,7 +1142,6 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->ErrorCode = HAL_UART_ERROR_NONE; @@ -1181,6 +1169,8 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui pdata16bits = NULL; } + __HAL_UNLOCK(huart); + /* as long as data have to be received */ while (huart->RxXferCount > 0U) { @@ -1204,9 +1194,6 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; - /* Process Unlocked */ - __HAL_UNLOCK(huart); - return HAL_OK; } else @@ -1217,9 +1204,12 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui /** * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) @@ -1232,7 +1222,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->pTxBuffPtr = pData; @@ -1256,7 +1245,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData huart->TxISR = UART_TxISR_8BIT_FIFOEN; } - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the TX FIFO threshold interrupt */ @@ -1274,7 +1262,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData huart->TxISR = UART_TxISR_8BIT; } - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the Transmit Data Register Empty interrupt */ @@ -1291,9 +1278,12 @@ HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData /** * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) @@ -1306,7 +1296,6 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->pRxBuffPtr = pData; @@ -1336,7 +1325,6 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, huart->RxISR = UART_RxISR_8BIT_FIFOEN; } - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ @@ -1355,7 +1343,6 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, huart->RxISR = UART_RxISR_8BIT; } - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ @@ -1372,9 +1359,12 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, /** * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) @@ -1387,7 +1377,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->pTxBuffPtr = pData; @@ -1417,7 +1406,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat /* Set error code to DMA */ huart->ErrorCode = HAL_UART_ERROR_DMA; - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Restore huart->gState to ready */ @@ -1429,7 +1417,6 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat /* Clear the TC flag in the ICR register */ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the DMA transfer for transmit request by setting the DMAT bit @@ -1448,9 +1435,12 @@ HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pDat * @brief Receive an amount of data in DMA mode. * @note When the UART parity is enabled (PCE = 1), the received data contain * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. * @param huart UART handle. - * @param pData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) @@ -1463,7 +1453,6 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData return HAL_ERROR; } - /* Process Locked */ __HAL_LOCK(huart); huart->pRxBuffPtr = pData; @@ -1492,7 +1481,6 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData /* Set error code to DMA */ huart->ErrorCode = HAL_UART_ERROR_DMA; - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Restore huart->gState to ready */ @@ -1501,7 +1489,6 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData return HAL_ERROR; } } - /* Process Unlocked */ __HAL_UNLOCK(huart); /* Enable the UART Parity Error Interrupt */ @@ -1532,7 +1519,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) const HAL_UART_StateTypeDef gstate = huart->gState; const HAL_UART_StateTypeDef rxstate = huart->RxState; - /* Process Locked */ __HAL_LOCK(huart); if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && @@ -1552,7 +1538,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); } - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -1565,7 +1550,6 @@ HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) { - /* Process Locked */ __HAL_LOCK(huart); if (huart->gState == HAL_UART_STATE_BUSY_TX) @@ -1586,7 +1570,6 @@ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); } - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -1671,7 +1654,7 @@ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) { /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ @@ -1748,7 +1731,6 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; - /* Reset Handle ErrorCode to No Error */ huart->ErrorCode = HAL_UART_ERROR_NONE; return HAL_OK; @@ -1765,7 +1747,7 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) { /* Disable TCIE, TXEIE and TXFTIE interrupts */ @@ -1823,7 +1805,7 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) * - Set handle State to READY * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) { /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ @@ -1883,7 +1865,7 @@ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) { uint32_t abortcplt = 1U; @@ -2027,7 +2009,7 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) { /* Disable interrupts */ @@ -2117,7 +2099,7 @@ HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be * considered as completed only when user abort complete callback is executed (not when exiting function). * @retval HAL status -*/ + */ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) { /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ @@ -2212,7 +2194,7 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) uint32_t errorcode; /* If no error occurs */ - errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); if (errorflags == 0U) { /* UART in mode Receiver ---------------------------------------------------*/ @@ -2231,7 +2213,7 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) /* If some errors occur */ if ((errorflags != 0U) && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) - || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U)))) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) { /* UART parity error interrupt occurred -------------------------------------*/ if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) @@ -2267,10 +2249,18 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) huart->ErrorCode |= HAL_UART_ERROR_ORE; } - /* Call UART Error Call back function if need be --------------------------*/ + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ if (huart->ErrorCode != HAL_UART_ERROR_NONE) { - /* UART in mode Receiver ---------------------------------------------------*/ + /* UART in mode Receiver --------------------------------------------------*/ if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || ((cr3its & USART_CR3_RXFTIE) != 0U))) @@ -2281,11 +2271,14 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) } } - /* If Overrun error occurs, or if any error occurs in DMA mode reception, - consider error as blocking */ + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ errorcode = huart->ErrorCode; if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || - ((errorcode & HAL_UART_ERROR_ORE) != 0U)) + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) { /* Blocking error : transfer is aborted Set the UART state ready to be able to start again the process, @@ -2551,6 +2544,9 @@ __weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) =============================================================================== [..] This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode @@ -2564,6 +2560,99 @@ __weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) * @{ */ +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + /** * @brief Enable UART in mute mode (does not mean UART enters mute mode; * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). @@ -2572,7 +2661,6 @@ __weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) { - /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; @@ -2593,7 +2681,6 @@ HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) { - /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; @@ -2624,7 +2711,6 @@ void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) { - /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; @@ -2636,7 +2722,6 @@ HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -2649,7 +2734,6 @@ HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) { - /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; @@ -2661,7 +2745,6 @@ HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -2678,7 +2761,6 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) /* Check the parameters */ assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - /* Process Locked */ __HAL_LOCK(huart); huart->gState = HAL_UART_STATE_BUSY; @@ -2688,7 +2770,6 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -2699,8 +2780,8 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) */ /** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions - * @brief UART Peripheral State functions - * + * @brief UART Peripheral State functions + * @verbatim ============================================================================== ##### Peripheral State and Error functions ##### @@ -2722,7 +2803,8 @@ HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) */ HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) { - uint32_t temp1, temp2; + uint32_t temp1; + uint32_t temp2; temp1 = huart->gState; temp2 = huart->RxState; @@ -2734,7 +2816,7 @@ HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) * @param huart Pointer to a UART_HandleTypeDef structure that contains * the configuration information for the specified UART. * @retval UART Error Code -*/ + */ uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) { return huart->ErrorCode; @@ -2787,11 +2869,15 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) UART_ClockSourceTypeDef clocksource; uint32_t usartdiv = 0x00000000U; HAL_StatusTypeDef ret = HAL_OK; +#if defined(LPUART1) uint32_t lpuart_ker_ck_pres = 0x00000000U; +#endif + uint32_t pclk; /* Check the parameters */ assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); +#if defined(LPUART1) if (UART_INSTANCE_LOWPOWER(huart)) { assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); @@ -2801,6 +2887,10 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); } +#else + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); +#endif assert_param(IS_UART_PARITY(huart->Init.Parity)); assert_param(IS_UART_MODE(huart->Init.Mode)); @@ -2832,10 +2922,14 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) * to huart->Init.OneBitSampling (not applicable to LPUART) */ tmpreg = (uint32_t)huart->Init.HwFlowCtl; +#if defined(LPUART1) if (!(UART_INSTANCE_LOWPOWER(huart))) { tmpreg |= huart->Init.OneBitSampling; } +#else + tmpreg |= huart->Init.OneBitSampling; +#endif MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); /*-------------------------- USART PRESC Configuration -----------------------*/ @@ -2846,6 +2940,7 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) /*-------------------------- USART BRR Configuration -----------------------*/ UART_GETCLOCKSOURCE(huart, clocksource); +#if defined(LPUART1) /* Check LPUART instance */ if (UART_INSTANCE_LOWPOWER(huart)) { @@ -2883,13 +2978,15 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) switch (clocksource) { case UART_CLOCKSOURCE_PCLK1: - usartdiv = (uint32_t)(UART_DIV_LPUART(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetPCLK1Freq(); + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_HSI: usartdiv = (uint32_t)(UART_DIV_LPUART(HSI_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint32_t)(UART_DIV_LPUART(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_LSE: usartdiv = (uint32_t)(UART_DIV_LPUART(LSE_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); @@ -2913,20 +3010,25 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) } /* Check UART Over Sampling to set Baud Rate Register */ else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) +#else + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) +#endif /* LPUART1 */ { switch (clocksource) { case UART_CLOCKSOURCE_PCLK2: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetPCLK2Freq(); + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_HSI: usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HSI_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint16_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_LSE: - usartdiv = (uint16_t)(UART_DIV_SAMPLING8(LSE_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + usartdiv = (uint16_t)(UART_DIV_SAMPLING8((uint32_t)LSE_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; default: ret = HAL_ERROR; @@ -2950,16 +3052,18 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) switch (clocksource) { case UART_CLOCKSOURCE_PCLK2: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetPCLK2Freq(); + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_HSI: usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HSI_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate, huart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint16_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; case UART_CLOCKSOURCE_LSE: - usartdiv = (uint16_t)(UART_DIV_SAMPLING16(LSE_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + usartdiv = (uint16_t)(UART_DIV_SAMPLING16((uint32_t)LSE_VALUE, huart->Init.BaudRate, huart->Init.ClockPrescaler)); break; default: ret = HAL_ERROR; @@ -3087,6 +3191,7 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) return HAL_TIMEOUT; } } + /* Check if the Receiver is enabled */ if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) { @@ -3102,7 +3207,6 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_OK; @@ -3117,7 +3221,8 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) * @param Timeout Timeout duration * @retval HAL status */ -HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) { /* Wait until flag is set */ while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) @@ -3134,11 +3239,32 @@ HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; - /* Process Unlocked */ __HAL_UNLOCK(huart); return HAL_TIMEOUT; } + + if (READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } } } return HAL_OK; @@ -3570,7 +3696,7 @@ static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) else { tmp = (uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (uint16_t)(*tmp & USART_TDR_TDR_Msk); + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); huart->pTxBuffPtr += 2U; huart->TxXferCount--; } @@ -3647,7 +3773,7 @@ static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) { tmp = (uint16_t *) huart->pTxBuffPtr; - huart->Instance->TDR = (uint16_t)(*tmp & USART_TDR_TDR_Msk); + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); huart->pTxBuffPtr += 2U; huart->TxXferCount--; } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c index 9154997..1ab7a12 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c @@ -163,7 +163,8 @@ static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); * oversampling rate). * @retval HAL status */ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime) +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) { uint32_t temp; @@ -239,7 +240,6 @@ HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, return (UART_CheckIdleState(huart)); } - /** * @} */ @@ -315,7 +315,7 @@ __weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) /** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions * @brief Extended Peripheral Control functions - * + * @verbatim =============================================================================== ##### Peripheral Control functions ##### @@ -336,9 +336,6 @@ __weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) * @{ */ - - - /** * @brief By default in multiprocessor mode, when the wake up method is set * to address mark, the UART handles only 4-bit long addresses detection; @@ -378,7 +375,6 @@ HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *hua return (UART_CheckIdleState(huart)); } - /** * @brief Set Wakeup from Stop mode interrupt flag selection. * @note It is the application responsibility to enable the interrupt used as @@ -440,7 +436,6 @@ HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huar return status; } - /** * @brief Enable UART Stop Mode. * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c index 662ee4d..0bc1ac1 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c @@ -732,9 +732,12 @@ HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_ /** * @brief Simplex send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. * @param husart USART handle. - * @param pTxData Pointer to data buffer. - * @param Size Amount of data to be sent. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. * @param Timeout Timeout duration. * @retval HAL status */ @@ -826,10 +829,13 @@ HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxDa /** * @brief Receive an amount of data in blocking mode. - * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. * @param husart USART handle. - * @param pRxData Pointer to data buffer. - * @param Size Amount of data to be received. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. * @param Timeout Timeout duration. * @retval HAL status */ @@ -936,10 +942,13 @@ HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxDat /** * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. * @param husart USART handle. - * @param pTxData pointer to TX data buffer. - * @param pRxData pointer to RX data buffer. - * @param Size amount of data to be sent (same amount to be received). + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). * @param Timeout Timeout duration. * @retval HAL status */ @@ -1082,9 +1091,12 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t /** * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. * @param husart USART handle. - * @param pTxData pointer to data buffer. - * @param Size amount of data to be sent. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) @@ -1162,10 +1174,13 @@ HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pT /** * @brief Receive an amount of data in interrupt mode. - * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. * @param husart USART handle. - * @param pRxData pointer to data buffer. - * @param Size amount of data to be received. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) @@ -1264,10 +1279,13 @@ HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRx /** * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. * @param husart USART handle. - * @param pTxData pointer to TX data buffer. - * @param pRxData pointer to RX data buffer. - * @param Size amount of data to be sent (same amount to be received). + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). * @retval HAL status */ HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) @@ -1359,9 +1377,12 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint /** * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. * @param husart USART handle. - * @param pTxData pointer to data buffer. - * @param Size amount of data to be sent. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. * @retval HAL status */ HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size) @@ -1441,10 +1462,13 @@ HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *p * @brief Receive an amount of data in DMA mode. * @note When the USART parity is enabled (PCE = 1), the received data contain * the parity bit (MSB position). - * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. * @param husart USART handle. - * @param pRxData pointer to data buffer. - * @param Size amount of data to be received. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. * @retval HAL status */ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) @@ -1556,10 +1580,13 @@ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pR /** * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. * @param husart USART handle. - * @param pTxData pointer to TX data buffer. - * @param pRxData pointer to RX data buffer. - * @param Size amount of data to be received/sent. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. * @retval HAL status */ HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) @@ -2823,6 +2850,7 @@ static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) HAL_StatusTypeDef ret = HAL_OK; uint16_t brrtemp; uint32_t usartdiv = 0x00000000; + uint32_t pclk; /* Check the parameters */ assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); @@ -2869,13 +2897,15 @@ static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) switch (clocksource) { case USART_CLOCKSOURCE_PCLK2: - usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate, husart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetPCLK2Freq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); break; case USART_CLOCKSOURCE_HSI: usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HSI_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); break; case USART_CLOCKSOURCE_SYSCLK: - usartdiv = (uint32_t)(USART_DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), husart->Init.BaudRate, husart->Init.ClockPrescaler)); + pclk = HAL_RCC_GetSysClockFreq(); + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler)); break; case USART_CLOCKSOURCE_LSE: usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler)); @@ -3058,7 +3088,7 @@ static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) { husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); - *husart->pTxBuffPtr++; + husart->pTxBuffPtr++; husart->TxXferCount--; } else diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c index e97e409..457d6a9 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c @@ -54,11 +54,17 @@ #ifdef HAL_USART_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Constants USARTEx Private Constants + * @{ + */ /* UART RX FIFO depth */ #define RX_FIFO_DEPTH 8U /* UART TX FIFO depth */ #define TX_FIFO_DEPTH 8U +/** + * @} + */ /* Private define ------------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c index d055320..e70227c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c @@ -32,12 +32,11 @@ (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock (+) Typical values: - (++) Counter min (T[5;0] = 0x00) @56 MHz(PCLK1) with zero prescaler: - max timeout before reset: approximately 73.14 microseconds - (++) Counter max (T[5;0] = 0x3F) @56 MHz(PCLK1) with prescaler dividing by 128: - max timeout before reset: approximately 599.18 milliseconds + (++) Counter min (T[5;0] = 0x00) at 64 MHz (PCLK1) with zero prescaler: + max timeout before reset: approximately 64us + (++) Counter max (T[5;0] = 0x3F) at 64 MHz (PCLK1) with prescaler dividing by 128: + max timeout before reset: approximately 524.28ms - ============================================================================== ##### How to use this driver ##### ============================================================================== @@ -67,26 +66,26 @@ [..] The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. Use Functions - @ref HAL_WWDG_RegisterCallback() to register a user callback. + HAL_WWDG_RegisterCallback() to register a user callback. - (+) Function @ref HAL_WWDG_RegisterCallback() allows to register following + (+) Function HAL_WWDG_RegisterCallback() allows to register following callbacks: (++) EwiCallback : callback for Early WakeUp Interrupt. (++) MspInitCallback : WWDG MspInit. This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. - (+) Use function @ref HAL_WWDG_UnRegisterCallback() to reset a callback to - the default weak (surcharged) function. @ref HAL_WWDG_UnRegisterCallback() + (+) Use function HAL_WWDG_UnRegisterCallback() to reset a callback to + the default weak (surcharged) function. HAL_WWDG_UnRegisterCallback() takes as parameters the HAL peripheral handle and the Callback ID. This function allows to reset following callbacks: (++) EwiCallback : callback for Early WakeUp Interrupt. (++) MspInitCallback : WWDG MspInit. [..] - When calling @ref HAL_WWDG_Init function, callbacks are reset to the + When calling HAL_WWDG_Init function, callbacks are reset to the corresponding legacy weak (surcharged) functions: - @ref HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have + HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have not been registered before. [..] @@ -143,8 +142,8 @@ */ /** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions - * @brief Initialization and Configuration functions. - * + * @brief Initialization and Configuration functions. + * @verbatim ============================================================================== ##### Initialization and Configuration functions ##### @@ -183,12 +182,12 @@ HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) #if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) /* Reset Callback pointers */ - if(hwwdg->EwiCallback == NULL) + if (hwwdg->EwiCallback == NULL) { hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; } - if(hwwdg->MspInitCallback == NULL) + if (hwwdg->MspInitCallback == NULL) { hwwdg->MspInitCallback = HAL_WWDG_MspInit; } @@ -247,13 +246,13 @@ HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_ { HAL_StatusTypeDef status = HAL_OK; - if(pCallback == NULL) + if (pCallback == NULL) { status = HAL_ERROR; } else { - switch(CallbackID) + switch (CallbackID) { case HAL_WWDG_EWI_CB_ID: hwwdg->EwiCallback = pCallback; @@ -287,7 +286,7 @@ HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWD { HAL_StatusTypeDef status = HAL_OK; - switch(CallbackID) + switch (CallbackID) { case HAL_WWDG_EWI_CB_ID: hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback; @@ -311,8 +310,8 @@ HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWD */ /** @defgroup WWDG_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * + * @brief IO operation functions + * @verbatim ============================================================================== ##### IO operation functions ##### diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c index c18b129..2aa46ee 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c @@ -23,9 +23,9 @@ #include "stm32wbxx_ll_bus.h" #ifdef USE_FULL_ASSERT - #include "stm32_assert.h" +#include "stm32_assert.h" #else - #define assert_param(expr) ((void)0U) +#define assert_param(expr) ((void)0U) #endif /** @addtogroup STM32WBxx_LL_Driver @@ -282,23 +282,23 @@ ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonIni /* On this STM32 serie, setting of these features is conditioned to */ /* ADC state: */ /* All ADC instances of the ADC common group must be disabled. */ - if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) + if (__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0UL) { /* Configuration of ADC hierarchical scope: */ /* - common to several ADC */ /* (all ADC instances belonging to the same ADC common instance) */ /* - Set ADC clock (conversion clock) */ #if defined(ADC_MULTIMODE_SUPPORT) - if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) + if (ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) { MODIFY_REG(ADCxy_COMMON->CCR, - ADC_CCR_CKMODE + ADC_CCR_CKMODE | ADC_CCR_PRESC | ADC_CCR_DUAL | ADC_CCR_MDMA | ADC_CCR_DELAY - , - ADC_CommonInitStruct->CommonClock + , + ADC_CommonInitStruct->CommonClock | ADC_CommonInitStruct->Multimode | ADC_CommonInitStruct->MultiDMATransfer | ADC_CommonInitStruct->MultiTwoSamplingDelay @@ -307,13 +307,13 @@ ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonIni else { MODIFY_REG(ADCxy_COMMON->CCR, - ADC_CCR_CKMODE + ADC_CCR_CKMODE | ADC_CCR_PRESC | ADC_CCR_DUAL | ADC_CCR_MDMA | ADC_CCR_DELAY - , - ADC_CommonInitStruct->CommonClock + , + ADC_CommonInitStruct->CommonClock | LL_ADC_MULTI_INDEPENDENT ); } @@ -371,7 +371,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) assert_param(IS_ADC_ALL_INSTANCE(ADCx)); /* Disable ADC instance if not already disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 1UL) + if (LL_ADC_IsEnabled(ADCx) == 1UL) { /* Set ADC group regular trigger source to SW start to ensure to not */ /* have an external trigger event occurring during the conversion stop */ @@ -379,9 +379,9 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); /* Stop potential ADC conversion on going on ADC group regular. */ - if(LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) + if (LL_ADC_REG_IsConversionOngoing(ADCx) != 0UL) { - if(LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) + if (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 0UL) { LL_ADC_REG_StopConversion(ADCx); } @@ -393,9 +393,9 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE); /* Stop potential ADC conversion on going on ADC group injected. */ - if(LL_ADC_INJ_IsConversionOngoing(ADCx) != 0UL) + if (LL_ADC_INJ_IsConversionOngoing(ADCx) != 0UL) { - if(LL_ADC_INJ_IsStopConversionOngoing(ADCx) == 0UL) + if (LL_ADC_INJ_IsStopConversionOngoing(ADCx) == 0UL) { LL_ADC_INJ_StopConversion(ADCx); } @@ -403,11 +403,11 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Wait for ADC conversions are effectively stopped */ timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; - while (( LL_ADC_REG_IsStopConversionOngoing(ADCx) + while ((LL_ADC_REG_IsStopConversionOngoing(ADCx) | LL_ADC_INJ_IsStopConversionOngoing(ADCx)) == 1UL) { timeout_cpu_cycles--; - if(timeout_cpu_cycles == 0UL) + if (timeout_cpu_cycles == 0UL) { /* Time-out error */ status = ERROR; @@ -428,7 +428,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) while (LL_ADC_IsDisableOngoing(ADCx) == 1UL) { timeout_cpu_cycles--; - if(timeout_cpu_cycles == 0UL) + if (timeout_cpu_cycles == 0UL) { /* Time-out error */ status = ERROR; @@ -438,16 +438,16 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) } /* Check whether ADC state is compliant with expected state */ - if(READ_BIT(ADCx->CR, - ( ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART - | ADC_CR_ADDIS | ADC_CR_ADEN ) - ) - == 0UL) + if (READ_BIT(ADCx->CR, + (ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN) + ) + == 0UL) { /* ========== Reset ADC registers ========== */ /* Reset register IER */ CLEAR_BIT(ADCx->IER, - ( LL_ADC_IT_ADRDY + (LL_ADC_IT_ADRDY | LL_ADC_IT_EOC | LL_ADC_IT_EOS | LL_ADC_IT_OVR @@ -463,7 +463,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset register ISR */ SET_BIT(ADCx->ISR, - ( LL_ADC_FLAG_ADRDY + (LL_ADC_FLAG_ADRDY | LL_ADC_FLAG_EOC | LL_ADC_FLAG_EOS | LL_ADC_FLAG_OVR @@ -492,31 +492,31 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset register CFGR */ MODIFY_REG(ADCx->CFGR, - ( ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN + (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM | ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN | ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD | ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN - | ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN ), - ADC_CFGR_JQDIS + | ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN), + ADC_CFGR_JQDIS ); /* Reset register CFGR2 */ CLEAR_BIT(ADCx->CFGR2, - ( ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS + (ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) ); /* Reset register SMPR1 */ CLEAR_BIT(ADCx->SMPR1, - ( ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 + (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 | ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 | ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1) ); /* Reset register SMPR2 */ CLEAR_BIT(ADCx->SMPR2, - ( ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | ADC_SMPR2_SMP16 + (ADC_SMPR2_SMP18 | ADC_SMPR2_SMP17 | ADC_SMPR2_SMP16 | ADC_SMPR2_SMP15 | ADC_SMPR2_SMP14 | ADC_SMPR2_SMP13 | ADC_SMPR2_SMP12 | ADC_SMPR2_SMP11 | ADC_SMPR2_SMP10) ); @@ -532,19 +532,19 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset register SQR1 */ CLEAR_BIT(ADCx->SQR1, - ( ADC_SQR1_SQ4 | ADC_SQR1_SQ3 | ADC_SQR1_SQ2 + (ADC_SQR1_SQ4 | ADC_SQR1_SQ3 | ADC_SQR1_SQ2 | ADC_SQR1_SQ1 | ADC_SQR1_L) ); /* Reset register SQR2 */ CLEAR_BIT(ADCx->SQR2, - ( ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 + (ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7 | ADC_SQR2_SQ6 | ADC_SQR2_SQ5) ); /* Reset register SQR3 */ CLEAR_BIT(ADCx->SQR3, - ( ADC_SQR3_SQ14 | ADC_SQR3_SQ13 | ADC_SQR3_SQ12 + (ADC_SQR3_SQ14 | ADC_SQR3_SQ13 | ADC_SQR3_SQ12 | ADC_SQR3_SQ11 | ADC_SQR3_SQ10) ); @@ -553,10 +553,10 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset register JSQR */ CLEAR_BIT(ADCx->JSQR, - ( ADC_JSQR_JL + (ADC_JSQR_JL | ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 - | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ) + | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1) ); /* Reset register DR */ @@ -646,7 +646,7 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if (LL_ADC_IsEnabled(ADCx) == 0UL) { /* Configuration of ADC hierarchical scope: */ /* - ADC instance */ @@ -654,11 +654,11 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) /* - Set ADC conversion data alignment */ /* - Set ADC low power mode */ MODIFY_REG(ADCx->CFGR, - ADC_CFGR_RES + ADC_CFGR_RES | ADC_CFGR_ALIGN | ADC_CFGR_AUTDLY - , - ADC_InitStruct->Resolution + , + ADC_InitStruct->Resolution | ADC_InitStruct->DataAlignment | ADC_InitStruct->LowPowerMode ); @@ -728,7 +728,7 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); - if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); } @@ -738,7 +738,7 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if (LL_ADC_IsEnabled(ADCx) == 0UL) { /* Configuration of ADC hierarchical scope: */ /* - ADC group regular */ @@ -751,10 +751,10 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* - Set ADC group regular overrun behavior */ /* Note: On this STM32 serie, ADC trigger edge is set to value 0x0 by */ /* setting of trigger source to SW start. */ - if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { MODIFY_REG(ADCx->CFGR, - ADC_CFGR_EXTSEL + ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN | ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM @@ -762,8 +762,8 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I | ADC_CFGR_DMAEN | ADC_CFGR_DMACFG | ADC_CFGR_OVRMOD - , - ADC_REG_InitStruct->TriggerSource + , + ADC_REG_InitStruct->TriggerSource | ADC_REG_InitStruct->SequencerDiscont | ADC_REG_InitStruct->ContinuousMode | ADC_REG_InitStruct->DMATransfer @@ -773,7 +773,7 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I else { MODIFY_REG(ADCx->CFGR, - ADC_CFGR_EXTSEL + ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN | ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM @@ -781,8 +781,8 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I | ADC_CFGR_DMAEN | ADC_CFGR_DMACFG | ADC_CFGR_OVRMOD - , - ADC_REG_InitStruct->TriggerSource + , + ADC_REG_InitStruct->TriggerSource | LL_ADC_REG_SEQ_DISCONT_DISABLE | ADC_REG_InitStruct->ContinuousMode | ADC_REG_InitStruct->DMATransfer @@ -861,7 +861,7 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource)); assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength)); - if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) + if (ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) { assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont)); } @@ -869,7 +869,7 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I /* Note: Hardware constraint (refer to description of this function): */ /* ADC instance must be disabled. */ - if(LL_ADC_IsEnabled(ADCx) == 0UL) + if (LL_ADC_IsEnabled(ADCx) == 0UL) { /* Configuration of ADC hierarchical scope: */ /* - ADC group injected */ @@ -880,33 +880,33 @@ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_I /* from ADC group regular */ /* Note: On this STM32 serie, ADC trigger edge is set to value 0x0 by */ /* setting of trigger source to SW start. */ - if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + if (ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { MODIFY_REG(ADCx->CFGR, - ADC_CFGR_JDISCEN + ADC_CFGR_JDISCEN | ADC_CFGR_JAUTO - , - ADC_INJ_InitStruct->SequencerDiscont + , + ADC_INJ_InitStruct->SequencerDiscont | ADC_INJ_InitStruct->TrigAuto ); } else { MODIFY_REG(ADCx->CFGR, - ADC_CFGR_JDISCEN + ADC_CFGR_JDISCEN | ADC_CFGR_JAUTO - , - LL_ADC_REG_SEQ_DISCONT_DISABLE + , + LL_ADC_REG_SEQ_DISCONT_DISABLE | ADC_INJ_InitStruct->TrigAuto ); } MODIFY_REG(ADCx->JSQR, - ADC_JSQR_JEXTSEL + ADC_JSQR_JEXTSEL | ADC_JSQR_JEXTEN | ADC_JSQR_JL - , - ADC_INJ_InitStruct->TriggerSource + , + ADC_INJ_InitStruct->TriggerSource | ADC_INJ_InitStruct->SequencerLength ); } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c index e3974a2..772ae4c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c @@ -31,7 +31,7 @@ * @{ */ - +#if defined (COMP1) || defined (COMP2) /** @addtogroup COMP_LL COMP * @{ @@ -245,7 +245,7 @@ void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct) * @} */ - +#endif /* COMP1 || COMP2 */ /** * @} diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_exti.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_exti.c index 6c52351..6fbdc25 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_exti.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_exti.c @@ -90,19 +90,19 @@ ErrorStatus LL_EXTI_DeInit(void) LL_EXTI_WriteReg(SWIER1, 0x00000000U); /* Pending register set to default reset values */ - LL_EXTI_WriteReg(PR1, EXTI_PR1_PIF_Msk); + LL_EXTI_WriteReg(PR1, 0xFFFFFFFFu); /* Rising Trigger selection register 2 set to default reset values */ - LL_EXTI_WriteReg(RTSR2, 0x00000000U); + LL_EXTI_WriteReg(RTSR2, 0x00000000U); /* Falling Trigger selection register 2 set to default reset values */ - LL_EXTI_WriteReg(FTSR2, 0x00000000U); + LL_EXTI_WriteReg(FTSR2, 0x00000000U); /* Software interrupt event register 2 set to default reset values */ - LL_EXTI_WriteReg(SWIER2, 0x00000000U); + LL_EXTI_WriteReg(SWIER2, 0x00000000U); /* Pending register 2 set to default reset values */ - LL_EXTI_WriteReg(PR2, EXTI_PR2_PIF_Msk); + LL_EXTI_WriteReg(PR2, 0xFFFFFFFFu); /* Interrupt mask register set to default reset values */ LL_EXTI_WriteReg(IMR1, 0x00000000U); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c index 28c8aa7..a816c1c 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c @@ -190,9 +190,6 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru if (currentpin != 0x00u) { - /* Pin Mode configuration */ - LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) { /* Check Speed mode parameters */ @@ -200,6 +197,12 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru /* Speed mode configuration */ LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); } /* Pull-up Pull down resistor configuration*/ @@ -220,19 +223,13 @@ ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStru LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); } } + + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); } pinpos++; } - if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) - { - /* Check Output mode parameters */ - assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); - - /* Output mode configuration*/ - LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType); - - } return (SUCCESS); } diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c index 2c04e04..c19c719 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c @@ -99,6 +99,7 @@ ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx) /* Release reset of I2C clock */ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); } +#if defined(I2C3) else if (I2Cx == I2C3) { /* Force reset of I2C clock */ @@ -107,6 +108,7 @@ ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx) /* Release reset of I2C clock */ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3); } +#endif else { status = ERROR; diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c index 07b9411..ea02936 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c @@ -179,14 +179,6 @@ ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_Ini return result; } -/** - * @} - */ - -/** - * @} - */ - /** * @brief Disable the LPTIM instance * @rmtoll CR ENABLE LL_LPTIM_Disable @@ -215,16 +207,16 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) /* Save LPTIM source clock */ switch ((uint32_t)LPTIMx) { - case LPTIM1_BASE: - tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE); - break; + case LPTIM1_BASE: + tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE); - break; + case LPTIM2_BASE: + tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } /* Save LPTIM configuration registers */ @@ -245,16 +237,16 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) /* Force LPTIM source kernel clock from APB */ switch ((uint32_t)LPTIMx) { - case LPTIM1_BASE: - LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE_PCLK1); - break; + case LPTIM1_BASE: + LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE_PCLK1); + break; #if defined(LPTIM2) - case LPTIM2_BASE: - LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE_PCLK1); - break; + case LPTIM2_BASE: + LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE_PCLK1); + break; #endif /* LPTIM2 */ - default: - break; + default: + break; } if (tmpCMP != 0UL) @@ -267,7 +259,8 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) do { rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ - } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); + } + while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); LL_LPTIM_ClearFlag_CMPOK(LPTIMx); } @@ -282,11 +275,13 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) do { rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ - } while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); + } + while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); LL_LPTIM_ClearFlag_ARROK(LPTIMx); } + /* Restore LPTIM source kernel clock */ LL_RCC_SetLPTIMClockSource(tmpclksource); } @@ -300,6 +295,14 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) __enable_irq(); } +/** + * @} + */ + +/** + * @} + */ + /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c index df625ee..6f44fd2 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c @@ -22,11 +22,11 @@ #include "stm32wbxx_ll_lpuart.h" #include "stm32wbxx_ll_rcc.h" #include "stm32wbxx_ll_bus.h" -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) -#endif +#endif /* USE_FULL_ASSERT */ /** @addtogroup STM32WBxx_LL_Driver * @{ @@ -58,17 +58,17 @@ /* Check of parameters for configuration of LPUART registers */ #define IS_LL_LPUART_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPUART_PRESCALER_DIV1) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ - || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) /* __BAUDRATE__ Depending on constraints applicable for LPUART BRR register */ /* value : */ @@ -85,25 +85,25 @@ #define IS_LL_LPUART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x000FFFFFU) #define IS_LL_LPUART_DIRECTION(__VALUE__) (((__VALUE__) == LL_LPUART_DIRECTION_NONE) \ - || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ - || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ - || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) + || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) #define IS_LL_LPUART_PARITY(__VALUE__) (((__VALUE__) == LL_LPUART_PARITY_NONE) \ - || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ - || ((__VALUE__) == LL_LPUART_PARITY_ODD)) + || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ + || ((__VALUE__) == LL_LPUART_PARITY_ODD)) #define IS_LL_LPUART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_LPUART_DATAWIDTH_7B) \ - || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ - || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) + || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) #define IS_LL_LPUART_STOPBITS(__VALUE__) (((__VALUE__) == LL_LPUART_STOPBITS_1) \ - || ((__VALUE__) == LL_LPUART_STOPBITS_2)) + || ((__VALUE__) == LL_LPUART_STOPBITS_2)) #define IS_LL_LPUART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_LPUART_HWCONTROL_NONE) \ - || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ - || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ - || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) /** * @} diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pka.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pka.c index fdb04ad..6f3b661 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pka.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pka.c @@ -63,7 +63,6 @@ ((__VALUE__) == LL_PKA_MODE_MODULAR_ADD) ||\ ((__VALUE__) == LL_PKA_MODE_MODULAR_SUB) ||\ ((__VALUE__) == LL_PKA_MODE_MONTGOMERY_MUL)) - /** * @} */ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c index f3c6a09..33723ca 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c @@ -95,8 +95,10 @@ ErrorStatus LL_PWR_DeInit(void) LL_PWR_WriteReg(PDCRB, PWR_PDCRB_RESET_VALUE); LL_PWR_WriteReg(PUCRC, PWR_PUCRC_RESET_VALUE); LL_PWR_WriteReg(PDCRC, PWR_PDCRC_RESET_VALUE); +#if defined(GPIOD) LL_PWR_WriteReg(PUCRD, PWR_PUCRD_RESET_VALUE); LL_PWR_WriteReg(PDCRD, PWR_PDCRD_RESET_VALUE); +#endif LL_PWR_WriteReg(PUCRE, PWR_PUCRE_RESET_VALUE); LL_PWR_WriteReg(PDCRE, PWR_PDCRE_RESET_VALUE); LL_PWR_WriteReg(PUCRH, PWR_PUCRH_RESET_VALUE); @@ -112,8 +114,10 @@ ErrorStatus LL_PWR_DeInit(void) | LL_PWR_SCR_CCRPEF | LL_PWR_SCR_C802WUF | LL_PWR_SCR_CBLEWUF +#if defined(PWR_CR5_SMPSEN) | LL_PWR_SCR_CBORHF | LL_PWR_SCR_CSMPSFBF +#endif | LL_PWR_SCR_CWUF ); diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c index fc82e1c..23aa838 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c @@ -42,26 +42,39 @@ /** @addtogroup RCC_LL_Private_Macros * @{ */ -#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE)) +#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE) -#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE)) +#if defined(LPUART1) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) +#endif +#if defined(I2C3) #define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE)) +#else +#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) +#endif #define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \ || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE)) +#if defined(SAI1) #define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_SAI1_CLKSOURCE) +#endif #define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE)) #define IS_LL_RCC_CLK48_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CLK48_CLKSOURCE)) +#if defined(USB) #define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE)) +#endif #define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) +#if defined(SPI_I2S_SUPPORT) +#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2S_CLKSOURCE) +#endif /** * @} */ @@ -71,13 +84,21 @@ * @{ */ uint32_t RCC_PLL_GetFreqDomain_SYS(void); +#if defined(SAI1) uint32_t RCC_PLL_GetFreqDomain_SAI(void); +#endif uint32_t RCC_PLL_GetFreqDomain_ADC(void); uint32_t RCC_PLL_GetFreqDomain_48M(void); +#if defined(SAI1) uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void); uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void); uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void); +#endif + +#if defined(SPI_I2S_SUPPORT) +uint32_t RCC_PLL_GetFreqDomain_I2S(void); +#endif uint32_t RCC_GetSystemClockFreq(void); @@ -142,42 +163,49 @@ ErrorStatus LL_RCC_DeInit(void) /* Reset CFGR register */ LL_RCC_WriteReg(CFGR, 0x00070000U); /* MSI selected as System Clock and all prescaler to not divided */ - /* Reset CR register */ - vl_mask = 0xFFFFFFFFU; - /* Reset HSION, HSIKERON, HSIASFS, HSEON, PLLSYSON bits */ - CLEAR_BIT(vl_mask, (RCC_CR_HSION | RCC_CR_HSIASFS | RCC_CR_HSIKERON | RCC_CR_HSEON | RCC_CR_HSEBYP | RCC_CR_HSEPRE | RCC_CR_PLLON | RCC_CR_PLLSAI1ON)); + /* Wait for MSI oscillator used as system clock */ + while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI) + {} /* Write new mask in CR register */ - LL_RCC_WriteReg(CR, vl_mask); + LL_RCC_WriteReg(CR, 0x00000061); /* Wait for PLL READY bit to be reset */ - while(LL_RCC_PLL_IsReady() != 0U) + while (LL_RCC_PLL_IsReady() != 0U) {} /* Reset PLLCFGR register */ LL_RCC_WriteReg(PLLCFGR, 0x22041000U); +#if defined(SAI1) /* Wait for PLLSAI READY bit to be reset */ - while(LL_RCC_PLLSAI1_IsReady() != 0U) + while (LL_RCC_PLLSAI1_IsReady() != 0U) {} /* Reset PLLSAI1CFGR register */ LL_RCC_WriteReg(PLLSAI1CFGR, 0x22041000U); +#endif /* Disable all interrupts */ LL_RCC_WriteReg(CIER, 0x00000000U); /* Clear all interrupt flags */ - vl_mask = RCC_CICR_LSI1RDYC | RCC_CICR_LSERDYC | RCC_CICR_MSIRDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | RCC_CICR_PLLRDYC | RCC_CICR_PLLSAI1RDYC |\ +#if defined(SAI1) + vl_mask = RCC_CICR_LSI1RDYC | RCC_CICR_LSERDYC | RCC_CICR_MSIRDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | RCC_CICR_PLLRDYC | RCC_CICR_PLLSAI1RDYC | \ RCC_CICR_CSSC | RCC_CICR_HSI48RDYC | RCC_CICR_LSECSSC | RCC_CICR_LSI2RDYC; - +#else + vl_mask = RCC_CICR_LSI1RDYC | RCC_CICR_LSERDYC | RCC_CICR_MSIRDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | RCC_CICR_PLLRDYC | \ + RCC_CICR_CSSC | RCC_CICR_HSI48RDYC | RCC_CICR_LSECSSC | RCC_CICR_LSI2RDYC; +#endif LL_RCC_WriteReg(CICR, vl_mask); /* Clear reset flags */ LL_RCC_ClearResetFlags(); +#if defined(RCC_SMPS_SUPPORT) /* SMPS reset */ LL_RCC_WriteReg(SMPSCR, 0x00000301U); /* MSI default clock source */ +#endif /* RF Wakeup Clock Source selection */ LL_RCC_SetRFWKPClockSource(LL_RCC_RFWKP_CLKSOURCE_NONE); @@ -254,6 +282,7 @@ void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK1_Frequency); } +#if defined(RCC_SMPS_SUPPORT) /** * @brief Return SMPS clock frequency * @note This function is only applicable when CPU runs, @@ -269,7 +298,7 @@ uint32_t LL_RCC_GetSMPSClockFreq(void) uint32_t smps_prescaler_index = ((LL_RCC_GetSMPSPrescaler()) >> RCC_SMPSCR_SMPSDIV_Pos); uint32_t smpsClockSource = LL_RCC_GetSMPSClockSource(); - if(smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSI)/* SMPS Clock source is HSI Osc. */ + if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSI) /* SMPS Clock source is HSI Osc. */ { if (LL_RCC_HSI_IsReady() == 1U) { @@ -280,7 +309,7 @@ uint32_t LL_RCC_GetSMPSClockFreq(void) smps_frequency = LL_RCC_PERIPH_FREQUENCY_NO; } } - else if( smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSE) /* SMPS Clock source is HSE Osc. */ + else if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_HSE) /* SMPS Clock source is HSE Osc. */ { if (LL_RCC_HSE_IsReady() == 1U) { @@ -291,11 +320,11 @@ uint32_t LL_RCC_GetSMPSClockFreq(void) smps_frequency = LL_RCC_PERIPH_FREQUENCY_NO; } } - else if( smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_MSI) /* SMPS Clock source is MSI Osc. */ + else if (smpsClockSource == LL_RCC_SMPS_CLKSOURCE_STATUS_MSI) /* SMPS Clock source is MSI Osc. */ { uint32_t msiRange = LL_RCC_MSI_GetRange(); - if(msiRange == LL_RCC_MSIRANGE_8) + if (msiRange == LL_RCC_MSIRANGE_8) { smps_frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGE_8) / SmpsPrescalerTable[smps_prescaler_index][4]; } @@ -329,7 +358,7 @@ uint32_t LL_RCC_GetSMPSClockFreq(void) return smps_frequency; } - +#endif /** * @brief Return USARTx clock frequency @@ -411,6 +440,7 @@ uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) break; } } +#if defined(I2C3) else { /* I2C3 CLK clock frequency */ @@ -433,11 +463,12 @@ uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource) break; } } +#endif return i2c_frequency; } - +#if defined(LPUART1) /** * @brief Return LPUARTx clock frequency * @param LPUARTxSource This parameter can be one of the following values: @@ -481,6 +512,7 @@ uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) return lpuart_frequency; } +#endif /** * @brief Return LPTIMx clock frequency @@ -566,6 +598,7 @@ uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource) return lptim_frequency; } +#if defined(SAI1) /** * @brief Return SAIx clock frequency * @param SAIxSource This parameter can be one of the following values: @@ -591,12 +624,15 @@ uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource) } break; +#if defined(SAI1) case LL_RCC_SAI1_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SAI1 clock source */ if (LL_RCC_PLLSAI1_IsReady() == 1U) { sai_frequency = RCC_PLLSAI1_GetFreqDomain_SAI(); } break; +#endif + case LL_RCC_SAI1_CLKSOURCE_PLL: /* PLL clock used as SAI1 clock source */ if (LL_RCC_PLL_IsReady() == 1U) { @@ -611,6 +647,7 @@ uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource) } return sai_frequency; } +#endif /** * @brief Return CLK48x clock frequency @@ -627,14 +664,16 @@ uint32_t LL_RCC_GetCLK48ClockFreq(uint32_t CLK48xSource) assert_param(IS_LL_RCC_CLK48_CLKSOURCE(CLK48xSource)); /* CLK48CLK clock frequency */ - switch (LL_RCC_GetUSBClockSource(CLK48xSource)) + switch (LL_RCC_GetCLK48ClockSource(CLK48xSource)) { +#if defined(SAI1) case LL_RCC_CLK48_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as CLK48 clock source */ if (LL_RCC_PLLSAI1_IsReady() == 1U) { clk48_frequency = RCC_PLLSAI1_GetFreqDomain_48M(); } break; +#endif case LL_RCC_CLK48_CLKSOURCE_PLL: /* PLL clock used as CLK48 clock source */ if (LL_RCC_PLL_IsReady() == 1U) @@ -662,6 +701,7 @@ uint32_t LL_RCC_GetCLK48ClockFreq(uint32_t CLK48xSource) return clk48_frequency; } +#if defined(USB) /** * @brief Return USBx clock frequency * @param USBxSource This parameter can be one of the following values: @@ -673,6 +713,7 @@ uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource) { return LL_RCC_GetCLK48ClockFreq(USBxSource); } +#endif /** * @brief Return RNGx clock frequency @@ -690,7 +731,7 @@ uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource)); /* RNGCLK clock frequency */ - if(rngClockSource == LL_RCC_RNG_CLKSOURCE_LSI) /* LSI clock used as RNG clock source */ + if (rngClockSource == LL_RCC_RNG_CLKSOURCE_LSI) /* LSI clock used as RNG clock source */ { const uint32_t temp_lsi1Status = LL_RCC_LSI1_IsReady(); const uint32_t temp_lsi2Status = LL_RCC_LSI2_IsReady(); @@ -699,7 +740,7 @@ uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) rng_frequency = LSI_VALUE; } } - else if(rngClockSource == LL_RCC_RNG_CLKSOURCE_LSE) /* LSE clock used as RNG clock source */ + else if (rngClockSource == LL_RCC_RNG_CLKSOURCE_LSE) /* LSE clock used as RNG clock source */ { if (LL_RCC_LSE_IsReady() == 1U) { @@ -709,7 +750,7 @@ uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource) else /* CLK48 clock used as RNG clock source */ { /* Systematic Div by 3 */ - rng_frequency = LL_RCC_GetCLK48ClockFreq(LL_RCC_CLK48_CLKSOURCE)/ 3U; + rng_frequency = LL_RCC_GetCLK48ClockFreq(LL_RCC_CLK48_CLKSOURCE) / 3U; } return rng_frequency; } @@ -732,18 +773,20 @@ uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource) /* ADCCLK clock frequency */ switch (LL_RCC_GetADCClockSource(ADCxSource)) { +#if defined(SAI1) case LL_RCC_ADC_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as ADC clock source */ if (LL_RCC_PLLSAI1_IsReady() == 1U) { adc_frequency = RCC_PLLSAI1_GetFreqDomain_ADC(); } break; +#endif case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ adc_frequency = RCC_GetSystemClockFreq(); break; - case LL_RCC_ADC_CLKSOURCE_PLL: /* PLL clock used as USB clock source */ + case LL_RCC_ADC_CLKSOURCE_PLL: /* PLL clock used as ADC clock source */ if (LL_RCC_PLL_IsReady() == 1U) { adc_frequency = RCC_PLL_GetFreqDomain_ADC(); @@ -842,6 +885,46 @@ uint32_t LL_RCC_GetRFWKPClockFreq(void) return rfwkp_frequency; } +#if defined(SPI_I2S_SUPPORT) +/** + * @brief Return I2Sx clock frequency + * @param I2SxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2S_CLKSOURCE + * @retval I2S clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLLs (PLL) is not ready + */ +uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) +{ + uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); + + /* I2SCLK clock frequency */ + switch (LL_RCC_GetI2SClockSource(I2SxSource)) + { + case LL_RCC_I2S_CLKSOURCE_PLL: /* I2S2 Clock is PLL"P" */ + if (LL_RCC_PLL_IsReady() == 1U) + { + i2s_frequency = RCC_PLL_GetFreqDomain_I2S(); + } + break; + + case LL_RCC_I2S_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ + i2s_frequency = EXTERNAL_CLOCK_VALUE; + break; + + case LL_RCC_I2S_CLKSOURCE_HSI: /* HSI clock used as I2S clock source */ + default: + if (LL_RCC_HSI_IsReady() == 1U) + { + i2s_frequency = HSI_VALUE; + } + break; + } + return i2s_frequency; +} +#endif /** * @} @@ -1023,6 +1106,7 @@ uint32_t RCC_PLL_GetFreqDomain_SYS(void) LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR()); } +#if defined(SAI1) /** * @brief Return PLL clock (PLLPCLK) frequency used for SAI domain * @retval PLLPCLK clock frequency (in Hz) @@ -1064,6 +1148,7 @@ uint32_t RCC_PLL_GetFreqDomain_SAI(void) return __LL_RCC_CALC_PLLCLK_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); } +#endif /** * @brief Return PLL clock (PLLPCLK) frequency used for ADC domain @@ -1089,14 +1174,14 @@ uint32_t RCC_PLL_GetFreqDomain_ADC(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; @@ -1133,14 +1218,14 @@ uint32_t RCC_PLL_GetFreqDomain_48M(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; @@ -1152,6 +1237,7 @@ uint32_t RCC_PLL_GetFreqDomain_48M(void) LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ()); } +#if defined(SAI1) /** * @brief Return PLLSAI1 clock (PLLSAI1PCLK) frequency used for SAI domain * @retval PLLSAI1PCLK clock frequency (in Hz) @@ -1175,14 +1261,14 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; @@ -1217,14 +1303,14 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void) break; case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */ - if (LL_RCC_HSE_IsEnabledDiv2() == 1U) - { - pllinputfreq = HSE_VALUE / 2U; - } - else - { - pllinputfreq = HSE_VALUE; - } + if (LL_RCC_HSE_IsEnabledDiv2() == 1U) + { + pllinputfreq = HSE_VALUE / 2U; + } + else + { + pllinputfreq = HSE_VALUE; + } break; default: @@ -1275,7 +1361,37 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void) return __LL_RCC_CALC_PLLSAI1_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), LL_RCC_PLLSAI1_GetN(), LL_RCC_PLLSAI1_GetR()); } +#endif + +#if defined(SPI_I2S_SUPPORT) +/** + * @brief Return PLL clock frequency used for I2S domain + * @retval PLL clock frequency (in Hz) + */ +uint32_t RCC_PLL_GetFreqDomain_I2S(void) +{ + uint32_t pllinputfreq, pllsource; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN + I2S Domain clock = PLL_VCO / PLLP + */ + pllsource = LL_RCC_PLL_GetMainSource(); + switch (pllsource) + { + case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllinputfreq = HSE_VALUE; + break; + + case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + default: + pllinputfreq = HSI_VALUE; + break; + } + return __LL_RCC_CALC_PLLCLK_I2S_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), + LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); +} +#endif /** * @} diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rng.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rng.c index 3300012..07a660f 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rng.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rng.c @@ -42,7 +42,7 @@ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ -/** @addtogroup RNG_LL_Private_Macros +/** @defgroup RNG_LL_Private_Macros RNG Private Macros * @{ */ #define IS_LL_RNG_CED(__MODE__) (((__MODE__) == LL_RNG_CED_ENABLE) || \ diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c index a021a33..1301719 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c @@ -21,6 +21,7 @@ /* Includes ------------------------------------------------------------------*/ #include "stm32wbxx_ll_spi.h" #include "stm32wbxx_ll_bus.h" +#include "stm32wbxx_ll_rcc.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" @@ -59,52 +60,52 @@ /** @defgroup SPI_LL_Private_Macros SPI Private Macros * @{ */ -#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ - || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ - || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ - || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) +#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ + || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) #define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ - || ((__VALUE__) == LL_SPI_MODE_SLAVE)) - -#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) \ - || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) + || ((__VALUE__) == LL_SPI_MODE_SLAVE)) + +#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) #define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ - || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) + || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) #define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ - || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) + || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) -#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ - || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ - || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) +#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) -#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ - || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) +#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) #define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ - || ((__VALUE__) == LL_SPI_MSB_FIRST)) + || ((__VALUE__) == LL_SPI_MSB_FIRST)) #define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ - || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) + || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) #define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) @@ -232,6 +233,10 @@ ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) status = SUCCESS; } +#if defined (SPI_I2S_SUPPORT) + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2S_SUPPORT */ return status; } @@ -268,6 +273,251 @@ void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) * @} */ +#if defined(SPI_I2S_SUPPORT) +/** @addtogroup I2S_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Constants I2S Private Constants + * @{ + */ +/* I2S registers Masks */ +#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) + +#define I2S_I2SPR_CLEAR_MASK 0x0002U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Macros I2S Private Macros + * @{ + */ + +#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) + +#define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ + || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) + +#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ + || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) + +#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ + || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) + +#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ + || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) + +#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ + && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ + || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) + +#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) + +#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ + || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI/I2S registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) +{ + return LL_SPI_DeInit(SPIx); +} + +/** + * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are Initialized + * - ERROR: SPI registers are not Initialized + */ +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) +{ + uint32_t i2sdiv = 2U; + uint32_t i2sodd = 0U; + uint32_t packetlength = 1U; + uint32_t tmp; + uint32_t sourceclock; + ErrorStatus status = ERROR; + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); + assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); + assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); + assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); + assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); + assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); + + if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx I2SCFGR Configuration -------------------- + * Configure SPIx I2SCFGR with parameters: + * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit + * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits + * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits + * - ClockPolarity: SPI_I2SCFGR_CKPOL bit + */ + + /* Write to SPIx I2SCFGR */ + MODIFY_REG(SPIx->I2SCFGR, + I2S_I2SCFGR_CLEAR_MASK, + I2S_InitStruct->Mode | I2S_InitStruct->Standard | + I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | + SPI_I2SCFGR_I2SMOD); + + /*---------------------------- SPIx I2SPR Configuration ---------------------- + * Configure SPIx I2SPR with parameters: + * - MCLKOutput: SPI_I2SPR_MCKOE bit + * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits + */ + + /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) + * else, default values are used: i2sodd = 0U, i2sdiv = 2U. + */ + if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) + * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). + */ + if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) + { + /* Packet length is 32 bits */ + packetlength = 2U; + } + + /* If an external I2S clock has to be used, the specific define should be set + in the project configuration or in the stm32wbxx_ll_rcc.h file */ + /* Get the I2S source clock value */ + sourceclock = LL_RCC_GetI2SClockFreq(LL_RCC_I2S_CLKSOURCE); + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + else + { + /* MCLK output is disabled */ + tmp = (((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + + /* Remove the floating point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (tmp & (uint16_t)0x0001U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = ((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (i2sodd << 8U); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Write to SPIx I2SPR register the computed value */ + WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); + + status = SUCCESS; + } + return status; +} + +/** + * @brief Set each @ref LL_I2S_InitTypeDef field to default value. + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) +{ + /*--------------- Reset I2S init structure parameters values -----------------*/ + I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; + I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; + I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; + I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; + I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; + I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; +} + +/** + * @brief Set linear and parity prescaler. + * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n + * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). + * @param SPIx SPI Instance + * @param PrescalerLinear value Min_Data=0x02 and Max_Data=0xFF. + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) +{ + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); + assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); + + /* Write to SPIx I2SPR */ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* SPI_I2S_SUPPORT */ + #endif /* defined (SPI1) || defined (SPI2) */ /** diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c index ff13b61..ba79b2a 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c @@ -262,7 +262,7 @@ void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; TIM_InitStruct->Autoreload = 0xFFFFFFFFU; TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; - TIM_InitStruct->RepetitionCounter = (uint8_t)0x00; + TIM_InitStruct->RepetitionCounter = 0x00000000U; } /** @@ -654,9 +654,9 @@ void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) * and DTG[7:0] can be write-locked depending on the LOCK configuration, it * can be necessary to configure all of them during the first write access to * the TIMx_BDTR register. - * @note Macro @ref IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a break input. - * @note Macro @ref IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not + * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not * a timer instance provides a second break input. * @param TIMx Timer Instance * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure) diff --git a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c index 942a274..ce9cbc1 100644 --- a/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c +++ b/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c @@ -42,12 +42,14 @@ * @{ */ #define UTILS_MAX_FREQUENCY_SCALE1 64000000U /*!< Maximum frequency for system clock at power scale1, in Hz */ +#if defined(PWR_CR1_VOS) #define UTILS_MAX_FREQUENCY_SCALE2 16000000U /*!< Maximum frequency for system clock at power scale2, in Hz */ +#endif /* Defines used for PLL range */ -#define UTILS_PLLVCO_INPUT_MIN 4000000U /*!< Frequency min for PLLVCO input, in Hz */ -#define UTILS_PLLVCO_INPUT_MAX 16000000U /*!< Frequency max for PLLVCO input, in Hz */ -#define UTILS_PLLVCO_OUTPUT_MIN 64000000U /*!< Frequency min for PLLVCO output, in Hz */ +#define UTILS_PLLVCO_INPUT_MIN 2660000U /*!< Frequency min for PLLVCO input, in Hz */ +#define UTILS_PLLVCO_INPUT_MAX 16000000U /*!< Frequency max for PLLVCO input, in Hz */ +#define UTILS_PLLVCO_OUTPUT_MIN 96000000U /*!< Frequency min for PLLVCO output, in Hz */ #define UTILS_PLLVCO_OUTPUT_MAX 344000000U /*!< Frequency max for PLLVCO output, in Hz */ /* Defines used for HCLK2 frequency check */ @@ -97,7 +99,7 @@ || ((__VALUE__) == LL_RCC_PLLM_DIV_7) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_8)) -#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) #define IS_LL_UTILS_PLLR_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLR_DIV_2) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_3) \ @@ -111,8 +113,12 @@ #define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX)) +#if defined(PWR_CR1_VOS) #define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2)) +#else +#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) +#endif #define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) @@ -125,10 +131,10 @@ /** @defgroup UTILS_LL_Private_Functions UTILS Private functions * @{ */ - static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); - static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK4_Frequency); - static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); - static ErrorStatus UTILS_PLL_IsBusy(void); +static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct); +static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK4_Frequency); +static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +static ErrorStatus UTILS_PLL_IsBusy(void); /** * @} @@ -251,8 +257,8 @@ void LL_SetSystemCoreClock(uint32_t HCLKFrequency) * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((MSI frequency / PLLM) * PLLN) / PLLR) - * - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = MSI frequency / PLLM) - * - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = MSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 64000000 Hz is reached (PLLVCO_output / PLLR) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. @@ -269,7 +275,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS uint32_t pllrfreq, hclk2freq, msi_range; /* Check if one of the PLL is enabled */ - if(UTILS_PLL_IsBusy() == SUCCESS) + if (UTILS_PLL_IsBusy() == SUCCESS) { /* Get the current MSI range & check coherency */ msi_range = LL_RCC_MSI_GetRange(); @@ -281,7 +287,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS case LL_RCC_MSIRANGE_3: /* MSI = 800 KHz */ case LL_RCC_MSIRANGE_4: /* MSI = 1 MHz */ case LL_RCC_MSIRANGE_5: /* MSI = 2 MHz */ - /* PLLVCO input frequency can not in the range from 4 to 16 MHz*/ + /* PLLVCO input frequency can not in the range from 2.66 to 16 MHz*/ status = ERROR; break; @@ -298,7 +304,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS /* PLL is ready, MSI range is valid and HCLK2 frequency is coherent Main PLL configuration and activation */ - if(status != ERROR) + if (status != ERROR) { /* Calculate the new PLL output frequency & verify all PLL stages are correct (VCO input ranges, VCO output ranges & SYSCLK max) when assert activated */ @@ -315,7 +321,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS { /* Enable MSI if not enabled */ - if(LL_RCC_MSI_IsReady() != 1U) + if (LL_RCC_MSI_IsReady() != 1U) { LL_RCC_MSI_Enable(); while ((LL_RCC_MSI_IsReady() != 1U)) @@ -349,8 +355,8 @@ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLR) - * - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSI frequency / PLLM) - * - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = HSI frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 64000000 Hz is reach (PLLVCO_output / PLLR) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. @@ -367,7 +373,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS uint32_t pllrfreq, hclk2freq; /* Check if one of the PLL is enabled */ - if(UTILS_PLL_IsBusy() == SUCCESS) + if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ pllrfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); @@ -382,7 +388,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS else { /* Enable HSI if not enabled */ - if(LL_RCC_HSI_IsReady() != 1U) + if (LL_RCC_HSI_IsReady() != 1U) { LL_RCC_HSI_Enable(); while (LL_RCC_HSI_IsReady() != 1U) @@ -415,8 +421,8 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLR) - * - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSE frequency / PLLM) - * - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) + * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = HSE frequency / PLLM) + * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 64000000 Hz is reached (PLLVCO_output / PLLR) * @param HSEBypass This parameter can be one of the following values: * @arg @ref LL_UTILS_HSEBYPASS_ON @@ -429,7 +435,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitS * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ -ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEBypass,LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEBypass, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status; uint32_t pllrfreq, hclk2freq; @@ -438,7 +444,7 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEBypass,LL_UTILS_PLLInitType assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass)); /* Check if one of the PLL is enabled */ - if(UTILS_PLL_IsBusy() == SUCCESS) + if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ pllrfreq = UTILS_GetPLLOutputFrequency(HSE_VALUE, UTILS_PLLInitStruct); @@ -454,10 +460,10 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEBypass,LL_UTILS_PLLInitType { /* Enable HSE if not enabled */ - if(LL_RCC_HSE_IsReady() != 1U) + if (LL_RCC_HSE_IsReady() != 1U) { /* Check if need to enable HSE bypass feature or not */ - if(HSEBypass == LL_UTILS_HSEBYPASS_ON) + if (HSEBypass == LL_UTILS_HSEBYPASS_ON) { LL_RCC_HSE_EnableBypass(); } @@ -522,24 +528,27 @@ static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK4_Frequency) /* Flash Clock source (HCLK4) range in MHz with a VCORE is range1 */ const uint32_t UTILS_CLK_SRC_RANGE_VOS1[] = {18000000U, 36000000U, 54000000U, UTILS_MAX_FREQUENCY_SCALE1}; +#if defined(PWR_CR1_VOS) /* Flash Clock source (HCLK4) range in MHz with a VCORE is range2 */ const uint32_t UTILS_CLK_SRC_RANGE_VOS2[] = {6000000U, 12000000U, UTILS_MAX_FREQUENCY_SCALE2}; +#endif /* Flash Latency range */ const uint32_t UTILS_LATENCY_RANGE[] = {LL_FLASH_LATENCY_0, LL_FLASH_LATENCY_1, LL_FLASH_LATENCY_2, LL_FLASH_LATENCY_3}; /* Frequency cannot be equal to 0 */ - if(HCLK4_Frequency == 0U) + if (HCLK4_Frequency == 0U) { status = ERROR; } else { - if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) +#if defined(PWR_CR1_VOS) + if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) { - for(index = 0; index < countof(UTILS_CLK_SRC_RANGE_VOS1); index++) + for (index = 0; index < countof(UTILS_CLK_SRC_RANGE_VOS1); index++) { - if(HCLK4_Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) + if (HCLK4_Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) { latency = UTILS_LATENCY_RANGE[index]; break; @@ -548,15 +557,25 @@ static ErrorStatus UTILS_SetFlashLatency(uint32_t HCLK4_Frequency) } else /* SCALE2 */ { - for(index = 0; index < countof(UTILS_CLK_SRC_RANGE_VOS2); index++) + for (index = 0; index < countof(UTILS_CLK_SRC_RANGE_VOS2); index++) { - if(HCLK4_Frequency <= UTILS_CLK_SRC_RANGE_VOS2[index]) + if (HCLK4_Frequency <= UTILS_CLK_SRC_RANGE_VOS2[index]) { latency = UTILS_LATENCY_RANGE[index]; break; } } } +#else + for (index = 0; index < countof(UTILS_CLK_SRC_RANGE_VOS1); index++) + { + if (HCLK4_Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) + { + latency = UTILS_LATENCY_RANGE[index]; + break; + } + } +#endif LL_FLASH_SetLatency(latency); @@ -586,11 +605,11 @@ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTIL assert_param(IS_LL_UTILS_PLLR_VALUE(UTILS_PLLInitStruct->PLLR)); /* Check different PLL parameters according to RM */ - /* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz. */ + /* - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz. */ pllfreq = PLL_InputFrequency / (((UTILS_PLLInitStruct->PLLM >> RCC_PLLCFGR_PLLM_Pos) + 1U)); assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq)); - /* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz.*/ + /* - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz.*/ pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos)); assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); @@ -612,17 +631,19 @@ static ErrorStatus UTILS_PLL_IsBusy(void) ErrorStatus status = SUCCESS; /* Check if PLL is busy*/ - if(LL_RCC_PLL_IsReady() != 0U) + if (LL_RCC_PLL_IsReady() != 0U) { /* PLL configuration cannot be modified */ status = ERROR; } +#if defined(SAI1) /* Check if PLLSAI1 is busy*/ - if(LL_RCC_PLLSAI1_IsReady() != 0U) + if (LL_RCC_PLLSAI1_IsReady() != 0U) { /* PLLSAI1 configuration cannot be modified */ status = ERROR; } +#endif return status; } @@ -655,14 +676,14 @@ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_ hclks_frequency_current = __LL_RCC_CALC_HCLK4_FREQ(sysclk_current, LL_RCC_GetAHB4Prescaler()); /* Increasing the number of wait states because of higher CPU frequency */ - if(hclks_frequency_current < hclks_frequency_target) + if (hclks_frequency_current < hclks_frequency_target) { /* Set FLASH latency to highest latency */ status = UTILS_SetFlashLatency(hclks_frequency_target); } /* Update system clock configuration */ - if(status == SUCCESS) + if (status == SUCCESS) { /* Enable PLL */ LL_RCC_PLL_Enable(); @@ -688,14 +709,14 @@ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_ } /* Decreasing the number of wait states because of lower CPU frequency */ - if(hclks_frequency_current > hclks_frequency_target) + if (hclks_frequency_current > hclks_frequency_target) { /* Set FLASH latency to lowest latency */ status = UTILS_SetFlashLatency(hclks_frequency_target); } /* Update SystemCoreClock variable */ - if(status == SUCCESS) + if (status == SUCCESS) { LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK1_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->CPU1CLKDivider)); }