You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

465 lines
17 KiB

  1. /**
  2. ******************************************************************************
  3. * @file stm32f7xx_hal_conf_template.h
  4. * @author MCD Application Team
  5. * @version V1.2.2
  6. * @date 14-April-2017
  7. * @brief HAL configuration template file.
  8. * This file should be copied to the application folder and renamed
  9. * to stm32f7xx_hal_conf.h.
  10. ******************************************************************************
  11. * @attention
  12. *
  13. * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  14. *
  15. * Redistribution and use in source and binary forms, with or without modification,
  16. * are permitted provided that the following conditions are met:
  17. * 1. Redistributions of source code must retain the above copyright notice,
  18. * this list of conditions and the following disclaimer.
  19. * 2. Redistributions in binary form must reproduce the above copyright notice,
  20. * this list of conditions and the following disclaimer in the documentation
  21. * and/or other materials provided with the distribution.
  22. * 3. Neither the name of STMicroelectronics nor the names of its contributors
  23. * may be used to endorse or promote products derived from this software
  24. * without specific prior written permission.
  25. *
  26. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  27. * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  28. * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  29. * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  30. * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  31. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  32. * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  33. * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  34. * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  35. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  36. *
  37. ******************************************************************************
  38. */
  39. /* Define to prevent recursive inclusion -------------------------------------*/
  40. #ifndef __STM32F7xx_HAL_CONF_H
  41. #define __STM32F7xx_HAL_CONF_H
  42. #ifdef __cplusplus
  43. extern "C" {
  44. #endif
  45. /* Exported types ------------------------------------------------------------*/
  46. /* Exported constants --------------------------------------------------------*/
  47. /* ########################## Module Selection ############################## */
  48. /**
  49. * @brief This is the list of modules to be used in the HAL driver
  50. */
  51. #define HAL_MODULE_ENABLED
  52. #define HAL_ADC_MODULE_ENABLED
  53. #define HAL_CAN_MODULE_ENABLED
  54. #define HAL_CEC_MODULE_ENABLED
  55. #define HAL_CRC_MODULE_ENABLED
  56. #define HAL_CRYP_MODULE_ENABLED
  57. #define HAL_DAC_MODULE_ENABLED
  58. #define HAL_DCMI_MODULE_ENABLED
  59. #define HAL_DMA_MODULE_ENABLED
  60. #define HAL_DMA2D_MODULE_ENABLED
  61. #define HAL_ETH_MODULE_ENABLED
  62. #define HAL_FLASH_MODULE_ENABLED
  63. #define HAL_NAND_MODULE_ENABLED
  64. #define HAL_NOR_MODULE_ENABLED
  65. #define HAL_SRAM_MODULE_ENABLED
  66. #define HAL_SDRAM_MODULE_ENABLED
  67. #define HAL_HASH_MODULE_ENABLED
  68. #define HAL_GPIO_MODULE_ENABLED
  69. #define HAL_I2C_MODULE_ENABLED
  70. #define HAL_I2S_MODULE_ENABLED
  71. #define HAL_IWDG_MODULE_ENABLED
  72. #define HAL_LPTIM_MODULE_ENABLED
  73. #define HAL_LTDC_MODULE_ENABLED
  74. #define HAL_PWR_MODULE_ENABLED
  75. #define HAL_QSPI_MODULE_ENABLED
  76. #define HAL_RCC_MODULE_ENABLED
  77. #define HAL_RNG_MODULE_ENABLED
  78. #define HAL_RTC_MODULE_ENABLED
  79. #define HAL_SAI_MODULE_ENABLED
  80. #define HAL_SD_MODULE_ENABLED
  81. #define HAL_SPDIFRX_MODULE_ENABLED
  82. #define HAL_SPI_MODULE_ENABLED
  83. #define HAL_TIM_MODULE_ENABLED
  84. #define HAL_UART_MODULE_ENABLED
  85. #define HAL_USART_MODULE_ENABLED
  86. #define HAL_IRDA_MODULE_ENABLED
  87. #define HAL_SMARTCARD_MODULE_ENABLED
  88. #define HAL_WWDG_MODULE_ENABLED
  89. #define HAL_CORTEX_MODULE_ENABLED
  90. #define HAL_PCD_MODULE_ENABLED
  91. #define HAL_HCD_MODULE_ENABLED
  92. #define HAL_DFSDM_MODULE_ENABLED
  93. #define HAL_DSI_MODULE_ENABLED
  94. #define HAL_JPEG_MODULE_ENABLED
  95. #define HAL_MDIOS_MODULE_ENABLED
  96. #define HAL_SMBUS_MODULE_ENABLED
  97. #define HAL_MMC_MODULE_ENABLED
  98. /* ########################## HSE/HSI Values adaptation ##################### */
  99. /**
  100. * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  101. * This value is used by the RCC HAL module to compute the system frequency
  102. * (when HSE is used as system clock source, directly or through the PLL).
  103. */
  104. #if !defined (HSE_VALUE)
  105. #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
  106. #endif /* HSE_VALUE */
  107. #if !defined (HSE_STARTUP_TIMEOUT)
  108. #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
  109. #endif /* HSE_STARTUP_TIMEOUT */
  110. /**
  111. * @brief Internal High Speed oscillator (HSI) value.
  112. * This value is used by the RCC HAL module to compute the system frequency
  113. * (when HSI is used as system clock source, directly or through the PLL).
  114. */
  115. #if !defined (HSI_VALUE)
  116. #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
  117. #endif /* HSI_VALUE */
  118. /**
  119. * @brief Internal Low Speed oscillator (LSI) value.
  120. */
  121. #if !defined (LSI_VALUE)
  122. #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
  123. #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
  124. The real value may vary depending on the variations
  125. in voltage and temperature. */
  126. /**
  127. * @brief External Low Speed oscillator (LSE) value.
  128. */
  129. #if !defined (LSE_VALUE)
  130. #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
  131. #endif /* LSE_VALUE */
  132. #if !defined (LSE_STARTUP_TIMEOUT)
  133. #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
  134. #endif /* LSE_STARTUP_TIMEOUT */
  135. /**
  136. * @brief External clock source for I2S peripheral
  137. * This value is used by the I2S HAL module to compute the I2S clock source
  138. * frequency, this source is inserted directly through I2S_CKIN pad.
  139. */
  140. #if !defined (EXTERNAL_CLOCK_VALUE)
  141. #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/
  142. #endif /* EXTERNAL_CLOCK_VALUE */
  143. /* Tip: To avoid modifying this file each time you need to use different HSE,
  144. === you can define the HSE value in your toolchain compiler preprocessor. */
  145. /* ########################### System Configuration ######################### */
  146. /**
  147. * @brief This is the HAL system configuration section
  148. */
  149. #define VDD_VALUE 3300U /*!< Value of VDD in mv */
  150. #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
  151. #define USE_RTOS 0U
  152. #define PREFETCH_ENABLE 1U
  153. #define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */
  154. /* ########################## Assert Selection ############################## */
  155. /**
  156. * @brief Uncomment the line below to expanse the "assert_param" macro in the
  157. * HAL drivers code
  158. */
  159. /* #define USE_FULL_ASSERT 1 */
  160. /* ################## Ethernet peripheral configuration ##################### */
  161. /* Section 1 : Ethernet peripheral configuration */
  162. /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
  163. #define MAC_ADDR0 2U
  164. #define MAC_ADDR1 0U
  165. #define MAC_ADDR2 0U
  166. #define MAC_ADDR3 0U
  167. #define MAC_ADDR4 0U
  168. #define MAC_ADDR5 0U
  169. /* Definition of the Ethernet driver buffers size and count */
  170. #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
  171. #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
  172. #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
  173. #define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
  174. /* Section 2: PHY configuration section */
  175. /* DP83848 PHY Address*/
  176. #define DP83848_PHY_ADDRESS 0x01U
  177. /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
  178. #define PHY_RESET_DELAY 0x000000FFU
  179. /* PHY Configuration delay */
  180. #define PHY_CONFIG_DELAY 0x00000FFFU
  181. #define PHY_READ_TO 0x0000FFFFU
  182. #define PHY_WRITE_TO 0x0000FFFFU
  183. /* Section 3: Common PHY Registers */
  184. #define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
  185. #define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
  186. #define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
  187. #define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
  188. #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
  189. #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
  190. #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
  191. #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
  192. #define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
  193. #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
  194. #define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
  195. #define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
  196. #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
  197. #define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
  198. #define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
  199. /* Section 4: Extended PHY Registers */
  200. #define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
  201. #define PHY_MICR ((uint16_t)0x11U) /*!< MII Interrupt Control Register */
  202. #define PHY_MISR ((uint16_t)0x12U) /*!< MII Interrupt Status and Misc. Control Register */
  203. #define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */
  204. #define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
  205. #define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
  206. #define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */
  207. #define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */
  208. #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */
  209. #define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */
  210. /* ################## SPI peripheral configuration ########################## */
  211. /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
  212. * Activated: CRC code is present inside driver
  213. * Deactivated: CRC code cleaned from driver
  214. */
  215. #define USE_SPI_CRC 1U
  216. /* Includes ------------------------------------------------------------------*/
  217. /**
  218. * @brief Include module's header file
  219. */
  220. #ifdef HAL_RCC_MODULE_ENABLED
  221. #include "stm32f7xx_hal_rcc.h"
  222. #endif /* HAL_RCC_MODULE_ENABLED */
  223. #ifdef HAL_GPIO_MODULE_ENABLED
  224. #include "stm32f7xx_hal_gpio.h"
  225. #endif /* HAL_GPIO_MODULE_ENABLED */
  226. #ifdef HAL_DMA_MODULE_ENABLED
  227. #include "stm32f7xx_hal_dma.h"
  228. #endif /* HAL_DMA_MODULE_ENABLED */
  229. #ifdef HAL_CORTEX_MODULE_ENABLED
  230. #include "stm32f7xx_hal_cortex.h"
  231. #endif /* HAL_CORTEX_MODULE_ENABLED */
  232. #ifdef HAL_ADC_MODULE_ENABLED
  233. #include "stm32f7xx_hal_adc.h"
  234. #endif /* HAL_ADC_MODULE_ENABLED */
  235. #ifdef HAL_CAN_MODULE_ENABLED
  236. #include "stm32f7xx_hal_can.h"
  237. #endif /* HAL_CAN_MODULE_ENABLED */
  238. #ifdef HAL_CEC_MODULE_ENABLED
  239. #include "stm32f7xx_hal_cec.h"
  240. #endif /* HAL_CEC_MODULE_ENABLED */
  241. #ifdef HAL_CRC_MODULE_ENABLED
  242. #include "stm32f7xx_hal_crc.h"
  243. #endif /* HAL_CRC_MODULE_ENABLED */
  244. #ifdef HAL_CRYP_MODULE_ENABLED
  245. #include "stm32f7xx_hal_cryp.h"
  246. #endif /* HAL_CRYP_MODULE_ENABLED */
  247. #ifdef HAL_DMA2D_MODULE_ENABLED
  248. #include "stm32f7xx_hal_dma2d.h"
  249. #endif /* HAL_DMA2D_MODULE_ENABLED */
  250. #ifdef HAL_DAC_MODULE_ENABLED
  251. #include "stm32f7xx_hal_dac.h"
  252. #endif /* HAL_DAC_MODULE_ENABLED */
  253. #ifdef HAL_DCMI_MODULE_ENABLED
  254. #include "stm32f7xx_hal_dcmi.h"
  255. #endif /* HAL_DCMI_MODULE_ENABLED */
  256. #ifdef HAL_ETH_MODULE_ENABLED
  257. #include "stm32f7xx_hal_eth.h"
  258. #endif /* HAL_ETH_MODULE_ENABLED */
  259. #ifdef HAL_FLASH_MODULE_ENABLED
  260. #include "stm32f7xx_hal_flash.h"
  261. #endif /* HAL_FLASH_MODULE_ENABLED */
  262. #ifdef HAL_SRAM_MODULE_ENABLED
  263. #include "stm32f7xx_hal_sram.h"
  264. #endif /* HAL_SRAM_MODULE_ENABLED */
  265. #ifdef HAL_NOR_MODULE_ENABLED
  266. #include "stm32f7xx_hal_nor.h"
  267. #endif /* HAL_NOR_MODULE_ENABLED */
  268. #ifdef HAL_NAND_MODULE_ENABLED
  269. #include "stm32f7xx_hal_nand.h"
  270. #endif /* HAL_NAND_MODULE_ENABLED */
  271. #ifdef HAL_SDRAM_MODULE_ENABLED
  272. #include "stm32f7xx_hal_sdram.h"
  273. #endif /* HAL_SDRAM_MODULE_ENABLED */
  274. #ifdef HAL_HASH_MODULE_ENABLED
  275. #include "stm32f7xx_hal_hash.h"
  276. #endif /* HAL_HASH_MODULE_ENABLED */
  277. #ifdef HAL_I2C_MODULE_ENABLED
  278. #include "stm32f7xx_hal_i2c.h"
  279. #endif /* HAL_I2C_MODULE_ENABLED */
  280. #ifdef HAL_I2S_MODULE_ENABLED
  281. #include "stm32f7xx_hal_i2s.h"
  282. #endif /* HAL_I2S_MODULE_ENABLED */
  283. #ifdef HAL_IWDG_MODULE_ENABLED
  284. #include "stm32f7xx_hal_iwdg.h"
  285. #endif /* HAL_IWDG_MODULE_ENABLED */
  286. #ifdef HAL_LPTIM_MODULE_ENABLED
  287. #include "stm32f7xx_hal_lptim.h"
  288. #endif /* HAL_LPTIM_MODULE_ENABLED */
  289. #ifdef HAL_LTDC_MODULE_ENABLED
  290. #include "stm32f7xx_hal_ltdc.h"
  291. #endif /* HAL_LTDC_MODULE_ENABLED */
  292. #ifdef HAL_PWR_MODULE_ENABLED
  293. #include "stm32f7xx_hal_pwr.h"
  294. #endif /* HAL_PWR_MODULE_ENABLED */
  295. #ifdef HAL_QSPI_MODULE_ENABLED
  296. #include "stm32f7xx_hal_qspi.h"
  297. #endif /* HAL_QSPI_MODULE_ENABLED */
  298. #ifdef HAL_RNG_MODULE_ENABLED
  299. #include "stm32f7xx_hal_rng.h"
  300. #endif /* HAL_RNG_MODULE_ENABLED */
  301. #ifdef HAL_RTC_MODULE_ENABLED
  302. #include "stm32f7xx_hal_rtc.h"
  303. #endif /* HAL_RTC_MODULE_ENABLED */
  304. #ifdef HAL_SAI_MODULE_ENABLED
  305. #include "stm32f7xx_hal_sai.h"
  306. #endif /* HAL_SAI_MODULE_ENABLED */
  307. #ifdef HAL_SD_MODULE_ENABLED
  308. #include "stm32f7xx_hal_sd.h"
  309. #endif /* HAL_SD_MODULE_ENABLED */
  310. #ifdef HAL_SPDIFRX_MODULE_ENABLED
  311. #include "stm32f7xx_hal_spdifrx.h"
  312. #endif /* HAL_SPDIFRX_MODULE_ENABLED */
  313. #ifdef HAL_SPI_MODULE_ENABLED
  314. #include "stm32f7xx_hal_spi.h"
  315. #endif /* HAL_SPI_MODULE_ENABLED */
  316. #ifdef HAL_TIM_MODULE_ENABLED
  317. #include "stm32f7xx_hal_tim.h"
  318. #endif /* HAL_TIM_MODULE_ENABLED */
  319. #ifdef HAL_UART_MODULE_ENABLED
  320. #include "stm32f7xx_hal_uart.h"
  321. #endif /* HAL_UART_MODULE_ENABLED */
  322. #ifdef HAL_USART_MODULE_ENABLED
  323. #include "stm32f7xx_hal_usart.h"
  324. #endif /* HAL_USART_MODULE_ENABLED */
  325. #ifdef HAL_IRDA_MODULE_ENABLED
  326. #include "stm32f7xx_hal_irda.h"
  327. #endif /* HAL_IRDA_MODULE_ENABLED */
  328. #ifdef HAL_SMARTCARD_MODULE_ENABLED
  329. #include "stm32f7xx_hal_smartcard.h"
  330. #endif /* HAL_SMARTCARD_MODULE_ENABLED */
  331. #ifdef HAL_WWDG_MODULE_ENABLED
  332. #include "stm32f7xx_hal_wwdg.h"
  333. #endif /* HAL_WWDG_MODULE_ENABLED */
  334. #ifdef HAL_PCD_MODULE_ENABLED
  335. #include "stm32f7xx_hal_pcd.h"
  336. #endif /* HAL_PCD_MODULE_ENABLED */
  337. #ifdef HAL_HCD_MODULE_ENABLED
  338. #include "stm32f7xx_hal_hcd.h"
  339. #endif /* HAL_HCD_MODULE_ENABLED */
  340. #ifdef HAL_DFSDM_MODULE_ENABLED
  341. #include "stm32f7xx_hal_dfsdm.h"
  342. #endif /* HAL_DFSDM_MODULE_ENABLED */
  343. #ifdef HAL_DSI_MODULE_ENABLED
  344. #include "stm32f7xx_hal_dsi.h"
  345. #endif /* HAL_DSI_MODULE_ENABLED */
  346. #ifdef HAL_JPEG_MODULE_ENABLED
  347. #include "stm32f7xx_hal_jpeg.h"
  348. #endif /* HAL_JPEG_MODULE_ENABLED */
  349. #ifdef HAL_MDIOS_MODULE_ENABLED
  350. #include "stm32f7xx_hal_mdios.h"
  351. #endif /* HAL_MDIOS_MODULE_ENABLED */
  352. #ifdef HAL_SMBUS_MODULE_ENABLED
  353. #include "stm32f7xx_hal_smbus.h"
  354. #endif /* HAL_SMBUS_MODULE_ENABLED */
  355. #ifdef HAL_MMC_MODULE_ENABLED
  356. #include "stm32f7xx_hal_mmc.h"
  357. #endif /* HAL_MMC_MODULE_ENABLED */
  358. /* Exported macro ------------------------------------------------------------*/
  359. #ifdef USE_FULL_ASSERT
  360. /**
  361. * @brief The assert_param macro is used for function's parameters check.
  362. * @param expr: If expr is false, it calls assert_failed function
  363. * which reports the name of the source file and the source
  364. * line number of the call that failed.
  365. * If expr is true, it returns no value.
  366. * @retval None
  367. */
  368. #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
  369. /* Exported functions ------------------------------------------------------- */
  370. void assert_failed(uint8_t* file, uint32_t line);
  371. #else
  372. #define assert_param(expr) ((void)0)
  373. #endif /* USE_FULL_ASSERT */
  374. #ifdef __cplusplus
  375. }
  376. #endif
  377. #endif /* __STM32F7xx_HAL_CONF_H */
  378. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/