Support auto creating missing VLANs with names from a table.
V5.2.0.11
Cannot create VLANs Cannot set Egress/Untagged for VLAN 1 May have an issue w/ adding and removing a port from egress/untagged in the same command.
Can set VLAN names
SNMPv3 does not support 3DES or AES encryption. Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol
Fixed user of admin. Auth key is the same as web admin password.
SNMPv3 does not support 3DES or AES encryption. Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol
If you modify the egress ports, it will automatically ALSO set the bits for untagged (despite them being “correct” before). Currently, you have to run the tool a second time to set the untagged config properly.
Does not list VLANs in dot1qVlanStatus, must use dot1qVlanStaticName or dot1qVlanCreationTime to get list of VLANs.
V6.6.2.8
Fixed user of admin. Auth key is the same as web admin password.
SNMPv3 does not support 3DES or AES encryption. Supported: authProtocol=usmHMACSHAAuthProtocol, privProtocol=usmDESPrivProtocol
If you modify the egress ports, it will automatically ALSO set the bits for untagged (despite them being “correct” before). Currently, you have to run the tool a second time to set the untagged config properly.
Does not list VLAN 1 under dot1qVlanStaticName.