Implement a secure ICS protocol targeting LoRa Node151 microcontroller for controlling irrigation.

John-Mark Gurney 52316ea2cc add an include guard...		2 år sedan
loramac	add pin description, and use the analog pin to provide randomness..	3 år sedan
mk	get the basic rs485 to cdc gateway working...	2 år sedan
rs485hid	get the basic rs485 to cdc gateway working...	2 år sedan
stm32	add adc and flash HAL files, delete customhid, as it won't be used..	2 år sedan
strobe	add the start of the C version for the uC...	3 år sedan
.gitignore	ignore my standard venv dir name..	2 år sedan
EXCLUDEST.txt	add warning about the license excluding use by ST.	2 år sedan
LICENSE.txt	add warning about the license excluding use by ST.	2 år sedan
LORA-IRR.md	break up the README to an overview and the parts..	2 år sedan
Makefile	move more into mu.progs.mk, reorder depends..	2 år sedan
NOTES.md	add info on how to debug irq handler issues..	2 år sedan
PROTOCOL.md	mention the specific curve/dh used..	2 år sedan
README.md	get the basic rs485 to cdc gateway working...	2 år sedan
RS485HID.md	get the basic rs485 to cdc gateway working...	2 år sedan
arch.getxt	add some diagrams, and the infrastructure to make them...	3 år sedan
board-config.h	get tx/rx working between two Node151's..	3 år sedan
board.c	missed setting up routing for the analog pin..	3 år sedan
box.sh	add some diagrams, and the infrastructure to make them...	3 år sedan
comms.c	implement the C (responder) side of ecdhe...	2 år sedan
comms.h	add an include guard...	2 år sedan
conns.getxt	add some diagrams, and the infrastructure to make them...	3 år sedan
hal_generic.c	use SYSINIT and break things out/make more generic and modular...	2 år sedan
irr_main.c	forgot to fix this to compile w/ new api	2 år sedan
linker_set.h	add framework to get things started...	2 år sedan
lora.py	s/liblora/libsyote/ s/lora_comms/syote_comms/	2 år sedan
loraserv.py	make sure we don't buffer the serial port, we need the packets to	3 år sedan
main.c	use funopen/stdio to buffer output, "fix" for FreeBSD...	2 år sedan
misc.c	use funopen/stdio to buffer output, "fix" for FreeBSD...	2 år sedan
misc.h	add memory debug buffer.. Fix FreeBSD by adding a delay..	2 år sedan
multicast.py	drop debug print	2 år sedan
requirements.txt	add the required python packages..	3 år sedan
si_usb.c	get the basic rs485 to cdc gateway working...	2 år sedan
si_usb.h	add wrapper, si_usb.h, clean up si_usb a little, and use wrapper	2 år sedan
strobe_rng_init.c	use sbrk(0) instead of end to get the uninitalized memory...	3 år sedan
strobe_rng_init.h	add support for saving PRNG state to EEPROM...	3 år sedan
syote_comms.py	s/liblora/libsyote/ s/lora_comms/syote_comms/	2 år sedan
sysIrqHandlers.h	get tx/rx working between two Node151's..	3 år sedan
sysinit.c	add framework to get things started...	2 år sedan
sysinit.h	make compile w/o other header pollution..	2 år sedan
util.py	forgot to add the copyright for this file..	3 år sedan
util_load.py	change the default to be func..	3 år sedan

README.md

Syote: Secure IoT

This project started off as a project to control an irrigation system via a LoRa radio, but the core architecture of the communication and security can easily be reused for other projects.

The projects that make use of the core protocol are included in this repo to make development easier for now, but if/when the project gets large enough, they will be broken out into their own repositories.

Projects

LoRa Irrigation: Control over LoRa radio.

RS-485 USB HID KVM: USB Keyboard over RS-485

File Layout

Note that things are a mess as they stand right now. The first project was based upon the SemTech reference code which implemented their own HAL on top of ST’s HAL which is partly implemented on top of ARM’s HAL, and in some cases bypasses them. It was also originally written not expecting to be used for another board.

loramac/ - SemTech reference code. Has reference code for LoRa and the Node151 based board. mk/ - Files supporting the build infrastructure. rs485hid/ - Files relating to the RS-485 HID project stm32/ - This is the HAL for ST based parts. It comtains the ARM CMSIS HAL as well, for the parts the ST chose to use. strobe/ - Crypto code that form the basis of the protocol.

Options

Default on: STROBE - This contains all the cryptography parts. SYSINIT - This contains the initalization frmae work, similar to FreeBSD.

Default off: NODE151 - Code necessary for the Heltech Node151 module. RS485FRAME - Code implementing framing tx/rx over RS-485. STM32F103 - Code for a STM32F103 based board. SX1276 - Code necessary for the LoRa Radio. USB_CDC - Code for implementing a USB CDC Endpoint.